The Sottunga-Jurmo shear zone : structure and deformation history of a crustal-scale ductile shear zone in SW Finland

The aim of this study is to gain a better understanding of the structure and the deformation history of a NW-SE trending regional, crustal-scale shear structure in the Åland archipelago, SW Finland, called the Sottunga-Jurmo shear zone (SJSZ). Approaches involving e.g. structural geology, geochronology, geochemistry and metamorphic petrology were utilised in order to reconstruct the overall deformation history of the study area. The study therefore describes several features of the shear zone including structures, kinematics and lithologies within the study area, the ages of the different deformation phases (ductile to brittle) within the shear zone, as well as some geothermobarometric results. The results indicate that the SJSZ outlines a major crustal discontinuity between the extensively migmatized rocks NE of the shear zone and the unmigmatised, amphibolite facies rocks SW of the zone. The main SJSZ shows overall dextral lateral kinematics with a SW-side up vertical component and deformation partitioning into pure shear and simple shear dominated deformation styles that was intensified toward later stages of the deformation history. The deformation partitioning resulted in complex folding and refolding against the SW margin of the SJSZ, including conical and sheath folds, and in a formation of several minor strike-slip shear zones both parallel and conjugate to the main SJSZ in order to accommodate the regional transpressive stresses. Different deformation phases within the study area were dated by SIMS (zircon U-Pb), ID-TIMS (titanite U-Pb) and 40Ar/39Ar (pseudotachylyte wholerock) methods. The first deformation phase within the ca. 1.88 Ga rocks of the study area is dated at ca. 1.85 Ga, and the shear zone was reactivated twice within the ductile regime (at ca. 1.83 Ga and 1.79 Ga), during which the strain was successively increasingly partitioned into the main SJSZ and the minor shear zones. The age determinations suggest that the orogenic processes within the study area did not occur in a temporal continuum; instead, the metamorphic zircon rims and titanites show distinct, 10-20 Ma long breaks in deformation between phases of active deformation. The results of this study further imply slow cooling of the rocks through 600-700ºC so that at 1.79 Ga, 2 the temperature was still at least 600ºC. The highest recorded metamorphic pressures are 6.4-7.1 kbar. At the late stages or soon after the last ductile phase (ca. 1.79 Ga), relatively high-T mylonites and ultramylonites were formed, witnessing extreme deformation partitioning and high strain rates. After the rocks reached lower amphibolite facies to amphibolite-greenschist facies transitional conditions (ca. 500-550ºC), they cooled rapidly, probably due to crustal uplift and exhumation. The shear zone was reactivated at least once within the semi-brittle to brittle regime between ca. 1.79 Ga and 1.58 Ga, as evidenced by cataclasites and pseudotachylytes. In summary, the results of this study suggest that the Sottunga-Jurmo shear zone (and the South Finland shear zone) defines a major crustal discontinuity, and played a central role in accommodating the regional stresses during and after the Svecofennian orogeny.

ZONE INTERMÉDIAIRE – Recontruction de l’identité raciale dans L’Amant de Marguerite Duras

