Tilauspisteen ja tilauseräkoon määrittäminen osana ostoprosessin kehittämistä tukkukaupassa

Varastojen hallinta sisältää yksinkertaisimmillaan varastotasojen, tilauspisteiden ja tilauseräkokojen määrittämiseen liittyviä päätöksiä ja toimenpiteitä. Perinteisesti näitä päätöksiä on tarkasteltu ainoastaan yhden ohjauspisteen sisäisestä näkökulmasta. Ostoprosessin ja siihen liittyvien toimittajasuhteiden kehittämisen merkitystä varastojen hallinnassa ei ole sen sijaan täysin ymmärretty. Tässä työssä tarkastellaan sekä perinteisiä varastonohjausjärjestelmiä että ostoprosessin kehittämistä teoreettisen viitekehyksen ja empiirisen case-tutkimuksen kautta. Tutkimuksen päätarkoitus on esittää varastonimikkeiden tilausajankohdan ja –eräkoon määrittämiseen liittyviä menetelmiä. Tutkimuksen teoriaosassa muodostetaan viitekehys tuotteiden luokitteluun perustuville varastojen hallinnan menettelytavoille. Varastojen hallinnan päätöksiin vaikuttavia tekijöitä ovat mm. ostoprosessin vaiheiden operatiivinen kehittäminen, toimittajayhteistyön parantaminen toimitusketjun hallinnan ja partnership-suhteiden kautta sekä nimikkeiden kysynnän, toimitusaikojen, varastojen hallinnan kustannusten ja mittarien määrittäminen. Lisäksi kuvataan tukkukauppaan liittyviä erityispiirteitä em. seikkojen osalta. Empiirisessä osassa tarkastellaan ensin terästuotteiden tukkukaupan Oy Kontino Ab:n ostotoiminnan ja varastojen hallinnan nykytilaa. Haastatteluaineiston perusteella esitetään optimaalisia varastotäydennysmenetelmiä luokitelluille nimikkeille. Tutkimuksen mukaan varaston palvelukyvyn mittaaminen on välttämätöntä optimaalisen tilauspisteen ja –eräkoon määrittämisessä. Tukkukaupan varastojen hallintaan soveltuu parhaiten kiinteän tilausvälin järjestelmä, jossa tilaushetki on kiinteä ja eräkoko sekä tilauspiste vaihtelevat. Tutkimuksesta voidaan päätellä, että myös tukkukaupan on pyrittävä varastotasojen alentamiseen parantaakseen varastoinnin tehokkuutta ja palvelukykyä. Parannukset voidaan toteuttaa vain ymmärtämällä varastojen hallinnan ja ostoprosessin välinen läheinen yhteys ja kehittämällä strategista toimittajayhteistyötä.

Roolit, vuorovaikutus ja päätöksenteko johtoryhmätyöskentelyssä, case Imatra Steel Imatran terästehdas

Tutkimus on luonteeltaan laadullinen ja sen tavoitteena on tarkastella johtoryhmätyöskentelyä ja päätöksentekoa roolien ja vuorovaikutuksen kautta. Roolit perustuvat havainnointitutkimukselle Imatra Steelin Imatran terästehtaan johtoryhmässä. Tutkimuksessa on lisäksi hyödynnetty teemahaastatteluja ja yrityksen dokumentteja, ja näin ollen aineistotriangulaatiota. Tutkimuksen painotus on empiirisellä osalla. Tutkimuksen avulla todetaan, että johtoryhmätyöskentely kohdeyrityksessä on perinteitä noudattelevaa ja keskittynyt informaation jakamiseen sekä toiminnan koordinointiin. Strateginen päätöksenteko ja dynaaminen johtoryhmätyöskentely ovat vähemmän painottuneita. Päätökset johtoryhmän kokouksissa syntyvät keskustelujen tuloksena puheenjohtajan tehdessä lopullisen ratkaisun.

