Lämmönlähteiden aiheuttamien konvektiovirtausten vaikutus vastakkaiseen tuloilmasuihkuun

Huoneen sisäisten lämpölähteiden aiheuttamilla konvektiovirtauksilla eli pluumeilla on huomattava vaikutus ilmastointipalkkijärjestelmäntoimintaan. Tätä vaikutusta ei ole tutkittu kovin paljon. Tässä työssä tutkittiin huoneen päätyseinässä olevan sähkölämmityspatterin vaikutusta aktiivisen ilmastointipalkin toimintaan. Tutkimus kohdistui vastakkaisten suihkujen törmäykseen. Suihkuina olivat pluumit ja tuloilmavirtaus. Tutkimukseen kuului sekä teoreettinen että kokeellinen osio. Teoreettisessa tarkastelussa käytiin läpi ilmastointipalkin teoriaa sekä konvektiovirtausten muodostumisen teoriaa. Lisäksi esitettiin, kuinka suihkuista lasketaan liikemäärävirta. Kokeellisessa osiossa mitattiin huoneen sisäisten lämpölähteiden aiheuttamia pluumeja. Lämpölähteet oli sijoitettuina tutkimushuoneen päätyseinän viereen. Mittauksissa keskityttiin tarkemmin sähkölämmityspatteriin ja sitä mallinnettiin eri tehoilla. Lisäksi mitattiin ilmastointipalkin tuloilmavirtausta eri ilmamäärillä. Pluumien ja tuloilmavirtauksen törmäyskäyttäytymistä selvitettiin savukuvauksella. Analyysiosiossa sähkölämmityspatterin aiheuttaman pluumin ja palkin tuloilmavirtauksen törmäyskäyttäytymiselle kehitettiin malli. Mallissa huomioitiin vastaikkaisten törmäävien suihkujen liikemäärät ja esitettiin kohdat tutkimushuoneen pituussuunnassa, jossa tuloilmavirtaus kääntyy oleskeluvyöhykkeelle. Ilmastointipalkkijärjestelmässä tuloilmavirtauksen tulisi kääntyä oleskeluvyöhykkeelle vasta huoneen seinustalla. Tutkimuksen perusteella näin käy, jos pluumin liikemäärä on noin 10% tai vähemmän tuloilman liikemäärästä. Muulloin palkin tuloilmavirtaus kääntyy oleskeluvyöhykkeelle liian aikaisin ja aiheuttaa mahdollisestivedontunnetta.

EPCM-toimitustapamallin kehittäminen Kvaerner Power Oy:n voimalaitostoimituksiin

Tämän diplomityön päämääränäoli laatia suunnitelma voimalaitoksen toimittamiseksi EPCM-toimitustavalla. Työn keskeisiksi tavoitteiksi asetettiin EPCM-toimitustapaan perustuvan toimitustapakonseptin muodostaminen, toimituksiin liittyvien terminologian selkeyttäminen ja harmonisointi sekä voimalaitoksen suhteellisen kustannusrakenteen laatiminen. Työssä tutkittiin voimalaitostoimituksissa tavanomaisesti käytettyjä sopimustyyppejä, kiinteähintaista sopimusta ja kustannusvoittolisäsopimusta sekä harvinaisemmin käytettyjä kattohinta- ja tavoitekustannussopimusta. Vallitsevat toimitustavat, EPC- ja EPCM-toimitustavat sekä monitoimittajatapa, esiteltiin ja niiden vahvuudet sekä heikkoudet selvitettiin. Projektin ominaisuuksilla, markkinoilla ja tilaajan kyvyllä, asiantuntemuksella sekä resursseilla todettiin olevan vaikutusta toimitustavan valintaan. Lisäksi tehtiin katsaus voimalaitostoimitusten kehitystrendeihin ja projektin riskienhallintaan. Voimalaitoksen laitosjärjestelmäjako kehitettiin ja sitä soveltamalla määritettiin voimalaitoksen suhteellinen kustannusrakenne. Kattilaitoksen osuus voimalaitoksen rakentamiskustannuksista todettiin merkittävimmäksi. Laitosjärjestelmien laitekustannusten havaittiin olevan korkeimmat. EPCM-toimitustapamalli kehitettiin teoriaosan pohjalta ja sen rakenne, organisaatio, sopimustyypit ja -suhteetsekä toimituksen riskien jako kuvattiin. Voimalaitoksen rakentamiskustannuksia vertailtiin eri toimitustavoilla ja EPCM-toimitustapamalli todettiin EPC-toimitustapaa edullisemmaksi.

