Generic features of eighteenth-century American runaway slave advertisements

Pro-gradu –tutkielmani aiheena ovat 1700-luvun ”karanneet orjat” – sanomalehtiilmoitusten genrelle ominaiset piirteet. Tutkimusaineisto koostuu 190 ilmoituksesta, jotka ovat alkuperäisesti ilmestyneet virginialaisissa, pennsylvanialaisissa ja newyorkilaisissa sanomalehdissä 1730-luvulta 1770-luvulle. Tutkimuksen kohteeksi on rajattu ilmoitukset, joissa yksityishenkilöt ilmoittavat orjan/orjien karanneet ja lupaavat kiinniottajalle palkkion. Tutkielman tarkoituksena on tarkastella, millaisia ovat tyypilliset kielelliset piirteet näissä teksteissä ja millainen on prototyyppinen genren edustaja. Genreteorian lisäksi teoriaosuudessa käsittelen jonkin verran 1700- luvun englannin kielen yleisiä piirteitä sekä orjuuden ja sanomalehtien syntyhistoriaa Amerikassa taustoittaakseni tutkimusta. Analyysissa hyödynnän mm. Swalesin ja Bhatian käyttämää käsitettä siirroista (moves). Tutkin ilmoituksien tyypillistä rakennetta jakamalla ne yhdeksään siirtoon, joilla kaikilla on oma tehtävänsä ilmoituksessa. Jotkut siirrot, kuten karkulaisen kuvailu ja palkkion lupaaminen, esiintyvät kaikissa ilmoituksissa, kun taas toiset siirrot ovat läsnä harvemmin. Muita tälle genrelle tyypillisiä ominaisuuksia ovat esim. ilmoituksissa toistuvat kiinteät fraasit ja tietyt sanastolliset erikoisuudet. Lisäksi tutkin ilmoituksissa käytettäviä tapoja viitata asiaan liittyviin henkilöihin, sekä erilaisia toimia, joita ilmoitusten jättäjät ilmoituksien avulla suorittavat. Genressä on havaittavissa pieniä reilun neljänkymmenen vuoden kuluessa tapahtuneita muutoksia, mutta myös eroavaisuuksia eri siirtokuntien ilmoitusten välillä. Yleisesti voidaan todeta, että vaikka ”karanneet orjat” –ilmoitukset voivat vaihdella rakenteeltaan ja sanavalinnoiltaan, suuri osa ilmoituksista seuraa kuitenkin melko prototyyppistä muottia.

Toimitilaturvallisuuden kehittäminen

Työn tavoitteena oli selvittää mitä toimitilaturvallisuus on, mitkä ovat kohdeyrityksen emoyhtiön vaatimukset toimitilaturvallisuudelle ja mikä on toimitilaturvallisuuden tila diplomityön kohdeyrityksessä. Samalla tarkasteltiin mahdollisuutta toimitilaturvallisuuden mittaamiselle yrityksessä. Työn teoria koskettelee aluksi riskejä ja riskienhallintaa. Yritysriskien kautta siirrytään yritysturvallisuuteen ja erityisesti sen osa-alueista toimitilaturvallisuuteen eli yrityksen fyysiseen turvallisuuteen. Toimitilaturvallisuudesta esitellään sen osa-alueet ja niiden suojauskeinoja. Myös yritysturvallisuuden johtamista, johtamisen kehittämistä, sekä tuon kehityksen seuraamista mittarein käsitellään. Teorian lisäksi esitellään emoyrityksen vaatimukset toimitilaturvallisuudelle. Empiirinen osuus toteutettiin avoimin haastatteluin ja havainnoinnin avulla. Osuudessa tarkasteltiin toimitilaturvallisuuden nykytilaa kohdeyrityksessä verraten sitä teoriaan ja emoyrityksen vaateisiin. Vaikka kohdeyrityksen toimitilaturvallisuus olikin suhteellisen hyvällä mallilla, toimintaehdotuksia eri toimitilaturvallisuuden osa-alueille saatiin useita.

