Identification of extractives and polysaccharides as foulants in membrane filtration of pulp and paper mill effluents

The search for new renewable materials has intensified in recent years. Pulp and paper mill process streams contain a number of potential compounds which could be used in biofuel production and as raw materials in the chemical, food and pharmaceutical industries. Prior to utilization, these compounds require separation from other compounds present in the process stream. One feasible separation technique is membrane filtration but to some extent, fouling still limits its implementation in pulp and paper mill applications. To mitigate fouling and its effects, foulants and their fouling mechanisms need to be well understood. This thesis evaluates fouling in filtration of pulp and paper mill process streams by means of polysaccharide model substance filtrations and by development of a procedure to analyze and identify potential foulants, i.e. wood extractives and carbohydrates, from fouled membranes. The model solution filtration results demonstrate that each polysaccharide has its own fouling mechanism, which also depends on the membrane characteristics. Polysaccharides may foul the membranes by adsorption and/or by gel/cake layer formation on the membrane surface. Moreover, the polysaccharides interact, which makes fouling evaluation of certain compound groups very challenging. Novel methods to identify wood extractive and polysaccharide foulants are developed in this thesis. The results show that it is possible to extract and identify wood extractives from membranes fouled in filtration of pulp and paper millstreams. The most effective solvent was found to be acetone:water (9:1 v/v) because it extracted both lipophilic extractives and lignans at high amounts from the fouled membranes and it was also non-destructive for the membrane materials. One hour of extraction was enough to extract wood extractives at high amounts for membrane samples with an area of 0.008 m2. If only qualitative knowledge of wood extractives is needed a simplified extraction procedure can be used. Adsorption was the main fouling mechanism in extractives-induced fouling and dissolved fatty and resin acids were mostly the reason for the fouling; colloidal fouling was negligible. Both process water and membrane characteristics affected extractives-induced fouling. In general, the more hydrophilic regenerated cellulose (RC) membrane fouled less that the more hydrophobic polyethersulfone (PES) and polyamide (PA) membranes independent of the process water used. Monosaccharide and uronic acid units could also be identified from the fouled synthetic polymeric membranes. It was impossible to analyze all monosaccharide units from the RC membrane because the analysis result obtained contained degraded membrane material. One of the fouling mechanisms of carbohydrates was adsorption. Carbohydrates were not potential adsorptive foulants to the sameextent as wood extractives because their amount in the fouled membranes was found to be significantly lower than the amount of wood extractives.

Reflexive model of research-based theatre – processing innovation at the crossroads of theatre, reflection and practice-based innovation activities

Contemporary organisations have to embrace the notion of doing ‘more with less’. This challenges knowledge production within companies and public organisations, forcing them to reorganise their structures and rethink what knowledge production actually means in the context of innovation and how knowledge is actually produced among various professional groups within the organisation in their everyday actions. Innovations are vital for organisational survival, and ‘ordinary’ employees and customers are central but too-often ignored producers of knowledge for contemporary organisations. Broader levels of participation and reflexive practices are needed. This dissertation discusses the missing links between innovation research conducted in the context of industrial management, arts, and culture; applied drama and theatre practices (specifically post-Boalian approaches); and learning – especially organising reflection – in organisational settings. This dissertation (1) explores and extends the role of research-based theatre to organising reflection and reflexive practices in the context of practice-based innovation, (2) develops a reflexive model of RBT for investigating and developing practice-based organisational process innovations in order to contribute to the development of a tool for innovation management and analysis, and (3) operationalises this model within private- and publicsector organisations. The proposed novel reflexive model of research-based theatre for investigating and developing practice-based organisational process innovations extends existing methods and offers a different way of organising reflection and reflexive practices in the context of general innovation management. The model was developed through five participatory action research processes conducted in four different organisations. The results provide learning steps – a reflection path – for understanding complex organisational life, people, and relations amid renewal and change actions. The proposed model provides a new approach to organising and cultivating reflexivity in practice-based innovation activities via research-based theatre. The results can be utilised as a guideline when processing practice-based innovation within private or public organisations. The model helps innovation managers to construct, together with their employees, temporary communities where they can learn together through reflecting on their own and each others’ experiences and to break down assumptions related to their own perspectives. The results include recommendations for practical development steps applicable in various organisations with regard to (i) application of research-based theatre and (ii) related general innovation management. The dissertation thus contributes to the development of novel learning approaches in knowledge production. Keywords: practice-based innovation, research-based theatre, learning, reflection, mode 2b knowledge production