Tutkielman aiheena on Marguerite Durasin romaani L’Amant (suom. Rakastaja). Tarkastelen romaanin valkoihoisen nuoren tytön ”rodullisen” identiteetin rakentumista käyttäen heijastuskuvana Toista, tytön ”erirotuista” kiinalaista rakastajaa. Osittain omaelämäkerrallisen romaanin tapahtumat sijoittuvat Ranskan entiseen siirtomaahan, Indokiinaan. Kolonialismin aikainen rotusorto ja valkoisen ”rodun” mytologisen vallan rakentuminen ja konkretisoituminen ovat siis sekä tutkimukseni konteksti että tutkimuskohde. Tarkastelen missä määrin tytön rodullinen identiteetti pitää yllä – tai toisaalta rikkoo – ”rotujen” hierarkkista ajattelua. Tutkimuksen teoreettinen viitekehys on jälkikoloniaalinen (postkoloniaalinen) tutkimus, joka on monitieteellinen itsekriittinen tutkimusmetodi. Tutkimuksen tarkoituksena on kyseenalaistaa länsimaissa vallitsevia kategorioita. Päälähteinä käytetään mm. Dyerin (1997), Memmin (1994), Todorovin (1989), Girodin (2004), Hallin (1992, 1996), Derridan (1967, 1972, 1992), Shevoryn (2000), Dufourmentellen (2003) ja De Beauvoirin (1947) teoksia. Tutkimuksen keskeinen käsite on välitila, johon teoksen nuori tyttö voidaan tutkimustulosteni mukaan sijoittaa. Tyttö häilyy eräänlaisessa välitilassa valkoisen ja keltaisen ”rodun” välillä: hän tuntee kuuluvansa tavallaan molempiin ”rotuihin”, sillä hän on syntynyt Indokiinassa, puhuu paikallista kieltä ja suhtautuu paikallisiin tasavertaisemmin kuin valkoihoinen eliitti, mutta kuuluu kuitenkin syntyperältään valkoiseen ”rotuun”. Valkoisuutta ei usein määritellä ”roduksi”, vaikka muiden kuin valkoihoisten kohdalla ”rotu” määritellään joko negatiivisten tai positiivisten typologioiden mukaisesti. Tästä syystä valkoiset nähdään helposti ihmisyyden normina neutraaliksi väitetyssä valkoisten diskriminoivassa diskurssissa. L’Amant’ssa valkoisuus on näkemykseni mukaan kuitenkin näkyvää ja valkoisuuden valtaa kyseenalaistavaa. Valkoisen tytön perhe on valkoisten kolonialistien arvoasteikon alimmalla portaalla, sillä perhe on köyhä ja valkoisten valta rakentui suurelta osin siirtomaaisäntien taloudellispoliittiseen ylivaltaan. Koska tytön perheellä ei ole tarpeeksi varaa elitistiseen herruuteen, eliitti paheksuu tytön perhettä avoimesti erityisesti ”rotujen” välisen kielletyn suhteen tullessa julki, jolloin tyttö eristetään valkoisesta yhteisöstä. Kiinalainen puolestaan on miljardöörin perijä ja tämä suo hänelle hieman korkeamman aseman ”rotujen” hierarkiassa, vaikka hänen vaurautensa toisaalta uhkaakin valkoista valtaa. Myös romaanin monella tapaa konventioita rikkova seksuaalisuus on osa kielletyn suhteen välistä valtapeliä. Kirjailija strukturoi uudelleen patriarkaalisen sukupuolen rakentumisen feminisoimalla kiinalaisen miehen, sillä muussa tapauksessa hänen maskuliinisuutensa saattaisi saada ylivallan tytöstä, joka on sukupuolisesti Toinen.

Research of wood fuel market in North-West of Russia

The main purposes of this study are analyzing of forest sector of North-West and research of potentials of wood fuel market in this region. Research is focused on definition of the most perspective areas for export of wood fuel: logging residues, industrial wood processing residues, pellets and briquettes. Russian wood energy industry is very young in comparison with European countries. Nowadays there are no support and serious attention from the government to this sector. Hence almost all wood fuel market is oriented to the Western Europe. Export of wood fuel is dominated over the internal consumption. Pellet production in North –West is rapidly growing. Despite internal market has been developed the lion's share of pellets goes to export. Part of industrial wood processing residues is used by producers for their own goals, part goes to the export and rest of them is not used at all. Logging residues as raw materials for fuel have great potentials; most of them are left in a forest. Special techniques for their processing are too expensive for Russian entrepreneur. Some parts of North –West, which are situated close to the border with European countries, are potential for export. Political, economical and logistical challenges are complicated facilities for foreign customer to purchase wood fuel in remote parts of North-West. However some decisions for solving this problem exist and Russian manufactures are still interested in export of their products.

Identification of the Emerging Issues in Recycled Fiber Processing

The objectives of this research work “Identification of the Emerging Issues in Recycled Fiber processing” are discovering of emerging research issues and presenting of new approaches to identify promising research themes in recovered paper application and production. The projected approach consists of identifying technological problems often encountered in wastepaper preparation processes and also improving the quality of recovered paper and increasing its proportion in the composition of paper and board. The source of information for the problem retrieval is scientific publications in which waste paper application and production were discussed. The study has exploited several research methods to understand the changes related to utilization of recovered paper. The all assembled data was carefully studied and categorized by applying software called RefViz and CiteSpace. Suggestions were made on the various classes of these problems that need further investigation in order to propose an emerging research trends in recovered paper.

