Äitiys kulttuurisina odotuksina

Tutkimuksen kohteena ovat äitiydelle tuotetut kulttuuriset odotukset, joita tarkastellaan kahdella yhteiskunnallisella keskustelufoorumilla. Tutkimuksessa tarkastellaan yhtäältä lastensuojelun perhetyössä toimivien ammattilaisten ja toisaalta median puhetta äitiydestä. Tutkimuksen tavoitteena on tehdä näkyväksi vaihtoehtoisia tapoja konstruoida äitiyttä hyvänä tai riittämättömänä sekä haastaa pohtimaan erilaisten tulkintojen perusteita ja seurauksia lastensuojelutyössä. Kulttuuriset, äitiyttä koskevat odotukset vaikuttavat myös siihen, miten äitiys henkilökohtaisella tasolla koetaan. Äitiyden kulttuurista määrittelyä analysoidaan kahdesta tekstiaineistosta. Yhtenä aineistona ovat Stakesissa vuonna 1999 toteutetun Perhetyöprojektin yhteydessä kerätyt, lastensuojelussa toimivien perhetyöammattilaisten ryhmäkeskustelut. Toisena aineistona on projektin ajankohtana ilmestyneistä suomalaisista naisten- ja perhelehdistä (Kotiliesi, Anna, Kaksplus) kerätyt äitien haastattelut. Tutkimuksessa kysytään 1) Mihin ammattilaisten äitejä koskeva huolipuhe kiinnittyy ja millaisia kulttuurisia äitiyden odotuksia se konstruoi? 2) Millaisia äitiyden odotuksia median äitihaastattelut konstruoivat? 3) Millaisen äitiyden odotushorisontin nämä puhekäytännöt yhdessä tuottavat? Analyysin teoreettis-metodologisina kulmakivinä ovat sosiaalinen konstruktionismi ja feministinen tietokäsitys. Analyysimenetelmänä on laadullinen, aineistojen ehdoilla etenevä, feministisesti ja kriittisesti sävyttynyt lukutapa, joka hyödyntää teemoittelun, diskurssianalyysin ja feministisen metodologian ideoita ja käsitteitä. Analysoitavana olevissa keskusteluissa äitiyttä konstruoidaan lapsen tarpeiden (ammattilaiset) ja naisen tarpeiden (media) näkökulmista. Ammattilaiset puhuvat tilanteista, joissa äitien toiminta rikkoo kulttuurista hyvän äidin kuvaa, vaarantaa lapsen hyvinvointia ja äitiyteen joudutaan puuttumaan ammatillisesti. Ammattilaisten tulkinnat kuvaavat taitavaa lapsen edun näkökulmasta tehtyä arviointia, jonka kiintopisteenä ovat äidit yksilöllisine ominaisuuksineen ja piirteineen. Ammatillisen huolipuheen keskiössä ovat äidin vuorovaikutussuhteet sekä äidin tunteet, käyttäytyminen ja asenteet. Riittävää äitiyttä konstruoi kodin luominen, kiintymyssuhteen rakentaminen ja lapsen ensisijaiseksi asettaminen. Sen sijaan vaikuttaa siltä, ettei äitiyden arviointia juurikaan tehdä suhteessa äidin muihin identiteetteihin tai äitiyden toteuttamisen kontekstiin. Paikoin ammattilaisten tulkinnat heijastavat myös stereotyyppisiä ja idealistisia odotuksia, joita vasten äitiyttä arvioidaan. Tällaiset piirteet voivat kertoa siitä, että äitien avuntarpeet jäävät lastensuojelutyössä kohtaamatta ja ymmärtämättä. Mediapuhe äitiydestä käydään naiseuden ja äitiyden mallien antamisen kontekstissa. Puheen keskiössä ovat mediajulkisuuteen päässeiden naisten äidiksi tuloon ja äitiyden toteuttamiseen liittyvät valinnat ja käyttäytyminen. Mediapuhe on puhetta kulttuuristen ja ammatillisten äitiyden odotusten rikkomisesta, uudelleen tulkinnasta ja niiden muovaamisesta itselle sopiviksi. Mediapuheessa hyvää äitiyttä konstruoi äidin itsenäisyys ja oma aika, sosiaalisen elämän rikkaus, ammatillinen identiteetti ja persoonalliset valinnat. Aineistojen kautta rakentuu moninaisten ja ristiriitaisten, äitejä eri suuntaan vetävien kulttuuristen odotusten kirjo. Odotukset jäsentyvät neljälle ulottuvuudelle: 1) lapselle omistautuva – itseään toteuttava, 2) emotionaalinen side – rationaalinen tehtävä, 3) odotuksia toteuttava – omaehtoinen, 4) itsenäinen - äitiyttä jakava. Äitiyden toteuttaminen kulttuurisesti ”oikein” on näiden odotusten välissä tasapainoilua. Ulottuvuuksien kautta esille tulevat kaksoisviestit voivat heikentää äitien itsetuntoa, tuottaa riittämättömyyden tunteita tai yllyttää suorittamaan äitiyttä. Myös äitiyden ammatillinen tukeminen edellyttää tasapainoilua, jottei äitejä idealisoida tai syyllistetä kulttuurisia odotuksia vasten.

