Machine vision methods for process measurements in pulping

The papermaking industry has been continuously developing intelligent solutions to characterize the raw materials it uses, to control the manufacturing process in a robust way, and to guarantee the desired quality of the end product. Based on the much improved imaging techniques and image-based analysis methods, it has become possible to look inside the manufacturing pipeline and propose more effective alternatives to human expertise. This study is focused on the development of image analyses methods for the pulping process of papermaking. Pulping starts with wood disintegration and forming the fiber suspension that is subsequently bleached, mixed with additives and chemicals, and finally dried and shipped to the papermaking mills. At each stage of the process it is important to analyze the properties of the raw material to guarantee the product quality. In order to evaluate properties of fibers, the main component of the pulp suspension, a framework for fiber characterization based on microscopic images is proposed in this thesis as the first contribution. The framework allows computation of fiber length and curl index correlating well with the ground truth values. The bubble detection method, the second contribution, was developed in order to estimate the gas volume at the delignification stage of the pulping process based on high-resolution in-line imaging. The gas volume was estimated accurately and the solution enabled just-in-time process termination whereas the accurate estimation of bubble size categories still remained challenging. As the third contribution of the study, optical flow computation was studied and the methods were successfully applied to pulp flow velocity estimation based on double-exposed images. Finally, a framework for classifying dirt particles in dried pulp sheets, including the semisynthetic ground truth generation, feature selection, and performance comparison of the state-of-the-art classification techniques, was proposed as the fourth contribution. The framework was successfully tested on the semisynthetic and real-world pulp sheet images. These four contributions assist in developing an integrated factory-level vision-based process control.

Microcracks and Vortices in Superconducting Thin Films

In this work, superconducting YBa₂ Cu₃O_6+x (YBCO) thin films have been studied with the experimental focus on the anisotropy of BaZrO₃ (BZO) doped YBCOthin films and the theoretical focus on modelling flux pinning by numerically solving Ginzburg- Landau equations. Also, the structural properties of undoped YBCO thin films grown on NdGaO₃ (NGO) and MgO substrates were investigated. The thin film samples were made by pulsed laser ablation on single crystal substrates. The structural properties of the thin films were characterized by X-ray diffraction and atomic force microscope measurements. The superconducting properties were investigated with a magnetometer and also with transport measurements in pulsed magnetic field up to 30 T. Flux pinning was modelled by restricting the value of the order parameter inside the columnar pinning sites and then solving the Ginzburg-Landau equations numerically with the restrictions in place. The computations were done with a parallel code on a supercomputer. The YBCO thin films were seen to develop microcracks when grown on NGO or MgO substrates. The microcrack formation was connected to the structure of the YBCO thin films in both cases. Additionally, the microcracks can be avoided by careful optimization of the deposition parameters and the film thickness. The BZO doping of the YBCO thin films was seen to decrease the effective electron mass anisotropy, which was seen by fitting the Blatter scaling to the angle dependence of the upper critical field. The Ginzburg-Landau simulations were able to reproduce the measured magnetic field dependence of the critical current density for BZO doped and undoped YBCO. The simulations showed that in addition to the large density also the large size of the BZO nanorods is a key factor behind the change in the power law behaviour between BZO doped and undoped YBCO. Additionally, the Ginzburg-Landau equations were solved for type I thin films where giant vortices were seen to appear depending on the film thickness. The simulations predicted that singly quantized vortices are stable in type I films up to quite large thicknesses and that the size of the vortices increases with decreasing film thickness, in a way that is similar to the behaviour of the interaction length of Pearl vortices.