Foodstuffs and medicines as legal categories in the EU and China. Functional foods as a borderline case

The thesis discusses the regulation of foodstuffs and medicines, and particularly the regulation of functional foods. Legal systems investigated are the EU and China. Both are members of the WTO and Codex Alimentarius, which binds European and Chinese rules together. The study uses three Chinese berries as case examples of how product development faces regulation in practice. The berries have traditional uses as herbal medicines. Europe and China have similar nutrition problems to be resolved, such as obesity, cardiovascular disease, and diabetes. The three berries might be suitable raw materials for functional foods. Consumer products with health-enhancing functions, such as lowering blood pressure, might legally be classifi ed either as foodstuffs or medicines. The classifi cation will depend on functions and presentation of the product. In our opinion, food and medicine regulation should come closer together so the classifi cation issue would no longer be an issue. Safety of both foodstuffs and medicines is strictly regulated. With medicines, safety is a more relative concept, where benefi ts of the product are compared to side-effects in thorough scientifi c tests and trials. Foods, on the other hand, are not allowed to have side-effects. Hygiene rules and rules on the use of chemicals apply. In China, food safety is currently at focus as China has had several severe food scandals. Newly developed foods are called novel foods, and are specifi cally regulated. The current European novel food regulation from 1997 treats traditional third country products as novel. The Chinese regulation of 2007 also defi nes novel foods as something unfamiliar to a Chinese consumer. The concepts of novel food thus serve a protectionist purpose. As regards marketing, foods are allowed to bear health claims, whereas medicines bear medicinal claims. The separation is legally strict: foods are not to be presented as having medicinal functions. European nutrition and health claim regulation exists since 2006. China also has its regulation on health foods, listing the permitted claims and how to substantiate them. Health claims are allowed only on health foods. The European rules on medicines include separate categories for herbal medicines, traditional herbal medicines, and homeopathic medicines, where there are differing requirements for scientifi c substantiation. The scientifi c and political grounds for the separate categories provoke criticism. At surface, the Chinese legal system seems similar to the European one. To facilitate trade, China has enacted modern laws. Laws are needed as the country moves from planned economy to market economy: ‘rule of law’ needs to replace ‘rule of man’. Instead of being citizens, Chinese people long were subordinates to the Emperor. Confucius himself advised to avoid confl ict. Still, Chinese people do not and cannot always trust the legal system, as laws are enforced in an inconsistent manner, and courts are weak. In China, there have been problems with confl icting national and local laws. In Europe, the competence of the EU vs. the competence of the Member States is still not resolved, even though the European Commission often states that free trade requires harmonisation. Food and medicine regulation is created by international organisations, food and medicine control agencies, standards agencies, companies and their organisations. Regulation can be divided in ‘hard law’ and ‘soft law’. One might claim that hard law is in crisis, as soft law is gaining importance. If law is out of fashion, regulation certainly isn’t. In the future, ‘law’ might mean a process where rules and incentives are created by states, NGOs, companies, consumers, and other stakeholders. ‘Law’ might thus refer to a constant negotiation between public and private actors. Legal principles such as transparency, equal treatment, and the right to be heard would still be important.

Lasikuituputkien kelauslinjan automatisointi

Lasikuituputkien kelaamiseen tarkoitettu automaatio voidaan toteuttaa suorakulmaisen kolmion trigonometrian perusteella. Kelaaminen tapahtuu pyörittämällä muottia ja liikuttamalla samalla muottia sivuttain. Näin tehdessä saadaan kelattavat lasikuitulangat leviämään koko muotin leveydelle. Jos langat halutaan saada kelattua tiiviisti toistensa viereen, on muotin liikuttava tietty matka yhtä muotin pyörähdystä kohden. Matkaa kutsutaan nousuksi. Nousu riippuu lankojen muodostaman kimpun leveydestä, kelauskulmasta ja muotin säteestä. Kelauskulmalla voidaan vaikuttaa kelattavan tuotteen aksiaaliseen ja pitkittäiseen lujuuteen. Kelauskoneen automaatiojärjestelmä koostuu sähkökäytöistä, ohjaavasta yksiköstä, valvomosta ja erilaisista antureista. Eri osat yhdistetään toisiinsa väylätekniikalla. Sähkökäytöt ovat yleensä servokäyttöjä, koska niiltä vaaditaan tarkkuutta ja nopeutta. Ohjaavana yksikkönä toimii yleensä teollisuus logiikka. Anturointia tarvitaan esimerkiksi hartsin lämpötilan säätöön ja lankojen ratakireyden säätöön. Anturoinnilla ja säädöillä pyritään parantamaan kelattavan tuotteen laatua. Koneen ohjelmallinen toteutus vaatii kelauskoneen mekaniikan ja kelausprosessin ymmärtämistä. Lisäksi on huomioitava koneen käyttäjät ja heidän turvallisuus.