Optimization of strength and toughness on the effect of the weldable high strength steels (hss) used in offshore structures

Optimization of high strength and toughness combination on the effect of weldability is very vital to be considered in offshore oil and gas industries. Having a balanced and improved high strength and toughness is very much recommended in offshore structures for an effective production and viable exploration of hydrocarbons. This thesis aims to investigate the possibilities to improve the toughness of high strength steel. High carbon contents induce hardness and needs to be reduced for increasing toughness. The rare combination of high strength with high toughness possibilities was examined by determining the following toughening mechanism of: Heat treatment and optimal microstructure, Thermomechanical processing, Effect of welding parameters on toughness and weldability of steel. The implementation of weldability of steels to attain high toughness for high strength in offshore structures is mostly in shipbuilding, offshore platforms, and pipelines for high operating pressures. As a result, the toughening mechanisms suggested have benefits to the aims of the effect of high strength to high toughness of steel for efficiency, production and cost reduction.

Capillary electrophoresis for monitoring of carboxylic, phenolic and amino acids in bioprocesses

Bioprocess technology is a multidisciplinary industry that combines knowledge of biology and chemistry with process engineering. It is a growing industry because its applications have an important role in the food, pharmaceutical, diagnostics and chemical industries. In addition, the current pressure to decrease our dependence on fossil fuels motivates new, innovative research in the replacement of petrochemical products. Bioprocesses are processes that utilize cells and/or their components in the production of desired products. Bioprocesses are already used to produce fuels and chemicals, especially ethanol and building-block chemicals such as carboxylic acids. In order to enable more efficient, sustainable and economically feasible bioprocesses, the raw materials must be cheap and the bioprocesses must be operated at optimal conditions. It is essential to measure different parameters that provide information about the process conditions and the main critical process parameters including cell density, substrate concentrations and products. In addition to offline analysis methods, online monitoring tools are becoming increasingly important in the optimization of bioprocesses. Capillary electrophoresis (CE) is a versatile analysis technique with no limitations concerning polar solvents, analytes or samples. Its resolution and efficiency are high in optimized methods creating a great potential for rapid detection and quantification. This work demonstrates the potential and possibilities of CE as a versatile bioprocess monitoring tool. As a part of this study a commercial CE device was modified for use as an online analysis tool for automated monitoring. The work describes three offline CE analysis methods for the determination of carboxylic, phenolic and amino acids that are present in bioprocesses, and an online CE analysis method for the monitoring of carboxylic acid production during bioprocesses. The detection methods were indirect and direct UV, and laser-induced frescence. The results of this work can be used for the optimization of bioprocess conditions, for the development of more robust and tolerant microorganisms, and to study the dynamics of bioprocesses.

Quality, Productivity and Economy in Welding Manufacturing - Case Study: West Africa

This thesis studies quality, productivity and economy in welding manufacturing in West African states such as Ghana, Nigeria and Cameroon. The study consists of two parts: the first part, which forms the theoretical background, reviews relevant literature concerning the metal and welding industries, and measurement of welding quality, productivity and economy. The second part, which is the empirical part, aims to identify activities in the metal manufacturing industries where welding is extensively used and to determine the extent of welding quality, productivity and economy measurements in companies operating in the metal manufacturing industries. Additionally, the thesis aims to identify challenges that companies face and to assess the feasibility of creating a network to address these issues. The research methods used in the empirical part are the case study (qualitative) method and the survey (quantitative) method. However, the case study method was used to elicit information from companies in Ghana, while the survey method was used to elicit information from companies in Nigeria and Cameroon. The study considers important areas that contribute to creating awareness and understanding of the current situation of the welding industry in West Africa. These areas include the metal manufacturing industrial sector, metal products manufactured, metal production and manufacturing systems deployed, welding quality, productivity and economy measurement systems utilized, equipment and materials on the markets, general challenges facing companies in welding operations, welding technology programs and research in local universities, and SWOT analysis of the various West African states. The notable findings indicate that majority of the companies operate in the constructionindustrial sector. Also, majority of the companies are project manufacturing oriented, thus provide services to customers operating in the growing industries such as the oil and gas, mining, food and the energy industry. In addition, only few companies are certified under standards such as ISO 9001, ISO 3834, and OHSAS 18001. More so, majority of the companies employ manual welding technique, and shielded metal arc welding (SMAW) as the commonly used welding process. Finally, welder salary is about € 300 / month as of June 2013 and the average operations turnover of medium to large companies is about € 5 million / year as at 2012. Based on analysis of the results of the study, it is noted that while welding activities are growing, the availability of cheap labor, the need for company and welder qualification and certification, and the need to manufacture innovative products through developmental projects (transfer of welding expertise and technology) remain as untapped opportunities in the welding industry in the West African states. The study serves as a solid platform for further research and concludes with several recommendations for development of the West African welding industry.