Managing the Pricing of Integrated Solutions in Export Partnerships

Little research has been conducted to guide the management of marketing variables, such as pricing, in systems business context. Furthermore, given that international partnering has become a popular mode of operation for SMEs, the objective of the current thesis was to explore the scantly researched topic of managing the pricing of integrated solutions in an export partnership. Specifically, the thesis synthesizes literature findings from the three areas of export pricing, systems business, and export partnerships. The empirical section of the study consists of a qualitative single-case study of a Finnish systems integrator that has recently launched its export operations. Primary data was collected by conducting four interviews of the case company’s managers and by organizing one group interview session. The study findings indicate that a systems integrator’s pricing strategy in an export partnership can be very multidimensional and dependant on international pricing environment and partner characteristics, that an export partnership appears to have unique implications on a systems integrator’s pricing process, and that customer value –based pricing strategies might be particularly suited to pricing integrated solutions.

Buying behavior of public organizations and its influence on export partner governance

Public organizations form a significant part of any economy, yet their buying behavior has received very little attention. Operating with complex public sector is further complicated when sales and marketing activities are done by foreign export partners. This thesis explores the buying behavior of public organizations and how partnership governance is influenced by it. The theoretical part focuses on two subjects. Firstly the strictly regulated purchase process, rigid decision making and other special characteristics of public organizations are examined. Secondly the thesis examines partnership governance forms and how coordination is arranged in the relationships. The empirical part investigates the subjects of public organization buying behavior and partnership governance using a case study of a Finnish SME and their two export partners. The findings suggest high degree of uniformity between public organizations enables the use of unilateral governance forms. By creating mutual dependence through training the possibility of adopting a purely bilateral governance form exists as well.

Customer knowledge processing in key account management

The ability of the supplier firm to generate and utilise customer-specific knowledge has attracted increasing attention in the academic literature during the last decade. It has been argued the customer knowledge should treated as a strategic asset the same as any other intangible assets. Yet, at the same time it has been shown that the management of customer-specific knowledge is challenging in practice, and that many firms are better at acquiring customer knowledge than at making use of it. This study examines customer knowledge processing in the context of key account management in large industrial firms. This focus was chosen because key accounts are demanding and complex. It is not unusual for a single key account relationship to constitute a complex web of relationships between the supplier and the key account – thus easily leading to the dispersion of customer-specific knowledge in the supplier firm. Although the importance of customer-specific knowledge generation has been widely acknowledged in the literature, surprisingly little attention has been paid to the processes through which firms generate, disseminate and use such knowledge internally for enhancing the relationships with their major, strategically important key account customers. This thesis consists of two parts. The first part comprises a theoretical overview and draws together the main findings of the study, whereas the second part consists of five complementary empirical research papers based on survey data gathered from large industrial firms in Finland. The findings suggest that the management of customer knowledge generated about and form key accounts is a three-dimensional process consisting of acquisition, dissemination and utilization. It could be concluded from the results that customer-specific knowledge is a strategic asset because the supplier’s customer knowledge processing activities have a positive effect on supplier’s key account performance. Moreover, in examining the determinants of each phase separately the study identifies a number of intra-organisational factors that facilitate the process in supplier firms. The main contribution of the thesis lies in linking the concept of customer knowledge processing to the previous literature on key account management. Moreover, given than this literature is mainly conceptual or case-based, a further contribution is to examine its consequences and determinants based on quantitative empirical data.

The Influence of Certain Processing Factors on the Durability of Yttrium Stabilized Zirconia Used As Dental Biomaterial

