The Impact of European Macroeconomic News Announcements on CIVETS Stock Markets

The purpose of this research is to investigate how CIVETS (Colombia, Indonesia, Vietnam, Egypt, Turkey and South Africa) stock markets are integrated with Europe as measured by the impact of euro area (EA) scheduled macroeconomic news announcements, which are related to macroeconomic indicators that are commonly used to indicate the direction of the economy. Macroeconomic announcements used in this study can be divided into four categories; (1) prices, (2) real economy, (3) money supply and (4) business climate and consumer confidence. The data set consists of daily market data from CIVETS and scheduled macroeconomic announcements from the EA for the years 2007-2012. The econometric model used in this research is Exponential Generalized Autoregressive Conditional Heteroscedasticity (EGARCH). Empirical results show diverse impacts of macroeconomic news releases and surprises for different categories of news supporting the perception of heterogeneity among CIVETS. The analyses revealed that in general EA macroeconomic news releases and surprises affect stock market volatility in CIVETS and only in some cases asset pricing. In conclusion, all CIVETS stock markets reacted to the incoming EA macroeconomic news suggesting market integration to some extent. Thus, EA should be considered as a possible risk factor when investing in CIVETS.

Identification of Some Additional Loss Components in High-Power Low-Voltage Permanent Magnet Generators

Permanent magnet generators (PMG) represent the cutting edge technology in modern wind mills. The efficiency remains high (over 90%) at partial loads. To improve the machine efficiency even further, every aspect of machine losses has to be analyzed. Additional losses are often given as a certain percentage without providing any detailed information about the actual calculation process; meanwhile, there are many design-dependent losses that have an effect on the total amount of additional losses and that have to be taken into consideration. Additional losses are most often eddy current losses in different parts of the machine. These losses are usually difficult to calculate in the design process. In this doctoral thesis, some additional losses are identified and modeled. Further, suggestions on how to minimize the losses are given. Iron losses can differ significantly between the measured no-load values and the loss values under load. In addition, with embedded magnet rotors, the quadrature-axis armature reaction adds losses to the stator iron by manipulating the harmonic content of the flux. It was, therefore, re-evaluated that in salient pole machines, to minimize the losses and the loss difference between the no-load and load operation, the flux density has to be kept below 1.5 T in the stator yoke, which is the traditional guideline for machine designers. Eddy current losses may occur in the end-winding area and in the support structure of the machine, that is, in the finger plate and the clamping ring. With construction steel, these losses account for 0.08% of the input power of the machine. These losses can be reduced almost to zero by using nonmagnetic stainless steel. In addition, the machine housing may be subjected to eddy current losses if the flux density exceeds 1.5 T in the stator yoke. Winding losses can rise rapidly when high frequencies and 10–15 mm high conductors are used. In general, minimizing the winding losses is simple. For example, it can be done by dividing the conductor into transposed subconductors. However, this comes with the expense of an increase in the DC resistance. In the doctoral thesis, a new method is presented to minimize the winding losses by applying a litz wire with noninsulated strands. The construction is the same as in a normal litz wire but the insulation between the subconductors has been left out. The idea is that the connection is kept weak to prevent harmful eddy currents from flowing. Moreover, the analytical solution for calculating the AC resistance factor of the litz-wire is supplemented by including an end-winding resistance in the analytical solution. A simple measurement device is developed to measure the AC resistance in the windings. In the case of a litz-wire with originally noninsulated strands, vacuum pressure impregnation (VPI) is used to insulate the subconductors. In one of the two cases studied, the VPI affected the AC resistance factor, but in the other case, it did not have any effect. However, more research is needed to determine the effect of the VPI on litz-wire with noninsulated strands. An empirical model is developed to calculate the AC resistance factor of a single-layer formwound winding. The model includes the end-winding length and the number of strands and turns. The end winding includes the circulating current (eddy currents that are traveling through the whole winding between parallel strands) and the main current. The end-winding length also affects the total AC resistance factor.