Pk-yrityksen layout-suunnittelu ohutlevytuoteteollisuudessa

Diplomityössä käsitellään omistajanvaihdon myötä tapahtuvaa yritysten yhdentymistä pkt- sektorilla. Tutkimuksen tarkoituksena oli suunnitella layout uuteen halliin sekä suunnitella muuttoprosessi kokonaisuudessaan. Tutkimuksessa käsiteltiin koneiden siirron lisäksi myös yritysten yhdentymistä ja yritysfuusiota. Ratkaisumalleja haettiin kirjallisuudesta, tuotannon seuraamisesta ja edellisistä muutoista syntyneistä kokemuksista. Työn aikana kartoitettiin yritysten nykytilanne ja etsittiin siellä olevat parantamista vaativat kohdat. Lisäksi selvitettiin yritysten tuotanto layout -suunnittelua varten. Layoutin tekemisen runkona käytettiin Mutherin -layoutkaaviota. Tietojen pohjalta tehtiin kolme erillistä mallia, joista hyötyarvomatriisia hyväksi käyttäen valittiin yksi. Lisäksi yritysten yhdentymisen työkirjan avulla tehtiin lista tarvittavista toimenpiteistä ennen muuttoa sekä muuton jälkeen. Tutkimuksessa käsiteltiin myös yrityksen ohjelmainvestointeja sekä levytyökeskuksen että laserleikkauskoneen nestaukseen. Lisäksi työssä käsiteltiin myös uusia koneinvestointeja ja uutta organisaatiokaaviota.

Performance of high power fibre laser cutting of thick-section steel and mediumsection aluminium

Cutting of thick section stainless steel and mild steel, and medium section aluminium using the high power ytterbium fibre laser has been experimentally investigated in this study. Theoretical models of the laser power requirement for cutting of a metal workpiece and the melt removal rate were also developed. The calculated laser power requirement was correlated to the laser power used for the cutting of 10 mm stainless steel workpiece and 15 mm mild steel workpiece using the ytterbium fibre laser and the CO2 laser. Nitrogen assist gas was used for cutting of stainless steel and oxygen was used for mild steel cutting. It was found that the incident laser power required for cutting at a given cutting speed was lower for fibre laser cutting than for CO2 laser cutting indicating a higher absorptivity of the fibre laser beam by the workpiece and higher melting efficiency for the fibre laser beam than for the CO2 laser beam. The difficulty in achieving an efficient melt removal during high speed cutting of the 15 mmmild steel workpiece with oxygen assist gas using the ytterbium fibre laser can be attributed to the high melting efficiency of the ytterbium fibre laser. The calculated melt flow velocity and melt film thickness correlated well with the location of the boundary layer separation point on the 10 mm stainless steel cut edges. An increase in the melt film thickness caused by deceleration of the melt particles in the boundary layer by the viscous shear forces results in the flow separation. The melt flow velocity increases with an increase in assist gas pressure and cut kerf width resulting in a reduction in the melt film thickness and the boundary layer separation point moves closer to the bottom cut edge. The cut edge quality was examined by visual inspection of the cut samples and measurement of the cut kerf width, boundary layer separation point, cut edge squareness (perpendicularity) deviation, and cut edge surface roughness as output quality factors. Different regions of cut edge quality in 10 mm stainless steel and 4 mm aluminium workpieces were defined for different combinations of cutting speed and laserpower.Optimization of processing parameters for a high cut edge quality in 10 mmstainless steel was demonstrated

Perspectives interculturelles et interlinguistiques sur le discours académique – Crosscultural and Crosslinguistic Perspectives on Academic Discourse. Volume 1

