Ympäristöteknologioiden verifioinnin mahdollisuudet pilaantuneiden maiden laadukkaan käsittelyn edistämisessä

EU on käynnistämässä ympäristöteknologioiden verifiointijärjestelmää, jonka avulla voidaan tarjota käyttäjille ja sijoittajille riippumatonta tietoa innovatiivisten teknologioiden toimivuudesta ja suorituskyvystä ja parantaa niiden markkina-asemaa. Verifioinnilla tarkoitetaan kolmannen osapuolen suorittamaa prosessia tai mekanismia, jonka avulla tuotteen toiminta ja suorituskyky voidaan todentaa. Kansallinen ympäristöteknologioiden verifiointijärjestelmä on käytössä mm. Yhdysvalloissa ja Kanadassa. Euroopassa järjestelmä otettaneen käyttöön vuonna 2011–2012. Suomessa tehdään nykyisin noin 300 pilaantuneen maan puhdistushanketta koskevaa lupa- ja ilmoituspäätöstä vuosittain. Noin 85 prosentissa kohteista käytetään kunnostusmenetelmänä massanvaihtoa. Massanvaihto tulee ainakin toistaiseksi säilymään yleisimpänä kunnostusmenetelmänä, mutta mm. in situ -menetelmien käytön arvioidaan lisääntyvän. Tämän diplomityön tavoitteena oli arvioida voidaanko verifiointia hyödyntää pilaantuneiden maiden laadukkaan käsittelyn edistämisessä ja voiko verifiointi nopeuttaa innovatiivisten kunnostusmenetelmien markkinoillepääsyä. Aihetta tarkasteltiin mm. kahden erityyppisen pilaantuneen maan ja pohjaveden kunnostusmenetelmän, reaktiivisten seinämien (in situ) ja bitumistabiloinnin (ex situ) kautta. Pilaantuneiden maiden kunnostusmenetelmien toimivuus riippuu monista eri tekijöistä, joista osaa ei voida hallita tai mallintaa luotettavasti. Verifiointi soveltuukin parhaiten laitteiden tai PIMA-menetelmiä yksinkertaisempien puhdistusmenetelmien suorituskyvyn todentamiseen. Verifiointi saattaa kuitenkin hyvin toimia PIMA-kunnostuksen kohdalla esimerkiksi tiedollisena ohjauskeinona. Reaktiivisten seinämien ja bitumistabiloinnin verifioinnin työvaiheet ovat hyvin samankaltaiset, suurimpana erona seinämien kohdalla tulee kuvata myös kohde johon seinämä on asennettu. Reaktiivisten seinämien toiminta on riippuvaista monista ympäristötekijöistä, toisin kuin erillisellä laitteistolla suoritettavan bitumistabiloinnin. Tulosten perusteella voidaan yleistää, että verifiointi soveltuu paremmin ex situ -, kuin in situ -kunnostusmenetelmille.

Application of electrokinetic Fenton process for the remediation of soil contaminated with HCB

Electrokinetic remediation coupled with Fenton oxidation, widely called as Electrokinetic Fenton process is a potential soil remediation technique used for low permeable soil. The applicability of the process has been proved with soil contaminated with a wide range of organic compounds from phenol to the most recalcitrant ones such as PAHs and POPs. This thesis summarizes the major findings observed during an Electrokinetic Fenton Process study conducted for the remediation of low permeable soil contaminated with HCB, a typical hydrophobic organic contaminant. Model low permeable soil, kaolin, was artificially contaminated with HCB and subjected to Electrokinetic Fenton treatments in a series of laboratory scale batch experiments. The use of cyclodextrins as an enhancement agent to mobilize the sorbed contaminant through the system was investigated. Major process hindrances such as the oxidant availability and treatment duration were also addressed. The HCB degradation along with other parameters like soil pH, redox and cumulative catholyte flow were analyzed and monitored. The results of the experiments strengthen the existing knowledge on electrokinetic Fenton process as a promising technology for the treatment of soil contaminated with hydrophobic organic compounds. It has been demonstrated that HCB sorbed to kaolin can be degraded by the use of high concentrations of hydrogen peroxide during such processes. The overall system performances were observed to be influenced by the point and mode of oxidant delivery. Furthermore, the study contributes to new knowledge in shortening the treatment duration by adopting an electrode polarity reversal during the process.

