Practical applications of a systematic approach to the chemical abatement of pollutants in water and air

The present dissertation is devoted to the systematic approach to the development of organic toxic and refractory pollutants abatement by chemical decomposition methods in aqueous and gaseous phases. The systematic approach outlines the basic scenario of chemical decomposition process applications with a step-by-step approximation to the most effective result with a predictable outcome for the full-scale application, confirmed by successful experience. The strategy includes the following steps: chemistry studies, reaction kinetic studies in interaction with the mass transfer processes under conditions of different control parameters, contact equipment design and studies, mathematical description of the process for its modelling and simulation, processes integration into treatment technology and its optimisation, and the treatment plant design. The main idea of the systematic approach for oxidation process introduction consists of a search for the most effective combination between the chemical reaction and the treatment device, in which the reaction is supposed to take place. Under this strategy,a knowledge of the reaction pathways, its products, stoichiometry and kinetics is fundamental and, unfortunately, often unavailable from the preliminary knowledge. Therefore, research made in chemistry on novel treatment methods, comprisesnowadays a substantial part of the efforts. Chemical decomposition methods in the aqueous phase include oxidation by ozonation, ozone-associated methods (O3/H2O2, O3/UV, O3/TiO2), Fenton reagent (H2O2/Fe2+/3+) and photocatalytic oxidation (PCO). In the gaseous phase, PCO and catalytic hydrolysis over zero valent ironsare developed. The experimental studies within the described methodology involve aqueous phase oxidation of natural organic matter (NOM) of potable water, phenolic and aromatic amino compounds, ethylene glycol and its derivatives as de-icing agents, and oxygenated motor fuel additives ¿ methyl tert-butyl ether (MTBE) ¿ in leachates and polluted groundwater. Gas-phase chemical decomposition includes PCO of volatile organic compounds and dechlorination of chlorinated methane derivatives. The results of the research summarised here are presented in fifteenattachments (publications and papers submitted for publication and under preparation).

Controlling Access to Personal Information

Tässä diplomityössä käsitellään henkilökohtaisen tiedon saannin kontrollointia ja tiedon kuvaamista. Työn käytännön osuudessa suunniteltiin XML –malli henkilökohtaisen tiedon kuvaamiseen. Henkilökohtaisten tietojen käyttäminen mahdollistaa henkilökohtaisen palvelun tarjoamisen ja myös palvelun automatisoinnin käyttäjälle. Henkilökohtaisen tiedon kuvaaminen on hyvin oleellista, jotta palvelut voivat kysellä ja ymmärtää tietoja. Henkilökohtaiseen tietoon vaikuttaa erilaisia tekijöitä, jotka on myös otettava huomioon tietoa kuvattaessa. Henkilökohtaisen tiedon leviäminen eri palveluiden tarjoajille tuo mukanaan myös riskejä. Henkilökohtaisen tiedon joutuminen väärän henkilön käsiin saattaa aiheuttaa vakaviakin ongelmia tiedon omistajalle. Henkilökohtaisen tiedon turvallisen ja luotettavan käytettävyyden kannalta onkin hyvin oleellista, että käyttäjällä on mahdollisuus kontrolloida kenelle hän haluaa luovuttaa mitäkin tietoa.

Minimization of the experimental workload for the prediction of pollutants propagation in rivers. Mathematical modelling and knowledge re-use