Channel Partner Program Benchmark

Tämän diplomityön tavoitteena on vertailla maailmanlaajuisen sähköalan yhtiön kanavapartneriohjelmaa yhtiön kilpailijoiden vastaaviin ohjelmiin, sekä laatia yhtiön käyttöön konkreettinen työkalu kanavapartneriohjelmien vertailua varten. Tavoitteena on myös tutkimuksessa kerätyn tiedon perusteella selvittää yhtiön kanavapartneriohjelman vahvuudet ja heikkoudet. Tässä diplomityössä tutkimusongelmaa on ensin tarkasteltu kirjallisuuden valossa, keskittyen kirjallisuuteen kilpailijavertailusta sekä jakelukanavista. Kilpailijavertailu, benchmark,on kuvattu tässä yhteydessä osana laadunhallintaa, painottaen yleisesti käytössä olevaa Campin 10 askeleen kilpailijavertailuprosessia. Tässä tutkimuksessa tarkasteltavat jakelukanavateoriat on jaoteltu kahteen osaan; jakelukanavan rakennetta käsitteleviin teorioihin sekä jakelukanavan hallintaa käsitteleviin teorioihin. Ensin mainitussa keskitytään lähinnä jakelukanavamalleihin ja -tyyppeihin, ja toisessa lähemmin partneri -käsitteeseen; kumppanuuteen, kanavapartnereihin ja kanavapartneriohjelmiin. Tavoitteena oli kerätä mahdollisimman tarkkaa ja ajankohtaista tietoa tutkimuksen kohteena olevien kilpailijayritysten kanavapartneriohjelmista. Tämä osoittautui varsin haastavaksi tehtäväksi. Tarpeeksi tietoa saatiin kuitenkin kerättyä sekä kirjallisuudesta että tehdyn kyselyn avulla, mikä mahdollisti alkuperäisenä tavoitteena olleen kilpailijavertailun sekä sen pohjalta tehdyt analyysit.

Asumisstrategian täytäntöönpano, prosessi ja kehittäminen Imatran kaupungissa

Asumisstrategia muodostaa kiinteän osan Imatran kaupungin kokonaisstrategiaa. Se laaditaan myös erillisenä strategia-asiakirjana. Tutkimuksen tavoitteena oli selvittää miten asumisstrategia toteutuu Imatran kaupungissa, mitkä tekijät tukevat asumisstrategian toteuttamista ja mitkä tekijät toimivat toteuttamisen esteinä sekämillainen asumisstrategiaprosessi on ja miten sitä voitaisiin kehittää. Tutkimus toteutettiin kvalitatiivisena tutkimuksena, jonka aineisto muodostuu asumisstrategiatyöryhmälle suunnatuista teemahaastatteluista ja käytössä olleista kaupungin strategia-asiakirjoista. Tutkimus toi esiin sen, kuinka vaikea ja monimuotoinen asumisstrategiaprosessi on sekä sen, kuinka monin eri tavoin asumisstrategiaa toteutetaan Imatran kaupungissa. Tutkimus toi esiin myös asumisstrategiaprosessiin liittyviä vahvuuksia ja heikkouksia sekä näiden, lähinnä hidasteiksi katsottavien tekijöiden poistamiseen käytettäviä kehittämiskeinoja. Tutkimuksen perusteella onnistunut strategian toteuttaminen edellyttää toimeenpanijoiden ymmärtävän strategian sisällön ja merkityksen omalle työlleen.