Identification of research trends in the field of separation processes. Application of epidemiological model, citation analysis, text mining, and technical analysis of the financial markets

Choice of industrial development options and the relevant allocation of the research funds become more and more difficult because of the increasing R&D costs and pressure for shorter development period. Forecast of the research progress is based on the analysis of the publications activity in the field of interest as well as on the dynamics of its change. Moreover, allocation of funds is hindered by exponential growth in the number of publications and patents. Thematic clusters become more and more difficult to identify, and their evolution hard to follow. The existing approaches of research field structuring and identification of its development are very limited. They do not identify the thematic clusters with adequate precision while the identified trends are often ambiguous. Therefore, there is a clear need to develop methods and tools, which are able to identify developing fields of research. The main objective of this Thesis is to develop tools and methods helping in the identification of the promising research topics in the field of separation processes. Two structuring methods as well as three approaches for identification of the development trends have been proposed. The proposed methods have been applied to the analysis of the research on distillation and filtration. The results show that the developed methods are universal and could be used to study of the various fields of research. The identified thematic clusters and the forecasted trends of their development have been confirmed in almost all tested cases. It proves the universality of the proposed methods. The results allow for identification of the fast-growing scientific fields as well as the topics characterized by stagnant or diminishing research activity.

Automatic image-based identification of Saimaa ringed seals

The Saimaa ringed seal is one of the most endangered seals in the world. It is a symbol of Lake Saimaa and a lot of effort have been applied to save it. Traditional methods of seal monitoring include capturing the animals and installing sensors on their bodies. These invasive methods for identifying can be painful and affect the behavior of the animals. Automatic identification of seals using computer vision provides a more humane method for the monitoring. This Master's thesis focuses on automatic image-based identification of the Saimaa ringed seals. This consists of detection and segmentation of a seal in an image, analysis of its ring patterns, and identification of the detected seal based on the features of the ring patterns. The proposed algorithm is evaluated with a dataset of 131 individual seals. Based on the experiments with 363 images, 81\% of the images were successfully segmented automatically. Furthermore, a new approach for interactive identification of Saimaa ringed seals is proposed. The results of this research are a starting point for future research in the topic of seal photo-identification.

Identification of characteristics for successful university-company partnership development

The importance of university-company collaboration has increased during the last decades. The drivers for that are, on the one hand, changes in business logic of companies and on the other hand the decreased state funding of universities. Many companies emphasize joint research with universities as an enabling input to their development processes, which aim at creating new innovations, products and wealth. These factors have changed universities’ operations and they have adopted several practices of dynamic business organizations, such as strategic planning, monitoring and controlling methods of internal processes etc. The objective of this thesis is to combine different characteristics of successful university-company partnership and its development. The development process starts with identifying potential partners in the university’s interest group, which requires understanding the role of different partners in the innovation system. Next, in order to find a common development basis, matching the policy and strategy between partners is needed. The third phase is to combine the academic and industrial objectives of a joint project, which is a typical form of university-company collaboration. The optimum is a win-win situation where both partners, universities and companies, can get addedvalue. For the companies added value typically means access to new research results before their competitors. For the universities added value offers a possibility to carry on high level scientific work. The research output in the form of published scientific articles is evaluated by the international science community. Because the university-company partnership is often executed by joint projects, the different forms of this kind of projects is discussed in this study. The most challenging form of collaboration is a semi-open project model, which is not based on bilateral activities between universities and companies but on a consortium of several universities, research institutes and companies. The universities and companies are core actors in the innovation system. Thus the discussion of their roles and relations to public operators like publicly funded financiers is important. In the Finnish innovation system there are at least the following doers executing strategies and policies: EU, Academy of Finland and TEKES. In addition to these, Strategic Centres for Science, Technology and Innovation which are owned jointly by companies, universities and research organizations have a very important role in their fields of business. They transfer research results into commercial actions to generate wealth. The thesis comprises two parts. The first part consists of an overview of the study including introduction, literature review, research design, synthesis of findings and conclusions. The second part introduces four original research publications.