The Department of French Studies of the University of Turku (Finland) organized an International Bilingual Conference on Crosscultural and Crosslinguistic Perspectives on Academic Discourse from 2022 May 2005. The event hosted specialists on Academic Discourse from Belgium, Finland, France, Germany, Italy, Norway, Spain, and the USA. This book is the first volume in our series of publications on Academic Discourse (AD hereafter). The following pages are composed of selected papers from the conference and focus on different aspects and analytical frameworks of Academic Discourse. One of the motivations behind organizing the conference was to examine and expand research on AD in different languages. Another one was to question to what extent academic genres are culturebound and language specific or primarily field or domain specific. The research carried out on AD has been mainly concerned with the use of English in different academic settings for a long time now – mainly written contexts – and at the expense of other languages. Alternatively the academic genre conventions of English and English speaking world have served as a basis for comparison with other languages and cultures. We consider this first volume to be a strong contribution to the spreading out of researches based on other languages than English in AD, namely Finnish, French, Italian, Norwegian and Romanian in this book. All the following articles have a strong link with the French language: either French is constitutive of the AD corpora under examination or the article was written in French. The structure of the book suggests and provides evidence that the concept of AD is understood and tackled to varying degrees by different scholars. Our first volume opens up the discussion on what AD is and backs dissemination, overlapping and expansion of current research questions and methodologies. The book is divided into three parts and contains four articles in English and six articles in French. The papers in part one and part two cover what we call the prototypical genre of written AD, i.e. the research article. Part one follows up on issues linked to the 13 Research Article (RA hereafter). Kjersti Fløttum asks wether a typical RA exists and concentrates on authors’ voices in RA (self and other dimensions), whereas Didriksen and Gjesdal’s article focuses on individual variation of the author’s voice in RA. The last article in this section is by Nadine Rentel and deals with evaluation in the writing of RA. Part two concentrates on the teaching and learning of AD within foreign language learning, another more or less canonical genre of AD. Two aspects of writing are covered in the first two articles: foreign students’ representations on rhetorical traditions (Hidden) and a contrastive assessment of written exercices in French and Finnish in Higher Education (Suzanne). The last contribution in this section on AD moves away from traditional written forms and looks at how argumentation is constructed in students’ oral presentations (Dervin and Fauveau). The last part of the book continues the extension by featuring four articles written in French exploring institutional and scientific discourses. Institutional discourses under scrutiny include the European Bologna Process (Galatanu) and Romanian reform texts (Moilanen). As for scientific discourses, the next paper in this section deconstructs an ideological discourse on the didactics of French as a foreign language (Pescheux). Finally, the last paper in part three reflects on varied forms of AD at university (Defays). We hope that this book will add some fuel to continue discussing diverse forms of and approches to AD – in different languages and voices! No need to say that with the current upsurge in academic mobility, reflecting on crosscultural and crosslinguistic AD has just but started.

The True Brand Loyalty in the Finnish Tabloid Industry

Asiakas- ja brandiuskollisuutta on tutkittu 1920-luvulta alkaen ja sitä käsittelevän kirjallisuuden kirjo on hyvin laaja. Empiirisiä tutkimuksia löytyy kattava joukko aina pankkimaailmasta päivittäiskaupan tuotteisiin. Iltapäivälehtimarkkinaa tutkivaa empiiristä asiakas- tai brandiuskollisuustutkimusta ei kuitenkaan toistaiseksi ole tieteellisen tutkimuksen saralla tehty. Tässä tutkimuksessa perehdytään asiakas- ja brandiuskollisuuden maailmaan ja tutkitaan brandiuskollisuuden toteutumista suomalaisien iltapäivälehtien keskuudessa. Tutkimuksen keskeisin tavoite on selvittää, voidaanko todeta asiakas- ja brandiuskollisuutta olevan suomalaisien iltapäivälehtien keskuudessa ja mikäli sitä todetaan olevan, mitkä ovat ne tekijät, jotka tämän uskollisuuden muodostumiseen vaikuttavat. Tutkimus toteutettiin yhteistyössä toisen suuren suomalaisen iltapäivälehtitalon kanssa. Empiirinen tutkimus toteutettiin strukturoituna Internet-kyselynä, josta saatu aineisto analysoitiin kvantitatiivisin tutkimusmenetelmin. Tutkimuksen tulokset osoittavat, että asiakas- ja brandiuskollisuutta löytyy suomalaisien iltapäivälehtien keskuudessa. Tärkeimmät havainnot osoittavat, että muun muassa uskollisuus iltapäivälehden verkkosivustoa kohtaan vaikuttaa positiivisesti uskollisuuteen ja toistuvaan ostokäyttäytymiseen samaa iltapäivälehteä kohtaan. Tämä on merkittävä löytö, sillä asian on monissa aiemmissa tutkimuksissa oletettu olevan päinvastoin. Myös luottamus brandiin, sitoutuneisuus brandiin, asiakkaan kokemat hyödyt ja asiakastyytyväisyys todettiin tutkimustuloksien pohjalta vaikuttavan positiivisesti sekä asenteellisen että behavioristisen uskollisuuden muodostumiseen iltapäivälehtiä kohtaan.

