Managerial decision-making style : India, Bangladesh, and Finland : cultural side of the game

Julkaisumaa Intia 356 IN IND

Side peaks in Nb and NbTi point-contact spectra

Superconductor – normal metal point contacts were investigated, using different combinations of Cu, brass, Nb and NbTi. The resulting spectra contained side peaks. The currents at which these side peaks appeared, depended on the radii of the contacts. For contacts with Nb this dependence was quadratic, while for contacts with NbTi it was linear. Based on this, we argue that the side peaks in the case of the Nb contacts are due to the critical current density being exceeded. In contrast, side peaks of the NbTi contacts are caused by the self-magnetic field exceeding the lower critical field of NbTi. The NbTi contacts did not show the expected contribution from the vanishing Maxwell resistance of the superconductor, a question which remained open.

Treatment of NI-containing acidic mine waters with calcite side-stones

Acid mine drainage (AMD) presents a serious problem for the environment for the massive formation of acidic leachates containing heavy metals. The present work deals with the AMD treatment using neutralizing limestone side-products. The conventional methods for prevention, mitigating and control of AMD formation are described. The experimental testing of Nordkalk Oy calcite-containing side-stones for acid neutralizing and removal of nickel from solutions presents the research objective. The batch experiments in acid neutralizing with subsequent metal content analysis were carried out. The results showed the dependence of pH on the dose of neutralizing material and the exposure time. The nickel removal, unlike iron, within the pH range from 1.2 to 6.0 appeared to be inadequate. The further research on nickel co-precipitation with iron and aluminium may appear to be necessary together with testing of alkalinity strengthening materials.

Greenhouse gas emissions from peat and biomass-derived fuels, electricity and heat — Estimation of various production chains by using LCA methodology

More discussion is required on how and which types of biomass should be used to achieve a significant reduction in the carbon load released into the atmosphere in the short term. The energy sector is one of the largest greenhouse gas (GHG) emitters and thus its role in climate change mitigation is important. Replacing fossil fuels with biomass has been a simple way to reduce carbon emissions because the carbon bonded to biomass is considered as carbon neutral. With this in mind, this thesis has the following objectives: (1) to study the significance of the different GHG emission sources related to energy production from peat and biomass, (2) to explore opportunities to develop more climate friendly biomass energy options and (3) to discuss the importance of biogenic emissions of biomass systems. The discussion on biogenic carbon and other GHG emissions comprises four case studies of which two consider peat utilization, one forest biomass and one cultivated biomasses. Various different biomass types (peat, pine logs and forest residues, palm oil, rapeseed oil and jatropha oil) are used as examples to demonstrate the importance of biogenic carbon to life cycle GHG emissions. The biogenic carbon emissions of biomass are defined as the difference in the carbon stock between the utilization and the non-utilization scenarios of biomass. Forestry-drained peatlands were studied by using the high emission values of the peatland types in question to discuss the emission reduction potential of the peatlands. The results are presented in terms of global warming potential (GWP) values. Based on the results, the climate impact of the peat production can be reduced by selecting high-emission-level peatlands for peat production. The comparison of the two different types of forest biomass in integrated ethanol production in pulp mill shows that the type of forest biomass impacts the biogenic carbon emissions of biofuel production. The assessment of cultivated biomasses demonstrates that several selections made in the production chain significantly affect the GHG emissions of biofuels. The emissions caused by biofuel can exceed the emissions from fossil-based fuels in the short term if biomass is in part consumed in the process itself and does not end up in the final product. Including biogenic carbon and other land use carbon emissions into the carbon footprint calculations of biofuel reveals the importance of the time frame and of the efficiency of biomass carbon content utilization. As regards the climate impact of biomass energy use, the net impact on carbon stocks (in organic matter of soils and biomass), compared to the impact of the replaced energy source, is the key issue. Promoting renewable biomass regardless of biogenic GHG emissions can increase GHG emissions in the short term and also possibly in the long term.