Target audience analysis in cyber domain

This thesis aims to find an effective way of conducting a target audience analysis (TAA) in cyber domain. There are two main focal points that are addressed; the nature of the cyber domain and the method of the TAA. Of the cyber domain the object is to find the opportunities, restrictions and caveats that result from its digital and temporal nature. This is the environment in which the TAA method is examined in this study. As the TAA is an important step of any psychological operation and critical to its success, the method used must cover all the main aspects affecting the choice of a proper target audience. The first part of the research was done by sending an open-ended questionnaire to operators in the field of information warfare both in Finland and abroad. As the results were inconclusive, the research was completed by assessing the applicability of United States Army Joint Publication FM 3-05.301 in the cyber domain via a theory-based content analysis. FM 3- 05.301 was chosen because it presents a complete method of the TAA process. The findings were tested against the results of the questionnaire and new scientific research in the field of psychology. The cyber domain was found to be “fast and vast”, volatile and uncontrollable. Although governed by laws to some extent, the cyber domain is unpredictable by nature and not controllable to reasonable amount. The anonymity and lack of verification often present in the digital channels mean that anyone can have an opinion, and any message sent may change or even be counterproductive to the original purpose. The TAA method of the FM 3-05.301 is applicable in the cyber domain, although some parts of the method are outdated and thus suggested to be updated if used in that environment. The target audience categories of step two of the process were replaced by new groups that exist in the digital environment. The accessibility assessment (step eight) was also redefined, as in the digital media the mere existence of a written text is typically not enough to convey the intended message to the target audience. The scientific studies made in computer sciences and both in psychology and sociology about the behavior of people in social media (and overall in cyber domain) call for a more extensive remake of the TAA process. This falls, however, out of the scope of this work. It is thus suggested that further research should be carried out in search of computer-assisted methods and a more thorough TAA process, utilizing the latest discoveries of human behavior. ---------------------------------------------------------------------------------------------------------------------------------- Tämän opinnäytetyön tavoitteena on löytää tehokas tapa kohdeyleisöanalyysin tekemiseksi kybertoimintaympäristössä. Työssä keskitytään kahteen ilmiöön: kybertoimintaympäristön luonteeseen ja kohdeyleisöanalyysin metodiin. Kybertoimintaympäristön osalta tavoitteena on löytää sen digitaalisesta ja ajallisesta luonteesta juontuvat mahdollisuudet, rajoitteet ja sudenkuopat. Tämä on se ympäristö jossa kohdeyleisöanalyysiä tarkastellaan tässä työssä. Koska kohdeyleisöanalyysi kuuluu olennaisena osana jokaiseen psykologiseen operaatioon ja on onnistumisen kannalta kriittinen tekijä, käytettävän metodin tulee pitää sisällään kaikki oikean kohdeyleisön valinnan kannalta merkittävät osa-alueet. Tutkimuksen ensimmäisessä vaiheessa lähetettiin avoin kysely informaatiosodankäynnin ammattilaisille Suomessa ja ulkomailla. Koska kyselyn tulokset eivät olleet riittäviä johtopäätösten tekemiseksi, tutkimusta jatkettiin tarkastelemalla Yhdysvaltojen armeijan kenttäohjesäännön FM 3-05.301 soveltuvuutta kybertoimintaympäristössä käytettäväksi teorialähtöisen sisällönanalyysin avulla. FM 3-05.301 valittiin koska se sisältää kokonaisvaltaisen kohdeyleisöanalyysiprosessin. Havaintoja verrattiin kyselytutkimuksen tuloksiin ja psykologian uusiin tutkimuksiin. Kybertoimintaympäristö on tulosten perusteella nopea ja valtava, jatkuvasti muuttuva ja kontrolloimaton. Vaikkakin lait hallitsevat kybertoimintaympäristöä jossakin määrin, on se silti luonteeltaan ennakoimaton eikä sitä voida luotettavasti hallita. Digitaalisilla kanavilla usein läsnäoleva nimettömyys ja tiedon tarkastamisen mahdottomuus tarkoittavat että kenellä tahansa voi olla mielipide asioista, ja mikä tahansa viesti voi muuttua, jopa alkuperäiseen tarkoitukseen nähden vastakkaiseksi. FM 3-05.301:n metodi toimii kybertoimintaympäristössä, vaikkakin jotkin osa-alueet ovat vanhentuneita ja siksi ne esitetään päivitettäväksi mikäli metodia käytetään kyseisessä ympäristössä. Kohdan kaksi kohdeyleisökategoriat korvattiin uusilla, digitaalisessa ympäristössä esiintyvillä ryhmillä. Lähestyttävyyden arviointi (kohta 8) muotoiltiin myös uudestaan, koska digitaalisessa mediassa pelkkä tekstin läsnäolo ei sellaisenaan tyypillisesti vielä riitä halutun viestin välittämiseen kohdeyleisölle. Tietotekniikan edistyminen ja psykologian sekä sosiologian aloilla tehty tieteellinen tutkimus ihmisten käyttäytymisestä sosiaalisessa mediassa (ja yleensä kybertoimintaympäristössä) mahdollistavat koko kohdeyleisöanalyysiprosessin uudelleenrakentamisen. Tässä työssä sitä kuitenkaan ei voida tehdä. Siksi esitetäänkin että lisätutkimusta tulisi tehdä sekä tietokoneavusteisten prosessien että vielä syvällisempien kohdeyleisöanalyysien osalta, käyttäen hyväksi viimeisimpiä ihmisen käyttäytymiseen liittyviä tutkimustuloksia.

