Venttiili- ja toimilaitetehtaan tuotannon suunnittelu

Venttiili- ja toimilaitetehtaassa kokoonpannaan erilaisia venttiilityyppejä sekä toimi- laitteita. Koko Metso Automationin Helsingin tehtaiden tuotantotilanteen muuttuessa käynnistettiin kehitysprojekti, jonka tarkoituksena oli uudenaikaistaa venttiilien ja toimilaitteiden valmistus vastaamaan nykypäivän vaatimuksia. Laajamittaisen osa- valmistuksen ulkoistuksen ja tuotteiston muutoksen vuoksi tuotannon uudelleen- järjestäminen oli välttämätöntä. Diplomityön tarkoituksena oli suunnitella venttiili- ja toimilaitetehtaan layout sekä uutta tuotantotilannetta vastaavat toimintatavat. Haasteena oli kolmen hyvin erilailla toimivan tuotetehtaan yhdistäminen yhdeksi kokonaisuudeksi, jossa kunkin tehtaan parhaat toimintatavat yhdistyvät. Nykyinen tuotanto ja valmistusmäärät kartoitettiin ja analysoitiin, minkä jälkeen tuotannon suunnittelu uusiin tiloihin käynnistettiin. Työ jaettiin järjestelmällisesti osiin teorian ja käytännön osuuksien kesken siten, että teoria tukee työn käytännön- osuutta. Apuna käytettiin useita erilaisia materiaalivirtojen kartoitusmenetelmiä, lukuisia mittareita, selvityksiä, ennusteita ja erilaisia malleja tulevasta tuotannosta. Layout suunniteltiin käytössäolevaan tehdashalliin, mikä aiheutti runsaasti haasteita ja rajoitteita. Aikataulu tehtiin tarkasti siten, että muuttojärjestys lyötiin lukkoon, mutta kuormitustilanne ja koneiden siirrot aiheuttivat muutoksia aikataulussa. Tavoite tuotannon häiriöttömyydestä toteutui hyvin aikataulun kustannuksella. Käytännönosuudessa tarkasteltiin erityisesti kapasiteetin joustavuutta kuormituksen vaihdellessa sekä kehitettiin toimintatavat, joilla se hallitaan. Lisäksi tutkimuksen aikana käynnistettiin useita kehitysprojekteja työn tulosten pohjalta. Näitä olivat erilaiset varaston hallintaan sekä solujen itseohjautuvuuteen liittyvät asiat. Diplomityön tuloksena saatiin uusi layout sekä sitä tukeva uusi toimintatapa, solujen itseohjautuvuuden kehittäminen käynnistettiin, varastojen hallinnan osittainen ulkoistaminen aloitettiin. Lisäksi tuotannolle kehitettiin lukuisia seurantamittareita. Layoutprojekti toteutettiin loppuun diplomityön aikana

Prediction in transformed images

The study is related to lossless compression of greyscale images. The goal of the study was to combine two techniques of lossless image compression, i.e. Integer Wavelet Transform and Differential Pulse Code Modulation to attain better compression ratio. This is an experimental study, where we implemented Integer Wavelet Transform, Differential Pulse Code Modulation and an optimized predictor model using Genetic Algorithm. This study gives encouraging results for greyscale images. We achieved a better compression ration in term of entropy for experiments involving quadrant of transformed image and using optimized predictor coefficients from Genetic Algorithm. In an other set of experiments involving whole image, results are encouraging and opens up many areas for further research work like implementing Integer Wavelet Transform on multiple levels and finding optimized predictor at local levels.

Development of phase retrieval algorithm and techniques for optical spectrum analysis

Coherent anti-Stokes Raman scattering is the powerful method of laser spectroscopy in which significant successes are achieved. However, the non-linear nature of CARS complicates the analysis of the received spectra. The objective of this Thesis is to develop a new phase retrieval algorithm for CARS. It utilizes the maximum entropy method and the new wavelet approach for spectroscopic background correction of a phase function. The method was developed to be easily automated and used on a large number of spectra of different substances.. The algorithm was successfully tested on experimental data.