Organisaation uudistumiskyvyn kehittäminen, Case: Stora Enso

Tutkielman tavoitteena oli selvittää case-organisaatio Stora Enson Anjalan paperitehtaan uudistumiskyky, toiminnan strategianmukaisuus sekä vahvuudet ja kehitettävät osa-alueetuudistumiskyvyssä. Tutkielmassa käytettiin kvantitatiivista tutkimusotetta. Aineisto kerättiin kahdella eri mittarilla: KM-Factor¿ ¿ uudistumiskyvyn mittarilla ja organisaation muutoskyvyn mittarilla. KM-Factor¿ ¿mittarin avulla kerättiin tietoa organisaation suhteiden, tiedonkulun, osaamisen ja johtamisen nyky- ja tavoitetilasta erilaisissa tietoympäristöissä. Muutoskyvyn mittarin avulla kerättiin tietoa organisaation uudistumiskyvystä kuuden sitä kuvaavan ominaisuuden, strategisen kyvykkyyden, johtajuuden, ajan hyödyntämisen, verkostoituneisuuden, tiedon johtamisen ja oppimissuuntautuneisuuden perusteella. Mittaukset suoritettiin helmikuussa 2006 ja niiden kohteena oli Stora Enson Anjalan paperitehtaan koko henkilöstö. Kahden uudistumiskyvyn mittarin tulokset analysoitiin ja niitä vertailtiin keskenään. Tällä tavalla pyrittiinmyös lisäämään tutkimuksen validiteettia. Mittaustulokset purettiin sanalliseenmuotoon ja niistä raportoitiin case-organisaatiolle. Mittausten mukaan case-organisaation uudistumiskyky oli hieman keskitasoa heikompi. Toiminnan vahvuuksia olivat yksimielisyys muutostarpeista ja tilanneherkkyys. Merkittävimmät toiminnan heikkoudet löytyivät nykyisestä toimintatavasta, joka ei ollut strategian mukainen, ja innovaatiopotentiaalista, joka oli hyvin alhainen. Kehittämisen tarpeita löytyi sekä johdon että henkilöstön suhteiden ja yhteistyön osalta. Koko organisaation tulisi lisätä yhteistyötä ulkopuolisten tahojen ja sidosryhmien kanssa. Organisaatiossa tulisi miettiä, miten strategia saataisiin selkeästi viestittyä myös johtoa alemmille tasoille. Johto painotti liikaa autoritääristä johtamista, kun taas henkilöstöltä odotettaisiin enemmän vastuunottoa toiminnastaan. Organisaatiossa tulisi saada nykyistä avoimemmin ja itsenäisemmin ilmaista omia näkemyksiään, toimia aloitteellisesti ja luoda uusia ideoita toiminnan kehittämiseksi. Innovatiivisuudesta ja parannusehdotuksista tulisi myös palkita paremmin.

Simulaatiopeli menetelmänä siirtää ikääntyvien hiljaista tietoa. Case: Salon Seudun Osuuspankki

Tutkimuksen tavoitteena oli selvittää, miten simulaatiopeli soveltuu ikääntyvien työntekijöiden hiljaisen tiedon esille tuomiseen ja tiedon siirtämiseen. case - tapauksena tutkimuksessa käytettiin Salon Seudun Osuuspankissapelattua simulaatiopeliä ja tutkimustulokset perustuvat peliin osallistuneiden ko. pankin työntekijöiden näkemyksiin ja mielipiteisiin. Tutkimuksessa selvitettiin miten osallistujat kokevat simulaatiopelin tilanteena, mitkä ovat simulaatiopelin heikkoudet ja vahvuudet hiljaisen tiedon siirrossa sekä millä tavalla simulaatiopeliä tulisi käyttää siirrettäessä hiljaista tietoa. Lisäksi selvitettiin mitä hiljainen tieto pankkityössä on. Tutkimus toteutettiin teemahaastatteluin marraskuussa 2004. Tutkimuksen tuloksena selvisi, että simulaatiopeliä ei nähdä kovin käyttökelpoisena, itsenäisenä hiljaisen tiedon siirron menetelmänä. Merkittävimpinä syinä tähän on simulaatiopelin keinotekoisuus, epäaitous sekä tilanteen jännittävyys. Simulaatiopelin vahvuudeksi hiljaisen tiedon siirrossa koetaan sen erinomainen havainnollistava voima. Simulaatiopeliä voitaisiinkin kokeilla apuna hiljaisen tiedon siirrossa osana pidempää tiedon siirron prosessia.