Relationaalinen itseys ja sosiaalinen side teoriassa ja empiriassa

Kirjallisuusarvostelu

Kysyntä-toimitusketjun synkronointi epävarman kysynnän ja tarjonnan toimintaympäristössä

Kysynnän ja tarjonnan epävarmuudet ovat nykyisin arkipäivää useilla toimialoilla. Elämme epävarmuuden suhteen ennen näkemättömiä aikoja, minkä on arvioitu jatkuvan myös tulevaisuudessa. Yritysten tilauskannat ovat lyhyitä, ja tilaukset viivästyvät tai peruuntuvat kokonaan. Toisaalta tarjonnan epävarmuudet aiheuttavat asiakasyrityksille haasteita esimerkiksi toimitusmyöhästymisten muodossa. Tuotannon ollessa hajaantunut verkostoihin yksittäisten yritysten toiminta ja päätökset vaikuttavat toisten verkostoyritysten toimintaan. Tämän takia epävarmuuden aiheuttamista muutoksista ja poikkeamista tulisi tiedottaa kumppaniyrityksiä, jotta kaikki pysyisivät samalla kellotaajuudella. Operatiivisen ja taktisen tiedon jakaminen on nykyisissä toimitusketjuissa jo arkipäivää, mutta yritysten välisistä rajapinnoista löytyy edelleen kehitettävää. Riittävästä ei kiinnitetä huomiota vastaanottajan kykyyn ja tapaan hyödyntää informaatiota – varsinkaan muutostilanteissa. Ajan/nopeuden ollessa yhä tärkeämpi kilpailutekijä informaation ajoituksella on kriittinen merkitys kysyntä-toimitusketjujen kokonaissuorituskykyyn. Toisin sanoen, millä ajanhetkellä tietoa tulisi jakaa, jotta kumppani pystyisi hyödyntämään saamaansa tietoa mahdollisimman hyvin. Kysyntä-toimitusketjun synkronoinnilla tarkoitetaan tässä väitöstutkimuksessa nimenomaan aikatekijään keskittymistä yritysten välisessä päätöksenteossa ja informaation jakamisessa toimitusketjun kokonaissuorituskyvyn parantamiseksi. Tutkimus kytkeytyy toimitusketjukoordinoinnin tieteelliseen keskusteluun. Koordinointiteorian keskeinen osa ovat riippuvuussuhteet, joita johdetaan koordinointimekanismien avulla. Kysyntätoimitusketjun synkronointia on mallinnettu aikaisemmin VOP-OPP-mallin (Value Offering Point – Order Penetration Point) ja sen johdannaisten avulla. Näissä malleissa asiakasyrityksen kysyntäketju ja toimittajayrityksen toimitusketju ovat keskinäisessä riippuvuussuhteessa, jota johdetaan päätöksenteon synkronoinnin ja informaation jakamisen koordinointimekanismeilla. VOP-OPP-malli johdannaisineen eivät kuitenkaan huomioi epävarman toimintaympäristön vaikutuksia synkronointiin. Näissä malleissa informaation ainoana laatudimensiona tarkasteltava aikatekijä on liian kapea-alainen näkökulma synkronointiin epävarmassa ympäristössä. Lisäksi nämä mallit keskittyvät vain yksisuuntaiseen, kysyntälähtöiseen, synkronointiin jättäen huomioimatta tarjontalähtöisen synkronoinnin. Aikatekijä- ja kokonaissuorituskykypainotustensa takia VOP-OPP-malli tarjosi kuitenkin hyvän lähtöfilosofian uusien synkronointimallien kehittämiseen. Väitöstutkimus toteutettiin hypoteettis-deduktiivisena tapaustutkimuksena, jossa ensin luotiin kirjallisuuden perusteella uudet teoreettiset synkronointimalliehdotukset. Tämän jälkeen ehdotusten toimivuutta arvioitiin käytännön kysyntä-toimitusketjuissa. Tutkimuksen uutuusarvo liittyy kysyntä-toimitusketjun synkronoinnin keskeisten piirteiden systeemiseen mallintamiseen epävarmassa toimintaympäristössä. Kontribuutiona esitetään kysyntä-toimitusketjun synkronoinnin moniulotteinen kokonaismalli, joka sisältää koordinointimekanismeina päätöksenteon synkronoinnin, informaation läpinäkyvyyden sekä asiakas- ja toimittajapään joustot. Tiedon vaihtoa mallissa tarkastellaan kaksisuuntaisesti – kysyntä- ja tarjontalähtöisesti. Informaation laatudimensioina mallissa ovat informaation ajoitus, luotettavuus ja tarkkuus. Kokonaismalli sisältää kolme alimallia: Demand Visibility Point – Demand Penetration Point (DVP-DPP) on kysyntälähtöisen synkronoinnin malli, Supply Visibility Point – Supply Information Penetration Point (SVP-SIPP) on tarjontalähtöisen synkronoinnin malli ja Integroitu DVP-DPP - SVP-SIPP-malli kytkee edellä mainitut mallit toisiinsa. Näissä alimalleissa informaation eri luokkia ovat tilausta edeltävä, tilaukseen liittyvä, tilauksen jälkeinen ja sovitun toimitusajankohdan jälkeinen kysyntä- ja tarjontatieto. Käytännön hyödyntämisen näkökulmasta mallit toimivat ns. mentaalitason koordinointimekanismeina, joiden tarkoitus on herättää toimitusketjukumppanit tavoittelemaan kokonaissuorituskyvyn parantamista oman edun tavoittelemisen sijasta. Tutkimuksen päärajoitteena on sen keskittyminen ainoastaan kahdenvälisiin yhteistyösuhteisiin, mikä tarjoaa nykyisessä verkostoituneessa toimintaympäristössä varsin kapean kuvan käytännön synkronointihaasteisiin.