Lujien terästen hitsauksen kehittäminen

Työn teoriaosuudessa käsitellään lujia hitsattavia teräksiä sekä niiden hitsauksessa huomioitavia erityispiirteitä. Työssä esitellään hitsattavuuden arviointiin kehitettyjä teoreettisia menetelmiä sekä otetaan kantaa hitsauksen suoritustekniikkaan ja lisäainevalintaan. Myös lujien terästen hitsauksessa tyypilliset hitsausvirheet on käsitelty tässä työssä. Työn kokeellisessa osassa selvitettiin metsäteknologian tuotteita valmistavan metalliyrityksen käyttämien lujien terästen hitsattavuus ja hitsauksen esivalmistelujen tarpeellisuus. Kokeelliseen osioon kuului myös sopivan lisäainelangan valinta sekä tarkempaan tarkasteluun valitun esimerkkituotteen hitsien laadun selvittäminen. Tutkimuksissa käytettyjä menetelmiä olivat makro- ja mikrohietutkimus, hitsausliitoksen poikittainen vetokoe, Vickersin kovuuskoe ja murtokoe. Tarkasteluissa peilautuu myös hitsauksen automatisoinnin vaikutukset lujien terästen hitsaukseen. Kokeellisessa osiossa huomattiin nuorrutettujen terästen pehmeneminen liian suurella lämmöntuonnilla. Termomekaanisesti valssatut teräkset ovat paremmin hitsattavissa kuin nuorrutetut ja karkaistut teräkset. Kyseessä olevassa yrityksessä hitsattavien materiaalien paksuudet ovat pääsääntöisesti niin ohuita, ettei korotettua työlämpötilaa tarvita. Alilujat lisäaineet soveltuvat hitsauslisäaineeksi tuotantokäyttöön muutamia tuotekohtaisia poikkeuksia lukuun ottamatta.

Determining risk potential through accidents and near-accidents: an empirical study in a steel factory

Fatal and permanently disabling accidents form only one per I cent of all occupational accidents but in many branches of industry they account for more than half the accident costs. Furthermore the human suffering of the victim and his family is greater in severe accidents than in slight ones. For both human and economic reasons the severe accident risks should be identified befor injuries occur. It is for this purpose that different safety analysis methods have been developed . This study shows two new possible approaches to the problem.. The first is the hypothesis that it is possible to estimate the potential severity of accidents independent of the actual severity. The second is the hypothesis that when workers are also asked to report near accidents, they are particularly prone to report potentially severe near accidents on the basis of their own subjective risk assessment. A field study was carried out in a steel factory. The results supported both the hypotheses. The reliability and the validity of post incident estimates of an accident's potential severity were reasonable. About 10 % of accidents were estimated to be potentially critical; they could have led to death or very severe permanent disability. Reported near accidents were significantly more severe, about 60 $ of them were estimated to be critical. Furthermore the validity of workers subjective risk assessment, manifested in the near accident reports, proved to be reasonable. The studied new methods require further development and testing. They could be used both in routine usage in work places and in research for identifying and setting the priorities of accident risks.

Kaukojäähdytysverkon rakennevaihtoehdot

Kaukojäähdytyksellä tarkoitetaan keskitetysti tuotetun jäähdytysenergian jakamista kiinteistöihin jakeluverkossa kiertävän kylmän veden välityksellä, eli kaukojäähdytys on ulkoistettu jäähdytysratkaisu. Jäähdytysenergiaa tarvitaan työtehon, viihtyisyyden ja sisäilman laadun parantamiseksi, sekä joidenkin prosessien tarpeisiin. Siinä missä perinteinen kiinteistökohtainen jäähdytysjärjestelmä tuottaa jäähdytysenergian sähköllä, käytetään kaukojäähdytyksessä jäähdytysenergian tuottamiseen sellaisia resursseja, jotka muuten jäisivät käyttämättä. Tästä syystä kaukojäähdytys vähentää merkittävästi hiilidioksidipäästöjä, jonka lisäksi kaukojäähdytys vähentää kylmäkoneissa käytettävien kylmäaineiden aiheuttamia kasvihuonekaasupäästöjä. Kaukolämpöverkkoa muistuttavan kaukojäähdytysverkon rakentaminen vaatii suuria investointeja. Nykyisin jakeluverkon rakenteena käytetään 2Mpuk- rakennetta, jonka todettiin olevan teknistaloudellisesti soveltuvin vaihtoehto Helsingin Energian kaukojäähdytysverkkoon. Myös PE 100 putkia voitaisiin käyttää PN 16 paineluokassa alle DN 300 kokoluokkaa vastaavissa johdoissa, ja PN 10 paineluokassa alle DN 400 johdoissa. Kaukolämpöverkon paineluokan valinta vaikuttaa oleellisesti investointikustannuksiin PE- putkilla ja joillekin alueille kannattanee rakentaa alemman paineluokan omaava erillisverkko PE- putkista. Happidiffuusion kautta PE- putkista pääsee jonkin verran happea verkkoon, mutta määrät ovat melko pieniä, eikä muitakaan teknisiä esteitä hyvin korroosiota kestävien PE- putkien käytölle ole. 2Mpuk- rakenteelle suurimman riskin aiheuttaa elementtien liitoskohdista teräsputken pinnalle pääsevä ulkopuolinen vesi. Koska kaukojäähdytysjohdot ovat lisäksi yleensä ympäristöä kylmempiä, kondensoivat ne vettä pinnallensa kaukolämpöjohdoista poiketen. Ulkopuolisen veden aiheuttamaa riskiä voitaisiin pienentää eristämällä liitoskohdat sähkömuhveilla. Verkoston rakentamiskustannuksia ja liikenteelle aiheutuvia haittoja voidaan vähentää ojattomia rakentamismenetelmiä, kuten suuntaporausta käyttämällä.