Supply network risks and costs in Finnish project business

This report summarizes the results of the survey HAVERI – Supply network risks in business. The survey was conducted in Finland during the spring and summer of year 2013. The survey is part of a large two-year research project started in June 2012 in Finland (on-going 06/2012–07/2014). The project is launched and financed by TEKES, the Finnish Funding Agency for Technology and Innovation, and executed together with the researchers from Lappeenranta University of Technology and Tampere University of Technology. The overall goal of this on-going research project is to find out the decision-making practices in the project-oriented companies in their purchasing decisions especially in the mechanical engineering and construction industries in Finland. The objective of the survey was to gain cross-sectional data concerning the challenges, risks and cost factors in Finnish project business companies. The results show that Finnish companies rely on their experience and supplier references in their risk management. In general, the understanding of the total cost structure varies among the industries and companies. The main cost factor in risk management was costs before the actual purchase decision. Overall, it seems that the monetary value of the whole project and capability of purchasing personnel are the main influencing factors on risk management activity in project purchasing.

Data Management [in eprints] for arts research: the experience at University of the Arts London

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

From KAPTUR to VADS4R: Exploring Research Data Management in the Visual Arts

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Production, isolation and characterization of bioactive peptides with antihypertensive properties from rapeseed and potato protein

Consumers’ increasing awareness of healthiness and sustainability of food presents a great challenge to food industry to develop healthier, biologically active and sustainable food products. Bioactive peptides derived from food proteins are known to possess various biological activities. Among the activities, the most widely studied are antioxidant activities and angiotensin I converting enzyme (ACE) inhibitory activity related to blood pressure regulation and antihypertensive effects. Meanwhile, vast amounts of byproducts with high protein content are produced in food industry, for example potato and rapeseed industries. The utilization of these by-products could be enhanced by using them as a raw material for bioactive peptides. The objective of the present study was to investigate the production of bioactive peptides with ACE inhibitory and antioxidant properties from rapeseed and potato proteins. Enzymatic hydrolysis and fermentation were utilized for peptide production, ultrafiltration and solid-phase extraction were used to concentrate the active peptides, the peptides were fractionated with liquid chromatographic processes, and the peptides with the highest ACE inhibitory capacities were putified and analyzed with Maldi-Tof/Tof to identify the active peptide sequences. The bioavailability of the ACE inhibitory peptides was elucidated with an in vitro digestion model and the antihypertensive effects in vivo of rapeseed peptide concentrates were investigated with a preventive premise in 2K1C rats. The results showed that rapeseed and potato proteins are rich sources of ACE inhibitory and antioxidant peptides. Enzymatic hydrolysis released the peptides effectively whereas fermentation produced lower activities.The native enzymes of potato were also able to release ACE inhibitory peptides from potato proteins without the addition of exogenous enzymes. The rapeseed peptide concentrate was capable of preventing the development of hypertension in vivo in 2K1C rats, but the quality of rapeseed meal used as raw material was found to affect considerably the antihypertensive effects and the composition of the peptide fraction.