Application of Computational Fluid Dynamics in Modeling Blood Flow in Human Thoracic Aorta

The aim of this study was to simulate blood flow in thoracic human aorta and understand the role of flow dynamics in the initialization and localization of atherosclerotic plaque in human thoracic aorta. The blood flow dynamics in idealized and realistic models of human thoracic aorta were numerically simulated in three idealized and two realistic thoracic aorta models. The idealized models of thoracic aorta were reconstructed with measurements available from literature, and the realistic models of thoracic aorta were constructed by image processing Computed Tomographic (CT) images. The CT images were made available by South Karelia Central Hospital in Lappeenranta. The reconstruction of thoracic aorta consisted of operations, such as contrast adjustment, image segmentations, and 3D surface rendering. Additional design operations were performed to make the aorta model compatible for the numerical method based computer code. The image processing and design operations were performed with specialized medical image processing software. Pulsatile pressure and velocity boundary conditions were deployed as inlet boundary conditions. The blood flow was assumed homogeneous and incompressible. The blood was assumed to be a Newtonian fluid. The simulations with idealized models of thoracic aorta were carried out with Finite Element Method based computer code, while the simulations with realistic models of thoracic aorta were carried out with Finite Volume Method based computer code. Simulations were carried out for four cardiac cycles. The distribution of flow, pressure and Wall Shear Stress (WSS) observed during the fourth cardiac cycle were extensively analyzed. The aim of carrying out the simulations with idealized model was to get an estimate of flow dynamics in a realistic aorta model. The motive behind the choice of three aorta models with distinct features was to understand the dependence of flow dynamics on aorta anatomy. Highly disturbed and nonuniform distribution of velocity and WSS was observed in aortic arch, near brachiocephalic, left common artery, and left subclavian artery. On the other hand, the WSS profiles at the roots of branches show significant differences with geometry variation of aorta and branches. The comparison of instantaneous WSS profiles revealed that the model with straight branching arteries had relatively lower WSS compared to that in the aorta model with curved branches. In addition to this, significant differences were observed in the spatial and temporal profiles of WSS, flow, and pressure. The study with idealized model was extended to study blood flow in thoracic aorta under the effects of hypertension and hypotension. One of the idealized aorta models was modified along with the boundary conditions to mimic the thoracic aorta under the effects of hypertension and hypotension. The results of simulations with realistic models extracted from CT scans demonstrated more realistic flow dynamics than that in the idealized models. During systole, the velocity in ascending aorta was skewed towards the outer wall of aortic arch. The flow develops secondary flow patterns as it moves downstream towards aortic arch. Unlike idealized models, the distribution of flow was nonplanar and heavily guided by the artery anatomy. Flow cavitation was observed in the aorta model which was imaged giving longer branches. This could not be properly observed in the model with imaging containing a shorter length for aortic branches. The flow circulation was also observed in the inner wall of the aortic arch. However, during the diastole, the flow profiles were almost flat and regular due the acceleration of flow at the inlet. The flow profiles were weakly turbulent during the flow reversal. The complex flow patterns caused a non-uniform distribution of WSS. High WSS was distributed at the junction of branches and aortic arch. Low WSS was distributed at the proximal part of the junction, while intermedium WSS was distributed in the distal part of the junction. The pulsatile nature of the inflow caused oscillating WSS at the branch entry region and inner curvature of aortic arch. Based on the WSS distribution in the realistic model, one of the aorta models was altered to induce artificial atherosclerotic plaque at the branch entry region and inner curvature of aortic arch. Atherosclerotic plaque causing 50% blockage of lumen was introduced in brachiocephalic artery, common carotid artery, left subclavian artery, and aortic arch. The aim of this part of the study was first to study the effect of stenosis on flow and WSS distribution, understand the effect of shape of atherosclerotic plaque on flow and WSS distribution, and finally to investigate the effect of lumen blockage severity on flow and WSS distributions. The results revealed that the distribution of WSS is significantly affected by plaque with mere 50% stenosis. The asymmetric shape of stenosis causes higher WSS in branching arteries than in the cases with symmetric plaque. The flow dynamics within thoracic aorta models has been extensively studied and reported here. The effects of pressure and arterial anatomy on the flow dynamic were investigated. The distribution of complex flow and WSS is correlated with the localization of atherosclerosis. With the available results we can conclude that the thoracic aorta, with complex anatomy is the most vulnerable artery for the localization and development of atherosclerosis. The flow dynamics and arterial anatomy play a role in the localization of atherosclerosis. The patient specific image based models can be used to diagnose the locations in the aorta vulnerable to the development of arterial diseases such as atherosclerosis.

