Integration of microgrids into electricity distribution networks

Existing electricity distribution system is under pressure because implementation of distributed generation changes the grid configuration and also because some customers demand for better distribution reliability. In a short term, traditional network planning does not offer techno-economical solutions for the challenges and therefore the idea of microgrids is introduced. Islanding capability of microgrids is expected to enable better reliability by reducing effects of faults. The aim of the thesis is to discuss challenges in integration of microgrids into distribution networks. Study discusses development of microgrid related smart grid features and gives estimation of the guideline of microgrid implementation. Thesis also scans microgrid pilots around the world and introduces the most relevant projects. Analysis reveals that the main focus of researched studies is on low voltage microgrids. This thesis extends the idea to medium voltage distribution system and introduces challenges related to medium voltage microgrid implementation. Differences of centralized and distributed microgrid models are analyzed and the centralized model is discovered to be easiest to implement into existing distribution system. Preplan of medium voltage microgrid pilot is also carried out in this thesis.

Integration or a Greek tragedy?: How crisis spillovers affect Central and Eastern European States

Tutkielma siitä, miten Euroopan entisten sosialistivaltioiden markkinoiden integroituminen on edistynyt Kreikan ja EMU-alueen kanssa euron käyttöönoton ajalta. Tutkimus vertaa maiden markkinoiden reaktioita Kreikasta ja EMU-alueelta kantautuviin sokkeihin ennen ja jälkeen vuonna 2007 alkanutta kriisiä.

Organizational mechanisms and conditions of individuals for knowledge sharing in post-acquisition integration

The challenges of knowledge sharing after cross-border acquisitions are widely recognised. The study took a new view to the subject by applying a two-level framework provided by the knowledge governance approach. The purpose of the study was to investigate the effects of organizational mechanisms on the conditions of individuals for knowledge sharing in post-acquisition integration context. Qualitative research methods were used in this case study. Individual interviews were performed within an international firm after a recent cross-border acquisition. The results showed that integrators, the rotation of the personnel from the acquiring firm and visits and meetings enhance the conditions at the individual level for knowledge sharing after the acquisition. Respectively, strategic change, matrix structure and foreign HRM practices challenge the conditions at the individual level for knowledge sharing in the early post-acquisition integration phase. The findings are supported by the prior research on knowledge management in acquisitions. In particular, the study enlightens how organizational level actions influence the conditions of individuals for knowledge sharing. The study suggests that organizations should adjust organizational mechanisms to support the conditions of individuals, in order to promote knowledge sharing in the early phase of the integration.

The Finnish Paper Workers' Union at a crossroads: Labor union representativeness in a changing environment, 1980-2008