Advanced analysis and design methods for preparative chromatographic separation processes

Preparative liquid chromatography is one of the most selective separation techniques in the fine chemical, pharmaceutical, and food industries. Several process concepts have been developed and applied for improving the performance of classical batch chromatography. The most powerful approaches include various single-column recycling schemes, counter-current and cross-current multi-column setups, and hybrid processes where chromatography is coupled with other unit operations such as crystallization, chemical reactor, and/or solvent removal unit. To fully utilize the potential of stand-alone and integrated chromatographic processes, efficient methods for selecting the best process alternative as well as optimal operating conditions are needed. In this thesis, a unified method is developed for analysis and design of the following singlecolumn fixed bed processes and corresponding cross-current schemes: (1) batch chromatography, (2) batch chromatography with an integrated solvent removal unit, (3) mixed-recycle steady state recycling chromatography (SSR), and (4) mixed-recycle steady state recycling chromatography with solvent removal from fresh feed, recycle fraction, or column feed (SSR–SR). The method is based on the equilibrium theory of chromatography with an assumption of negligible mass transfer resistance and axial dispersion. The design criteria are given in general, dimensionless form that is formally analogous to that applied widely in the so called triangle theory of counter-current multi-column chromatography. Analytical design equations are derived for binary systems that follow competitive Langmuir adsorption isotherm model. For this purpose, the existing analytic solution of the ideal model of chromatography for binary Langmuir mixtures is completed by deriving missing explicit equations for the height and location of the pure first component shock in the case of a small feed pulse. It is thus shown that the entire chromatographic cycle at the column outlet can be expressed in closed-form. The developed design method allows predicting the feasible range of operating parameters that lead to desired product purities. It can be applied for the calculation of first estimates of optimal operating conditions, the analysis of process robustness, and the early-stage evaluation of different process alternatives. The design method is utilized to analyse the possibility to enhance the performance of conventional SSR chromatography by integrating it with a solvent removal unit. It is shown that the amount of fresh feed processed during a chromatographic cycle and thus the productivity of SSR process can be improved by removing solvent. The maximum solvent removal capacity depends on the location of the solvent removal unit and the physical solvent removal constraints, such as solubility, viscosity, and/or osmotic pressure limits. Usually, the most flexible option is to remove solvent from the column feed. Applicability of the equilibrium design for real, non-ideal separation problems is evaluated by means of numerical simulations. Due to assumption of infinite column efficiency, the developed design method is most applicable for high performance systems where thermodynamic effects are predominant, while significant deviations are observed under highly non-ideal conditions. The findings based on the equilibrium theory are applied to develop a shortcut approach for the design of chromatographic separation processes under strongly non-ideal conditions with significant dispersive effects. The method is based on a simple procedure applied to a single conventional chromatogram. Applicability of the approach for the design of batch and counter-current simulated moving bed processes is evaluated with case studies. It is shown that the shortcut approach works the better the higher the column efficiency and the lower the purity constraints are.

Mobile Banking and Mobile Payments: Changing Banking Services in Finland

The purpose of this thesis is to examine how mobile banking and mobile payments services will change the banking sector in Finland, and what role non-bank companies from the IT and telecom industries will play in this process. The thesis consists of a literature review and a qualitative study. The literature review forms a comprehensive overview of mobile banking and mobile payments services. The qualitative research was conducted as a descriptive study, focusing on the views of bank and non-bank players. The results show that banks have a significant advantage over their IT and telecom rivals in regards to their service offering, financial buffer, and status as trustworthy institutions. The banks’ embrace of mobile financial services will change the Finnish banking sector into one, with a light branch network focused on sales power, and a heavy emphasis on new mobile devices providing service power regardless of time and place.