Commodity Price Driven Risk Management from Viewpoint of High Grade Steel Alloys

The study of price risk management concerning high grade steel alloys and their components was conducted. This study was focused in metal commodities, of which nickel, chrome and molybdenum were in a central role. Also possible hedging instruments and strategies for referred metals were studied. In the literature part main themes are price formation of Ni, Cr and Mo, the functioning of metal exchanges and main hedging instruments for metal commodities. This section also covers how micro and macro variables may affect metal prices from the viewpoint of short as well as longer time period. The experimental part consists of three sections. In the first part, multiple regression model with seven explanatory variables was constructed to describe price behavior of nickel. Results were compared after this with information created with comparable simple regression model. Additionally, long time mean price reversion of nickel was studied. In the second part, theoretical price of CF8M alloy was studied by using nickel, ferro-chrome and ferro-molybdenum as explanatory variables. In the last section, cross hedging possibilities for illiquid FeCr -metal was studied with five LME futures. Also this section covers new information concerning possible forthcoming molybdenum future contracts as well. The results of this study confirm, that linear regression models which are based on the assumption of market rationality, are not able to reliably describe price development of metals at issue. Models fulfilling assumptions for linear regression may though include useful information of statistical significant variables which have effect on metal prices. According to the experimental part, short futures were found to incorporate the most accurate information concerning the price movements in the future. However, not even 3M futures were able to predict turning point in the market before the faced slump. Cross hedging seemed to be very doubtful risk management strategy for illiquid metals, because correlations coefficients were found to be very sensitive for the chosen time span.

Calculation of the critical crack size for cold form rectangular hollow section tube (CRHS) under bending load at -40º C temperature

To predict the capacity of the structure or the point which is followed by instability, calculation of the critical crack size is important. Structures usually contain several cracks but not necessarily all of these cracks lead to failure or reach the critical size. So, defining the harmful cracks or the crack size which is the most leading one to failure provides criteria for structure’s capacity at elevated temperature. The scope of this thesis was to calculate fracture parameters like stress intensity factor, the J integral and plastic and ultimate capacity of the structure to estimate critical crack size for this specific structure. Several three dimensional (3D) simulations using finite element method by Ansys program and boundary element method by Frank 3D program were carried out to calculate fracture parameters and results with the aid of laboratory tests (loaddisplacement curve, the J resistance curve and yield or ultimate stress) leaded to extract critical size of the crack. Two types of the fracture which is usually affected by temperature, Elastic and Elasti-Plastic fractures were simulated by performing several linear elastic and nonlinear elastic analyses. Geometry details of the weldment; flank angle and toe radius were also studied independently to estimate the location of crack initiation and simulate stress field in early stages of crack extension in structure. In this work also overview of the structure’s capacity in room temperature (20 ºC) was studied. Comparison of the results in different temperature (20 ºC and -40 ºC) provides a threshold of the structure’s behavior within the defined range.