This thesis consists of four articles and an introductory section. The main research questions in all the articles refer to the changes in the representativeness of the Finnish Paper Workers' Union. Representativeness stands for the entire entity of external, internal, legal and reputational factors that enable the labor union to represent its members and achieve its goals. This concept is based on an extensive reading of quantitative and qualitative industrial relations literature, which includes works based on Marxist labor-capital relations (such as Hyman's industrial relations studies), and more recent union density studies as well as gender- and ethnic diversity-based 'union revitalization' studies. Müller-Jentsch's German studies of industrial relations have been of particular importance as well as Streeck's industrial unionism and technology studies. The concept of representativeness is an attempt to combine the insights of these diverse strands of literature and bring the scientific discussion of labor unions back to the core of a union's function: representing its members. As such, it can be seen as a theoretical innovation. The concept helps to acknowledge both the heterogeneity of the membership and the totality of a labor union organization. The concept of representativeness aims to move beyond notions of 'power'. External representativeness can be expressed through the position of the labor union in the industrial relations system and the economy. Internal representativeness focuses on the aspects of labor unions that relate to the function of the union as an association with members, such as internal democracy. Legal representativeness lies in the formal legal position of the union – its rights and instruments. This includes collective bargaining legislation, co-decision rules and industrial conflict legislation. Reputational representativeness is related to how the union is seen by other actors and the general public, and can be approximated using data on strike activity. All these aspects of representativeness are path-dependent, and show the results of previous struggles over issues. The concept of representativeness goes beyond notions of labor union power and symbolizes an attempt to bring back the focus of industrial relations studies to the union's basic function of representing its members. The first article shows in detail the industrial conflict of the Finnish paper industry in 2005. The intended focus was the issue of gender in the negotiations over a new collective agreement, but the focal point of the industrial conflict was the issue of outsourcing and how this should be organized. Also, the issue of continuous shifts as an issue of working time was very important. The drawn-out conflict can be seen as a struggle over principles, and under pressure the labor union had to concede ground on the aforementioned issues. The article concludes that in this specific conflict, the union represented its' female members to a lesser extent, because the other issues took such priority. Furthermore, because of the substantive concessions. the union lost some of its internal representativeness, and the stubbornness of the union may have even harmed the reputation of the union. This article also includes an early version of the representativeness framework, through which this conflict is analyzed. The second article discusses wage developments, union density and collective bargaining within the context of representativeness. It is shown that the union has been able to secure substantial benefits for its members, regardless of declining employment. Collective agreements have often been based on centralized incomes policies, but the paper sector has not always joined these. Attention is furthermore paid to the changing competition of the General Assembly, with a surprisingly strong position of the Left Alliance still. In an attempt to replicate analysis of union density measures, an analysis of sectoral union density shows that similar factors as in aggregate data influence this measure, though – due to methodological issues – the results may not be robust. On this issue, it can be said that the method of analysis for aggregate union density is not suitable for sectoral union density analysis. The increasingly conflict-ridden industrial relations predicted have not actually materialized. The article concludes by asking whether the aim of ever-increasing wages is a sustainable one in the light of the pressures of globalization, though wage costs are a relatively small part of total costs. The third article discusses the history and use of outsourcing in the Finnish paper industry. It is shown using Hyman's framework of constituencies that over time, the perspective of the union changed from 'members of the Paper Workers' Union' to a more specific view of who is a core member of the union. Within the context of the industrial unionism that the union claims to practice, this is an important change. The article shows that the union more and more caters for a core group, while auxiliary personnel is less important to the union's identity and constituencies, which means that the union's internal representativeness has decreased. Maintenance workers are an exception; the union and employers have developed a rotating system that increases the efficient allocation of these employees. The core reason of the exceptional status of maintenance personnel is their high level of non-transferable skills. In the end it is debatable whether the compromise on outsourcing solves the challenges facing the industry. The fourth article shows diverging discourses within the union with regard to union-employer partnership for competitiveness improvements and instruments of local union representatives. In the collective agreement of 2008, the provision regulating wage effects of significant changes in the organization or content of work was thoroughly changed, though this mainly reflected decisions by the Labor Court on the pre-2008 version of the provision. This change laid bare the deep rift between the Social Democratic and Left Alliance (ex-Communist) factions of the union. The article argues that through the changed legal meaning of the provision, the union was able to transform concession bargaining into a basis for partnership. The internal discontent about this issue is nonetheless substantial and a threat to the unity of the union, both locally and at the union level. On the basis of the results of the articles, other factors influencing representativeness, such as technology and EU law and an overview of the main changes in the Finnish paper industry, it is concluded that, especially in recent years, the Finnish Paper Workers' Union has lost some of its representativeness. In particular, the loss of the efficiency of strikes is noted, the compromise on outsourcing which may have alienated a substantial part of the union's membership, and the change in the collective agreement of 2008 have caused this decline. In the latter case, the internal disunion on that issue shows the constraints of the union's internal democracy. Furthermore, the failure of the union to join the TEAM industrial union (by democratic means), the internal conflicts and a narrow focus on its own sector may also hurt the union in the future, as the paper industry in Finland is going through a structural change. None of these changes in representativeness would have been so drastic without the considerable pressure of globalization - in particular changing markets, changing technology and a loss of domestic investments to foreign investments, which in the end have benefited the corporations more than the Finnish employees of these corporations. Taken together, the union risks becoming socially irrelevant in time, though it will remain formally very strong on the basis of its institutional setting and financial situation.