The Cycle Times of Working Capital: Financial Value Chain Analysis Method

Interest towards working capital management increased among practitioners and researchers because the financial crisis of 2008 caused the deterioration of the general financial situation. The importance of managing working capital effectively increased dramatically during the financial crisis. On one hand, companies highlighted the importance of working capital management as part of short-term financial management to overcome funding difficulties. On the other hand, in academia, it has been highlighted the need to analyze working capital management from a wider perspective namely from the value chain perspective. Previously, academic articles mostly discussed working capital management from a company-centered perspective. The objective of this thesis was to put working capital management in a wider and more academic perspective and present case studies of the value chains of industries as instrumental in theoretical contributions and practical contributions as complementary to theoretical contributions and conclusions. The principal assumption of this thesis is that selffinancing of value chains can be established through effective working capital management. Thus, the thesis introduces the financial value chain analysis method which is employed in the empirical studies. The effectiveness of working capital management of the value chains is studied through the cycle time of working capital. The financial value chain analysis method employed in this study is designed for considering value chain level phenomena. This method provides a holistic picture of the value chain through financial figures. It extends the value chain analysis to the industry level. Working capital management is studied by the cash conversion cycle that measures the length (days) of time a company has funds tied up in working capital, starting from the payment of purchases to the supplier and ending when remittance of sales is received from the customers. The working capital management practices employed in the automotive, pulp and paper and information and communication technology industries have been studied in this research project. Additionally, the Finnish pharmaceutical industry is studied to obtain a deeper understanding of the working capital management of the value chain. The results indicate that the cycle time of working capital is constant in the value chain context over time. The cash conversion cycle of automotive, pulp and paper, and ICT industries are on average 70, 60 and 40 days, respectively. The difference is mainly a consequence of the different cycle time of inventories. The financial crisis of 2008 affected the working capital management of the industries similarly. Both the cycle time of accounts receivable and accounts payable increased between 2008 and 2009. The results suggest that the companies of the automotive, pulp and paper and ICT value chains were not able to self-finance. Results do not indicate the improvement of value chains position in regard to working capital management either. The findings suggest that companies operating in the Finnish pharmaceutical industry are interested in developing their own working capital management, but collaboration with the value chain partners is not considered interesting. Competition no longer occurs between individual companies, but between value chains. Therefore the financial value chain analysis method introduced in this thesis has the potential to support value chains in improving their competitiveness.