Sertifioidun puuraaka-aineen ja sertifioitujen tuotteiden tietojärjestelmän määrittely

Asiakkaiden kiinnostus tuotteiden raaka-aineiden alkuperää kohden on kasvanut. Puuraaka-aineesta tehtyjen tuotteiden alkuperä voidaan todentaa sertifikaatilla, jos puu on peräisin sertifioidusta metsästä ja sen alkuperäketju tunnetaan. Tieto sertifioidusta tuotteesta kulkeutuu asiakkaalle leimaamalla tuotteita sertifioinnista kertovin merkein tai merkitsemällä esimerkiksi tuotteen asiakirjaan sertifioinnista kertova teksti. Tutkimus tehtiin Stora Enson Imatran tehtaalle, jolla oli tarve uudelle tietojärjestelmälle. Tutkimuksen tarkoituksena oli määritellä sertifioidun puuraaka-aineen käytön ja sertifioituina myytävien tuotteiden seurannan mandollistava tietojärjestelmä. Puun alkuperäketjun hallinnan standardit määiittävät, paljonko sertifioitua puuta kohdennettava tuotteelle, jos tuotteita halutaan myydä sertifioituna. Tietojärjestelmän määrittelyn lisäksi oli tarve selvittää prosessi, kuinka tuotteisiin ja asiakirjoihin saataisiin sertifioinnista kertova leima. Tutkimusta tehdessä selvisi, että tehtaan nykyiset myyntitoiminnot ja tietojärjestelmät asettavat rajoituksia tuotteiden ja asiakirjojen leimaukselle. Prosessia kartoitettiin mm. haastatt elemalla tehtaan ti etojärj estelmi en, myynti- ja varastotoimintojen parissa työskenteleviä ihmisiä. Haastattelujen perusteella koottiin myös tietojärjestelmän asiakasvaatimukset. Vaatimusmäärittelyä tehdessä huomioitiin myös alkuperäketjun hallinnan standardien vaatimukset. Määriteltävän tietojärjestelmän toimintaa pyrittiin havainnollistamaan tehtaan edustajille prototyyppien avulla. Lisäksi tutkimuksessa on pyritty havainnollistamaan järjestelmän toimintaa erilaisin kaavioin ja kuvin. Haasteena työssä oli tulkita standardeja ja kerätä yhteen toisistaan poikkeavia asiakasvaatimuksia.

Voimalaitoksen BoP-järjestelmien prosessikaavioiden ja -kuvausten suunnitteluohjeistus

Tässä työssä luodaan voimalaitoksen BoP- järjestelmien prosessikaavioiden- ja kuvausten suunnitteluohjeistus Sweco Industy Oy:n energia-yksikölle. BoP- järjestelmiin lukeutuvat tässä kaikki oleellisimmat voimalaitoksen apujärjestelmät kuten esimerkiksi suljettu jäähdytysvesipiiri. Tämä työ on tehty erään Keski-Euroopan alueella sijaitsevan voimalaitosprojektin yhteydessä ja tämä ohjeistus toimii pohjatietona myöhemmin tehtäville täydennyksille. Työn alkuosassa esitellään käytössä oleva piirto-ohjelma sekä sovellettava standardi KKS ja sen käyttö. Käytetyt kaaviotyypit ja niiden sisältö käydään pääpiirteissään läpi. Pääpaino työssä on PI-kaavioiden suunnittelemisen ja piirtämisen ohjeistaminen ja yhdenmukaistaminen. Piirtämiseen ja kaavioiden esittämiseen on kerätty olemassa olevaa tietoa eri suunnittelijoilta joiden avulla on valittu käyttöön tuleva esitystapa. Työn aikana ilmeni ongelmia prosessikaavioiden piirto-ohjelman kanssa. Piirto-ohjelmana käytetty Comos on vielä kehitysvaiheessa ja sen tietokannan ja toiminnan muokkaaminen yhtiön tarpeita vastaavaksi tulee viemään vielä aikaa. Tämä onkin tulevaisuutta ajatellen tärkein kehityskohde.