Integration in project business : mechanisms for integrating customers and the project network during the life-cycle of industrial projects

This thesis focuses on integration in project business, i.e. how projectbased companies organize their product and process structures when they deliver industrial solutions to their customers. The customers that invest in these solutions run their businesses in different geographical, political and economical environments, which should be acknowledged by the supplier when providing solutions comprising of larger and more complex scopes than previously supplied to these customers. This means that the suppliers are increasing their supply range by taking over some of the activities in the value chain that have traditionally been handled by the customer. In order to be able to provide the functioning solutions, including more engineering hours, technical equipment and a wider project network, a change is needed in the mindset in order to be able to carry out and take the required responsibility that these new approaches bring. For the supplier it is important to be able to integrate technical products, systems and services, but the supplier also needs to have the capabilities to integrate the cross-functional organizations and departments in the project network, the knowledge and information between and within these organizations and departments, along with inputs from the customer into the product and process structures during the lifecycle of the project under development. Hence, the main objective of this thesis is to explore the challenges of integration that industrial projects meet, and based on that, to suggest a concept of how to manage integration in project business by making use of integration mechanisms. Integration is considered the essential process for accomplishing an industrial project, whereas the accomplishment of the industrial project is considered to be the result of the integration. The thesis consists of an extended summary and four papers, that are based on three studies in which integration mechanisms for value creation in industrial project networks and the management of integration in project business have been explored. The research is based on an inductive approach where in particular the design, commissioning and operations functions of industrial projects have been studied, addressing entire project life-cycles. The studies have been conducted in the shipbuilding and power generation industries where the scopes of supply consist of stand-alone equipment, equipment and engineering, and turnkey solutions. These industrial solutions include demanding efforts in engineering and organization. Addressing the calls for more studies on the evolving value chains of integrated solutions, mechanisms for inter- and intra-organizational integration and subsequent value creation in project networks have been explored. The research results in thirteen integration mechanisms and a typology for integration is proposed. Managing integration consists of integrating the project network (the supplier and the sub-suppliers) and the customer (the customer’s business purpose, operations environment and the end-user) into the project by making use of integration mechanisms. The findings bring new insight into research on industrial project business by proposing integration of technology and engineering related elements with elements related to customer oriented business performance in contemporary project environments. Thirteen mechanisms for combining products and the processes needed to deliver projects are described and categorized according to the impact that they have on the management of knowledge and information. These mechanisms directly relate to the performance of the supplier, and consequently to the functioning of the solution that the project provides. This thesis offers ways to promote integration of knowledge and information during the lifecycle of industrial projects, enhancing the development towards innovative solutions in project business.

Information integration and its impacts on logistics performance - Using information technology and systems to facilitate information integration