The value of future opportunities: comparison of information technology firms and forest companies

There are several alternatives for valuing the future opportunities of firms. The traditional appraisal methods for single projects such as net present value, internalrate of return and payback rules have been criticized in recent years. It has been said that they do not take into account all growth opportunities of firms. At the company level, business valuation is traditionally based on financial and market information. Yield estimates, net worth values and market values of shares are commonly used. Naturally, all valuation methods have their own strengths and shortcomings. In the background of most estimation rules there is the idea that the future of the firms is quite clear and predictable. However, in recent times the business environment of most companies has changed to a more unpredictable direction and the effects of uncertainty have increased. There has been a growing interest in estimating the risks and values of future possibilities. The aim of the current paper is to describe the difference between the value of futureopportunities in information technology firms and forest companies, and also toanalyse the backgrounds for the observed gap.

Data-parallel computation in parallel and distributed environments

The past few decades have seen a considerable increase in the number of parallel and distributed systems. With the development of more complex applications, the need for more powerful systems has emerged and various parallel and distributed environments have been designed and implemented. Each of the environments, including hardware and software, has unique strengths and weaknesses. There is no single parallel environment that can be identified as the best environment for all applications with respect to hardware and software properties. The main goal of this thesis is to provide a novel way of performing data-parallel computation in parallel and distributed environments by utilizing the best characteristics of difference aspects of parallel computing. For the purpose of this thesis, three aspects of parallel computing were identified and studied. First, three parallel environments (shared memory, distributed memory, and a network of workstations) are evaluated to quantify theirsuitability for different parallel applications. Due to the parallel and distributed nature of the environments, networks connecting the processors in these environments were investigated with respect to their performance characteristics. Second, scheduling algorithms are studied in order to make them more efficient and effective. A concept of application-specific information scheduling is introduced. The application- specific information is data about the workload extractedfrom an application, which is provided to a scheduling algorithm. Three scheduling algorithms are enhanced to utilize the application-specific information to further refine their scheduling properties. A more accurate description of the workload is especially important in cases where the workunits are heterogeneous and the parallel environment is heterogeneous and/or non-dedicated. The results obtained show that the additional information regarding the workload has a positive impact on the performance of applications. Third, a programming paradigm for networks of symmetric multiprocessor (SMP) workstations is introduced. The MPIT programming paradigm incorporates the Message Passing Interface (MPI) with threads to provide a methodology to write parallel applications that efficiently utilize the available resources and minimize the overhead. The MPIT allows for communication and computation to overlap by deploying a dedicated thread for communication. Furthermore, the programming paradigm implements an application-specific scheduling algorithm. The scheduling algorithm is executed by the communication thread. Thus, the scheduling does not affect the execution of the parallel application. Performance results achieved from the MPIT show that considerable improvements over conventional MPI applications are achieved.

Theoretical Analysis and Simulations of Vertically Vibrated Granular Materials

The dynamical properties ofshaken granular materials are important in many industrial applications where the shaking is used to mix, segregate and transport them. In this work asystematic, large scale simulation study has been performed to investigate the rheology of dense granular media, in the presence of gas, in a three dimensional vertical cylinder filled with glass balls. The base wall of the cylinder is subjected to sinusoidal oscillation in the vertical direction. The viscoelastic behavior of glass balls during a collision, have been studied experimentally using a modified Newton's Cradle device. By analyzing the results of the measurements, using numerical model based on finite element method, the viscous damping coefficient was determinedfor the glass balls. To obtain detailed information about the interparticle interactions in a shaker, a simplified model for collision between particles of a granular material was proposed. In order to simulate the flow of surrounding gas, a formulation of the equations for fluid flow in a porous medium including particle forces was proposed. These equations are solved with Large Eddy Simulation (LES) technique using a subgrid-model originally proposed for compressible turbulent flows. For a pentagonal prism-shaped container under vertical vibrations, the results show that oscillon type structures were formed. Oscillons are highly localized particle-like excitations of the granular layer. This self-sustaining state was named by analogy with its closest large-scale analogy, the soliton, which was first documented by J.S. Russell in 1834. The results which has been reportedbyBordbar and Zamankhan(2005b)also show that slightly revised fluctuation-dissipation theorem might apply to shaken sand, which appears to be asystem far from equilibrium and could exhibit strong spatial and temporal variations in quantities such as density and local particle velocity. In this light, hydrodynamic type continuum equations were presented for describing the deformation and flow of dense gas-particle mixtures. The constitutive equation used for the stress tensor provides an effective viscosity with a liquid-like character at low shear rates and a gaseous-like behavior at high shear rates. The numerical solutions were obtained for the aforementioned hydrodynamic equations for predicting the flow dynamics ofdense mixture of gas and particles in vertical cylindrical containers. For a heptagonal prism shaped container under vertical vibrations, the model results were found to predict bubbling behavior analogous to those observed experimentally. This bubbling behavior may be explained by the unusual gas pressure distribution found in the bed. In addition, oscillon type structures were found to be formed using a vertically vibrated, pentagonal prism shaped container in agreement with computer simulation results. These observations suggest that the pressure distribution plays a key rolein deformation and flow of dense mixtures of gas and particles under vertical vibrations. The present models provide greater insight toward the explanation of poorly understood hydrodynamic phenomena in the field of granular flows and dense gas-particle mixtures. The models can be generalized to investigate the granular material-container wall interactions which would be an issue of high interests in the industrial applications. By following this approach ideal processing conditions and powder transport can be created in industrial systems.