The Role of Surfactant Properties of Extractants in Hydrometallurgical LiquidLiquid Extraction Processes

The amphiphilic nature of metal extractants causes the formation of micelles and other microscopic aggregates when in contact with water and an organic diluent. These phenomena and their effects on metal extraction were studied using carboxylic acid (Versatic 10) and organophosphorus acid (Cyanex 272) based extractants. Special emphasis was laid on the study of phase behaviour in a pre neutralisation stage when the extractant is transformed to a sodium or ammonium salt form. The pre neutralised extractants were used to extract nickel and to separate cobalt and nickel. Phase diagrams corresponding to the pre neutralisation stage in a metal extraction process were determined. The maximal solubilisation of the components in the system water(NH3)/extractant/isooctane takes place when the molar ratio between the ammonia salt form and the free form of the extractant is 0.5 for the carboxylic acid and 1 for the organophosphorus acid extractant. These values correspond to the complex stoichiometry of NH4A•HA and NIi4A, respectively. When such a solution is contacted with water a microemulsion is formed. If the aqueous phase contains also metal ions (e.g. Ni²+), complexation will take place on the microscopic interface of the micellar aggregates. Experimental evidence showing that the initial stage of nickel extraction with pre neutralised Versatic 10 is a fast pseudohomogeneous reaction was obtained. About 90% of the metal were extracted in the first 15 s after the initial contact. For nickel extraction with pre neutralised Versatic 10 it was found that the highest metal loading and the lowest residual ammonia and water contents in the organic phase are achieved when the feeds are balanced so that the stoichiometry is 2NH4+(org) = Nit2+(aq). In the case of Co/Ni separation using pre neutralised Cyanex 272 the highest separation is achieved when the Co/extractant molar ratio in the feeds is 1 : 4 and at the same time the optimal degree of neutralisation of the Cyanex 272 is about 50%. The adsorption of the extractants on solid surfaces may cause accumulation of solid fine particles at the interface between the aqueous and organic phases in metal extraction processes. Copper extraction processes are known to suffer of this problem. Experiments were carried out using model silica and mica particles. It was found that high copper loading, aromacity of the diluent, modification agents and the presence of aqueous phase decrease the adsorption of the hydroxyoxime on silica surfaces.

Idea- ja innovaatioporfolion hallinta

Tässä kandidaatintyössä tarkastellaan idea- ja innovaatioportfolion hallintaa, portfoliojohtamista sekä näihin soveltuvia erilaisia menetelmiä yrityksen näkökulmasta. Tavoitteena on luoda yleiskatsaus yleisimpiin käytettyihin menetelmiin ja viitekehyksiin. Lähteinä työssä on käytetty sähköisiä tietokantoja ja alan kirjallisuutta. Käytetyimmät portfolion hallintamenetelmät voidaan jakaa neljään ryhmään: taloudelliset ja rahamääräiset mittarit, liiketoimintastrategiat, portfoliokartat tai kupla-diagrammit, scorecard:it eli pisteytystaulukot sekä tarkistuslistat. Idea- ja innovaatioportfolion hallinnan tavoitteena on luoda yrityksen kannalta mahdollisimman tehokas ja tuottava portfolio, joka on kuitenkin linjassa yrityksen strategian kanssa. Portfolion projekteille jaettavissa olevat resurssit ovat niukat, joten resurssien jakoon ja tehokkaaseen hyödyntämiseen tulee kiinnittää huomiota. Portfolion tasapainottamiseksi on hyvä tarkastella kehitys- ja tutkimusprojektien määrää, kokoa ja riskiä. Teknologiatiekartta on yrityksen strateginen työkalu, jolla se voi suunnata toimintaansa kohti sen visiota. Teknologiatiekartta koostuu yrityksen valitsemista markkinoista, niille suunnatuista tuotteista tai palveluista, sekä näiden vaatimista tuotekehitysprojekteista ja teknologioista. Projektien etenemistä voidaan tarkastella stage-gate -mallin avulla. Stage-gate jakaa projektin porteilla eri vaiheisiin. Jokaisen portin läpäistäkseen projektin tulee täyttää sille asetetut vaatimukset. Menetelmät eivät takaa menestystä, vaan yrityksen on valittava itselleen sopivat menetelmät siten, että ne tukevat portfoliojohtamista ja sopivat yhteen yrityskulttuurin kanssa. Pelkkä mittareihin tuijottaminen ei riitä, vaan niiden taakse on myös osattava katsoa ja huomioida yrityksen strategia.