Fast changing environment sets pressure on firms to share large amount of information with their customers and suppliers. The terms information integration and information sharing are essential for facilitating a smooth flow of information throughout the supply chain, and the terms are used interchangeably in research literature. By integrating and sharing information, firms want to improve their logistics performance. Firms share information with their suppliers and customers by using traditional communication methods (telephone, fax, Email, written and face-to-face contacts) and by using advanced or modern communication methods such as electronic data interchange (EDI), enterprise resource planning (ERP), web-based procurement systems, electronic trading systems and web portals. Adopting new ways of using IT is one important resource for staying competitive on the rapidly changing market (Saeed et al. 2005, 387), and an information system that provides people the information they need for performing their work, will support company performance (Boddy et al. 2005, 26). The purpose of this research has been to test and understand the relationship between information integration with key suppliers and/or customers and a firm’s logistics performance, especially when information technology (IT) and information systems (IS) are used for integrating information. Quantitative and qualitative research methods have been used to perform the research. Special attention has been paid to the scope, level and direction of information integration (Van Donk & van der Vaart 2005a). In addition, the four elements of integration (Jahre & Fabbe-Costes 2008) are closely tied to the frame of reference. The elements are integration of flows, integration of processes and activities, integration of information technologies and systems and integration of actors. The study found that information integration has a low positive relationship to operational performance and a medium positive relationship to strategic performance. The potential performance improvements found in this study vary from efficiency, delivery and quality improvements (operational) to profit, profitability or customer satisfaction improvements (strategic). The results indicate that although information integration has an impact on a firm’s logistics performance, all performance improvements have not been achieved. This study also found that the use of IT and IS have a mediocre positive relationship to information integration. Almost all case companies agreed on that the use of IT and IS could facilitate information integration and improve their logistics performance. The case companies felt that an implementation of a web portal or a data bank would benefit them - enhance their performance and increase information integration.

Searching for keys to successful post-merger integration : a longitudinal case-study following a public sector merger

Unsuccessful mergers are unfortunately the rule rather than the exception. Therefore it is necessary to gain an enhanced understanding of mergers and post-merger integrations (PMI) as well as learning more about how mergers and PMIs of information systems (IS) and people can be facilitated. Studies on PMI of IS are scarce and public sector mergers are even less studied. There is nothing however to indicate that public sector mergers are any more successful than those in the private sector. This thesis covers five studies carried out between 2008 and 2011 in two organizations in higher education that merged in January 2010. The most recent study was carried out two years after the new university was established. The longitudinal case-study focused on the administrators and their opinions of the IS, the work situation and the merger in general. These issues were investigated before, during and after the merger. Both surveys and interviews were used to collect data, to which were added documents that both describe and guide the merger process; in this way we aimed at a triangulation of findings. Administrators were chosen as the focus of the study since public organizations are highly dependent on this staff category, forming the backbone of the organization and whose performance is a key success factor for the organization. Reliable and effective IS are also critical for maintaining a functional and effective organization, and this makes administrators highly dependent on their organizations’ IS for the ability to carry out their duties as intended. The case-study has confirmed the administrators’ dependency on IS that work well. A merger is likely to lead to changes in the IS and the routines associated with the administrators’ work. Hence it was especially interesting to study how the administrators viewed the merger and its consequences for IS and the work situation. The overall research objective is to find key issues for successful mergers and PMIs. The first explorative study in 2008 showed that the administrators were confident of their skills and knowledge of IS and had no fear of having to learn new IS due to the merger. Most administrators had an academic background and were not anxious about whether IS training would be given or not. Before the merger the administrators were positive and enthusiastic towards the merger and also to the changes that they expected. The studies carried out before the merger showed that these administrators were very satisfied with the information provided about the merger. This information was disseminated through various channels and even negative information and postponed decisions were quickly distributed. The study conflicts with the theories that have found that resistance to change is inevitable in a merger. Shortly after the merger the (third) study showed disappointment with the fact that fewer changes than expected had been implemented even if the changes that actually were carried out sometimes led to a more problematic work situation. This was seen to be more prominent for routine changes than IS changes. Still the administrators showed a clear willingness to change and to share their knowledge with new colleagues. This knowledge sharing (also tacit) worked well in the merger and the PMI. The majority reported that the most common way to learn to use new ISs and to apply new routines was by asking help from colleagues. They also needed to take responsibility for their own training and development. Five months after the merger (the fourth study) the administrators had become worried about the changes in communication strategy that had been implemented in the new university. This was perceived as being more anonymous. Furthermore, it was harder to get to know what was happening and to contact the new decision makers. The administrators found that decisions, and the authority to make decisions, had been moved to a higher administrative level than they were accustomed to. A directive management style is recommended in mergers in order to achieve a quick transition without distracting from the core business. A merger process may be tiresome and require considerable effort from the participants. In addition, not everyone can make their voice heard during a merger and consensus is not possible in every question. It is important to find out what is best for the new organization instead of simply claiming that the tried and tested methods of doing things should be implemented. A major problem turned out to be the lack of management continuity during the merger process. Especially problematic was the situation in the IS-department with many substitute managers during the whole merger process (even after the merger was carried out). This meant that no one was in charge of IS-issues and the PMI of IS. Moreover, the top managers were appointed very late in the process; in some cases after the merger was carried out. This led to missed opportunities for building trust and management credibility was heavily affected. The administrators felt neglected and that their competences and knowledge no longer counted. This, together with a reduced and altered information flow, led to rumours and distrust. Before the merger the administrators were convinced that their achievements contributed value to their organizations and that they worked effectively. After the merger they were less sure of their value contribution and effectiveness even if these factors were not totally discounted. The fifth study in November 2011 found that the administrators were still satisfied with their IS as they had been throughout the whole study. Furthermore, they believed that the IS department had done a good job despite challenging circumstances. Both the former organizations lacked IS strategies, which badly affected the IS strategizing during the merger and the PMI. IS strategies deal with issues like system ownership; namely who should pay and who is responsible for maintenance and system development, for organizing system training for new IS, and for effectively run IS even during changing circumstances (e.g. more users). A proactive approach is recommended for IS strategizing to work. This is particularly true during a merger and PMI for handling issues about what ISs should be adopted and implemented in the new organization, issues of integration and reengineering of IS-related processes. In the new university an ITstrategy had still not been decided 26 months after the new university was established. The study shows the importance of the decisive management of IS in a merger requiring that IS issues are addressed in the merger process and that IS decisions are made early. Moreover, the new management needs to be appointed early in order to work actively with the IS-strategizing. It is also necessary to build trust and to plan and make decisions about integration of IS and people.