Working Capital Management Model in value chains

The objective of this Master’s thesis is to create a calculation model for working capital management in value chains. The study has been executed using literature review and constructive research methods. Constructive research methods were mainly modeling. The theory in this thesis is founded in research articles and management literature. The model is developed for students and researchers. They can use the model for working capital management and comparing firms to each other. The model can also be used to cash management. The model tells who benefits and who suffers most in the value chain. Companies and value chains cash flows can be seen. By using the model can be seen are the set targets really achieved. The amount of operational working capital can be observed. The model enables user to simulate the amount of working capital. The created model is based on cash conversion cycle, return on investment and cash flow forecasting. The model is tested with carefully considered figures which seem to be though realistic. The modeled value chain is literally a chain. Implementing this model requires from the user that he/she have some kind of understanding about working capital management and some figures from balance sheet and income statement. By using this model users can improve their knowledge about working capital management in value chains.

Supplier codes of conduct: Acting responsibly in global supply chains

Nowadays the Western companies are considered responsible for the social and environmental issues in their whole supply chains. To influence the practices of their suppliers the Western companies have created suppliers codes of conduct (SCCs) which express their requirements. Suppliers’ compliance with the SCCs is checked through audits. The purpose of this thesis is to analyze SCCs as a means for Western companies to ensure socially and environmentally responsible actions in their global supply chains, and the sub-objectives are to find out 1) how well do the SCCs and their auditing work at suppliers’ production sites and 2) how can possible problems related to SCCs and their auditing be solved. This is a qualitative research carried out in the form of a case study with two case companies. In this study both primary and secondary data is used. The primary data is collected in the form of interviews of the case company representatives and three external experts. Based on a theoretical framework of previous research in the fields of corporate social responsibility and supply chain management, a model with eleven factors, which influence the success of SCC implementation and the auditing of SCC –implementation, is drafted. Also several different best-practices to help to solve and avoid possible problems related to SCC -implementation and auditing have been identified from previous research. Based on the findings of this study the theoretical model has been updated adding two new influential factors. It seems that how well the SCC and its auditing work at suppliers’ production sites depends on the joint effect of thirteen influential factors: buyer’s purchasing policy, supplier’s motivation, buyer’s commitment, the solving of agency problems, the contents of the SCC, supplier’s role and the buyer-supplier –relationship, complexity of supply chain, the limitations of the smaller buyers, cooperation through a business association or multi-stakeholder system, the role of supplier’s employees, SCC –related communication and supplier’s understanding, cheating in audits and the auditors. The possible problems related to SCCs and their auditing can be solved by adopting best-practices. Nine of the theoretical best-practices stand out from the findings of this study: 1) two-way communication and collecting feedback from suppliers, 2) the philosophy of continuous improvement, 3) long-term business relationships with the supplier, 4) informing the supplier about the advantages of SCC –compliance, 5) rewarding code-compliant suppliers, 6) building collaborative, good buyer-supplier relationships, 7) supporting and advising the supplier, 8) joining a business association or multi-stakeholder system and 9) interviewing supplier’s employees as a part of the audits.