Forming i barnehagen i lys av Reggio Emilias atelierkultur

Forming (Arts and crafts) and children’s creative action with materials and tools are less in use in the kindergarten than before. Political focus on children’s early learning has led to shifts in kindergartens toward other specific disciplines, and requirements for individual testing also of the smallest children’s competencies within these. Kindergarten teachers, educators, researchers and participants in social debate have pointed out that there are epistemological contradictions in descriptions of kindergarten quality as well as between current kindergarten policy documents and requirements for the kindergartens’ staff. Meanwhile, the content and methods in many kindergartens are inspired by practice and philosophy in the municipal kindergartens in Reggio Emilia, Italy. Correlation between kindergartens’ formingprojects and experiences from Reggio Emilia is actualized in particular through the workshop and the studio’s role in children’s learning processes. One starting point for the thesis’ problem area is a documented need for more knowledge about kindergarten’s educational content. The overarching goal of the thesis is to develop new knowledge about how learning takes place in kindergarten through examining the field of forming in kindergartens inspired by Reggio Emilia’s atelier culture. The thesis is theoretically anchored within pragmatism, and ties kindergarten’s aesthetic operations with materials and tools to socio-cultural perspective, social constructivism and post humanistic theory. The empirical material is obtained through a qualitative study with ethnography as methodological approach. The fieldwork is conducted in kindergarten, with two leading research questions: 1) How is atelierism perceived and unfolded in Norwegian Reggio Emilia-inspired kindergartens, and 2) how is forming perceived and unfolded in Norwegian Reggio Emilia-inspired kindergartens. A comprehensive and multifaceted material is analyzed, and the results are presented in the form of three themes: The physical environment, Relations and actions in interplay, and Expression forms and forms of expression. Each of these topics are supported by examples from kindergartens’ adult voices and the constructed empirical material. Insights into how learning takes place in the kindergarten subject of forming with inspiration from the Reggio Emilia atelier culture is discussed in the tension between educational philosophy, Nordic kindergarten tradition and neoliberal trends that kindergarten teachers must adhere to. Learning potentials in children’s opportunities for action in forming in light of the atelier appears in the results of the empirical study. The educational context described is characterized by experimental and playful actions where children’s sensations, curiosity and resistance are interacting with the identity of materials and tools. The results imply aesthetic, ethical, democratic and ecological reflections, which are also valid on a practical action level. The thesis contributes to description and understanding of kindergarten’ content and young children’s learning, the importance of atelier culture as inspiration for the kindergarten, and the further development of methodology and documentation of knowledge expressions.

Yliopiston yrittäjämäisyyden sosiaalinen rakentuminen: case Aalto-yliopisto

Keskustelu yrittäjyyden sijoittumisesta yliopistojen tehtäväkenttään on muodostunut 2000-luvun aikana osaksi yhteiskunnallista ja maailmanlaajuista korkeakoulutuksen muutosta. Tämän tutkimuksen tarkoituksena on lisätä ymmärrystä yliopiston yrittäjämäisyyden sosiaalisesta rakentumisesta. Lähestyn yliopiston sisällä tuotettua moniäänistä yrittäjyyspuhetta yliopiston yrittäjämäisyyden todellisuuden representaationa, ja pyrin tekemään siitä selkoa kommunikaatioon kohdistuvan analyysin avulla. Ilmiön empiirinen tarkastelu pohjautuu Aalto-yliopistossa ja sitä edeltäneessä Teknillisessä korkeakoulussa vuosina 2006–2013 kerättyihin tekstiaineistoihin. Aineistojen tulkinta tuottaa monikerroksellista tietoa ilmiöstä niin yksilö- kuin organisaatiotasolla. Tarkastelen tutkimuksessani millaisia merkityksenantoja yrittäjyydelle ja yrittäjämäisyydelle annetaan yliopiston sisällä eri näkökulmista katsottuna, kun yliopisto käy läpi merkittävää organisaatiorakenteellista ja institutionaalista muutosta. Tutkimusasetelman neljä näkökulmaa perustuvat tekniikan alan jatko-opiskelijoiden puheeseen, TKK:n opetussuunnitelmatekstiin, Aalto-yliopiston opettajien puheeseen ja johdon tuottamaan strategiatekstiaineistoon. Tutkimuksen tulosten mukaan käynnissä on ollut akateemisten arvojen ja arvojärjestelmien laajentumisen aika ja tila, jossa yrittäjämäisyys astuu areenalle, mutta sen suppeat tulkinnat eivät tarjoa mahdollisuuksia ruohonjuuritason kiinnittymiseen akateemisesta kulttuurista käsin. Yrittäjyyden ja yrittäjämäisyyden saamat taloudelliskaupalliset merkitykset koetaan uhkaksi, eikä tilannetta helpota yleisesti uuvuttavaksi koettu rakenteellinen ja yhteiskunnallinen yliopiston muutosvaihe. Hallitsevat tarinalinjat kuten puhe kilpailukyvystä ja kilpailutilanteen kovenemisesta tuottavat odotusten viitekehyksen, joilla yliopiston toimintaa raamitetaan ulkoapäin. Yrittäjyyteen laajassa merkityksessä sisältyvät mahdollisuudet jäävät niin ikään hyödyntämättä, ja lukuisat edistämistoiminnot kilpistyvät sosiaalisesti rakentuviin esteisiin. Tässä tutkimuksessa rakentuva laajennettu yliopiston yrittäjämäisyyden viitekehys pyrkii palvelemaan moniäänistymisen tarkoitusta käsitteellisellä tasolla ja avaamaan uusia mahdollisuuksia yliopiston yrittäjämäisyyden edistämiselle.