The present thesis in focused on the minimization of experimental efforts for the prediction of pollutant propagation in rivers by mathematical modelling and knowledge re-use. Mathematical modelling is based on the well known advection-dispersion equation, while the knowledge re-use approach employs the methods of case based reasoning, graphical analysis and text mining. The thesis contribution to the pollutant transport research field consists of: (1) analytical and numerical models for pollutant transport prediction; (2) two novel techniques which enable the use of variable parameters along rivers in analytical models; (3) models for the estimation of pollutant transport characteristic parameters (velocity, dispersion coefficient and nutrient transformation rates) as functions of water flow, channel characteristics and/or seasonality; (4) the graphical analysis method to be used for the identification of pollution sources along rivers; (5) a case based reasoning tool for the identification of crucial information related to the pollutant transport modelling; (6) and the application of a software tool for the reuse of information during pollutants transport modelling research. These support tools are applicable in the water quality research field and in practice as well, as they can be involved in multiple activities. The models are capable of predicting pollutant propagation along rivers in case of both ordinary pollution and accidents. They can also be applied for other similar rivers in modelling of pollutant transport in rivers with low availability of experimental data concerning concentration. This is because models for parameter estimation developed in the present thesis enable the calculation of transport characteristic parameters as functions of river hydraulic parameters and/or seasonality. The similarity between rivers is assessed using case based reasoning tools, and additional necessary information can be identified by using the software for the information reuse. Such systems represent support for users and open up possibilities for new modelling methods, monitoring facilities and for better river water quality management tools. They are useful also for the estimation of environmental impact of possible technological changes and can be applied in the pre-design stage or/and in the practical use of processes as well.

Osaamisen hallinta suurissa muutosprojekteissa

Ydinvoimatoiminta on muuta teollisuustoimintaa huomattavasti säädellympi alue, missä organisaatioiden riittävä osaaminen on ydinturvallisuuden kannalta tärkeää. Tästä syystä osaamisen riittävyyden takaamiseksi panostetaan tinkimättömästi. Etenkin prosessi- ja turvajärjestelmiin tehtävät muutos- modernisointityöt luovat haasteita organisaatioiden nykyosaamiselle, koska muutosten hallinta edellyttää organisaatioilta jatkuvaa oppimista ja osaamisen kehittämistä. Fortum Power & Heat Oy:n omistamalla ydinvoimalaitoksella käynnistettiin vuoden 2005 alussa laaja automaatiouusintaan tähtäävä projekti. Järjestelmien kokonaistoimittajaksi oli valittu ranskalais-saksalainen Areva NP GmbH – Siemens AG – konsortio. Konsortion kokonaistoimitukseen kuuluu automaatiojärjestelmien uusimisen lisäksi myösydinvoimalaitoksen henkilöstön kouluttaminen. Loviisa ydinvoimalaitoksen käyttöluvan haltijana Fortum Power & Heat Oy on kokonaisvastuullinen ydinvoimalaitoksen toiminnasta. Täten myös henkilöstön riittävä osaaminen ja pätevyys ovat Fortumin vastuulla. Toimittajan järjestämien koulutustilaisuuksien avulla hankittu uusi osaaminen on havaittu riittämättömäksi. Tämän on koettu johtuvan osittain teoriaan painottuvasta koulutusmateriaalista ja myös siitä, että käytännön tarjoamiin koulutustilaisuuksiin kuten esimerkiksi osallistuminen suunnittelutyöhön ei ole hakeuduttu. Lisäksi koulutus kaipaa kokonaisuudessaan kehittämistä. Tästä johtuen ydinvoimalaitosten muutostöihin liittyvän henkilöstön osaamisen ja pätevyyden selvittämiseksi käynnistettiin tämä tutkimus. Tutkimuksessa on tunnistettu useita sellaisia kehityskohteita, joita tehostamalla on mahdollista kehittää automaatioylläpitoryhmän osaamista. Lisäksi on esitetty menettelytapoja ja käytäntöjä, joilla ylläpidon koulutusta on mahdollista tehostaa. Tutkimuksen tuotokset toimivat suuntaviivoina organisaation kehittämisen toteutukselle.