Product Platform Development from the Product Lines' Perspective: Case of Switching Platform

In the era of fast product development and customized product requirements, the concept of product platform has proven its power in practice. The product platform approach has enabledcompanies to increase the speed of product introductions while simultaneously benefit from efficiency and effectiveness in the development and production activities. The product platforms are technological bases, which can be used to develop several derivative products, and hence, the differentiation can be pushed closer to the product introduction. The product platform development has some specific features, which differ somewhat from the product development of single products. The time horizon is longer, since the product platform¿slife cycle is longer than individual product's. The long time-horizon also proposes higher market risks and the use of new technologies increases the technological risks involved. The end-customer interface might be far away, but there is not a lack of needs aimed at the product platforms ¿ in fact, the product platform development is very much balancing between the varying needs set to it by thederivative products. This dissertation concentrated on product platform development from the internal product lines' perspective of a singlecase. Altogether six product platform development factors were identified: 'Strategic and business fit of product platform', 'Project communication and deliverables', 'Cooperation with product platform development', 'Innovativeness of product platform architecture and features', 'Reliability and quality of product platform', and 'Promised schedules and final product platform meeting the needs'. From the six factors, three were found to influence quite strongly the overall satisfaction, namely 'Strategic and business fit of product platform', 'Reliability and quality of product platform', and 'Promised schedules and final product platform meeting the needs'. Hence, these three factors might be the ones a new product platform development unit should concentrate first in order to satisfy their closest customers, the product lines. The 'Project communication and deliverables' and 'Innovativeness of product platform architecture and features' were weaker contributors to the overall satisfaction. Overall, the factors explained quite well the satisfaction of the product lines with product platform development. Along the research, several interesting aspects about the very basic nature of the product platform development were found. The long time horizon of the product platform development caused challenges in the area of strategic fIT - a conflict between the short-term requirements and long term needs. The fact that a product platform was used as basis of several derivative products resulted into varying needs, and hence the match with the needs and the strategies. The opinions, that the releases of the larger product lines were given higher priorities, give an interesting contribution to the strategy theory of powerand politics. The varying needs of the product lines, the strengths of them as well as large number of concurrent releases set requirements to prioritization. Hence, the research showed the complicated nature of the product platform development in the case unIT - the very basic nature of the product platform development might be its strength (gaining efficiency and effectiveness in product development and product launches) but also the biggest challenge (developing products to meet several needs). As a single case study, the results of this research are not directly generalizable to all the product platform development activities. Instead, the research serves best as a starting point for additional research as well as gives some insights about the factors and challengesof one product development unit.

A Study on Fractionation and Ultrafiltration of Proteins with Characterized Modified and Unmodified Membranes