Advanced welding technologies used for arctic metal structures

Rapid depletion of easy-to-access fossil fuel, predominantly, oil and gas resources has now necessitated increase in need to develop new oil and gas sources in ever more remote and hostile environments. This is necessary in order to explore more oil and gas resources to meet rapidly rising long-term energy demand in the world, both at present and in the nearest future. Arctic is one of these harsh environments, where enormous oil and gas resources are available, containing about 20% of the world total oil and gas, but the environmental conditions are very harsh and hostile. However, virtually all the facilities required for the exploration and development of this new energy source are constructed with metals as well as their alloys and are predominantly joined together by welding processes and technologies. Meanwhile, due to entirely different environment from the usual moderate temperate region, conventional welding technologies, common metals and their alloys cannot be applied as this Arctic environment demand metals structures with very high toughness and strength properties under extremely low temperature. This is due to the fact that metals transit from ductility to brittleness as the temperature moves toward extreme negative values. Hence, this research work investigates and presents the advanced welding technologies applicable to Arctic metal structures which can give satisfactory weldments under active Arctic service conditions. .

Kokemäenjoen suiston kehitys, maaperämuodostumat ja niiden kemialliset piirteet

Suurelta osin Natura-alueeseen kuuluvan Kokemäenjoen suistoalueen kuivan maan ja suiston edustan vesialueen erityyppisten maaperäkerrostumien kerrosjärjestys ja alueellinen jakautuminen selvitettiin pintamaaperän kartoituksella, tutkimuskaivannoilla ja kairauksella. Suiston kerrostumat luokiteltiin viiteen maaperämuodostumaan. Vanhimmasta nuorimpaan, Toukari, Vainio-Mattila, Hevosluoto, Lanajuopa ja Säikkä muodostumaan. Nämä edustavat vanhoja Itämeren altaan ja nuorempia merelle päin etenevän suiston eri osien kerrostumisympäristöjä. Eri muodostumien fysikaaliset ja kemialliset ominaisuudet kuvattiin ja ne eroavat luonteeltaan ratkaisevasti toisistaan. Suiston etenemistä edustavat Hevosluoto- ja Säikkä-muodostumat ovat kontaminoituneet 1900-luvun alkupuolelta lähtien yhä voimakkaammin ihmistoiminnasta kertyvistä raskasmetallipitoisuuksista ja orgaanisista haitta-aineista. Tämä näkyy erityisesti elohopean, kadmiumin, arseenin, lyijyn, sinkin, nikkelin, dioksiinien ja furaanien kokonaispitoisuuksien kasvuna näissä muodostumissa. Pitoisuudet ovat suurimpia muodostumien nuorimmissa osissa. Kuivalla maalla raskasmetallipitoisuudet ylittävät paikoin valtioneuvoston pilaantuneelle maaperälle asettamat kynnysarvot, jolloin säädökset on huomioitava suiston maaperää muokattaessa. Vesialueella nämä kynnysarvot ylittyvät myös orgaanisten haitta-aineiden osalta. Tietyin osin ovat esimerkiksi arseenin ja nikkelin osalta taustapitoisuudet suistoalueen vanhimmassa Toukari muodostumassa jo luontaisesti kynnysarvoja suuremmat. Tämä pitää osata ottaa huomioon maansiirtotoimenpiteitä suunniteltaessa. Suistoon kerrostuvan maa-aineksen ja nopean maankohoamisen vuoksi suisto etenee nykyisin 30-40 m vuodessa merialueelle päin. Tämä mataloittaa vääjäämättömästi suiston edustan vesialueita kerrostumisen siirtyessä merelle päin. Näin myös Natura-alueen ainutlaatuiset biotoopit vähitellen siirtyvät merelle päin.