Local Binary Patterns in Focal-Plane Processing. Analysis and Applications

Feature extraction is the part of pattern recognition, where the sensor data is transformed into a more suitable form for the machine to interpret. The purpose of this step is also to reduce the amount of information passed to the next stages of the system, and to preserve the essential information in the view of discriminating the data into different classes. For instance, in the case of image analysis the actual image intensities are vulnerable to various environmental effects, such as lighting changes and the feature extraction can be used as means for detecting features, which are invariant to certain types of illumination changes. Finally, classification tries to make decisions based on the previously transformed data. The main focus of this thesis is on developing new methods for the embedded feature extraction based on local non-parametric image descriptors. Also, feature analysis is carried out for the selected image features. Low-level Local Binary Pattern (LBP) based features are in a main role in the analysis. In the embedded domain, the pattern recognition system must usually meet strict performance constraints, such as high speed, compact size and low power consumption. The characteristics of the final system can be seen as a trade-off between these metrics, which is largely affected by the decisions made during the implementation phase. The implementation alternatives of the LBP based feature extraction are explored in the embedded domain in the context of focal-plane vision processors. In particular, the thesis demonstrates the LBP extraction with MIPA4k massively parallel focal-plane processor IC. Also higher level processing is incorporated to this framework, by means of a framework for implementing a single chip face recognition system. Furthermore, a new method for determining optical flow based on LBPs, designed in particular to the embedded domain is presented. Inspired by some of the principles observed through the feature analysis of the Local Binary Patterns, an extension to the well known non-parametric rank transform is proposed, and its performance is evaluated in face recognition experiments with a standard dataset. Finally, an a priori model where the LBPs are seen as combinations of n-tuples is also presented

Antenna feed design for omnidirectional broadband antenna

This thesis is about development broadband feed for two-mirror antenna system that match following requirements: beamwidth from 45 to 90 degrees at -3 dB level, circular polarization, absence of radiation to the lower hemisphere area. Literature review was done in the areas of the UWB antennas creation. During the work attempts were made to create a feed in a form of the quad ridged horn and "eleven" antennas. The latter is introduced as the most effective feed among all antennas discussed in thesis. Radiation patterns and other results for "eleven" antenna were obtained. Results were saved as far field sources and placed slightly below focal point into the two-mirror antenna system, because phase center of the “eleven” antenna is predominantly shifted upwards. Directivity patterns for the two-mirror system were obtained and the conclusions about the work results have been made

The effect of focal point parameters in fiber laser welding of structural steel

In this thesis the effect of focal point parameters in fiber laser welding of structural steel is studied. The goal is to establish relations between laser power, focal point diameter and focal point position with the resulting quality, weld-bead geometry and hardness of the welds. In the laboratory experiments, AB AH36 shipbuilding steel was welded in an I-butt joint configuration using IPG YLS-10000 continuous wave fiber laser. The quality of the welds produced were evaluated based on standard SFS-EN ISO 13919-1. The weld-bead geometry was defined from the weld cross-sections and Vickers hardness test was used to measure hardness's from the middle of the cross-sections. It was shown that all the studied focal point parameters have an effect on the quality, weld-bead geometry and hardness of the welds produced.

The nature and role of trust in temporary virtual problem-solving teams

The objective of this study is to increase understanding of the nature and role of trust in temporary virtual problem-solving teams engaged in real-life co-creation activities, while much of previous research has been conducted in student settings. The different forms and bases of trust, possible trust barriers and trust building actions, and perceived role of trust in knowledge sharing and collaboration are analyzed. The study is conducted as a qualitative case study in case company. Data includes interviews from 24 people: 13 from 3 different project teams that were going on during the study, 8 from already finalized project teams, and 3 founders of case company. Additional data consists of communication archives from three current teams. The results indicate that there were both knowledge-based and swift trust present, former being based on work-related personal experiences about leaders or other team members, and latter especially on references, disposition to trust and institution-based factors such as norms and rules, as well as leader and expert action. The findings suggest that possible barriers of trust might be related to lack of adaptation to virtual work, unclear roles and safety issues, and nature of virtual communication. Actions that could be applied to enhance trust are for example active behavior in discussions, work-related introductions communicating competence, managerial actions and face-to-face interaction. Finally, results also suggest that trust has a focal role as an enabler of action and knowledge sharing, and coordinator of effective collaboration and performance in temporary virtual problem-solving teams.