Competence foresight: linking the identification of HR competences and competence management alignment with business strategy

The objective of this study was to increase understanding of the link between the identification of required HR competences and competence management alignment with business strategy in a Finnish, global company employing over 8,000 people and about 100 HR professionals. This aim was approached by analyzing the data collected in focus group interviews using a grounded theory method and in parallel reviewing the literature of strategic human resource management, competence-based strategic management, strategy and foresight. The literature on competence management in different contexts dismisses in-depth discussions on the foresight process and individuals are often forgotten in strategic frameworks. However, corporate foresight helps in the detection of emerging opportunities for innovations and in the implementation of strategy. The empirical findings indicate a lack of strategic leadership and an alignment with HR and business. Accordingly, the most important HR competence areas identified were the need for increasing business understanding and enabling change. As a result, the study provided a holistic model for competence foresight, which introduces HR professionals as strategic change agents in the role of organizational futurists at the heart of the company: facilitating competence foresight and competence development on individual as well as organizational levels, resulting in an agile organization with increased business understanding, sensitive sensors and adaptive actions to enable change.

The Performance of European Small Cap Equity Funds

The thesis examines the risk-adjusted performance of European small cap equity funds between 2008 and 2013. The performance is measured using several measures including Sharpe ratio, Treynor ratio, Modigliani measure, Jensen alpha, 3-factor alpha and 4-factor alpha. The thesis also addresses the issue of persistence in mutual fund performance. Thirdly, the relationship between the activity of fund managers and fund performance is investigated. The managerial activity is measured using tracking error and R-squared obtained from a 4-factor asset pricing model. The issues are investigated using Spearman rank correlation test, cross-sectional regression analysis and ranked portfolio tests. Monthly return data was provided by Morningstar and consists of 88 mutual funds. Results show that small cap funds earn back a significant amount of their expenses, but on average loose to their benchmark index. The evidence of performance persistence over 12-month time period is weak. Managerial activity is shown to positively contribute to fund performance

Post-transaction brand and model line-up integration in the automotive industry: Case studies of European companies as target of acquisitions by Chinese and Indian multinational corporations