The us subprime crisis and stock market integration: evidence from the BRICS

The aim of this study is to examine the level of stock market co-movement in the BRICS countries and three major industrialized countries (Japan, UK and USA). While analyzing the interdependence and integration of markets, two subsets are examined: before (2000 – 2007) and during the global financial crisis (2007-2011). Generally, interdependence across markets is likely to increase during a highly volatile period. This is problematic because if it were true, the main benefit of international diversification would be reduced at times when it is most needed. The results reveal the dominant role of the US financial markets over the examined time period. Empirical studies of this research paper indicate that cross-market linkages have become slightly stronger during the ongoing subprime crisis than before crisis. However, results also show that an investor may obtain some international diversification benefits by investing especially in the BRICS countries despite the fact of unstable economic condition and growing globalization.

Pipework data in design system integration

This thesis work describes the creation of a pipework data structure for design system integration. Work is completed in pulp and paper plant delivery company with global engineering network operations in mind. User case of process design to 3D pipework design is introduced with influence of subcontracting engineering offices. Company data element list is gathered by using key person interviews and results are processed into a pipework data element list. Inter-company co-operation is completed in standardization association and common standard for pipework data elements is found. As result inter-company created pipework data element list is introduced. Further list usage, development and relations to design software vendors are evaluated.

Service innovation development and knowledge integration practices - a comparative case study on KIBS sector

Academic research on services and innovations on services has significantly grown during recent years. So far research concerning management of knowledge intensive work on service development activities is very limited. The objective of this study was to examine knowledge integration practices that support service innovation development and to the best of knowledge such studies have not been previously published in academic literature. In the theoretical part of the study a review of state‐of‐the‐art literature was conducted, research gap was indicated and a framework for analysis was built. In the empirical part an explorative comparative multi‐case study was carried out in KIBS sector. Four companies were selected and four service development projects were inspected. The service development activities and knowledge integration practices were identified. The cases were carefully compared and results formed. The empirical results indicated that service innovation development is partly linear and partly incremental flow of activities where knowledge integration practices have important role supporting the planning and execution of tasks. Knowledge integration practices supporting planning and workshops are close interaction, interpretation, project planning and sequencing of work tasks. The identified knowledge integration practices supporting building service solution were careful role and competence management, routines and common knowledge. The main implication is that to manage knowledge intensive service innovation development a firm should carefully develop and choose relevant knowledge integration practices to support the service development activities.