Coolability of porous core debris beds : Effects of bed geometry and multi-dimensional flooding

This thesis addresses the coolability of porous debris beds in the context of severe accident management of nuclear power reactors. In a hypothetical severe accident at a Nordic-type boiling water reactor, the lower drywell of the containment is flooded, for the purpose of cooling the core melt discharged from the reactor pressure vessel in a water pool. The melt is fragmented and solidified in the pool, ultimately forming a porous debris bed that generates decay heat. The properties of the bed determine the limiting value for the heat flux that can be removed from the debris to the surrounding water without the risk of re-melting. The coolability of porous debris beds has been investigated experimentally by measuring the dryout power in electrically heated test beds that have different geometries. The geometries represent the debris bed shapes that may form in an accident scenario. The focus is especially on heap-like, realistic geometries which facilitate the multi-dimensional infiltration (flooding) of coolant into the bed. Spherical and irregular particles have been used to simulate the debris. The experiments have been modeled using 2D and 3D simulation codes applicable to fluid flow and heat transfer in porous media. Based on the experimental and simulation results, an interpretation of the dryout behavior in complex debris bed geometries is presented, and the validity of the codes and models for dryout predictions is evaluated. According to the experimental and simulation results, the coolability of the debris bed depends on both the flooding mode and the height of the bed. In the experiments, it was found that multi-dimensional flooding increases the dryout heat flux and coolability in a heap-shaped debris bed by 47–58% compared to the dryout heat flux of a classical, top-flooded bed of the same height. However, heap-like beds are higher than flat, top-flooded beds, which results in the formation of larger steam flux at the top of the bed. This counteracts the effect of the multi-dimensional flooding. Based on the measured dryout heat fluxes, the maximum height of a heap-like bed can only be about 1.5 times the height of a top-flooded, cylindrical bed in order to preserve the direct benefit from the multi-dimensional flooding. In addition, studies were conducted to evaluate the hydrodynamically representative effective particle diameter, which is applied in simulation models to describe debris beds that consist of irregular particles with considerable size variation. The results suggest that the effective diameter is small, closest to the mean diameter based on the number or length of particles.

Steps towards more effective antitrust system in EU – The Damages Directive’s effect on victim’s right to compensation for antitrust harm

Kaikkien kansalaisten ja yritysten, jotka kärsivät vahinkoa Euroopan Unionin kilpailusääntöjen (SEUT 101 ja 102 artiklan) rikkomisen vuoksi, on voitava vaatia korvauksia vahingon aiheuttaneelta osapuolelta. Euroopan unionin tuomioistuin on ratkaisuillaan Courage ja Manfredi vahvistanut vahinkoa kärsineen oikeuden saada korvausta kärsimästään vahingosta. Suomessa kilpailuoikeudellista vahingonkorvausta koskeva oikeuskäytäntö on ollut vähäistä, vaikkakin viime aikoina on annettu muutama merkittävä vahingonkorvausratkaisu, näistä kenties tunnetuimpana asvalttikartelliratkaisu. Kilpailuoikeuden rikkomisesta vahinkoa kärsineet saavat kuitenkin vain harvoin korvausta kärsimästään vahingosta, mikä on ollut seurausta erilaisista lainsäädännöllisistä ja menettelyistä johtuvista esteistä jäsenvaltioiden säännöissä. Komission pitkään kestänyt lainsäädäntöhanke EU:n kilpailuoikeuden täytäntöönpanojärjestelmän selkeyttämiseksi päättyi marraskuussa 2014, kun Euroopan parlamentin ja neuvoston direktiivi tietyistä säännöistä, joita sovelletaan jäsenvaltioiden ja Euroopan unionin kilpailuoikeuden rikkomisen johdosta kansallisen lainsäädännön nojalla nostettuihin vahingonkorvauskanteisiin (2014/104/ EU) hyväksyttiin. Direktiivi julkaistiin Euroopan unionin virallisessa lehdessä 5. joulukuuta 2014, ja jäsenvaltioilla on 27.12.2016 asti aikaa implementoida direktiivi osaksi kansallista lainsäädäntöä. Direktiivin tavoitteena on EU:n kilpailusääntöjen tehokas täytäntöönpano sekä kilpailuoikeuden julkisoikeudellisen ja yksityisoikeudellisen täytäntöönpanon selkeyttäminen. Lisäksi direktiivi pyrkii varmistamaan, että vahingonkärsijät voivat saada täyden korvauksen kärsimästään vahingosta, sekä poistamaan esteitä ja pienentämään kustannuksia vahingon todistamisessa, samalla harmonisoiden eri jäsenmaissa toimivien yritysten oikeussuojan tasoa. Tarkastelen pro gradu –tutkielmassani kilpailuoikeudellisen vahingonkorvauksen kehitystä sekä uuden EU:n vahingonkorvausdirektiivin vaikutuksia erityisesti vahingonkärsijän näkökulmasta, eli sitä kuinka direktiivi vaikuttaa vahingonkärsijän mahdollisuuteen saada korvausta kärsimästään vahingosta, joka johtuu EU:n kilpailusääntöjen rikkomisesta. Lisäksi tarkastelen lyhyesti direktiivin tuomia muutoksia Suomen lainsäädäntöön. Tutkielmani loppupäätelmä on, että vaikka vahingonkorvausdirektiivi ei täydellisesti paranna vahingonkärsijän asemaa, se selkeyttää monella tavalla kilpailuoikeudellisten vahingonkorvauskanteiden nykyistä tilaa, ja saattaa tietyssä määrin rohkaista vahingonkärsijiä hakemaan korvausta kärsimästään vahingosta.