Engendering Group Support Based Foresight for Capital Intensive Manufacturing Industries - Case Paper and Steel Industry Scenarios by 2018

In recent times of global turmoil, the need for uncertainty management has become ever momentous. The need for enhanced foresight especially concerns capital-intensive industries, which need to commit their resources and assets with long-term planning horizons. Scenario planning has been acknowledged to have many virtues - and limitations - concerning the mapping of the future and illustrating the alternative development paths. The present study has been initiated to address both the need of improved foresight in two capital-intensive industries, i.e. the paper and steel industries and the imperfections in the current scenario practice. The research problem has been approached by engendering a problem-solving vehicle, which combines, e.g. elements of generic scenario process, face-to-face group support methods, deductive scenario reasoning and causal mapping into a fully integrated scenario process. The process, called the SAGES scenario framework, has been empirically tested by creating alternative futures for two capital-intensive industries, i.e. the paper and steel industries. Three scenarios for each industry have been engendered together with the identification of the key megatrends, the most important foreign investment determinants, key future drivers and leading indicators for the materialisation of the scenarios. The empirical results revealed a two-fold outlook for the paper industry, while the steel industry future was seen as much more positive. The research found support for utilising group support systems in scenario and strategic planning context with some limitations. Key perceived benefits include high time-efficiency, productivity and lower resource-intensiveness. Group support also seems to enhance participant satisfaction, encourage innovative thinking and provide the users with personalised qualitative scenarios.

Conversioni al cattolicesimo a Roma tra Sei e Settecento. La presenza degli scandinavi nell’Ospizio dei Convertendi.

In my PhD dissertation, I have examined a group of people of Scandinavian origin received by Ospizio dei Convertendi. This group has been hitherto largely unknown to historical research. The Ospizio was an institute founded by the Oratorian Congregation in Rome in 1673 to provide religious instruction and material aid to both recent and aspirant converts to Roman Catholicism. My research traces the profile of converts and a typology of motives, examining different factors which influenced the conversion process. I show that the key factors were often of a social rather than a religious nature. Moreover, I have analyzed the hospice in the context of Counter-Reformation charity as well. In terms of numbers, the Scandinavians formed a somewhat marginal yet not insignificant group within the Roman hospice. Out of a total of 2203 guests received between 1673 and 1706, 4.6 % were Scandinavians: 74 Swedes (including Finland and Livonia) and 27 Danes (including Norway). They came from a rigorously Protestant region which reacted to Catholicism with severe legislative measures. Converts to Catholicism risked confiscation of their goods, expulsion or even capital punishment. Since both Sweden and Denmark were practically impenetrable to Catholicism at the time and clandestine missionary attempts often failed before they had even properly started, the Roman Catholic Church shifted its interest towards Northerners arriving in Rome, a preferred destination for young noblemen, artists and migrant craftsmen. The material related to Ospizio dei Convertendi, conserved in the Vatican archives, is a scarcely known yet unusually rich source, not only for the religious history of our continent, but also for social history and the study of migration in early modern Europe. It contains a wealth of information about members of the subordinate classes, of their travels and lives in Europe. The profile delineated in these documents is of individuals who had a wide range of different professions and different aspirations. These documents encompass a vast social spectrum that was highly mobile on a continent which by that time had become pluriconfessional. Therefore, these migrants faced the complex religious reality in their everyday life. The principal corpus of my research consists of two types of manuscript sources created for administrative and in a way also for apologetic purposes of the Roman Catholic Church. My starting point is the Primo registro generale of Ospizio dei Convertendi. This is a volume in which the following information about each guest was registered: name, nationality, city of origin, age, sex, profession, confession professed before converting, date of arrival, departure, abjuration and baptism. Typically, the convert was male, originating from Stockholm or Copenhagen, from 21 to 30 years of age. The biggest occupational groups in descending order were soldiers, noblemen, craftsmen and sailors. Thus the data reflects a multiform reality of interurban and long distance migration, ideals regarding the education of young noblemen and gentry as well as the need of European armies to hire foreign mercenaries in their various campaigns. Against this background the almost total absence of women is hardly surprising: there is only one woman in the material I have studied. The second main source, Nota degl’ospiti ricevuti e spese fatte per essi, sheds more light on the choices of the converts, their motivations and their lives outside Scandinavia before reaching Rome. This narrative material permits an analysis which completes but also goes far beyond the columns of the Institute’s general register. This material consists of reports written by Catholic priests based on an interview conducted upon each guest’s arrival. The material frequently includes information on what the converts would do following their departure from the Institute as well. These sources have a specific narrative form and contain short biographies, list reasons for converting and information about the journey from the North to the Mediterranean - a journey which in many cases took several years. Moreover, they show that certain unorthodox practices such as calling on the saints and pleading for help from them were not uncommon in the Protestant popular religion. The recording of information on conversions from Protestantism to Catholicism reflects both religious and social interest on the part of the receiving institute. The information obtained was used for the purposes of religious teaching, for finding adequate ways of inserting the convert into Italian society so that he could earn a living, and to find effective methods to convert others with a similar cultural and geographical background. The stories recorded were based on interviews with the newly-arrived, information obtained from a travel companion or fellow countrymen, or from written documents the aspirant converts carried with them. These sources illustrate, although sometimes in rather simplified ways, the circumstances and motivations which were relevant to the choice of changing one’s confession. In addition, I have examined petitions addressed to the hospice and other Roman authorities in order to get financial aid. These petitions were written by Italian scrittori, and they contain certain conventions and topoi of presenting the conversion with the purpose of improving the chances of obtaining financial aid. It is through these filters, which may seem initially almost invisible, that the remote voice of the converts reaches us. The results of the analysis are particularly interesting because they disagree with some of the principal conclusions of previous work on the subject. First, earlier research has focused almost exclusively on the conversions of noblemen, and has argued, second, that the Queen Christina of Sweden was the driving force behind their change of confession. The sources examined for this dissertation present a profile of long-distance migrants, many of them members of the subordinate classes, who were looking for ways to make their living in Europe. These people had in many cases left their country of origin several years earlier and not for religious reasons, so, crucially, we are not dealing with confessional migration in these cases. Rather, conversion was a complex process, intricately tied up with strategies of survival, integration and upward social mobility. At the same time, while these components are significant on their own right, they do not necessarily point to the absence of motivations of a more clearly religious nature.