Venäläisten yritysten kansainvälistyminen

Tämän kandidaatintyön tavoitteena on selvittää ja analysoida venäläisten yritysten kansainvälistymistä investointien näkökulmasta. Aihetta tutkittiin Venäjältä ulospäin suuntautuneiden investointien valossa. Kansainvälistymistä analysoitiin konkreettisten yritysesimerkkien kautta. Työssä käytettiin lähteinä aikaisempia aiheesta tehtyjä tutkimuksia sekä esimerkkeinä olevien yritysten internetsivuja. Venäläisten yritysten kansainvälistyminen alkoi toden teolla vasta Neuvostoliiton hajoamisen jälkeen. Käytännössä yritysten kansainvälistyminen on lähtenyt kasvuun vasta 2000-luvulla. Viime vuosien aikana Venäjä on ollut yksi suurimmista ulospäin investoijista nousevien markkinatalouksien joukossa. Suurimmat Venäjältä ulospäin investoijat toimivat öljy- ja kaasuteollisuudessa sekä metalli- ja kaivosteollisuudessa. Kyseiset teollisuudenalat ovat riippuvaisia raaka-aineiden maailmanmarkkinahinnoista. Vuoden 2008 lopulla alkanut talouskriisi on alentanut raaka-aineiden hintoja ja näin vaikuttanut yritysten toimintaan. Yritykset ovat joutuneet talousvaikeuksiin, joka on vaikuttanut myös niiden investointeihin ulkomaille. Tällä hetkellä Venäjä on riippuvainen luonnonvaroihin perustuvista teollisuudenaloista, mutta tulevaisuudessa uusilla yrityksillä on mahdollisuuksia nousta kansainvälisien yritysten joukkoon. Raaka-aineiden hintojen kääntyessä jälleen nousuun myös luonnonvaroihin perustuvat yritykset tulevat nousemaan ahdingosta ja jatkamaan kansainvälistymistä.

Research of wood fuel market in Ukraine and the Republic of Belarus

The goal of the present work was to describe the wood fuel market of Ukraine and the Republic of Belarus, to estimate wood fuel potential and to research opportunities of wood fuel trading. Nowadays the wood waste, wood residues and by-products are becoming more and more potential raw materials for energy production. Against the background of unstable prices of traditional energy sources and environmental degradation, European States are planning to get 12% of energy from alternative sources already in 2010. Wastes of wood-working and agricultural productions are such sources. At present time the most popular wood biofuels are wood pellets, briquettes, wood chips and logs. Ukraine and the Republic of Belarus have a rather big potential of wood fuel resources. But wood fuels markets of these countries are on the entry level and quite disorganized. There is almost no domestic usage of wood biofuel. All produced pellets, briquettes as well as wood chips and logs go to the export, but the volumes are not high at present time. Ukraine and the Republic of Belarus have a very suitable geographical location. The most promising directions of wood fuel trading are developed wood fuel markets of Northern countries, Austria, Germany as well as actively developing markets of Poland and Hungary. At the long distance truck and sea transportation are the most appropriate. At a short distance cheap transportation by rail is more suitable. Thereby export is a potential opportunity for development of wood fuel production and in the future for usage in the researched countries.

