Improving Cross Direction Basis Weight Profile in a Fourdrinier Paper Machine

The purpose of this study was to improve PM7’s basis weight CD profile in Stora Enso’s Berghuizer mill and to search mechanical defects which affect to the formation of the basis weight CD profile. In the theoretical part PM7’s structure was presented and the formation of the basis weight and caliper CD profiles was examined as well as disturbances which are affecting to the formation. The function of the control system was scrutinised for the side of CD profiles as well as the formation of the measured CD profiles. Tuning of the control system was examined through the response model and filtering. Specification of the response model and filtering was explained and how to determine 2sigma statistical number. In the end of the theoretical part ATPA hardware and a new profile browser were introduced. In the experimental part focus was in the beginning to search and remove mechanical defects which are affecting to CD profiles. The next step was to verify the reliability of the online measurements, to study the stability of the basis weight CD profile and to find out so called fingerprint, a basis weight CD profile which is unique for each paper machine. New response model and filtering value for basis weight CD profile was determined by bump tests. After a follow up period the affect of the new response model and filtering was analysed.

Developing a Comprehensive Model for Marketing Planning — Combining the Major Approaches

Mix marketing and relationships marketing are two major approaches that often form a basis for organizational marketing planning. The superiority of these approaches has been debated for long without any rational conclusion. Lately there have been studies indicating that both of the major approaches are many times used side by side in marketing planning. There have been also studies suggesting that even combining the mix marketing and relationship marketing approaches might be possible. The aim of this thesis is to provide knowledge about the usage of mix marketing and relationship marketing approaches in organizations and possibilities in combining the approaches. Also a settlement of strengths, weaknesses and risks of combining is intended to provide. The objectives were met through the literature and a case study research. In the case study, interviews were conducted in order to gain a deeper knowledge about marketing planning in various organizations. Based on this study, the combining of the major marketing approaches will be possible and even recommended when keeping in mind few aspects which might cause some troubles in the combining process.

APROS model validation in case of fast transients in a boiling water reactor

This Master´s thesis investigates the performance of the Olkiluoto 1 and 2 APROS model in case of fast transients. The thesis includes a general description of the Olkiluoto 1 and 2 nuclear power plants and of the most important safety systems. The theoretical background of the APROS code as well as the scope and the content of the Olkiluoto 1 and 2 APROS model are also described. The event sequences of the anticipated operation transients considered in the thesis are presented in detail as they will form the basis for the analysis of the APROS calculation results. The calculated fast operational transient situations comprise loss-of-load cases and two cases related to a inadvertent closure of one main steam isolation valve. As part of the thesis work, the inaccurate initial data values found in the original 1-D reactor core model were corrected. The input data needed for the creation of a more accurate 3-D core model were defined. The analysis of the APROS calculation results showed that while the main results were in good accordance with the measured plant data, also differences were detected. These differences were found to be caused by deficiencies and uncertainties related to the calculation model. According to the results the reactor core and the feedwater systems cause most of the differences between the calculated and measured values. Based on these findings, it will be possible to develop the APROS model further to make it a reliable and accurate tool for the analysis of the operational transients and possible plant modifications.