The role of business model in computer game development organizations

The computer game industry has grown steadily for years, and in revenues it can be compared to the music and film industries. The game industry has been moving to digital distribution. Computer gaming and the concept of business model are discussed among industrial practitioners and the scientific community. The significance of the business model concept has increased in the scientific literature recently, although there is still a lot of discussion going on on the concept. In the thesis, the role of the business model in the computer game industry is studied. Computer game developers, designers, project managers and organization leaders in 11 computer game companies were interviewed. The data was analyzed to identify the important elements of computer game business model, how the business model concept is perceived and how the growth of the organization affects the business model. It was identified that the importance of human capital is crucial to the business. As games are partly a product of creative thinking also innovation and the creative process are highly valued. The same applies to technical skills when performing various activities. Marketing and customer relationships are also considered as key elements in the computer game business model. Financing and partners are important especially for startups, when the organization is dependent on external funding and third party assets. The results of this study provide organizations with improved understanding on how the organization is built and what business model elements are weighted.

Utstillingens retorikk : et bidrag til en retorisk didaktikk for kunst og håndverk

The topic of this dissertation is the didactic exhibition in the Arts and Crafts subject. Exhibiting student work and art and form culture is part of a long professional tradition in the field. Yet, exhibition as form and as a way of learning are inadequately explored and debated. The didactic problem area of the thesis, where studies of formative practices are central, place it within the research field of Educational Slojd. The didactic standpoint and main theoretical perspective relate the project to the Arts didactics research field at the University College of Bergen where the aim is to develop an alternative didactics thinking for the arts; a rhetoric arts didactics. Didactic focus is shifted from the relationship between teacher – pupil – teaching materials, to studies of how knowledge is formulated in specific practices. The thesis has a premise that every exhibition has its own rhetoric and that didactics is inscribed in this rhetoric in the broadest and cultural sense. Through impulses from classical rhetoric and recent text theory, the thesis challenges the Arts and Crafts’s own idiom, its theoretical foundation and didactic grasp such as shown in the discourse established by the discipline and its specific exhibitive practices, as well as studying the relationship between verbal language and the discipline’s own register. The overall objective is to develop knowledge about exhibition rhetoric and its potential as a knowledge and learning arena in this field, and thereby contribute to developing a rhetoric didactics for the Arts and Crafts subject. This raises questions such as: How is an exhibition considered to be used and understood in the subject’s didactics texts and texts about didactics? How do different exhibition spaces inscribe conditions for exhibition work? How can a rhetoric perspective of didactics make aspects of an exhibition’s form register visible and contribute to knowledge of the creative processes in an exhibition? How do some selected exhibitions inscribe creativity and learning? What can a rhetoric perspective bring to the Arts and Crafts? A rhetoric didactics perspective includes knowledge of the tradition. A historical-ideological overview traces how exhibition, of both pupil/student work and of art and form culture, are used and considered as used in the discipline over time. This part can be read separately, but in this thesis, is primarily conceived as a backdrop for the development of the dissertation’s main rhetoric perspective. The empirical data are collected from my teacher training institution and consist of specific exhibition spaces and practices, of which my own production of two exhibitions can link the research to artistic development work. A rhetoric didactics is concrete, specific and contextual. The rhetoric readings are descriptive and show how culture and nature, temporality, materiality and technology are inscribed in the exhibition’s form. Didactic reflection develops from, and close to, the rhetoric readings of the exhibition’s form and content to finally arrive at a rhetorical concept for creativity and learning.