Epäpuhtausmetallien talteenotto sinkkiprosessissa

There are small amounts of valuable metals, such as indium, gallium and germanium, in zinc process solutions. Their solvent extraction was studied in this work in sulphate solutions containing zinc and other metals present in industrial solutions. It was discovered, that a commercial bis(2-ethylhexyl)phosphate (D2EHPA) extractant can be used to extract indium and gallium. Indium was extracted separately at a higher acid concentration than gallium. Zinc was co-extracted faster than gallium and almost as much as gallium at the same pH. However, the scrubbing of zinc was possible using a dilute sulphuric acid and a short contact time while gallium losses were small. Both indium and gallium were stripped with sulphuric acid. Germanium was extracted with 5,8-diethyl-7-hydroxydodecane-6-oxime with the commercial name of LIX 63. Unlike other metals in the solution the extraction of germanium increased with different extractants as the acidity increased. Germanium extraction isotherm was measured for a 125 g/L sulfuric acid solution. The loaded organic phase was washed with pure water. It removed the co-extracted acid and part of the germanium and extracted impurities such as iron and copper. Germanium was stripped using a NaOH solution. A process model utilizing own experimentally determined extraction, scrubbing and stripping isotherms was made with HSC Sim software developed by Outotec Oyj. The model based on McCabe–Thiele diagrams was used in sizing the necessary amount of stages and phase ratios in a recovery process. It was concluded, that indium, gallium and germanium can be recovered in the process from a feed where their concentrations are low (<300 ppm). In an example case the feed contained also more than 20 g/L zinc and 2–8 g/L iron, aluminium and copper. The recoveries of indium, gallium and germanium were more than 90 % when 1–3 stages were used in each extraction, scrubbing and stripping section. Since the number of stages is small mixer-settlers would be well suited for this purpose.

First principles modeling of metallic alloys and alloy surfaces

By alloying metals with other materials, one can modify the metal’s characteristics or compose an alloy which has certain desired characteristics that no pure metal has. The field is vast and complex, and phenomena that govern the behaviour of alloys are numerous. Theories cannot penetrate such complexity, and the scope of experiments is also limited. This is why the relatively new field of ab initio computational methods has much to give to this field. With these methods, one can extend the understanding given by theories, predict how some systems might behave, and be able to obtain information that is not there to see in physical experiments. This thesis pursues to contribute to the collective knowledge of this field in the light of two cases. The first part examines the oxidation of Ag/Cu, namely, the adsorption dynamics and oxygen induced segregation of the surface. Our results demonstrate that the presence of Ag on the Cu(100) surface layer strongly inhibits dissociative adsorption. Our results also confirmed that surface reconstruction does happen, as experiments predicted. Our studies indicate that 0.25 ML of oxygen is enough for Ag to diffuse towards the bulk, under the copper oxide layer. The other part elucidates the complex interplay of various energy and entropy contributions to the phase stability of paramagnetic duplex steel alloys. We were able to produce a phase stability map from first principles, and it agrees with experiments rather well. Our results also show that entropy contributions play a very important role on defining the phase stability. This is, to the author’s knowledge, the first ab initio study upon this subject.