Fate of peat utilization

Peat is an organic substance with the maintenance of a mineral part, what shows it as interesting object for studying. Both organic and mineral parts of peat find application in various fields of activity of the people. Antibacterial properties of peat are known since an antiquity. Today people have expanded a spectrum of application of peat to use of by-products of its processing for reception of rather ecologically harmless fuel. The master theses are focused on peat, as on ambiguous raw materials for processing and fuel manufacture. The purpose of theses to show how much widely applied peat, technologies on its processing and its influence on environment at all stages of its working out.

Building the map of innovation for membrane materials (Ceramic membranes)

This work proposes a method of visualizing the trend of research in the field of ceramic membranes from 1999 to 2006. The presented approach involves identifying problems encountered during research in the field of ceramic membranes. Patents from US patent database and articles from Science Direct(& by ELSEVIER was analyzed for this work. The identification of problems was achieved with software Knowledgist which focuses on the semantic nature of a sentence to generate series of subject action object structures. The identified problems are classified into major research issues. This classification was used for the visualization of the intensity of research. The image produced gives the relation between the number of patents, with time and the major research issues. The identification of the most cited papers which strongly influence the research of the previously identified major issues in the given field was also carried out. The relations between these papers are presented using the metaphor of social network. The final result of this work are two figures, a diagram showing the change in the studied problems a specified period of time and a figure showing the relations between the major papers and groups of the problems

Toiminnanohjausjärjestelmän laajentaminen tuotannonohjaukseen

Diplomityössä perehdytään rakennustuotteita valmistavan teollisuusyrityksen toiminnanohjausjärjestelmän laajentamiseen tuotannonohjaukseen. Järjestelmä on tällä hetkel-lä valjastettu vain hallinnolliseen käyttöön, eli tarjouspyyntöjen ja myyntitilauksien kirjaamiseen, laskutukseen ja reskontraan. Järjestelmän laajentamista tuotantoon puoltaa hankalasti ennustettavat toimitusajat ja kapasiteetin käyttöasteen hahmotettavuus. Laajentaminen on määrä toteuttaa vaiheittain, ensimmäisenä yrityksen suurimman liikevaihdon tekevällä osastolla. Diplomityön ensimmäinen tavoite oli selvittää teoriaosuuden avulla toiminnanohjausjärjestelmään liittyvät keskeiset asiat, joiden pohjalta laajentamista alettiin suunnitella. Lisäksi selvitettiin toiminnanohjausjärjestelmien käyttöönottojen epäonnistumisiin johtaneita syitä. Suurimmiksi syiksi on havaittu epärealistiset odotukset, projektin jättäminen vain atk-osaston huoleksi sekä johdon tuen puuttu-minen. Toisessa vaiheessa tavoitteena oli laatia suunnitelma, jonka perusteella laajentaminen on tarkoitus tehdä yrityksen ensimmäisellä käyttöönotto-osastolla. Tärkeimmät huomioitavat seikat ovat kuormitusryhmien suunnittelu, kuormitusryhmien sisäiset kuormituspisteet ja tuotteiden valmistusrakenteen järkevä määrittäminen toiminnanohjausjärjestelmään. Case-yrityksessä huomioitavaa oli myös työajanseurantalaitteiston hankinta, joka palvelee samalla toiminnanohjausjärjestelmää työmääräinten kuittaamisessa integroinnin jälkeen. Kolmas vaihe oli tehdä työn perusteella suositukset jatkotoimenpiteille. Järjestelmän toimiessa suunnitellusti ensimmäisellä osastolla, aletaan projektia viedä muille osastoille. Lisäksi suositellaan toiminnanohjausjärjestelmän laajentamista varastoihin sekä ostoihin, jotta materiaalinkulutuksesta saadaan mahdollisimman paljon tietoa.