Treatment of Fe-containing Acid Mine Waters in Fixed Bed Adsorption Column with Calcite Side-Stone

The acid mining drainage is considered the most significant environmental pollution problem around the world for the extensive formation acidic leachates containing heavy metals. Adsorption is widely used methods in water treatment due to it easy operation and the availability of a wide variety of commercial adsorbent (low cost). The primary goal of this thesis was to investigate the efficiency of neutralizing agents, CaCO3 and CaSiO3, and metal adsorption materials with unmodified limestone from Company Nordkalk Oy. In addition to this, the side materials of limestone mining were tested for iron adsorption from acidic model solution. This study was executed at Lappeenranta University of Technology, Finland. The work utilised fixed-bed adsorption column as the main equipment and large fluidized column. Atomic absorption spectroscopy (AAS) and x-ray diffraction (XRD) was used to determine ferric removal and the composition of material respectively. The results suggest a high potential for the studied materials to be used a low cost adsorbents in acid mine drainage treatment. From the two studied adsorbents, the FS material was more suitable than the Gotland material. Based on the findings, it is recommended that further studies might include detailed analysis of Gotland materials.

Evaluating land-use related environmental impacts of biomass value chains for decision-support : Comparison and testing of methodologies proposed for environmental life cycle assessment

Life cycle assessment (LCA) is one of the most established quantitative tools for environmental impact assessment of products. To be able to provide support to environmentally-aware decision makers on environmental impacts of biomass value-chains, the scope of LCA methodology needs to be augmented to cover landuse related environmental impacts. This dissertation focuses on analysing and discussing potential impact assessment methods, conceptual models and environmental indicators that have been proposed to be implemented into the LCA framework for impacts of land use. The applicability of proposed indicators and impact assessment frameworks is tested from practitioners' perspective, especially focusing on forest biomass value chains. The impacts of land use on biodiversity, resource depletion, climate change and other ecosystem services is analysed and discussed and the interplay in between value choices in LCA modelling and the decision-making situations to be supported is critically discussed. It was found out that land use impact indicators are necessary in LCA in highlighting differences in impacts from distinct land use classes. However, many open questions remain on certainty of highlighting actual impacts of land use, especially regarding impacts of managed forest land use on biodiversity and ecosystem services such as water regulation and purification. The climate impact of energy use of boreal stemwood was found to be higher in the short term and lower in the long-term in comparison with fossil fuels that emit identical amount of CO2 in combustion, due to changes implied to forest C stocks. The climate impacts of energy use of boreal stemwood were found to be higher than the previous estimates suggest on forest residues and stumps. The product lifetime was found to have much higher influence on the climate impacts of woodbased value chains than the origin of stemwood either from thinnings or final fellings. Climate neutrality seems to be likely only in the case when almost all the carbon of harvested wood is stored in long-lived wooden products. In the current form, the land use impacts cannot be modelled with a high degree of certainty nor communicated with adequate level of clarity to decision makers. The academia needs to keep on improving the modelling framework, and more importantly, clearly communicate to decision-makers the limited certainty on whether land-use intensive activities can help in meeting the strict mitigation targets we are globally facing.