Cultural aspects of globalizing university-industry knowledge interaction in China

Previous studies of the local involvement of multinational corporation (MNC) subsidiaries focus on host-country firms and local business partners such as suppliers and customers. The role of host-country universities in the same context of innovation networks is neglected. Furthermore, there are many organizational culture- and knowledge-related differences between universities and companies, and this is likely to pose additional challenges for successful collaboration. Early university-industry (U-I) studies have primarily been limited within a national boundary, being concerned with a single level of culture (i.e., at an organizational level) and one-way knowledge transfer from university to industry. Research on more dynamic knowledge interaction in multinational settings is lacking. This is particularly true in the business context of China. In today’s globalizing and rapidly changing organizations, addressing cultural differences and clashes is an everyday reality, and inter-cultural U-I collaboration is becoming a key asset for gaining global competitiveness. This study deals with Finnish MNC subsidiaries’ research collaboration with Chinese universities. It aims to explore the essence of such U-I collaboration and knowledge interaction, uncovering the deep functioning mechanisms of culture underlying effective collaborative knowledge creation and innovation. The study reviews critically different bodies of literature including knowledge management theories and studies, U-I collaboration and knowledge interaction, and cross-cultural research in terms of organizational knowledge generation and utilization. It adopts a case study strategy with qualitative research methods, and data is collected through in-depth interviews and participant observation. The study presents the following major findings: 1. In the light of a comprehensive analysis of U-I collaboration, an effective matching strategy is proposed, in the assumption that good alignment of knowledge interaction strategies and approaches with their corresponding knowledge type, capability development and research task may greatly enhance the effectiveness of cross-cultural U-I collaboration and knowledge interaction. 2. It is proposed that in the Chinese MNC context more dynamic types of knowledge interaction like knowledge co-creation should be of key concern particularly when dealing simultaneously with multi-disciplinary applied research of human factors and technologies. U-I knowledge interaction, otherwise, pays attention only to the study of one-way technology and knowledge transfer. 3. It is posited that the influence of culture on collaborative knowledge interaction can be studied in a valuable way when knowledge-related variables are simultaneously taken into account. A systematic analysis of the role of knowledge in cross-cultural knowledge interaction could best be approached from multi-aspects of knowledge including not only nature, characteristics and types of knowledge but also the process of knowledge (e.g., intensifications of knowledge interaction). 4. The study demonstrates the significant role of aspects of the host-country culture (e.g., Chinese guanxi) in U-I collaboration and knowledge interaction. This is evident, for instance, in issues related to interpersonal relationships and trust, true interest and the relatedness of the research, mutual commitment and learning, communication intensity and interaction, and awareness of cultural and knowledge-related differences between collaboration partners. Theoretical and practical implications of the findings are suggested and discussed.

Marketing culture of Finnish research libraries : an analysis of marketing attitude, knowledge and behaviour