Corporations practice company acquisitions in order to create shareholder’s value. During the last few decades, the companies in emerging markets have become active in the acquisition business. During the last decade, large and significant acquisitions have occurred especially in automotive industry. While domestic markets have become too competitive and companies are lacking required capabilities, they seek possibilities to expand into Western markets by attaining valuable assets through acquisitions of developed country corporations. This study discusses the issues and characteristics of these acquisitions through case studies. The purpose of this study was to identify the acquisition motives and strategies for post-transaction brand and product integration as well as analyze the effect of the motives to the integration strategy. The cases chosen for the research were Chinese Geely acquiring Swedish Volvo in 2010 and Indian Tata Motors buying British Jaguar Land Rover in 2008. The main topics were chosen according to their significance for companies in automotive industry as well as those are most visible parts for consumers. The study is based on qualitative case study methods, analyzing secondary data from academic papers and news articles as well as companies’ own announcements e.g. stock exchange and press releases. The study finds that the companies in the cases mainly possessed asset-seeking and market-seeking motives. In addition, the findings refer to rather minimal post-acquisition brand and product integration strategies. Mainly the parent companies left the target company autonomous to make their own business strategies and decisions. The most noticeable integrations were in the product development and production processes. Through restructuring the product architectures, the companies were able to share components and technology between product families and brands, which results in cutting down costs and in increase of profitability and efficiency. In the Geely- Volvo case, the strategy focused more on component sharing and product development know-how, whereas in Tata Motors-Jaguar Land Rover case, the main actions were to cut down costs through component sharing and combine production and distribution networks especially in Asian markets. However, it was evident that in both cases the integration and technology sharing were executed cautiously to prevent on harming the valuable image of the luxury brand. This study has concluded that the asset-seeking motives have significant influence on the posttransaction brand and model line-up integration strategies. By taking a cautious approach in acquiring assets, such as luxury brand, the companies in the cases have implemented a successful post-acquisition strategy and managed to create value for the shareholders at least in short-term. Yritykset harjoittavat yritysostoja luodakseen osakkeenomistajille lisäarvoa. Viimeisten muutamien vuosikymmenien aikana yritykset kehittyvissä maissa ovat myös aktivoituneet yritysostoissa. Viimeisen vuosikymmenen aikana erityisesti autoteollisuudessa on esiintynyt suuria ja merkittäviä yritysostoja. Koska kilpailu kotimaan markkinoilla on kiristynyt ja yritykset ovat vailla vaadittavia valmiuksia, ne etsivät mahdollisuuksiaan laajentaa länsimaisiin markkinoihin hankkimalla arvokkaita etuja kehittyneiden maiden yrityksistä yritysostojen avulla. Tämä tutkimus pohtii näiden yritysostojen olennaisia kysymyksiä ja ominaisuuksia casetutkimuksien kautta. Tutkimuksen tarkoitus oli tunnistaa sekä yritysostojen motiiveja ja brändi- ja mallisto-integraation strategioita että analysoida kyseisten motiivien vaikutusta integraatiostrategiaan. Tapaus-tutkimuksiksi valittiin kiinalaisen Geelyn yritysosto ruotsalaisesta Volvosta vuonna 2010 ja intialaisen Tata Motorsin yritysosto englantilaisesta Jaguar Land Roverista vuonna 2008. Tutkimus on kvalitatiivinen case-tutkimus ja siinä analysoidaan toissijaista tietoa sekä akateemisten ja uutisartikkeleiden että yritysten omien ilmoitusten, kuten pörssi- ja lehdistötiedotteiden, kautta. Tutkimuksen tulokset osoittavat, että tutkittujen yritysten toiminnat perustuivat motiiveihin, joita ajoivat etujen and uusien markkinoiden tarve. Sen lisäksi tutkimustulokset osoittivat, että yritysoston jälkeinen brändi- ja mallisto-integraatio pidettiin minimaalisena. Pääasiallisesti kohdeyrityksille jätettiin autonomia tehdä omat liikkeenjohdolliset päätökset yritysstrategioihin liittyen. Huomattavimmat integraatiot koskivat tuotekehityksellisiä ja tuotannollisia prosesseja. Kehittämällä uudelleen tuotearkkitehtuureja, yritykset pystyivät jakamaan komponentteja ja teknologiaa tuoteperheiden ja brändien välillä. Tämä mahdollisti kustannusleikkauksia sekä kannattavuuden ja tehokkuuden parantamista. Geely-Volvo –tapauksessa integraatiostrategia keskittyi komponenttien jakamiseen yhteisten tuotearkkitehtuurien avulla ja tuotekehityksen ammattitaitoon, kun taas Tata Motors-JLR –tapauksessa päätoiminnat olivat kustannuksien leikkaus sekä tuotannon ja jakeluverkoston yhdistäminen erityisesti Aasian maissa. Yhteistä yrityskaupoissa oli, että brändi- ja mallisto-integraatio sekä teknologian jakaminen suoritettiin varoen ehkäistäkseen arvokkaiden luksus-brändien tuotekuvan vahingoittamista. Tutkimuksen lopputulokset osoittavat, että yrityskaupan motiiveilla on huomattava vaikutus brändija mallisto-integraation strategiaan. Toteuttamalla varovaista lähestymistapaa luksus-brändin hankinnassa ja integraatiossa, yritykset ovat onnistuneet luomaan lisäarvoa osakkeenomistajille vähintään lyhyellä aikavälillä.