Tool-supported invariant-based programming

The development of correct programs is a core problem in computer science. Although formal verification methods for establishing correctness with mathematical rigor are available, programmers often find these difficult to put into practice. One hurdle is deriving the loop invariants and proving that the code maintains them. So called correct-by-construction methods aim to alleviate this issue by integrating verification into the programming workflow. Invariant-based programming is a practical correct-by-construction method in which the programmer first establishes the invariant structure, and then incrementally extends the program in steps of adding code and proving after each addition that the code is consistent with the invariants. In this way, the program is kept internally consistent throughout its development, and the construction of the correctness arguments (proofs) becomes an integral part of the programming workflow. A characteristic of the approach is that programs are described as invariant diagrams, a graphical notation similar to the state charts familiar to programmers. Invariant-based programming is a new method that has not been evaluated in large scale studies yet. The most important prerequisite for feasibility on a larger scale is a high degree of automation. The goal of the Socos project has been to build tools to assist the construction and verification of programs using the method. This thesis describes the implementation and evaluation of a prototype tool in the context of the Socos project. The tool supports the drawing of the diagrams, automatic derivation and discharging of verification conditions, and interactive proofs. It is used to develop programs that are correct by construction. The tool consists of a diagrammatic environment connected to a verification condition generator and an existing state-of-the-art theorem prover. Its core is a semantics for translating diagrams into verification conditions, which are sent to the underlying theorem prover. We describe a concrete method for 1) deriving sufficient conditions for total correctness of an invariant diagram; 2) sending the conditions to the theorem prover for simplification; and 3) reporting the results of the simplification to the programmer in a way that is consistent with the invariantbased programming workflow and that allows errors in the program specification to be efficiently detected. The tool uses an efficient automatic proof strategy to prove as many conditions as possible automatically and lets the remaining conditions be proved interactively. The tool is based on the verification system PVS and i uses the SMT (Satisfiability Modulo Theories) solver Yices as a catch-all decision procedure. Conditions that were not discharged automatically may be proved interactively using the PVS proof assistant. The programming workflow is very similar to the process by which a mathematical theory is developed inside a computer supported theorem prover environment such as PVS. The programmer reduces a large verification problem with the aid of the tool into a set of smaller problems (lemmas), and he can substantially improve the degree of proof automation by developing specialized background theories and proof strategies to support the specification and verification of a specific class of programs. We demonstrate this workflow by describing in detail the construction of a verified sorting algorithm. Tool-supported verification often has little to no presence in computer science (CS) curricula. Furthermore, program verification is frequently introduced as an advanced and purely theoretical topic that is not connected to the workflow taught in the early and practically oriented programming courses. Our hypothesis is that verification could be introduced early in the CS education, and that verification tools could be used in the classroom to support the teaching of formal methods. A prototype of Socos has been used in a course at Åbo Akademi University targeted at first and second year undergraduate students. We evaluate the use of Socos in the course as part of a case study carried out in 2007.

Studies on Neuromuscular Blocking Agents and Their Antagonists During Anaesthesia

Neuromuscular blocking agents (NMBAs) are widely used in clinical anaesthesia and emergency medicine. Main objectives are to facilitate endotracheal intubation and to allow surgery by reducing muscle tone and eliminating sudden movements, which may otherwise lead to trauma and complications. The most commonly used NMBAs are non-depolarizing agents with a medium duration of action, such as rocuronium and cisatracurium. They bind to the acetylcholine receptors in the neuromuscular junction, thus inhibiting the depolarization of the postsynaptic (muscular) membrane, which is a prerequisite for muscle contraction to take place. Previously, it has been assumed that nitrous oxide (N2O), which is commonly used in combination with volatile or intravenous anaesthetics during general anaesthesia, has no effect on NMBAs. Several studies have since claimed that N2O in fact does increase the effect of NMBAs when using bolus administration of the relaxant. The effect of N2O on the infusion requirements of two NMBAs (rocuronium and cisatracurium) with completely different molecular structure and pharmacological properties was assessed. A closed-loop feedback controlled infusion of NMBA with duration of at least 90 minutes at a 90% level of neuromuscular block was used. All patients received total intravenous anaesthesia (TIVA) with propofol and remifentanil. In both studies the study group (n=35) received N2O/Oxygen and the control group (n=35) Air/Oxygen. There were no significant differences in the mean steady state infusion requirements of NMBA (rocuronium in Study I; cisatracurium in Study II) between the groups in either study. In Study III the duration of the unsafe period of recovery after reversal of rocuronium-induced neuromuscular block by using neostigmine or sugammadex as a reversal agent was analyzed. The unsafe period of recovery was defined as the time elapsed from the moment of no clinical (visual) fade in the train-of-four (TOF) sequence until an objectively measured TOF-ratio of 0.90 was achieved. The duration of these periods were 10.3 ± 5.5 and 0.3 ± 0.3 min after neostigmine and sugammadex, respectively (P < 0.001). Study IV investigated the possible effect of reversal of a rocuronium NMB by sugammadex on depth of anaesthesia as indicated by the bispectral index and entropy levels in thirty patients. Sugammadex did not affect the level of anaesthesia as determined by EEG-derived indices of anaesthetic depth such as the bispectral index and entropy.