The aim of the present dissertation is to investigate the marketing culture of research libraries in Finland and to understand the awareness of the knowledge base of library management concerning modern marketing theories and practices. The study was based onthe notion that a leader in an organisation can have large impact on its culture. Therefore, it was considered important to learn about the market orientation that initiates at the top management and flows throughout the whole organisationthus resulting in a particular kind of library culture. The study attempts to examine the marketing culture of libraries by analysing the marketing attitudes, knowledge (underlying beliefs, values and assumptions), behaviour (market orientation), operational policies and activities, and their service performance (customer satisfaction). The research was based on the assumption that if the top management of libraries has market oriented behaviour, then their marketing attitudes, knowledge, operational policies and activities and service performance should also be in accordance. The dissertation attempts to connect all these theoretical threads of marketing culture. It investigates thirty three academic and special libraries in the south of Finland. The library director and three to ten customers from each library participated as respondents in this study. An integrated methodological approach of qualitative as well as quantitative methods was used to gain knowledge on the pertinent issues lying behind the marketing culture of research libraries. The analysis of the whole dissertation reveals that the concept of marketing has very varied status in the Finnish research libraries. Based on the entire findings, three kinds of marketing cultures were emerged: the strong- the high fliers; the medium- the brisk runners; and the weak- the slow walkers. The high fliers appeared to be modern marketing believers as their marketing approach was customer oriented and found to be closer to the emerging notions of contemporary relational marketing. The brisk runners were found to be traditional marketing advocates as their marketing approach is more `library centred¿than customer defined and thus is in line of `product orientation¿ i.e. traditional marketing. `Let the interested customers come to the library¿ was appeared to be the hallmark of the slow walkers. Application of conscious market orientation is not reflected in the library activities of the slow walkers. Instead their values, ideology and approach to serving the library customers is more in tuneof `usual service oriented Finnish way¿. The implication of the research is that it pays to be market oriented which results in higher customer satisfaction oflibraries. Moreover, it is emphasised that the traditional user based service philosophy of Finnish research libraries should not be abandoned but it needs to be further developed by building a relational based marketing system which will help the libraries to become more efficient and effective from the customers¿ viewpoint. The contribution of the dissertation lies in the framework showing the linkages between the critical components of the marketing culture of a library: antecedents, market orientation, facilitators and consequences. The dissertationdelineates the significant underlying dimensions of market-oriented behaviour of libraries which are namely customer philosophy, inter-functional coordination,strategic orientation, responsiveness, pricing orientation and competition orientation. The dissertation also showed the extent to which marketing attitudes, behaviour, knowledge were related and impact of market orientation on the serviceperformance of libraries. A strong positive association was found to exist between market orientation and marketing attitudes and knowledge. Moreover, it also shows that a higher market orientation is positively connected with the service performance of libraries, the ultimate result being higher customer satisfaction. The analysis shows that a genuine marketing culture represents a synthesis of certain marketing attitudes, knowledge and of selective practices. This finding is particularly significant in the sense that it manifests that marketing culture consists of a certain sets of beliefs and knowledge (which form a specific attitude towards marketing) and implementation of a certain set of activities that actually materialize the attitude of marketing into practice (market orientation) leading to superior service performance of libraries.

Competence in intensive and critical care nursing - development of a basic assessment scale for graduating nursing students

Intensive and critical care nursing is a speciality in its own right and with its own nature within the nursing profession. This speciality poses its own demands for nursing competencies. Intensive and critical care nursing is focused on severely ill patients and their significant others. The patients are comprehensively cared for, constantly monitored and their vital functions are sustained artificially. The main goal is to win time to cure the cause of the patient’s situation or illness. The purpose of this empirical study was i) to describe and define competence and competence requirements in intensive and critical care nursing, ii) to develop a basic measurement scale for competence assessment in intensive and critical care nursing for graduating nursing students, and iii) to describe and evaluate graduating nursing students’ basic competence in intensive and critical care nursing by seeking the reference basis of self-evaluated basic competence in intensive and critical care nursing from ICU nurses. However, the main focus of this study was on the outcomes of nursing education in this nursing speciality. The study was carried out in different phases: basic exploration of competence (phase 1 and 2), instrumentation of competence (phase 3) and evaluation of competence (phase 4). Phase 1 (n=130) evaluated graduating nursing students’ basic biological and physiological knowledge and skills for working in intensive and critical care with Basic Knowledge Assessment Tool version 5 (BKAT-5, Toth 2012). Phase 2 focused on defining competence in intensive and critical care nursing with the help of literature review (n=45 empirical studies) as well as competence requirements in intensive and critical care nursing with the help of experts (n=45 experts) in a Delphi study. In phase 3 the scale Intensive and Critical Care Nursing Competence Scale (ICCN-CS) was developed and tested twice (pilot test 1: n=18 students and n=12 nurses; pilot test 2: n=56 students and n=54 nurses). Finally, in phase 4, graduating nursing students’ competence was evaluated with ICCN-CS and BKAT version 7 (Toth 2012). In order to develop a valid assessment scale of competence for graduating nursing students and to evaluate and establish the competence of graduating nursing students, empirical data were retrieved at the same time from both graduating nursing students (n=139) and ICU nurses (n=431). Competence can be divided into clinical and general professional competence. It can be defined as a specific knowledge base, skill base, attitude and value base and experience base of nursing and the personal base of an intensive and critical care nurse. Personal base was excluded in this self-evaluation based scale. The ICCN-CS-1 consists of 144 items (6 sum variables). Finally, it became evident that the experience base of competence is not a suitable sum variable in holistic intensive and critical care competence scale for graduating nursing students because of their minor experience in this special nursing area. ICCN-CS-1 is a reliable and tolerably valid scale for use among graduating nursing students and ICU nurses Among students, basic competence of intensive and critical care nursing was self-rated as good by 69%, as excellent by 25% and as moderate by 6%. However, graduating nursing students’ basic biological and physiological knowledge and skills for working in intensive and critical care were poor. The students rated their clinical and professional competence as good, and their knowledge base and skill base as moderate. They gave slightly higher ratings for their knowledge base than skill base. Differences in basic competence emerged between graduating nursing students and ICU nurses. The students’ self-ratings of both their basic competence and clinical and professional competence were significantly lower than the nurses’ ratings. The students’ self-ratings of their knowledge and skill base were also statistically significantly lower than nurses’ ratings. However, both groups reported the same attitude and value base, which was excellent. The strongest factor explaining students’ conception of their competence was their experience of autonomy in nursing. Conclusions: Competence in intensive and critical care nursing is a multidimensional concept. Basic competence in intensive and critical care nursing can be measured with self-evaluation based scale but alongside should be used an objective evaluation method. Graduating nursing students’ basic competence in intensive and critical care nursing is good but their knowledge and skill base are moderate. Especially the biological and physiological knowledge base is poor. Therefore in future in intensive and critical care nursing education should be focused on both strengthening students’ biological and physiological knowledge base and on strengthening their overall skill base. Practical implications are presented for nursing education, practice and administration. In future, research should focus on education methods and contents, mentoring of clinical practice and orientation programmes as well as further development of the scale.