Voimalaitoksen palamisilman esilämmittimen sisäpuolisen korroosion hallinta pinta-aktiivisten amiinien avulla

Useat voimalaitokset käyttävät hiiliteräksistä valmistettuja palamisilman esilämmittimiä, joissa höyrykattilan palamisilmaa lämmitetään matalapainehöyryllä. Joissakin tapauksissa esilämmittimet ovat kärsineet sisäpuolisen korroosion aiheuttamista putkirikoista. Tämän työn tavoitteena oli selvittää korroosiovaurioiden aiheuttajat ja tarkastella eri keinoja uusien korroosiovaurioiden ehkäisemiseksi. Keskeisimpänä uusien vaurioiden ehkäisykeinona tarkastellaan pinta-aktiivisia amiineja sisältäviä höyrykattilan jälkiannostelukemikaaliseoksia, joista tarkemman tarkastelun kohteena on kaupallinen Helamin 90 H Turb- kemikaaliseos. Pääasialliseksi korroosion aiheuttajaksi on usein epäilty höyryn sisältämää hiilidioksidia. Uusimpien näkemysten mukaan orgaaniset hapot, pääasiassa etikka- ja muurahaishappo ovat kuitenkin hiilidioksidia voimakkaampia korroosion aiheuttajia ilmanesilämmittimissä. Orgaaniset hapot väkevöityvät höyryn lauhtumisen alkaessa muodostuviin lauhdepisaroihin ja alentavat pH-tasoa radikaalisti. pH-tason aleneminen nopeuttaa metallipintoja suojaavan magnetiitin liukenemista ja vaikeuttaa myös sen uusiutumista. Orgaanisia happoja ja hiilidioksidia muodostuu orgaanisten aineiden osittaisessa hajoamisessa höyrykattilan vesi-höyrypiirissä. Pääasialliset orgaanisten aineiden lähteet ovat lisäveden mukana kattilaan kulkeutuva luonnon orgaaninen aines ja käytetyt orgaaniset jälkiannostelukemikaalit. Orgaanisten aineiden kuormaa voidaan pienentää parantamalla lisäveden valmistusprosessin orgaanisten aineiden erotustehokkuutta esimerkiksi käänteisosmoosilla. Mikäli lisäveden laadun parantaminen ei ole järkevästi toteutettavissa, voidaan orgaanisten jälkiannostelukemikaalien oikeanlaisella käytöllä neutraloida orgaanisten happojen vaikutus ilmanesilämmittimissä. Tehokkaimmaksi korroosion hillitsijäksi suoritettujen mittausten perusteella osoittautuivat kemikaaliseokset, jotka sisältävät alkaloivien amiinien lisäksi kalvoa muodostavaa pinta-aktiivista amiinia.