Targeting oncogenic signaling proteins : new insights using a FRET-based chemical biology approach

Cancer affects more than 20 million people each year and this rate is increasing globally. The Ras/MAPK-pathway is one of the best-studied cancer signaling pathways. Ras proteins are mutated in almost 20% of all human cancers and despite numerous efforts, no effective therapy that specifically targets Ras is available to date. It is now well established that Ras proteins laterally segregate on the plasma membrane into transient nanoscale signaling complexes called nanoclusters. These Ras nanoclusters are essential for the high-fidelity signal transmission. Disruption of nanoclustering leads to reduction in Ras activity and signaling, therefore targeting nanoclusters opens up important new therapeutic possibilities in cancer. This work describes three different studies exploring the idea of membrane protein nanoclusters as novel anti-cancer drug targets. It is focused on the design and implementation of a simple, cell-based Förster Resonance Energy Transfer (FRET)-biosensor screening platform to identify compounds that affect Ras membrane organization and nanoclustering. Chemical libraries from different sources were tested and a number of potential hit molecules were validated on full-length oncogenic proteins using a combination of imaging, biochemical and transformation assays. In the first study, a small chemical library was screened using H-ras derived FRET-biosensors. Surprisingly from this screen, commonly used protein synthesis inhibitors (PSIs) were found to specifically increase H-ras nanoclustering and downstream signalling in a H-ras dependent manner. Using a representative PSI, increase in H-ras activity was shown to induce cancer stem cell (CSC)-enriched mammosphere formation and tumor growth of breast cancer cells. Moreover, PSIs do not increase K-ras nanoclustering, making this screening approach suitable for identifying Ras isoform-specific inhibitors. In the second study, a nanoncluster-directed screen using both H- and K-ras derived FRET biosensors identified CSC inhibitor salinomycin to specifically inhibit K-ras nanocluster organization and downstream signaling. A K-ras nanoclusteringassociated gene signature was established that predicts the drug sensitivity of cancer cells to CSC inhibitors. Interestingly, almost 8% of patient tumor samples in the The Cancer Genome Atlas (TCGA) database had the above gene signature and were associated with a significantly higher mortality. From this mechanistic insight, an additional microbial metabolite screen on H- and K-ras biosensors identified ophiobolin A and conglobatin A to specifically affect K-ras nanoclustering and to act as potential breast CSC inhibitors. In the third study, the Ras FRET-biosensor principle was used to investigate membrane anchorage and nanoclustering of myristoylated proteins such as heterotrimeric G-proteins, Yes- and Src-kinases. Furthermore, Yes-biosensor was validated to be a suitable platform for performing chemical and genetic screens to identify myristoylation inhibitors. The results of this thesis demonstrate the potential of the Ras-derived FRETbiosensor platform to differentiate and identify Ras-isoform specfic inhibitors. The results also highlight that most of the inhibitors identified predominantly perturb Ras subcellular distribution and membrane organization through some novel and yet unknown mechanisms. The results give new insights into the role of Ras nanoclusters as promising new molecular targets in cancer and in stem cells.