En gestaltning av individens erfarenhetsbaserade kunskap inom diabetesvården

The aim of this study is to form the experience-based knowledge of diabetics. The broader intent is to be able to transform this experience-based knowledge as an asset within caring. In this study, a theoretical contact for the empirical data is presented through phronesis, i.e. practical wisdom. Phronesis can be seen as the most suitable form of knowledge to be able to deepen the individual's understanding of experiencebased knowledge. For this research, hermeneutic phenomenology was chosen. Abductive reasoning was the method chosen to approach the data collected through repeated deep interviews with individuals with personal experience of diabetes and the use of insulin pumps. The abductive approach fascilitates a broader interpretation of the primary empirical results via a theory of philosophy of science, such as phronesis, the life-world and the negativity of the experience. The latent message of the empirical data is thereby also additionally highlighted. The synthesis reveals that experience-based knowledge arrives with time, it is personified and praxis-oriented, and before this time, the knowledge and security must be provided by the established care, by people close to the individual or by other external sources. The experience-based knowledge has strenghts and weaknesses. The knowledge is further categorized by the individual's ability to discern and make judgement. Additionally, the experience-based kowledge is a reflecting and action-based knowledge striving to improve the care provided. The experience-based knowledge held by the individual is potentially a great instrument towards improving general knowledge with possible practical applications within the diabetic care. Furthermost, in practical suggestions to fascilitate care. In generally applying knowledge gathered from the individual's experiental point of view, there are inherent risks. These risks could potentially be eliminated through the adoption of a concept where the established care could function as a quality guarantor. A concept taking into account the experiencebased knowledge as a source of information and knowledge in the care for diabetics. Co-created knowledge and understanding is a position found in both self-care and pump-treatment. It is also found through the optimal application of the experience-based knowledge of the individual as well as the knowledge found within the established care, in order to fascilitate well-being. This as expressed by the individual's phronesis-based knowledge.

