Non-resorbable glass fibre-reinforced composite with porous surface as bone substitute material: Experimental studies in vitro and in vivo focused on bone-implant interface

The development of load-bearing osseous implant with desired mechanical and surface properties in order to promote incorporation with bone and to eliminate risk of bone resorption and implant failure is a very challenging task. Bone formation and resoption processes depend on the mechanical environment. Certain stress/strain conditions are required to promote new bone growth and to prevent bone mass loss. Conventional metallic implants with high stiffness carry most of the load and the surrounding bone becomes virtually unloaded and inactive. Fibre-reinforced composites offer an interesting alternative to metallic implants, because their mechanical properties can be tailored to be equal to those of bone, by the careful selection of matrix polymer, type of fibres, fibre volume fraction, orientation and length. Successful load transfer at bone-implant interface requires proper fixation between the bone and implant. One promising method to promote fixation is to prepare implants with porous surface. Bone ingrowth into porous surface structure stabilises the system and improves clinical success of the implant. The experimental part of this work was focused on polymethyl methacrylate (PMMA) -based composites with dense load-bearing core and porous surface. Three-dimensionally randomly orientated chopped glass fibres were used to reinforce the composite. A method to fabricate those composites was developed by a solvent treatment technique and some characterisations concerning the functionality of the surface structure were made in vitro and in vivo. Scanning electron microscope observations revealed that the pore size and interconnective porous architecture of the surface layer of the fibre-reinforced composite (FRC) could be optimal for bone ingrowth. Microhardness measurements showed that the solvent treatment did not have an effect on the mechanical properties of the load-bearing core. A push-out test, using dental stone as a bone model material, revealed that short glass fibre-reinforced porous surface layer is strong enough to carry load. Unreacted monomers can cause the chemical necrosis of the tissue, but the levels of leachable resisidual monomers were considerably lower than those found in chemically cured fibre-reinforced dentures and in modified acrylic bone cements. Animal experiments proved that surface porous FRC implant can enhance fixation between bone and FRC. New bone ingrowth into the pores was detected and strong interlocking between bone and the implant was achieved.

Magni ducatus Finlandiae Russiae partim, partim Sueciae subjecti; Sinus item Bothnici ac Finnici nova et accurata delineatio. Calamo et sumtibus Tobiae Conradi Lotter, Geogr. Aug. Vind. Cum Priv. S. Vic. in part. Rheni Suev. et Franc. juris.

Mittakaava [N. 1:1800000]. - Ulkoasu: 1 kartta : vär. ; 48,5 x 56,7 cm, lehti 50,2 x 58,5 cm.

Magni ducatus Finlandiae Russiae partim, partim Sueciae subjecti; Sinus item Bothnici ac Finnici nova et accurata delineatio. Calamo et sumtibus Matthaei Seutteri, S.C.M. Geogr. Aug. Vind. Cum Priv. S. Vic. in part. Rheni Suev. et Franc. juris

Mittakaava: [N. 1:1800000]. - Ulkoasu: 1 kartta : vär. ; 49 x 57,8 cm, lehti 53,5 x 64,3 cm.

Carbon footprint as part of a company’s external environmental communication

The aim of this thesis was to find out how the carbon footprint calculations can be utilized in the company’s external environmental communication, what is the demand for carbon footprint from the market, and how the other actors in the forest industry have approached the issue. The aim was to recognize the best practises to communicate carbon footprints and to find possibilities to extend the UPM-Kymmene Wood Oy’s mill specific carbon footprints. This research included a literature review, an inquiry to the UPM-Kymmene Wood Oy’s sales offices, and Internet survey concerning the external environmental communication in the forest industry and three small case studies based on mill specific parameters. The inquiry to the sales offices showed that the carbon footprint is not yet a common demand from the customers in the wood product sector. In addition, the Internet survey showed that generally in the forest industry, not much has been done concerning carbon footprint communication so far. The biggest challenge in carbon footprint communication is the variation in the knowledge level of the receivers. In addition btob and btoc communication situations demand a different approach to the issue. Carbon profile brochures developed in the company can be seen as suitable for btob communication situations. Case studies have shown that the contribution of final product transport to the overall carbon footprint was significant. It was recommended to include post mill transport in the carbon footprint information supplied to the btob customers. When discussing environmental communication on a general level it can be stated that a good external environmental communication is based on facts, is open and proactive and takes into account the needs of the receiver. However, the openness and the quality of external environmental communication are essentially strategic decisions. The significance of internal communication as well as the knowhow in the communication and marketing networks play a major role in achieving success in external environmental communication. Carbon footprints are only one part of good balanced external environmental communication. One specific environmental feature like carbon footprint should not be over emphasized to the detriment of other important environmental aspects.