Genesis and Emplacement of Carbonatites and Lamprophyres in the Svecofennian Domain

A small carbonatite dyke swarm has been identified at Naantali, southwest Finland. Several swarms of shoshonitic lamprophyres are also known along the Archean-Proterozoic boundary in eastern Finland and northwest Russia. These intrusions, along with the carbonatite intrusion at Halpanen, eastern Finland, represent a stage of widespread low-volume mantle-sourced alkaline magmatism in the Svecofennian Domain. Using trace element and isotope geochemistry coupled with precise geochronology from these rocks, a model is presented for the Proterozoic metasomatic evolution of the Fennoscandian subcontinental lithospheric mantle. At ~2.2-2.06 Ga, increased biological production in shallow seas linked to continental rifting, resulted in increased burial rates of organic carbon. Subduction between ~1.93-1.88 Ga returned organic carbon-enriched sediments of mixed Archean and Proterozoic provenance to the mantle. Dehydration reactions supplied water to the mantle wedge, driving arc volcanism, while mica, amphibole and carbonate were brought deeper into the mantle with the subducting slab. The cold subducted slab was heated conductively from the surrounding warm mantle, while pressures continued to gradually increase as a result of crustal thickening. The sediments began to melt in a two stage process, first producing a hydrous alkaline silicate melt, which infiltrated the mantle wedge and crystallised as metasomatic veins. At higher temperatures, carbonatite melt was produced, which preferentially infiltrated the pre-existing metasomatic vein network. At the onset of post-collisional extension, deep fault structures formed, providing conduits for mantle melts to reach the upper crust. Low-volume partial melting of the enriched mantle at depths of at least 110 km led to the formation of first carbonatitic magma and subsequently lamprophyric magma. Carbonatite was emplaced in the upper crust at Naantali at 1795.7 ± 6.8 Ma; lamprophyres along the Archean-Proterozoic boundary were emplaced between 1790.1 ± 3.3 Ma and 1781 ± 20 Ma.

Performance of high power fibre laser cutting of thick-section steel and mediumsection aluminium

Cutting of thick section stainless steel and mild steel, and medium section aluminium using the high power ytterbium fibre laser has been experimentally investigated in this study. Theoretical models of the laser power requirement for cutting of a metal workpiece and the melt removal rate were also developed. The calculated laser power requirement was correlated to the laser power used for the cutting of 10 mm stainless steel workpiece and 15 mm mild steel workpiece using the ytterbium fibre laser and the CO2 laser. Nitrogen assist gas was used for cutting of stainless steel and oxygen was used for mild steel cutting. It was found that the incident laser power required for cutting at a given cutting speed was lower for fibre laser cutting than for CO2 laser cutting indicating a higher absorptivity of the fibre laser beam by the workpiece and higher melting efficiency for the fibre laser beam than for the CO2 laser beam. The difficulty in achieving an efficient melt removal during high speed cutting of the 15 mmmild steel workpiece with oxygen assist gas using the ytterbium fibre laser can be attributed to the high melting efficiency of the ytterbium fibre laser. The calculated melt flow velocity and melt film thickness correlated well with the location of the boundary layer separation point on the 10 mm stainless steel cut edges. An increase in the melt film thickness caused by deceleration of the melt particles in the boundary layer by the viscous shear forces results in the flow separation. The melt flow velocity increases with an increase in assist gas pressure and cut kerf width resulting in a reduction in the melt film thickness and the boundary layer separation point moves closer to the bottom cut edge. The cut edge quality was examined by visual inspection of the cut samples and measurement of the cut kerf width, boundary layer separation point, cut edge squareness (perpendicularity) deviation, and cut edge surface roughness as output quality factors. Different regions of cut edge quality in 10 mm stainless steel and 4 mm aluminium workpieces were defined for different combinations of cutting speed and laserpower.Optimization of processing parameters for a high cut edge quality in 10 mmstainless steel was demonstrated