Driver of Demand in Cargo and Passenger Traffic Between Penta Ports

Maritime transport moves around 6 billion tonnes of freight every year. The freight consists of liquid bulks (45%), dry bulks (23%) and general cargo (32%). Freight traffic and transports chains vary according to region, commodity and the origin and the destination of freight. In the European Union the ports sector handles over 90% of the trade with third countries. The share of intra-EU trade is approximately 30% of the total transportation and the number of passengers is over 200 million every year. The Baltic Sea has more than 50,000 vessels a year pass the Skaw at the northernmost tip of Denmark on their way into or out of the Baltic. Roughly 60% to 70% of these vessels are cargo vessels and 17% to 25% tankers. Ports and maritime transport play a crucial role in global commerce today. Today’s business environment is changing rapidly, and the constant changes create challenges for the transport industry and maritime traffic. Ports have to adapt to continuous changes in economic structures, logistics demands, and people’s travel and leisure patterns. In order to ensure the competitiveness of sea connections, the ports need to fully enhance multilateral cross-border understanding and cooperation. In this report the focus is on liner traffic between five ports in the Central Baltic Region: Stockholm, Tallinn, Helsinki Turku and Naantali. The report defines the drivers of the demand for cargo and passenger traffic and highlights the most important factors. The economic situation and foreign trade of each county are elaborated on with detailed information about the flows of traffic between the five ports. Based on expert interviews, the main characteristics of each port, including strengths and weaknesses, are presented. The report is based on primary and secondary data. Primary data was received through interviews and mail surveys. Secondary data was attained through a literature research, statistics, data given by the PENTA ports and webpages. The report is divided into two main parts: the drivers creating the demand for transport and the results of current cargo and passenger flows between PENTA ports.

Reflexive Space. A Constructionist Model of the Russian Reflexive Marker

This study examines the structure of the Russian Reflexive Marker ( ся/-сь) and offers a usage-based model building on Construction Grammar and a probabilistic view of linguistic structure. Traditionally, reflexive verbs are accounted for relative to non-reflexive verbs. These accounts assume that linguistic structures emerge as pairs. Furthermore, these accounts assume directionality where the semantics and structure of a reflexive verb can be derived from the non-reflexive verb. However, this directionality does not necessarily hold diachronically. Additionally, the semantics and the patterns associated with a particular reflexive verb are not always shared with the non-reflexive verb. Thus, a model is proposed that can accommodate the traditional pairs as well as for the possible deviations without postulating different systems. A random sample of 2000 instances marked with the Reflexive Marker was extracted from the Russian National Corpus and the sample used in this study contains 819 unique reflexive verbs. This study moves away from the traditional pair account and introduces the concept of Neighbor Verb. A neighbor verb exists for a reflexive verb if they share the same phonological form excluding the Reflexive Marker. It is claimed here that the Reflexive Marker constitutes a system in Russian and the relation between the reflexive and neighbor verbs constitutes a cross-paradigmatic relation. Furthermore, the relation between the reflexive and the neighbor verb is argued to be of symbolic connectivity rather than directionality. Effectively, the relation holding between particular instantiations can vary. The theoretical basis of the present study builds on this assumption. Several new variables are examined in order to systematically model variability of this symbolic connectivity, specifically the degree and strength of connectivity between items. In usage-based models, the lexicon does not constitute an unstructured list of items. Instead, items are assumed to be interconnected in a network. This interconnectedness is defined as Neighborhood in this study. Additionally, each verb carves its own niche within the Neighborhood and this interconnectedness is modeled through rhyme verbs constituting the degree of connectivity of a particular verb in the lexicon. The second component of the degree of connectivity concerns the status of a particular verb relative to its rhyme verbs. The connectivity within the neighborhood of a particular verb varies and this variability is quantified by using the Levenshtein distance. The second property of the lexical network is the strength of connectivity between items. Frequency of use has been one of the primary variables in functional linguistics used to probe this. In addition, a new variable called Constructional Entropy is introduced in this study building on information theory. It is a quantification of the amount of information carried by a particular reflexive verb in one or more argument constructions. The results of the lexical connectivity indicate that the reflexive verbs have statistically greater neighborhood distances than the neighbor verbs. This distributional property can be used to motivate the traditional observation that the reflexive verbs tend to have idiosyncratic properties. A set of argument constructions, generalizations over usage patterns, are proposed for the reflexive verbs in this study. In addition to the variables associated with the lexical connectivity, a number of variables proposed in the literature are explored and used as predictors in the model. The second part of this study introduces the use of a machine learning algorithm called Random Forests. The performance of the model indicates that it is capable, up to a degree, of disambiguating the proposed argument construction types of the Russian Reflexive Marker. Additionally, a global ranking of the predictors used in the model is offered. Finally, most construction grammars assume that argument construction form a network structure. A new method is proposed that establishes generalization over the argument constructions referred to as Linking Construction. In sum, this study explores the structural properties of the Russian Reflexive Marker and a new model is set forth that can accommodate both the traditional pairs and potential deviations from it in a principled manner.