Asbestin tunnistaminen keinonenällä

Asbesti on yleisnimike kuitumaisille silikaattimineraaleille. Sillä on monia hyviä ominaisuuksia. Siksi sitä on käytetty useisiin eri käyttötarkoituksiin jo yli 4 000 vuoden ajan. Sisäänhengitettynä asbesti aiheuttaa kuitenkin vakavia terveyshaittoja, mm. asbestoosia, keuhkosyöpää ja mesotelioomaa. Vuosina 1918-1988 Suomessa käytettiin asbestia 300 000 tonnia. Yleisintä käyttö oli 1960-70-lukujen vaihteessa. Sairauksien viive altistumisesta on 10-40 vuotta. Sairauksien esiintyminen onkin nyt suurimmillaan. Suurin osa sairauksista on hyvänlaatuisia keuhkopussin paksuuntumia eli plakkeja. Vuosittain asbestin aiheuttamiin sairauksiin, etupäässä syöpiin, kuolee Suomessa noin 100 ihmistä. Yhteensä altistuneita arvellaan olevan 250 000. Heistä elossa on noin 50 000. Vaarallisuutensa vuoksi asbestin käyttö on useissa maissa kielletty, mutta maailmalla sitä käytetään edelleen suuria määriä. Suomessa asbestin käyttöä rajoitettiin jo 1970-luvulla. Pieniä poikkeuksia lukuun ottamatta täyskielto tuli voimaan 1.1.1994. Suomessa asbestia esiintyy edelleen vanhoissa rakennuksissa. Asbestipurkutyö on luvanvaraista. Asbestitöissä on huolehdittava siitä, että kukaan ei altistu asbestille. Asbestipitoisen materiaalin tunnistaminen silmämääräisesti on vaikeaa. Materiaali luokitellaan asbestipitoiseksi, jos siinä on asbestia yli 1 painoprosenttia tai jos sitä voidaan pölyävyytensä takia pitää vaarallisena. Asbestipitoisen materiaalin kartoituksessa voidaan käyttää rakennussuunnitelmia, vanhoja asiakirjoja kuten urakoitsijan laskuja sekä tuntemusta rakennusajan yleisistä rakennustavoista. Varmuus saadaan kuitenkin vain tutkimalla materiaali esimerkiksi laboratoriokokeissa. Tässä diplomityössä on pyritty selvittämään, voidaanko asbesti tunnistaa ChemPro 100 -keinonenällä. Laite perustuu ioniliikkuvuusspektrometriaan eli eri yhdisteiden erilaiseen liikkuvuuteen kaasumaisessa väliaineessa. Menetelmä on nopea ja yksinkertainen. Tutkimusta varten hankittiin asbestipitoisia materiaaleja, joista saatuja tuloksia vertailtiin toisiinsa. Nykyiset asbestintunnistusmenetelmät ovat monimutkaisia ja hitaita. Jos keinonenä pystyttäisiin kouluttamaan tunnistamaan asbestimateriaali, helpottaisi se asbestikartoituksen tekemistä.

Mobile system for pump working point estimation

In the current economy situation companies try to reduce their expenses. One of the solutions is to improve the energy efficiency of the processes. It is known that the energy consumption of pumping applications range from 20 up to 50% of the energy usage in the certain industrial plants operations. Some studies have shown that 30% to 50% of energy consumed by pump systems could be saved by changing the pump or the flow control method. The aim of this thesis is to create a mobile measurement system that can calculate a working point position of a pump drive. This information can be used to determine the efficiency of the pump drive operation and to develop a solution to bring pump’s efficiency to a maximum possible value. This can allow a great reduction in the pump drive’s life cycle cost. In the first part of the thesis, a brief introduction in the details of pump drive operation is given. Methods that can be used in the project are presented. Later, the review of available platforms for the project implementation is given. In the second part of the thesis, components of the project are presented. Detailed description for each created component is given. Finally, results of laboratory tests are presented. Acquired results are compared and analyzed. In addition, the operation of created system is analyzed and suggestions for the future development are given.