Membrane filtration has become increasingly attractive in the processing of both foodand biotechnological products. However, the poor selectivity of the membranes and fouling are the critical factors limiting the development of UF systems for the specific fractionation of protein mixtures. This thesis gives an overview on fractionation of proteins from model protein solutions or from biological solutions. An attempt was made to improve the selectivity of the available membranes by modifying the membranes and by exploiting the different electrostatic interactions between the proteins and the membrane pore surfaces. Fractionation and UF behavior of proteins in the model solutions and in the corresponding biological solutions were compared. Characterization of the membranes and protein adsorptionto the membrane were investigated with combined flux and streaming potential studies. It has been shown that fouling of the membranes can be reduced using "self-rejecting" membranes at pH values where electrostatic repulsion is achieved between the membrane and the proteins in solution. This effect is best shown in UF of dilute single protein solutions at low ionic strengths and low pressures. Fractionation of model proteins in single, binary, and ternary solutionshas been carried out. The results have been compared to the results obtained from fractination of biological solutions. It was generally observed that fractination of proteins from biological solutions are more difficult to carry out owingto the presence of non studied protein components with different properties. Itcan be generally concluded that it is easier to enrich the smaller protein in the permeate but it is also possible to enrich the larger protein in the permeateat pH values close to the isoelectric point of the protein. It should be possible to find an optimal flux and modification to effectively improve the fractination of proteins even with very similar molar masses.

Gas-liquid mass transfer in bubbly flow: Estimation of mass transfer, bubble size and reactor performance in various applications

Gas-liquid mass transfer is an important issue in the design and operation of many chemical unit operations. Despite its importance, the evaluation of gas-liquid mass transfer is not straightforward due to the complex nature of the phenomena involved. In this thesis gas-liquid mass transfer was evaluated in three different gas-liquid reactors in a traditional way by measuring the volumetric mass transfer coefficient (kLa). The studied reactors were a bubble column with a T-junction two-phase nozzle for gas dispersion, an industrial scale bubble column reactor for the oxidation of tetrahydroanthrahydroquinone and a concurrent downflow structured bed.The main drawback of this approach is that the obtained correlations give only the average volumetric mass transfer coefficient, which is dependent on average conditions. Moreover, the obtained correlations are valid only for the studied geometry and for the chemical system used in the measurements. In principle, a more fundamental approach is to estimate the interfacial area available for mass transfer from bubble size distributions obtained by solution of population balance equations. This approach has been used in this thesis by developing a population balance model for a bubble column together with phenomenological models for bubble breakage and coalescence. The parameters of the bubble breakage rate and coalescence rate models were estimated by comparing the measured and calculated bubble sizes. The coalescence models always have at least one experimental parameter. This is because the bubble coalescence depends on liquid composition in a way which is difficult to evaluate using known physical properties. The coalescence properties of some model solutions were evaluated by measuring the time that a bubble rests at the free liquid-gas interface before coalescing (the so-calledpersistence time or rest time). The measured persistence times range from 10 msup to 15 s depending on the solution. The coalescence was never found to be instantaneous. The bubble oscillates up and down at the interface at least a coupleof times before coalescence takes place. The measured persistence times were compared to coalescence times obtained by parameter fitting using measured bubble size distributions in a bubble column and a bubble column population balance model. For short persistence times, the persistence and coalescence times are in good agreement. For longer persistence times, however, the persistence times are at least an order of magnitude longer than the corresponding coalescence times from parameter fitting. This discrepancy may be attributed to the uncertainties concerning the estimation of energy dissipation rates, collision rates and mechanisms and contact times of the bubbles.

Maximizing Benefits in Information Technology Outsourcing

Information Technology (IT) outsourcing has traditionally been seen as a means to acquire newresources and competencies to perform standard tasks at lowered cost. This dissertationchallenges the thought that outsourcing should be limited to non-strategic systems andcomponents, and presents ways to maximize outsourcing enabled benefits while minimizingassociated risks. In this dissertation IT outsourcing is approached as an efficiency improvement and valuecreationprocess rather than a sourcing decision. The study focuses on when and how tooutsource information technology, and presents a new set of critical success factors foroutsourcing project management. In a case study it re-validates the theory-based propositionthat in certain cases and situations it is beneficial to partly outsource also strategic IT systems. The main contribution of this dissertation is the validation of proposal that in companies wherethe level of IT competency is high, managerial support established and planning processes welldefined,it is possible to safely outsource also business critical IT systems. A model describing the critical success factors in such cases is presented based on existing knowledge on the fieldand the results of empirical study. This model further highlights the essence of aligning IT andbusiness strategies, assuming long-term focus on partnering, and the overall target ofoutsourcing to add to the strengths of the company rather than eliminating weaknesses.