Product costing model for laser welded hollow core steel panels

The aim of the study was to create an easily upgradable product costing model for laser welded hollow core steel panels to help in pricing decisions. The theory section includes a literature review to identify traditional and modern cost accounting methodologies, which are used by manufacturing companies. The theory section also presents the basics of steel panel structures and their manufacturing methods and manufacturing costs based on previous research. Activity-Based costing turned out to be the most appropriate methodology for the costing model because of wide product variations. Activity analysis and the determination of cost drivers based on observations and interviews were the key steps in the creation of the model. The created model was used to test how panel parameters affect the costs caused by the main manufacturing stages and materials. By comparing cost structures, it was possible to find the panel types that are the most economic and uneconomic to manufacture. A sensitivity analysis proved that the model gives sufficiently reliable cost information to support pricing decisions. More reliable cost information could be achieved by determining the cost drivers more accurately. Alternative methods for manufacturing the cores were compared with the model. The comparison proved that roll forming can be more advantageous and flexible than press brake bending. However, more extensive research showed that roll forming is possible only when the cores are designed to be manufactured by roll forming. Due to that fact, when new panels are designed consideration should be given to the possibility of using roll forming.

Magnetic Resonance Experiments with Atomic Hydrogen

In this thesis three experiments with atomic hydrogen (H) at low temperatures T<1 K are presented. Experiments were carried out with two- (2D) and three-dimensional (3D) H gas, and with H atoms trapped in solid H2 matrix. The main focus of this work is on interatomic interactions, which have certain specific features in these three systems considered. A common feature is the very high density of atomic hydrogen, the systems are close to quantum degeneracy. Short range interactions in collisions between atoms are important in gaseous H. The system of H in H₂ differ dramatically because atoms remain fixed in the H₂ lattice and properties are governed by long-range interactions with the solid matrix and with H atoms. The main tools in our studies were the methods of magnetic resonance, with electron spin resonance (ESR) at 128 GHz being used as the principal detection method. For the first time in experiments with H in high magnetic fields and at low temperatures we combined ESR and NMR to perform electron-nuclear double resonance (ENDOR) as well as coherent two-photon spectroscopy. This allowed to distinguish between different types of interactions in the magnetic resonance spectra. Experiments with 2D H gas utilized the thermal compression method in homogeneous magnetic field, developed in our laboratory. In this work methods were developed for direct studies of 3D H at high density, and for creating high density samples of H in H₂. We measured magnetic resonance line shifts due to collisions in the 2D and 3D H gases. First we observed that the cold collision shift in 2D H gas composed of atoms in a single hyperfine state is much smaller than predicted by the mean-field theory. This motivated us to carry out similar experiments with 3D H. In 3D H the cold collision shift was found to be an order of magnitude smaller for atoms in a single hyperfine state than that for a mixture of atoms in two different hyperfine states. The collisional shifts were found to be in fair agreement with the theory, which takes into account symmetrization of the wave functions of the colliding atoms. The origin of the small shift in the 2D H composed of single hyperfine state atoms is not yet understood. The measurement of the shift in 3D H provides experimental determination for the difference of the scattering lengths of ground state atoms. The experiment with H atoms captured in H2 matrix at temperatures below 1 K originated from our work with H gas. We found out that samples of H in H2 were formed during recombination of gas phase H, enabling sample preparation at temperatures below 0.5 K. Alternatively, we created the samples by electron impact dissociation of H₂ molecules in situ in the solid. By the latter method we reached highest densities of H atoms reported so far, 3.5(5)x10¹⁹ cm^-3. The H atoms were found to be stable for weeks at temperatures below 0.5 K. The observation of dipolar interaction effects provides a verification for the density measurement. Our results point to two different sites for H atoms in H2 lattice. The steady-state nuclear polarizations of the atoms were found to be non-thermal. The possibility for further increase of the impurity H density is considered. At higher densities and lower temperatures it might be possible to observe phenomena related to quantum degeneracy in solid.