Insulation System in an Integrated Motor Compressor

A high-speed and high-voltage solid-rotor induction machine provides beneficial features for natural gas compressor technology. The mechanical robustness of the machine enables its use in an integrated motor-compressor. The technology uses a centrifugal compressor, which is mounted on the same shaft with the high-speed electrical machine driving it. No gearbox is needed as the speed is determined by the frequency converter. The cooling is provided by the process gas, which flows through the motor and is capable of transferring the heat away from the motor. The technology has been used in the compressors in the natural gas supply chain in the central Europe. New areas of application include natural gas compressors working at the wellheads of the subsea gas reservoir. A key challenge for the design of such a motor is the resistance of the stator insulation to the raw natural gas from the well. The gas contains water and heavy hydrocarbon compounds and it is far harsher than the sales gas in the natural gas supply network. The objective of this doctoral thesis is to discuss the resistance of the insulation to the raw natural gas and the phenomena degrading the insulation. The presence of partial discharges is analyzed in this doctoral dissertation. The breakdown voltage of the gas is measured as a function of pressure and gap distance. The partial discharge activity is measured on small samples representing the windings of the machine. The electrical field behavior is also modeled by finite element methods. Based on the measurements it has been concluded that the discharges are expected to disappear at gas pressures above 4 – 5 bar. The disappearance of discharges is caused by the breakdown strength of the gas, which increases as the pressure increases. Based on the finite element analysis, the physical length of a discharge seen in the PD measurements at atmospheric pressure was approximated to be 40 – 120 m. The chemical aging of the insulation when exposed to raw natural gas is discussed based on a vast set of experimental tests with the gas mixture representing the real gas mixture at the wellhead. The mixture was created by mixing dry hydrocarbon gas, heavy hydrocarbon compounds, monoethylene glycol, and water. The mixture was chosen to be more aggressive by increasing the amount of liquid substances. Furthermore, the temperature and pressure were increased, which resulted in accelerated test conditions. The time required to detect severe degradation was thus decreased. The test program included a comparison of materials, an analysis of the e ects of di erent compounds in the gas mixture, namely water and heavy hydrocarbons, on the aging, an analysis of the e ects of temperature and exposure duration, and also an analysis on the e ect of sudden pressure changes on the degradation of the insulating materials. It was found in the tests that an insulation consisting of mica, glass, and epoxy resin can tolerate the raw natural gas, but it experiences some degradation. The key material in the composite insulation is the resin, which largely defines the performance of the insulation system. The degradation of the insulation is mostly determined by the amount of gas mixture di used into it. The di usion was seen to follow Fick’s second law, but the coe cients were not accurately defined. The di usion was not sensitive to temperature, but it was dependent upon the thermodynamic state of the gas mixture, in other words, the amounts of liquid components in the gas. The weight increase observed was mostly related to heavy hydrocarbon compounds, which act as plasticizers in the epoxy resin. The di usion of these compounds is determined by the crosslink density of the resin. Water causes slight changes in the chemical structure, but these changes do not significantly contribute to the aging phenomena. Sudden changes in pressure can lead to severe damages in the insulation, because the motion of the di used gas is able to create internal cracks in the insulation. Therefore, the di usion only reduces the mechanical strength of the insulation, but the ultimate breakdown can potentially be caused by a sudden drop in the pressure of the process gas.