Spare part business analysis and development

The purpose of this Thesis was to comprehensively analyze and develop the spare part business in Company Oy’s five biggest product groups by searching development issues related to single spare parts’ supply chains as well as the spare part business process, make implementation plans for them and implement the plans when possible. The items were classified based on special characteristics of spare parts and on their actual sales volumes. The created item classes were examined for finding improvement possibilities. Management strategies for classified items were suggested. Vendors and customers were analyzed for supporting the comprehensive supply network development work. The effectiveness of the current spare part business process was analyzed in co-operation with the spare part teams in three business unit locations. Several items were taken away from inventories as uselessly stocked items. Price list related to core items with one of the main product group’s core item manufacturer was suggested to be expanded in Town A. Refinement equipment seal item supply chain management was seen important to develop in Town B. A new internal business process model was created for minimizing and enhancing the internal business between Company’s business units. SAP inventory reports and several other features were suggested to be changed or developed. Also the SAP data material management was seen very important to be developed continuously. Many other development issues related to spare parts’ supply chains and the work done in the business process were found. The need for investigating the development possibilities deeper became very clear during the project.

A northern summer; or travels round the Baltic, through Denmark, Sweden, Russia, Prussia, and part of Germany in the year 1804 : by John Carr, esq.

Dedicated to: James Mackintosh.

Travels in various countries of Europe, Asia and Africa : Part the third : Scandinavia : Section the second : by Edward Daniel Clarke.

Digital reproduction, The National Library of Finland, Centre for Preservation and Digitisation, Mikkeli

Travels in various countries of Europe, Asia and Africa : Part the third : Scandinavia : Section the first : by Edward Daniel Clarke.

Digital reproduction, The National Library of Finland, Centre for Preservation and Digitisation, Mikkeli

Customer reference marketing and utilization of social media as an integral part of customer references

The objective of this Bachelor's Thesis is to find out the role of social media in the B-to-B marketing environment of the information technology industry and to discover how IT-firms utilize social media as a part of their customer reference marketing. To reach the objectives the concepts of customer reference marketing and social media are determined. Customer reference marketing can be characterized as one of the most practically relevant but academically relatively overlooked ways in which a company can leverage its customers and delivered solutions and use them as references in its marketing activities. We will cover which external and internal functions customer references have, that contribute to the growth and performance of B-to-B firms. We also address the three mechanisms of customer reference marketing which are 'status transfer', 'validation through testimonials' and 'demonstration of experience and prior performance'. The concept of social media stands for social interaction and creation of user-based content which exclusively occurs through Internet. The social media are excellent tools for networking because of the fast and easy access, easy interaction and vast amount of multimedia attributes. The allocation of social media is determined. The case company helps clarify the specific characteristics of social media usage as part of customer-reference-marketing activities. For IT-firms the best channels to utilize social media in their customer reference marketing activities are publishing and distribution services of content and networking services.

Hitsauskoneen kunnonvalvontajärjestelmän kehittäminen

Teollisuuden kasvavien laatuvaatimusten johdosta valmistava teollisuus joutuu tiukentamaan laatuvaatimuksiaan täyttääkseen asiakasvaatimukset. Laatujärjestelmät asettavat valmistajille erilaisia vaatimuksia, kuten valmistuksessa käytettävien laitteistojen huoltodokumentaatioiden tuottaminen. Standardi SFS-EN ISO 3834-2 Metallien sulahitsauksen laatuvaatimukset: Kattavat laatuvaatimukset tuo edellä mainitut vaatimukset myös hitsaustuotantoon. Ennakoivaa kunnossapitoa käytetään monilla teollisuuden aloilla, koska tuotannon yllättävät keskeytymiset halutaan ennaltaehkäistä. Käsinhitsaukseen ei ole ollut toistaiseksi työkaluja, jotka mahdollistaisivat ennakoivan kunnossapidon hitsauskoneille. Kemppi Oy kehittää hitsauksen monitorointiratkaisua, jonka yhtenä päämääränä on kunnonvalvontajärjestelmän kehittäminen hitsauslaitteistolle. Järjestelmä ottaa huomioon myös laatujärjestelmien asettamat vaatimukset hitsauskoneiden huoltodokumentaation tuottamisesta. Diplomityön tavoitteena oli tehdä vaatimusmäärittely hitsauskoneiden kunnonvalvontajärjestelmälle. Tässä diplomityössä perehdyttiin kunnossapidon ja vikaantumisen lajeihin, laatujärjestelmiin sekä hitsauslaitteistoon. Tutkimuksessa syvennyttiin hitsauskoneiden kunnossapidon ja vikaantumistapauksien kautta suunnitteilla olevan järjestelmän tarpeisiin. Haastatteluiden avulla kartoitettiin hitsauslaitteiden kunnonvalvontajärjestelmältä vaadittavia piirteitä, järjestelmälle asetettavia vaatimuksia sekä järjestelmän monitorointikohteita. Tutkimuksen pohjalta laadittuun vaatimusmäärittelyyn saatiin muodostettua toiminnalliset vaatimukset, joista muodostetaan tuotekehityksen aikana tuotteen ominaisuudet. Lisäksi vaatimusmäärittelyyn luotiin käyttäjäryhmät, käyttötapaukset sekä alustavat monitorointikohteet. Vaatimusten täyttämiseksi kunnonvalvontajärjestelmään on suunnitteilla myös laitetietokanta, johon sisällytetään hitsauslaitteille suoritettujen huoltojen ja validointien tiedot. Varsinaisen tuotekehitystyön alkaessa nyt laadittua vaatimusmäärittelyä tullaan käyttämään suuntaviivojen näyttäjänä projektissa.

Social work in Palestine : part 2 : case management

Arabiankielinen