Design of marine generators for alternative diesel-electric power systems

This study compares different electric propulsion systems. Results of the analysis of all the advantages and disadvantages of the different propulsion systems are given. This thesis estimates possibilities to apply different diesel-electric propulsion concepts for different vessel types. Small and medium size vessel’s power ranges are studied. The optimal delivery system is chosen. This choice is made on the base of detailed study of the concepts, electrical equipment market and comparison of mass, volume and efficiency parameters. In this thesis three marine generators are designed. They are: salient pole synchronous generator and two permanent magnet synchronous generators. Their electrical, dimensional, cost and efficiency parameters are compared. To understand all the benefits diagrams with these parameters are prepared. Possible benefits and money savings are estimated. As the result the advantages, disadvantages and boundary conditions for the permanent magnet synchronous generator application in marine electric-power systems are found out.

Applications of graph transformation in tools for domain-specific modeling languages

The use of domain-specific languages (DSLs) has been proposed as an approach to cost-e ectively develop families of software systems in a restricted application domain. Domain-specific languages in combination with the accumulated knowledge and experience of previous implementations, can in turn be used to generate new applications with unique sets of requirements. For this reason, DSLs are considered to be an important approach for software reuse. However, the toolset supporting a particular domain-specific language is also domain-specific and is per definition not reusable. Therefore, creating and maintaining a DSL requires additional resources that could be even larger than the savings associated with using them. As a solution, di erent tool frameworks have been proposed to simplify and reduce the cost of developments of DSLs. Developers of tool support for DSLs need to instantiate, customize or configure the framework for a particular DSL. There are di erent approaches for this. An approach is to use an application programming interface (API) and to extend the basic framework using an imperative programming language. An example of a tools which is based on this approach is Eclipse GEF. Another approach is to configure the framework using declarative languages that are independent of the underlying framework implementation. We believe this second approach can bring important benefits as this brings focus to specifying what should the tool be like instead of writing a program specifying how the tool achieves this functionality. In this thesis we explore this second approach. We use graph transformation as the basic approach to customize a domain-specific modeling (DSM) tool framework. The contributions of this thesis includes a comparison of di erent approaches for defining, representing and interchanging software modeling languages and models and a tool architecture for an open domain-specific modeling framework that e ciently integrates several model transformation components and visual editors. We also present several specific algorithms and tool components for DSM framework. These include an approach for graph query based on region operators and the star operator and an approach for reconciling models and diagrams after executing model transformation programs. We exemplify our approach with two case studies MICAS and EFCO. In these studies we show how our experimental modeling tool framework has been used to define tool environments for domain-specific languages.