Crystallization characteristics of bioactive glasses

Bioactive glasses are excellent candidates for implant materials, because they can form a chemical bond to bone or guide bone growth, depending on the glass composition. Some compositions have even shown soft tissue attachment and antimicrobial effects. So far, most clinical applications are based on monoliths, plates and particulates of different grain sizes. There is a growing interest in special products such as porous implants sintered from microspheres and fibers drawn from preforms or glass melts. The viscosity range at which these are formed coincides with the crystallization temperature range for most bioactive glasses, thus complicating the manufacturing process. In this work, the crystallization tendency and its kinetics for a series of glasses with their compositions within the range of bioactivity were investigated. The factors affecting crystallization and how it is related to composition were studied by means of thermal analysis and hot stage microscopy. The crystal compositions formed during isothermal and non-isothermal heat treatments were analyzed with SEM-EDXA and X-ray diffraction analysis. The temperatures at which sintering and fiber drawing can take place without interfering with crystallization were determined and glass compositions which are suitable for these purposes were established. The bioactivity of glass fibers and partly crystallized glass plates was studied by soaking them in simulated body fluid (SBF). The thickness of silica, calcium and phosphate rich reaction layers on the glass surface after soaking was used as an indication of the bioactivity. The results indicated that the crystallization tendencies of the experimental glasses are strongly dependent on composition. The main factor affecting the crystallization was found to be the alkali oxide content: the higher the alkali oxide content the lower the crystallization temperature. The primary crystalline phase formed at low temperatures in these glasses was sodium calcium silicate. The crystals were found to form through internal nucleation, leading to bulk crystallization. These glasses had high bioactivity in vitro. Even when partially crystalline, they formed typical reaction layers, indicating bioactivity. In fact, sodium calcium silicate crystals were shown to transform in vitro into hydroxyapatite during soaking. However, crystallization should be avoided because it was shown to retard dissolution, bioactivity reactions and complicate fiber drawing process. Glass compositions having low alkali oxide content showed formation of wollastonite crystals on the surface, at about 300°C above the glass transition temperature. The wide range between glass transition and crystallization allowed viscous flow sintering of these compositions. These glasses also withstood the thermal treatments required for fiber drawing processing. Precipitation of calcium and phosphate on fibers of these glasses in SBF suggested that they were osteoconductive. Glasses showing bioactivity crystallize easily, making their hot working challenging. Undesired crystallization can be avoided by choosing suitable compositions and heat treatment parameters, allowing desired product forms to be attained. Small changes in the oxide composition of the glass can have large effects and therefore a thorough understanding of glass crystallization behavior is a necessity for a successful outcome, when designing and manufacturing implants containing bioactive glasses.

Elemental analysis of wood materials by external millibeam thick target PIXE

PIXE (Particle Induce X-ray Emission spectrometry) was used for analysing stem bark and stem wood of Scots pine, Norway spruce and Silver birch. Thick samples were irradiated, in laboratory atmosphere, with 3 MeV protons and the beam current was measured indirectly using a photo multiplicator (PM) tube. Both point scans and bulk analyses were performed with the 1 mm diameter proton beam. In bulk analyses, whole bark and sectors of discs of the stem wood were dry ashed at 550 ˚C. The ashes were homogenised by shaking and prepared to target pellets for PIXE analyses. This procedure generated representative samples to be analysed, but the enrichment also enabled quantification of some additional trace elements. The ash contents obtained as a product of the sample preparation procedure also showed to be of great importance in the evaluation of results in environmental studies. Spot scans from the pith of pine wood outwards, showed clearly highest concentrations of manganese, calcium and zinc in the first spot irradiated, or 2-3 times higher than in the surrounding wood. For stem wood from the crown part of a pine this higher concentration level was found in the first four spots/mms, including the pith and the two following growth rings. Zinc showed increasing concentrations outwards in sapwood of the pine stem, with the over-all lowest concentrations in the inner half of the sapwood. This could indicate emigration of this element from sapwood being under transformation to heartwood. Point scans across sapwood of pine and spruce showed more distinct variations in concentrations relative to hearth wood. Higher concentrations of e.g. zinc, calcium and manganese were found in earlywood than in denser latewood. Very high concentrations of iron and copper were also seen for some earlywood increments. The ash content of stem bark is up to and order higher than for the stem wood. However, when the elemental concentration in ashes of bark and wood of the same disc were compared, these are very similar – this when trees are growing at spots with no anthropogenic contamination from the atmosphere. The largest difference was obtained for calcium which appeared at two times high concentrations in ashes of bark than in ashes of the wood (ratio of 2). Pine bark is often used in monitoring of atmospheric pollution, where concentrations in bark samples are compared. Here an alternative approach is suggested: Bark and the underlying stem wood of a pine trees are dry ashed and analysed. The elemental concentration in the bark ash is then compared to the concentration of the same element in the wood ash. Comparing bark to wood includes a normalisation for the varying availability of an element from the soil at different sites. When this comparison is done for the ashes of the materials, a normalisation is also obtained for the general and locally different enrichment of inorganic elements from wood to bark. Already a ratio >2 between the concentration in the bark ash and the concentration in the wood ash could indicate atmospheric pollution. For monitoring where bark is used, this way of “inwards” comparison is suggested - instead of comparing to results from analyses of bark from other trees (read reference areas), growing at sites with different soil and, locally, different climate conditions. This approach also enables evaluation of atmospheric pollution from sampling of only relative few individual trees –preferable during forest felling.