Market integration, return and volatility dynamics; empirical evidence from African stock markets

Frontier and Emerging economies have implemented policies with the objective of liberalizing their equity markets. Equity market liberalization opens the domestic equity market to foreign investors and as well paves the way for domestic investors to invest in foreign equity securities. Among other things, equity market liberalization results in diversification benefits. Moreover, equity market liberalization leads to low cost of equity capital resulting from the lower rate of return by investors. Additionally, foreign and local investors share any potential risks. Liberalized equity markets also become liquid considering that there are more investors to trade. Equity market liberalization results in financial integration which explains the movement of two markets. In crisis period, increased volatility and co-movement between two markets may result in what is termed contagion effects. In Africa, major moves toward financial liberalization generally started in the late 1980s with South Africa as the pioneer. Over the years, researchers have studied the impact of financial liberalization on Africa’s economic development with diverse results; some being positive, others negative and still others being mixed. The objective of this study is to establish whether African stock-markets are integrated into the United States (US) and World market. Furthermore, the study helps to see if there are international linkages between the Africa, US and the world markets. A Bivariate- VAR- GARCH- BEKK model is employed in the study. In the study, the effect of thin trading is removed through series of econometric data purification. This is because thin trading, also known as non-trading or inconsistency of trading, is a main feature of African markets and may trigger inconsistency and biased results. The study confirmed the widely established results that the South Africa and Egypt stock markets are highly integrated with the US and World market. Interestingly, the study adds to knowledge in this research area by establishing the fact that Kenya is very integrated with the US and World markets and that it receives and exports past innovations as well as shocks to and from the US and World market.

Det planlagda och det som visar sig : klasslärarstuderandes syn på undervisning i teknisk slöjd

Sloyd as an activity concretizes man’s ability to, with the help of mind and body, reshape materials into objects and change her conditions for survival. The sloyd actor outside school works when the spirit moves her, while the pupil in school is expected to sloyd regardless of motivation. Subject teachers become experts on sloyd in educational settings, while the qualification requirements may set the class teachers’ voluntariness within parenthesis. All class teachers qualify to teach all core subjects of the national curriculum in Finland from preschool to grade six. The aim of the current thesis is to deepen the knowledge on how the science of sloyd education can support class teacher students’ future teaching in sloyd. In the empirical part of the study, Swedish-speaking Finnish class teacher students’ views on technical sloyd as one of their future subjects for teaching are examined. The class teacher’s qualifying skills in teaching technical sloyd are expected to take shape during only a few ECTS study points. The teacher students’ experience of the subject from the pupil’s perspective is supposed to move into a budding teacher subject. In a research-based teacher education, self-reflection and reflection as a dialogue are extended aided by research results. Intuitive thinking interplays with rational thinking during this time. The teacher student’s approach to make use of the autonomous free space in teaching is, in the current thesis, as considerations where the individual weighs the pros and cons in relation to various phenomena in sloyd and the school overall. The basis for an individual autonomy is shaped and is expected to interplay on the common arena of autonomy. In the exercise of their profession, the class teacher teaching sloyd is expected to oscillate between the sloyd educational practice and theory. The first step in this movement within the teacher education is the coverage of a selection of theories during the studies. The empirical part of the study is carried out at two separate occasions with directed open-ended interviews with fifteen class teacher students in the beginning and end of their first year of study. The data was analysed with a hermeneutic approach and a qualitatively oriented approach to content analysis. The results are mirrored against theory within the science of sloyd education. The results show that class teacher students have a versatile view of educational sloyd. The overall results overthrow parts of the researcher’s pre-understanding. The viewpoint of the students seems to broaden from a merely manual activity to seeing sloyd as an educational activity. In order for the results to gain significance in the teacher education of the future, a line of reasoning is conducted in order to recommend an extended dialogue and thirteen possible themes for enriching discussions are put forth as a result of the present study. The extended dialogue focuses on that teacher education should make conscious ventures to create opportunities for the students to take part in effective discussions on the subject of sloyd, complementing the existing dialogue between the teacher educator and the students. This thesis lends support to reflections on the following aspects of educational sloyd in these dialogues: the reasons for why the sloyd subject exists, the ambitions of the subject, the content and organization of the subject for students as well as for the teacher educators.