Multifrequency VLBI Observations of Selected Active Galactic Nuclei

In this dissertation, active galactic nuclei (AGN) are discussed, as they are seen with the high-resolution radio-astronomical technique called Very Long Baseline Interferometry (VLBI). This observational technique provides very high angular resolution (_ 10−300 = 1 milliarcsecond). VLBI observations, performed at different radio frequencies (multi-frequency VLBI), allow to penetrate deep into the core of an AGN to reveal an otherwise obscured inner part of the jet and the vicinity of the AGN’s central engine. Multi-frequency VLBI data are used to scrutinize the structure and evolution of the jet, as well as the distribution of the polarized emission. These data can help to derive the properties of the plasma and the magnetic field, and to provide constraints to the jet composition and the parameters of emission mechanisms. Also VLBI data can be used for testing the possible physical processes in the jet by comparing observational results with results of numerical simulations. The work presented in this thesis contributes to different aspects of AGN physics studies, as well as to the methodology of VLBI data reduction. In particular, Paper I reports evidence of optical and radio emission of AGN coming from the same region in the inner jet. This result was obtained via simultaneous observations of linear polarization in the optical and in radio using VLBI technique of a sample of AGN. Papers II and III describe, in detail, the jet kinematics of the blazar 0716+714, based on multi-frequency data, and reveal a peculiar kinematic pattern: plasma in the inner jet appears to move substantially faster that that in the large-scale jet. This peculiarity is explained by the jet bending, in Paper III. Also, Paper III presents a test of the new imaging technique for VLBI data, the Generalized Maximum Entropy Method (GMEM), with the observed (not simulated) data and compares its results with the conventional imaging. Papers IV and V report the results of observations of the circularly polarized (CP) emission in AGN at small spatial scales. In particular, Paper IV presents values of the core CP for 41 AGN at 15, 22 and 43 GHz, obtained with the help of the standard Gain transfer (GT) method, which was previously developed by D. Homan and J.Wardle for the calibration of multi-source VLBI observations. This method was developed for long multi-source observations, when many AGN are observed in a single VLBI run. In contrast, in Paper V, an attempt is made to apply the GT method to single-source VLBI observations. In such observations, the object list would include only a few sources: a target source and two or three calibrators, and it lasts much shorter than the multi-source experiment. For the CP calibration of a single-source observation, it is necessary to have a source with zero or known CP as one of the calibrators. If the archival observations included such a source to the list of calibrators, the GT could also be used for the archival data, increasing a list of known AGN with the CP at small spatial scale. Paper V contains also calculation of contributions of different sourced of errors to the uncertainty of the final result, and presents the first results for the blazar 0716+714.

Hitsausvirtalähteen ohjaus lämmöntuonnin ja jatkuvan jäähtymisen S-käyrän perusteella

Lämmöntuonnilla on oleellinen vaikutus hitsausliitoksen ominaisuuksiin, koska se vaikuttaa liitoksen jäähtymisnopeuteen, jolla on puolestaan suuri vaikutus jäähtymisessä syntyviin mikrorakenteisiin. Jatkuvan jäähtymisen S-käyrältä voidaan ennustaa hitsausliitokseen syntyvät mikrorakenteet. S-käyrät voidaan laatia hitsausolosuhteiden mukaisesti, jolloin faasimuutoskäyttäytyminen sularajalla saadaan selvitettyä. Tämän diplomityön tavoitteena oli kehittää hitsausvirtalähteen ohjaustapaa lämmöntuontiin ja jatkuvan jäähtymisen S-käyriin perustuen. Jatkuvan jäähtymisen S-käyrillä ja lämmöntuontiin perustuvalla hitsausparametrien säädöllä on yhteys. Työssä tutkittiin, miten haluttuun jäähtymisnopeuteen johtava lämmöntuonti voidaan määrittää S-käyrälle luotettavasti. Työssä perehdyttiin jatkuvan jäähtymisen S-käyriin ja eri jäähtymisnopeuksilla hitsausliitokseen syntyviin mikrorakenteisiin sekä hitsaus-inverttereiden ohjaus- ja säätötekniikkaan. Teoriaosuuden jälkeen tarkasteltiin eri vaihtoehtoja, miten hitsattavan materiaalin koostumusvaihtelut sekä lämmöntuontiin vaikuttavat tekijät voidaan ottaa huomioon virtalähteen ohjauksessa lämmöntuonnin perusteella. S-käyrältä määritettyjen lämmöntuonnin arvojen perusteella tehtiin kahdet koehitsaukset, joissa käytettiin kolmea eri aineenpaksuutta. Tulosten perusteella arvioitiin lämmöntuonnin arvojen toimivuutta käytännössä ja tutkittiin liitokseen syntyviä mikrorakenteita. Tutkimuksen pohjalta esitettiin jatkokehitystoimenpiteitä, joiden mukaan voidaan edetä lämmöntuontiin perustuvan säätöjärjestelmän kehitysprojektissa.