Soldiering and the making of Finnish manhood : conscription and masculinity in interwar Finland, 1918–1939

Military conscription and peacetime military service were the subjects of heated political, social and cultural controversies during the early years of national independence in Finland. Both the critics and the supporters of the existing military system described it as strongly formative of young men’s physical and moral development into adult men and male citizens. The conflicts over conscription prompted the contemporaries to express their notions about what Finnish men were like, at their best and at their worst, and what should and could be done about it. This thesis studies military conscription as an arena for the “making of manhood” in peacetime Finnish society, 1918–1939. It examines a range of public images of conscripted soldiering, asking how soldiering was depicted and given gendered meanings in parliamentary debates, war hero myths, texts concerned with the military and civic education of conscripts, as well as in works of fiction and reminiscences about military training as a personal experience. Studying conscription with a focus on masculinity, the thesis explores the different cultural images of manliness, soldiering and male citizenship on offer in Finnish society. It investigates how political parties, officers, educators, journalists, writers and “ordinary” conscripts used and developed, embraced or rejected these notions, according to their political purposes or personal needs. The period between the two world wars can be described as a fast-forward into military modernity in Finland. In the process, European middle class gender ideologies clashed with Finnish agrarian masculinities. Nationalistic agendas for the militarisation of Finnish manhood stumbled against intense class conflicts and ideological resistance. Military propaganda used images of military heroism, civic virtue and individual success to persuade the conscripts into ways of thinking and acting that were shaped by bourgeois mentality, nationalistic ideology and religious morality. These images are further analysed as expressive of the personal experiences and emotions of their middle-aged, male authors. The efforts of these military educators were, however, actively resisted on many fronts, ranging from rural working class masculinities among the conscripted young men to ideological critiques of the standing army system in parliament. In narratives about military training, masculinity was depicted as both strengthened and contradicted by the harsh and even brutal practices of interwar Finnish military training. The study represents a combination of new military history and the historical study of men and masculinities. It approaches masculinity as a contested and highly political form of social and cultural knowledge that is actively and selectively used by historic actors. Instead of trying to identify a dominant or “hegemonic” form of masculinity within a pre-determined theoretical structure, this study examines how the meanings ascribed to manhood varied according to class, age, political ideology and social situation. The interwar period in Finland can be understood as a period of contest between different notions of militarised masculinity, yet to judge by the materials studied, there was no clear winning party in that contest. A gradual movement from an atmosphere of conflict surrounding conscription towards political and cultural compromises can be discerned, yet this convergence was incomplete and many division lines remained.

Working Capital Management: a Bibliometric Study

This thesis is a study of articles published in scientific journals about working capital management using bibliometric methods. The study was restricted to articles published in 1990–2010 that deal with the whole working capital management topic not a single sub-area of it. Working capital is defined as current assets minus current liabilities; sometimes also a definition of inventory plus accounts receivable minus accounts payable is used. The data was retrieved from the databases ISI Web of Science and Sciverse Scopus. Articles about working capital management were found 23. Content analysis, statistical analysis and citation analysis was performed to the articles. The most cited articles found in citation analysis were also analyzed by nearly same methods. This study found that scientific research of working capital management seems not to be concentrated to specific persons, organizations or journals. The originality and novelty in many articles is low. Many articles studied relation between working capital management and profitability in firms or working capital management practices of firms using statistical analyses. Data in articles was firms of all sizes, except in developing economies only big firms were used. Interesting areas for future research could be surveys made about working capital management practices in firms, finding of best practices, tools for working capital management, inventing or improving alternative views to working capital management like process-oriented view and firm or industry specific studies.