In dentistry, yttrium partially stabilized zirconia (ZrO2) has become one of the most attractive ceramic materials for prosthetic applications. The aim of this series of studies was to evaluate whether certain treatments used in the manufacturing process, such as sintering time, color shading or heat treatment of zirconia affect the material properties. Another aim was to evaluate the load-bearing capacity and marginal fit of manually copy-milled custom-made versus prefabricated commercially available zirconia implant abutments. Mechanical properties such as flexural strength and surface microhardness were determined for green-stage milled and sintered yttrium partially stabilized zirconia after different sintering time, coloring process and heat treatments. Scanning electron microscope (SEM) was used for analyzing the possible changes in surface structure of zirconia material after reduced sintering time, coloring and heat treatments. Possible phase change from the tetragonal to the monoclinic phase was evaluated by X-ray diffraction analysis (XRD). The load-bearing capacity of different implant abutments was measured and the fit between abutment and implant replica was examined with SEM. The results of these studies showed that the shorter sintering time or the thermocycling did not affect the strength or surface microhardness of zirconia. Coloring of zirconia decreased strength compared to un-colored control zirconia, and some of the colored zirconia specimens also showed a decrease in surface microhardness. Coloring also affected the dimensions of zirconia. Significantly decreased shrinkage was found for colored zirconia specimens during sintering. Heat treatment of zirconia did not seem to affect materials’ mechanical properties but when a thin coating of wash and glaze porcelain was fired on the tensile side of the disc the flexural strength decreased significantly. Furthermore, it was found that thermocycling increased the monoclinic phase on the surface of the zirconia. Color shading or heat treatment did not seem to affect phase transformation but small monoclinic peaks were detected on the surface of the heat treated specimens with a thin coating of wash and glaze porcelain on the opposite side. Custom-made zirconia abutments showed comparable load-bearing capacity to the prefabricated commercially available zirconia abutments. However, the fit of the custom-made abutments was less satisfactory than that of the commercially available abutments. These studies suggest that zirconia is a durable material and other treatments than color shading used in the manufacturing process of zirconia bulk material does not affect the material’s strength. The decrease in strength and dimensional changes after color shading needs to be taken into account when fabricating zirconia substructures for fixed dental prostheses. Manually copy-milled custom-made abutments have acceptable load-bearing capacity but the marginal accuracy has to be evaluated carefully.

The Sottunga-Jurmo shear zone : structure and deformation history of a crustal-scale ductile shear zone in SW Finland

The aim of this study is to gain a better understanding of the structure and the deformation history of a NW-SE trending regional, crustal-scale shear structure in the Åland archipelago, SW Finland, called the Sottunga-Jurmo shear zone (SJSZ). Approaches involving e.g. structural geology, geochronology, geochemistry and metamorphic petrology were utilised in order to reconstruct the overall deformation history of the study area. The study therefore describes several features of the shear zone including structures, kinematics and lithologies within the study area, the ages of the different deformation phases (ductile to brittle) within the shear zone, as well as some geothermobarometric results. The results indicate that the SJSZ outlines a major crustal discontinuity between the extensively migmatized rocks NE of the shear zone and the unmigmatised, amphibolite facies rocks SW of the zone. The main SJSZ shows overall dextral lateral kinematics with a SW-side up vertical component and deformation partitioning into pure shear and simple shear dominated deformation styles that was intensified toward later stages of the deformation history. The deformation partitioning resulted in complex folding and refolding against the SW margin of the SJSZ, including conical and sheath folds, and in a formation of several minor strike-slip shear zones both parallel and conjugate to the main SJSZ in order to accommodate the regional transpressive stresses. Different deformation phases within the study area were dated by SIMS (zircon U-Pb), ID-TIMS (titanite U-Pb) and 40Ar/39Ar (pseudotachylyte wholerock) methods. The first deformation phase within the ca. 1.88 Ga rocks of the study area is dated at ca. 1.85 Ga, and the shear zone was reactivated twice within the ductile regime (at ca. 1.83 Ga and 1.79 Ga), during which the strain was successively increasingly partitioned into the main SJSZ and the minor shear zones. The age determinations suggest that the orogenic processes within the study area did not occur in a temporal continuum; instead, the metamorphic zircon rims and titanites show distinct, 10-20 Ma long breaks in deformation between phases of active deformation. The results of this study further imply slow cooling of the rocks through 600-700ºC so that at 1.79 Ga, 2 the temperature was still at least 600ºC. The highest recorded metamorphic pressures are 6.4-7.1 kbar. At the late stages or soon after the last ductile phase (ca. 1.79 Ga), relatively high-T mylonites and ultramylonites were formed, witnessing extreme deformation partitioning and high strain rates. After the rocks reached lower amphibolite facies to amphibolite-greenschist facies transitional conditions (ca. 500-550ºC), they cooled rapidly, probably due to crustal uplift and exhumation. The shear zone was reactivated at least once within the semi-brittle to brittle regime between ca. 1.79 Ga and 1.58 Ga, as evidenced by cataclasites and pseudotachylytes. In summary, the results of this study suggest that the Sottunga-Jurmo shear zone (and the South Finland shear zone) defines a major crustal discontinuity, and played a central role in accommodating the regional stresses during and after the Svecofennian orogeny.