Modeling and measuring organizational renewal capability

Globalization and new information technologies mean that organizations have to face world-wide competition in rapidly transforming, unpredictable environments, and thus the ability to constantly generate novel and improved products, services and processes has become quintessential for organizational success. Performance in turbulent environments is, above all, influenced by the organization's capability for renewal. Renewal capability consists of the ability of the organization to replicate, adapt, develop and change its assets, capabilities and strategies. An organization with a high renewal capability can sustain its current success factors while at the same time building new strengths for the future. This capability does not only mean that the organization is able to respond to today's challenges and to keep up with the changes in its environment, but also that it can actas a forerunner by creating innovations, both at the tactical and strategic levels of operation and thereby change the rules of the market. However, even though it is widely agreed that the dynamic capability for continuous learning, development and renewal is a major source of competitive advantage, there is no widely shared view on how organizational renewal capability should be defined, and the field is characterized by a plethora of concepts and definitions. Furthermore,there is a lack of methods for systematically assessing organizational renewal capability. The dissertation aims to bridge these gaps in the existing research by constructing an integrative theoretical framework for organizational renewal capability and by presenting a method for modeling and measuring this capability. The viability of the measurement tool is demonstrated in several contexts, andthe framework is also applied to assess renewal in inter-organizational networks. In this dissertation, organizational renewal capability is examined by drawing on three complimentary theoretical perspectives: knowledge management, strategic management and intellectual capital. The knowledge management perspective considers knowledge as inherently social and activity-based, and focuses on the organizational processes associated with its application and development. Within this framework, organizational renewal capability is understood as the capacity for flexible knowledge integration and creation. The strategic management perspective, on the other hand, approaches knowledge in organizations from the standpoint of its implications for the creation of competitive advantage. In this approach, organizational renewal is framed as the dynamic capability of firms. The intellectual capital perspective is focused on exploring how intangible assets can be measured, reported and communicated. From this vantage point, renewal capability is comprehended as the dynamic dimension of intellectual capital, which consists of the capability to maintain, modify and create knowledge assets. Each of the perspectives significantly contributes to the understanding of organizationalrenewal capability, and the integrative approach presented in this dissertationcontributes to the individual perspectives as well as to the understanding of organizational renewal capability as a whole.

Ash Particle Erosion on Steam Boiler Convective Section

In this study, equations for the calculation of erosion wear caused by ash particles on convective heat exchanger tubes of steam boilers are presented. Anew, three-dimensional test arrangement was used in the testing of the erosion wear of convective heat exchanger tubes of steam boilers. When using the sleeve-method, three different tube materials and three tube constructions could be tested. New results were obtained from the analyses. The main mechanisms of erosionwear phenomena and erosion wear as a function of collision conditions and material properties have been studied. Properties of fossil fuels have also been presented. When burning solid fuels, such as pulverized coal and peat in steam boilers, most of the ash is entrained by the flue gas in the furnace. In bubbling andcirculating fluidized bed boilers, particle concentration in the flue gas is high because of bed material entrained in the flue gas. Hard particles, such as sharp edged quartz crystals, cause erosion wear when colliding on convective heat exchanger tubes and on the rear wall of the steam boiler. The most important ways to reduce erosion wear in steam boilers is to keep the velocity of the flue gas moderate and prevent channelling of the ash flow in a certain part of the cross section of the flue gas channel, especially near the back wall. One can do this by constructing the boiler with the following components. Screen plates can beused to make the velocity and ash flow distributions more even at the cross-section of the channel. Shield plates and plate type constructions in superheaters can also be used. Erosion testing was conducted with three types of tube constructions: a one tube row, an inline tube bank with six tube rows, and a staggered tube bank with six tube rows. Three flow velocities and two particle concentrations were used in the tests, which were carried out at room temperature. Three particle materials were used: quartz, coal ash and peat ash particles. Mass loss, diameter loss and wall thickness loss measurements of the test sleeves were taken. Erosion wear as a function of flow conditions, tube material and tube construction was analyzed by single-variable linear regression analysis. In developing the erosion wear calculation equations, multi-variable linear regression analysis was used. In the staggered tube bank, erosion wear had a maximum value in a tube row 2 and a local maximum in row 5. In rows 3, 4 and 6, the erosion rate was low. On the other hand, in the in-line tube bank the minimum erosion rate occurred in tube row 2 and in further rows the erosion had an increasing value, so that in a six row tube bank, the maximum value occurred in row 6.