Integration of existing military capability models into the Comprehensive Capability Meta-model

Abstract—This paper discusses existing military capability models and proposes a comprehensive capability meta-model (CCMM) which unites the existing capability models into an integrated and hierarchical whole. The Zachman Framework for Enterprise Architecture is used as a structure for the CCMM. The CCMM takes into account the abstraction level, the primary area of application, stakeholders, intrinsic process, and life cycle considerations of each existing capability model, and shows how the models relate to each other. The validity of the CCMM was verified through a survey of subject matter experts. The results suggest that the CCMM is of practical value to various capability stakeholders in many ways, such as helping to improve communication between the different capability communities.

Testing Platform Development for Large Scale Solar Integration

Currently, a high penetration level of Distributed Generations (DGs) has been observed in the Danish distribution systems, and even more DGs are foreseen to be present in the upcoming years. How to utilize them for maintaining the security of the power supply under the emergency situations, has been of great interest for study. This master project is intended to develop a control architecture for studying purposes of distribution systems with large scale integration of solar power. As part of the EcoGrid EU Smart Grid project, it focuses on the system modelling and simulation of a Danish representative LV network located in Bornholm island. Regarding the control architecture, two types of reactive control techniques are implemented and compare. In addition, a network voltage control based on a tap changer transformer is tested. The optimized results after applying a genetic algorithm to five typical Danish domestic loads are lower power losses and voltage deviation using Q(U) control, specially with large consumptions. Finally, a communication and information exchange system is developed with the objective of regulating the reactive power and thereby, the network voltage remotely and real-time. Validation test of the simulated parameters are performed as well.

Integration of Electronic Commerce and Enterprise Systems

The necessity of EC (Electronic Commerce) and enterprise systems integration is perceived from the integrated nature of enterprise systems. The proven benefits of EC to provide competitive advantages to the organizations force enterprises to adopt and integrate EC with their enterprise systems. Integration is a complex task to facilitate seamless flow of information and data between different systems within and across enterprises. Different systems have different platforms, thus to integrate systems with different platforms and infrastructures, integration technologies, such as middleware, SOA (Service-Oriented Architecture), ESB (Enterprise Service Bus), JCA (J2EE Connector Architecture), and B2B (Business-to-Business) integration standards are required. Huge software vendors, such as Oracle, IBM, Microsoft, and SAP suggest various solutions to address EC and enterprise systems integration problems. There are limited numbers of literature about the integration of EC and enterprise systems in detail. Most of the studies in this area have focused on the factors which influence the adoption of EC by enterprise or other studies provide limited information about a specific platform or integration methodology in general. Therefore, this thesis is conducted to cover the technical details of EC and enterprise systems integration and covers both the adoption factors and integration solutions. In this study, many literature was reviewed and different solutions were investigated. Different enterprise integration approaches as well as most popular integration technologies were investigated. Moreover, various methodologies of integrating EC and enterprise systems were studied in detail and different solutions were examined. In this study, the influential factors to adopt EC in enterprises were studied based on previous literature and categorized to technical, social, managerial, financial, and human resource factors. Moreover, integration technologies were categorized based on three levels of integration, which are data, application, and process. In addition, different integration approaches were identified and categorized based on their communication and platform. Also, different EC integration solutions were investigated and categorized based on the identified integration approaches. By considering different aspects of integration, this study is a great asset to the architectures, developers, and system integrators in order to integrate and adopt EC with enterprise systems.