Reflexive model of research-based theatre – processing innovation at the crossroads of theatre, reflection and practice-based innovation activities

Contemporary organisations have to embrace the notion of doing ‘more with less’. This challenges knowledge production within companies and public organisations, forcing them to reorganise their structures and rethink what knowledge production actually means in the context of innovation and how knowledge is actually produced among various professional groups within the organisation in their everyday actions. Innovations are vital for organisational survival, and ‘ordinary’ employees and customers are central but too-often ignored producers of knowledge for contemporary organisations. Broader levels of participation and reflexive practices are needed. This dissertation discusses the missing links between innovation research conducted in the context of industrial management, arts, and culture; applied drama and theatre practices (specifically post-Boalian approaches); and learning – especially organising reflection – in organisational settings. This dissertation (1) explores and extends the role of research-based theatre to organising reflection and reflexive practices in the context of practice-based innovation, (2) develops a reflexive model of RBT for investigating and developing practice-based organisational process innovations in order to contribute to the development of a tool for innovation management and analysis, and (3) operationalises this model within private- and publicsector organisations. The proposed novel reflexive model of research-based theatre for investigating and developing practice-based organisational process innovations extends existing methods and offers a different way of organising reflection and reflexive practices in the context of general innovation management. The model was developed through five participatory action research processes conducted in four different organisations. The results provide learning steps – a reflection path – for understanding complex organisational life, people, and relations amid renewal and change actions. The proposed model provides a new approach to organising and cultivating reflexivity in practice-based innovation activities via research-based theatre. The results can be utilised as a guideline when processing practice-based innovation within private or public organisations. The model helps innovation managers to construct, together with their employees, temporary communities where they can learn together through reflecting on their own and each others’ experiences and to break down assumptions related to their own perspectives. The results include recommendations for practical development steps applicable in various organisations with regard to (i) application of research-based theatre and (ii) related general innovation management. The dissertation thus contributes to the development of novel learning approaches in knowledge production. Keywords: practice-based innovation, research-based theatre, learning, reflection, mode 2b knowledge production

Education export as a form of knowledge transfer : The potential of Finnish education export in Chile

Knowledge transfer is a complex process. Knowledge transfer in the form of exporting education products from one system of education to another is particularly complicated, because each system has been developed in a particular context to meet the requirements seen as relevant at each time. National innovation systems are often seen to form an essential framework within which the development of a country, its economy and level of knowledge are considered and promoted. These systems are orientated towards the future, and as such they also provide a framework for the knowledge transfer related to the development of education. In the best of circumstances they are able to facilitate and boost this transfer both from the viewpoint of the provider and the recipient. The leading thought and the idea of the study is that education export is a form of knowledge transfer, which is illustrated by the existing models included. The purpose of this study is to explore, analyze and describe the factors and phenomena related to education export, and more specifically, those related to the experiences and potential of Finnish education export to Chile. For better understanding, of the multiplicity of the issue involved, the current status of education export between Finland and Chile and he existing efforts within the Finnish innovation network will be outlined as well as new forms of co-operation between Finland and Chile in educational matters explored. Several countries have started to commercialize their education system in order to establish themselves as emerging education exporters. Moreover, the demand for education reform is accurate in many developing countries. This offers a good match between Finland and Chile to be the example countries of the research. The main research findings suggest that there are several business areas in education export. These include degrees in education, training services and education technologies for example The factors that influence education export can be divided into four groups, including academic, cultural, political and economic aspects. Challenges to overcome include the lack of product or services to be sold, lack of market and cultural knowledge of the buyer country, financing and lack of suitable pricing model. National innovation systems could be seen as enabling entities for successful education export. The extensive networks that national innovation systems aim to form, could operate as a basis for joining the forces in selling knowledge as well as receiving knowledge in a constructive way.