The potential of social networking sites in inpatriate adjustment

People make up one of the most important resources for a corporation and therefore it has to continuously seek an ever more diverse and international workforce. Inpatriation is another way of utilizing foreign expertise in a corporation. An inpatriate refers to a person that is on an international assignment at the headquarters of a corporation, where they have been sent either from a subsidiary abroad or from a third country outside the corporation. Strengthening the social network of the inpatriate and their family contributes to the adjustment process and furthermore the success of the work assignment. As social networking sites are currently the fastest developing personal networking tools in the world, it is interesting to see how they can help in inpatriate adjustment. The objective of this thesis is to explore the potential of social networking sites (SNS) in inpatriate adjustment. The main objective can be divided into three sub objectives: 1. What is SNS used for during the inpatriate assignment? 2. What are the inpatriates’ motivations to use SNS? 3. Could the three facets of adjustment (work, interaction and general) be gained through SNS? This qualitative study utilizes the theme interview data collection method and the thematic analysis approach for analysing the interview data. From the interviews with five Indian inpatriates in Finland the most mentioned uses of SNS were related to participating (sharing opinions, recommendations and discussing things and connecting to friends, family and colleagues) and consuming (collecting information for work and free time), the least mentioned use of SNS was producing (posting videos, photos and updates). An interesting finding was that the five interviewees did not use SNS for purely entertainment motives at all during their assignment. This thesis found that all three facets of adjustment could potentially be gained through SNS.

Social Networking Sites as a part of Medical Device Manufacturer's Marketing Communications

The purpose of the thesis is to examine how a medical device manufacturer can exploit social networking sites as a part of its everyday marketing communications. The ultimate goal is to create an ideal process of developing marketing communications in social networking sites as a medical device manufacturer with the help of theoretical knowledge and hands-on experience. Theoretical part examines the traditional process of developing marketing communications, defines social networking sites and presents marketing activities carried out on these sites as well as introduces the characteristics of healthcare technology industry. Empirical part is collected through participation in medical device manufacturer’s marketing operations and by observing effects of different factors and actions on social media marketing. In addition, completed interviews and a meeting with company’s personnel have been utilized for data collection. This part offers comprehensive information on the examined company’s current marketing operations, industry, and activities carried out on social networking sites. As a result of the thesis a comprehensive process description of integrating and using social networking sites as a part of company’s marketing communications was formed. With the help of the process description factors and actions which have an effect on marketing operations in social networking sites are presented and methods for further developing these activities are introduced.

Membrane development for oil contaminated water treatments

The aim of this Master’s thesis study was to develop a membrane for oil contaminated water treatments. Oily wastewaters are a big problem to environment and therefore it is important to find an efficient method for their treatment. There are several treatment methods, but one of the most promising methods is membrane filtration. In the theoretical part of this study the membrane technology and polymeric membrane preparation with phase inversion and membrane modification methods was discussed. It was also told about the most important properties of the membranes. Oily waters, their treatment methods and oily wastewater sources were discussed more specifically. In the experimental part membranes from cellulose acetate were prepared and membranes were modified with two different methods. Modification methods were surface modification and polymer mixing. The modification purpose was to make membranes more hydrophilic and increase surface charge, which can reduce fouling. Membranes were characterized by determining zeta potential, contact angle, oil retention, pure water permeability, pressure-normalized flux and fouling. It were used both synthetic and real spent oil-water emulsion in membrane filtration. Surface modification resulted membranes, which had better properties than unmodified membrane. The amount of substance used in surface modification affected a lot to membrane properties, so it would be necessary to try different amounts of substance to develop the best membrane for oil-water emulsion treatment.