Developing the measurement and management of knowledge: applying the constructive research approach in a knowledge intensive service environment

Intellectual assets have attained continuous attention in the academic field, as they are vital sources of competitive advantage and organizational performance in the contemporary knowledge intensive business environment. Intellectual capital measurement is quite thoroughly addressed in the accounting literature. However, the purpose of the measurement is to support the management of intellectual assets, but the reciprocal relationship between measurement and management has not been comprehensively considered in the literature. The theoretical motivation for this study rose from this paradox, as in order to maximise the effectiveness of knowledge management the two initiatives need to be closely integrated. The research approach of this interventionist case study is constructive. The objective is to develop the case organization’s knowledge management and intellectual capital measurement in a way that they would be closely integrated and the measurement would support the management of intellectual assets. The case analysis provides valuable practical considerations about the integration and related issues as the case company is a knowledge intensive organization in which the know-how of the employees is the central competitive asset and therefore, the management and measurement of knowledge are essential for its future success. The results suggest that the case organization is confronting challenges in managing knowledge. In order to appropriately manage knowledge processes and control the related risks, support from intellectual capital measurement is required. However, challenges in measuring intellectual capital, especially knowledge, could be recognized in the organization. By reflecting the knowledge management situation and the constructed strategy map, a new intellectual measurement system was developed for the case organization. The construction of the system as well as its indicators can be perceived to contribute to the literature, emphasizing of the importance of properly considering the organization’s knowledge situation in developing an intellectual capital measurement system.

Cross-cultural knowledge transfer within a multinational company

The ability to share knowledge efficiently is vital in day-to-day operations of multinational companies. Therefore, the tools for the effective knowledge sharing along with the transfer knowledge models are of a primary interest for the companies. Knowledge transfer often involves participants of different cultural background. The purpose of this research is to investigate how the cross-cultural knowledge transfer in a multinational corporation takes place and how the successful knowledge transfer is ensured. The four sub-questions will help to answer the research question. Firstly, the author will try to identify what difficulties might occur while transferring knowledge in a multicultural environment. Secondly, the cultural differences’ impact on cross-cultural communication will be explored. Thirdly, the tools and models for effective tacit knowledge transfer will be covered by the author. Lastly, the methods of assessing if a knowledge transfer was successful or not will be discussed. The focus of this thesis is on knowledge transfer within a multinational setting. A multinational corporation is used as a practical example for this study; namely the Training Centre of the multinational corporation. The study was carried out by using a qualitative research approach. The four employees of the Training Centre were interviewed in order to obtain the answers to the research questions. The complete idea of the data gathering process can be obtained by reading through the first part of the methodology section Furthermore, the matters of transferability, confirmability, trustworthiness and objectivity were discussed in the methodological section. The study indicates that in order to carry out the successful and efficient knowledge transfer several requests have to be met. Mutual motivation, e.g. the motivation of both knowledge sender and knowledge receiver is one of the most important determinants of knowledge transfer. Sufficient and bearable workload for the knowledge senders is important to ensure the quality and involvement of the knowledge sender into knowledge transfer process. Course contents, infrastructure and other matters will be discussed further on in relation of successful knowledge transfer. Influences of cultural differences on knowledge sharing were studied in this thesis. At the end of the empirical study- a model used to transfer knowledge in Training Centre will be presented. The model created proves to be functional and appropriate for transferring knowledge to representatives of different cultures.

Organisational learning and knowledge acquisition. A case study of internationalising manufacturers of wood-based prefabricated buildings