Developing short sea shipping transportation chains at Helsinki-Tallinn route

Short sea shipping is an important part of the European economy and an alternative to road transport of goods in Europe. It represents an intermodal transport combination of sea and land on a Door-to-Door basis, and it aims to develop more sustainable transport network with the least negative impacts by the transport modes. This Master’s thesis addresses the development of short sea shipping transportation chains at Helsinki-Tallinn route. The Master´s thesis explores the development of short sea shipping at Helsinki-Tallinn route by analyzing the shipping costs per unit transported by different ship types and sizes between port of Helsinki-Vuosaari harbour and port of Tallinn-Muuga harbour, and examining the possibility of Ro-Ro traffic as well. The study is qualitative-quantitative method and it is based on a case study, data is collected from secondary and primary sources, and mixed methods analysis is used to implement the interviews and observations results with the databases analysis. In the thesis factors affecting on short sea shipping are explored and analyzed, also the possibility of Ro-Ro shipping is examined, by comparing the shipping cost and the environmental impact of different ships like container ships, Ropax, and CONRO ships. The finding of this research shows the importance of time at port and utilization as a shipping cost determinants, the relationship between ship type and costing, and the possibility of Ro-Ro shipping.

Effects of Fin Parameters on Gas-Side Heat Transfer Performance of H-Type Finned Tube Bundle in a Waste Heat Recovery Boiler

Alfa Laval Aalborg Oy designs and manufactures waste heat recovery systems utilizing extended surfaces. The waste heat recovery boiler considered in this thesis is a water-tube boiler where exhaust gas is used as the convective heat transfer medium and water or steam flowing inside the tubes is subject to cross-flow. This thesis aims to contribute to the design of waste heat recovery boiler unit by developing a numerical model of the H-type finned tube bundle currently used by Alfa Laval Aalborg Oy to evaluate the gas-side heat transfer performance. The main objective is to identify weaknesses and potential areas of development in the current H-type finned tube design. In addition, numerical simulations for a total of 15 cases with varying geometric parameters are conducted to investigate the heat transfer and pressure drop performance dependent on H-type fin geometry. The investigated geometric parameters include fin width and height, fin spacing, and fin thickness. Comparison between single and double tube type configuration is also conducted. Based on the simulation results, the local heat transfer and flow behaviour of the H-type finned tube is presented including boundary layer development between the fins, the formation of recirculation zone behind the tubes, and the local variations of flow velocity and temperature within the tube bundle and on the fin surface. Moreover, an evaluation of the effects of various fin parameters on heat transfer and pressure drop performance of H-type finned tube bundle has been provided. It was concluded that from the studied parameters fin spacing and fin width had the most significant effect on tube bundle performance and the effect of fin thickness was the least important. Furthermore, the results suggested that the heat transfer performance would increase due to enhanced turbulence if the current double tube configuration is replaced with single tube configuration, but further investigation and experimental measurements are required in order to validate the results.

Value creation in intelligent packaging value chains

The goal of this thesis is to look for and point out problems and bottlenecks related to value chains and networks in initiation and implementation of intelligent packaging. The research is based on interviews in different case companies and is qualitative by nature. The interview results are examined through a framework built upon relevant theory, with the aim to present a useful recommendation for a supplier company for advancing intelligent packaging business. The perspective that is attained through the research questions demonstrates the potential customer companies’ views of possibilities and problems. The key results suggest that intellectual property of relevant products is in an important position from the customers’ perspective. If the supplier does not own a product technology, a sufficiently large company can consider working as an integrator in a network where smaller companies make use of a compiled offering from other smaller actors. The foundation for these networks and company relationships is value creation, which has to be based on profound customer knowledge and research. The framework that is created for this study builds upon earlier research to provide a model that better serves intelligent packaging implementation and includes the notion of importance of value proposition and continuous value co-creation.