Ultrasonic and Electrokinetic Remediation of Low Permeability Soil Contaminated with Persistent Organic Pollutants

Electrokinetics has emerged as a potential technique for in situ soil remediation and especially unique because of the ability to work in low permeability soil. In electrokinetic remediation, non-polar contaminants like most organic compounds are transported primarily by electroosmosis, thus the process is effective only if the contaminants are soluble in pore fluid. Therefore, enhancement is needed to improve mobility of these hydrophobic compounds, which tend to adsorb strongly to the soil. On the other hand, as a novel and rapidly growing science, the applications of ultrasound in environmental technology hold a promising future. Compared to conventional methods, ultrasonication can bring several benefits such as environmental friendliness (no toxic chemical are used or produced), low cost, and compact instrumentation. It also can be applied onsite. Ultrasonic energy applied into contaminated soils can increase desorption and mobilization of contaminants and porosity and permeability of soil through developing of cavitation. The research investigated the coupling effect of the combination of these two techniques, electrokinetics and ultrasonication, in persistent organic pollutant removal from contaminated low permeability clayey soil (with kaolin as a model medium). The preliminary study checked feasibility of ultrasonic treatment of kaolin highly contaminated by persistent organic pollutants (POPs). The laboratory experiments were conducted in various conditions (moisture, frequency, power, duration time, initial concentration) to examine the effects of these parameters on the treatment process. Experimental results showed that ultrasonication has a potential to remove POPs, although the removal efficiencies were not high with short duration time. The study also suggested intermittent ultrasonication over longer time as an effective means to increase the removal efficiencies. Then, experiments were conducted to compare the performances among electrokinetic process alone and electrokinetic processes combined with surfactant addition and mainly with ultrasonication, in designed cylinders (with filtercloth separating central part and electrolyte parts) and in open pans. Combined electrokinetic and ultrasonic treatment did prove positive coupling effect compared to each single process alone, though the level of enhancement is not very significant. The assistance of ultrasound in electrokinetic remediation can help reduce POPs from clayey soil by improving the mobility of hydrophobic organic compounds and degrading these contaminants through pyrolysis and oxidation. Ultrasonication also sustains higher current and increases electroosmotic flow. Initial contaminant concentration is an essential input parameter that can affect the removal effectiveness.

Ampumaratojen kunnostustarpeen selvittäminen

Suomessa arvioidaan olevan kaikkiaan 2000 - 2500 ampumarataa joista aktiivisessa käytössä on noin 1000 kpl. Useimmat ulkoradat on perustettu paljon ennen nykyisten ympäristölakien voimaantuloa. Tästä syystä ammunnan ympäristövaikutukset melua lukuun ottamatta, eivät varmaan ole olleet tarkasteltavien asioiden listan kärjessä ampumaratoja suunniteltaessa. Sopivan maa alueen saatavuus sopivalla paikalla rakennuskustannusten minimoimiseksi on täytynyt olla yksi tärkeimmistä kriteereistä. Joissakin tapauksissa tämä valitettavasti on johtanut siihen, että ratojen paikoiksi on valittu sellaisia, mitä tämän päivän tietämyksellä ei suositeltaisi, kuten esimerkiksi pohjaveden muodostumisalueet. Ampumaratojen, etenkin haulikkoratojen, on todettu aiheuttaneen paikallisesti varsin laajaa maaperän pilaantumista. Toiminnan jatkuessa, runsaasti raskasmetalleja kertyy maahan ja taustapenkkoihin josta se rapautuu ja kulkeutuu alueelta pohjavesiin. Pohjaveden mukana haitta-aineet saattavat kulkeutua vedenpuhdistamoihin muodostaen riskiä paikallisasukkaiden terveydelle sekä jossain määrin alueen kasvillisuudelle ja faunalle. Vuoden 2007 valtioneuvoston PIMA-asetus muutti joitakin ohje-arvoja, joten näitä uusia arvoja on otettavaa huomioon niin riskiarvioinnissa kuin alueen käyttömahdollisuuksien kannalta tulevaisuudessa. Asetuksen voimaantulo edellyttää tapauskohtaisten riskiarviointien tekemistä ampumarata-alueiden kunnostuksen yhteydessä jolloin saavutetaan mahdollisemman tehokasta hyöty-kustannustasoa. Tutkimuksen tarkoituksena on kartoittaa uuden asetuksen mukaisesti ampumaratojen muodostamaa riskiä sekä rajata kunnostettavat alueet ja valita sopivammat kunnostusvaihtoehdot. Esimerkkitapauksina käytetään Kokkolan kaupungin alueella sijaitsevaa ampumarata-aluetta.