The study investigates organisational learning and knowledge acquisition of wood-based prefabricated building manufacturers. This certain group of case companies was chosen, because their management and their employees generally have a strong manufacturing and engineering background, while the housing sector is characterised by national norms, regulations, as well as local building styles. Considering this setting, it was investigated, how the case companies develop organisational learning capabilities, acquire and transfer knowledge for their internationalisation. The theoretical framework of this study constitutes the knowledge-based conceptualisation of internationalisation, which combines the traditional internationalisation process, as well as the international new venture perspective based on their commonalities in the knowledge-based view of the firm. Different theories of internationalisation, including the network-perspective, were outlined and a framework on organisational learning and knowledge acquisition was established. The empirical research followed a qualitative approach, deploying a multiple-case study with five case companies from Austria, Finland and Germany. In the study, the development of the wood-based prefabricated building industry and of the case companies are described, and the motives, facilitators and challenges for foreign expansion, as well as the companies’ internationalisation approaches are compared. Different methods of how companies facilitate the knowledge-exchange or learn about new markets are also outlined. Experience, market knowledge and personal contacts are considered essential for the internationalisation process. The major finding of the study is that it is not necessary to acquire the market knowledge internally in a slow process as proposed by the Uppsala model. In four cases companies engaged knowledge in symbiotic relations with local business partners. Thereby, the building manufacturers contribute their design and production capabilities, and in return, their local partners provide them with knowledge about the market and local regulations; while they manage the sales and construction operations. Thus, the study provides strong evidence for the propositions of network perspective. One case company developed the knowledge internally in a gradual process: it entered the market sequentially with several business lines, showing an increasing level of complexity. In both of the observed strategies, single-loop and double-loop learning processes occurred.

The analysis of knowledge retention mechanisms for leaving experts

The goal of this thesis is studying knowledge retention mechanisms used in cases of single experts’ leaving in the case company, analyzing the reason for the mechanisms choice and successfulness of knowledge retention process depending of that choice. The theoretical part discusses the origins of knowledge retention processes in the theoretical studies, the existing knowledge retention mechanisms and practical issues of their implementation. The empirical part of the study is designed as employees’ interview with later discussion of the findings. The empirical findings indicate the following reasons for knowledge retention mechanisms choice: type of knowledge retained, specialty of leaving experts and time and distance issues of a particular case. The following factors influenced the success of a retention process: choice of knowledge retention mechanisms, usage of combination of mechanisms and creation of knowledge retention plans. The results might be useful for those interested in factors influencing knowledge retention processes in cases of experts’ departure.

Reframing the relationship between service design and operations: a service engineering approach

The significance of services as business and human activities has increased dramatically throughout the world in the last three decades. Becoming a more and more competitive and efficient service provider while still being able to provide unique value opportunities for customers requires new knowledge and ideas. Part of this knowledge is created and utilized in daily activities in every service organization, but not all of it, and therefore an emerging phenomenon in the service context is information awareness. Terms like big data and Internet of things are not only modern buzz-words but they are also describing urgent requirements for a new type of competences and solutions. When the amount of information increases and the systems processing information become more efficient and intelligent, it is the human understanding and objectives that may get separated from the automated processes and technological innovations. This is an important challenge and the core driver for this dissertation: What kind of information is created, possessed and utilized in the service context, and even more importantly, what information exists but is not acknowledged or used? In this dissertation the focus is on the relationship between service design and service operations. Reframing this relationship refers to viewing the service system from the architectural perspective. The selected perspective allows analysing the relationship between design activities and operational activities as an information system while maintaining the tight connection to existing service research contributions and approaches. This type of an innovative approach is supported by research methodology that relies on design science theory. The methodological process supports the construction of a new design artifact based on existing theoretical knowledge, creation of new innovations and testing the design artifact components in real service contexts. The relationship between design and operations is analysed in the health care and social care service systems. The existing contributions in service research tend to abstract services and service systems as value creation, working or interactive systems. This dissertation adds an important information processing system perspective to the research. The main contribution focuses on the following argument: Only part of the service information system is automated and computerized, whereas a significant part of information processing is embedded in human activities, communication and ad-hoc reactions. The results indicate that the relationship between service design and service operations is more complex and dynamic than the existing scientific and managerial models tend to view it. Both activities create, utilize, mix and share information, making service information management a necessary but relatively unknown managerial task. On the architectural level, service system -specific elements seem to disappear, but access to more general information elements and processes can be found. While this dissertation focuses on conceptual-level design artifact construction, the results provide also very practical implications for service providers. Personal, visual and hidden activities of service, and more importantly all changes that take place in any service system have also an information dimension. Making this information dimension visual and prioritizing the processed information based on service dimensions is likely to provide new opportunities to increase activities and provide a new type of service potential for customers.