Reflexive Space. A Constructionist Model of the Russian Reflexive Marker

This study examines the structure of the Russian Reflexive Marker ( ся/-сь) and offers a usage-based model building on Construction Grammar and a probabilistic view of linguistic structure. Traditionally, reflexive verbs are accounted for relative to non-reflexive verbs. These accounts assume that linguistic structures emerge as pairs. Furthermore, these accounts assume directionality where the semantics and structure of a reflexive verb can be derived from the non-reflexive verb. However, this directionality does not necessarily hold diachronically. Additionally, the semantics and the patterns associated with a particular reflexive verb are not always shared with the non-reflexive verb. Thus, a model is proposed that can accommodate the traditional pairs as well as for the possible deviations without postulating different systems. A random sample of 2000 instances marked with the Reflexive Marker was extracted from the Russian National Corpus and the sample used in this study contains 819 unique reflexive verbs. This study moves away from the traditional pair account and introduces the concept of Neighbor Verb. A neighbor verb exists for a reflexive verb if they share the same phonological form excluding the Reflexive Marker. It is claimed here that the Reflexive Marker constitutes a system in Russian and the relation between the reflexive and neighbor verbs constitutes a cross-paradigmatic relation. Furthermore, the relation between the reflexive and the neighbor verb is argued to be of symbolic connectivity rather than directionality. Effectively, the relation holding between particular instantiations can vary. The theoretical basis of the present study builds on this assumption. Several new variables are examined in order to systematically model variability of this symbolic connectivity, specifically the degree and strength of connectivity between items. In usage-based models, the lexicon does not constitute an unstructured list of items. Instead, items are assumed to be interconnected in a network. This interconnectedness is defined as Neighborhood in this study. Additionally, each verb carves its own niche within the Neighborhood and this interconnectedness is modeled through rhyme verbs constituting the degree of connectivity of a particular verb in the lexicon. The second component of the degree of connectivity concerns the status of a particular verb relative to its rhyme verbs. The connectivity within the neighborhood of a particular verb varies and this variability is quantified by using the Levenshtein distance. The second property of the lexical network is the strength of connectivity between items. Frequency of use has been one of the primary variables in functional linguistics used to probe this. In addition, a new variable called Constructional Entropy is introduced in this study building on information theory. It is a quantification of the amount of information carried by a particular reflexive verb in one or more argument constructions. The results of the lexical connectivity indicate that the reflexive verbs have statistically greater neighborhood distances than the neighbor verbs. This distributional property can be used to motivate the traditional observation that the reflexive verbs tend to have idiosyncratic properties. A set of argument constructions, generalizations over usage patterns, are proposed for the reflexive verbs in this study. In addition to the variables associated with the lexical connectivity, a number of variables proposed in the literature are explored and used as predictors in the model. The second part of this study introduces the use of a machine learning algorithm called Random Forests. The performance of the model indicates that it is capable, up to a degree, of disambiguating the proposed argument construction types of the Russian Reflexive Marker. Additionally, a global ranking of the predictors used in the model is offered. Finally, most construction grammars assume that argument construction form a network structure. A new method is proposed that establishes generalization over the argument constructions referred to as Linking Construction. In sum, this study explores the structural properties of the Russian Reflexive Marker and a new model is set forth that can accommodate both the traditional pairs and potential deviations from it in a principled manner.

A simulation model of the optimal maintenance strategy: conceptual agent-based approach

In this Master’s thesis agent-based modeling has been used to analyze maintenance strategy related phenomena. The main research question that has been answered was: what does the agent-based model made for this study tell us about how different maintenance strategy decisions affect profitability of equipment owners and maintenance service providers? Thus, the main outcome of this study is an analysis of how profitability can be increased in industrial maintenance context. To answer that question, first, a literature review of maintenance strategy, agent-based modeling and maintenance modeling and optimization was conducted. This review provided the basis for making the agent-based model. Making the model followed a standard simulation modeling procedure. With the simulation results from the agent-based model the research question was answered. Specifically, the results of the modeling and this study are: (1) optimizing the point in which a machine is maintained increases profitability for the owner of the machine and also the maintainer with certain conditions; (2) time-based pricing of maintenance services leads to a zero-sum game between the parties; (3) value-based pricing of maintenance services leads to a win-win game between the parties, if the owners of the machines share a substantial amount of their value to the maintainers; and (4) error in machine condition measurement is a critical parameter to optimizing maintenance strategy, and there is real systemic value in having more accurate machine condition measurement systems.

A Business continuity management maturity model : the search for an ISO 22301 Compliant BCM Maturity model

BCM (business continuity Management) is a holistic management process aiming at ensuring business continuity and building organizational resilience. Maturity models offer organizations a tool for evaluating their current maturity in a certain process. In the recent years BCM has been subject to international ISO standardization, while the interest of organizations to bechmark their state of BCM agains standards and the use of maturity models for these asessments has increased. However, although new standards have been introduced, very little attention has been paid to reviewing the existing BCM maturity models in research - especially in the light of the new ISO 22301 standard for BCM. In this thesis the existing BCM maturily models are carefully evaluated to determine whetherthey could be improved. In order to accomplish this, the compliance of the existing models to the ISO 22301 standard is measured and a framework for assessing a maturitymodel´s quality is defined. After carefully evaluating the existing frameworks for maturity model development and evaluation, an approach suggested by Becker et al. (2009) was chosen as the basis for the research. An additionto the procedural model a set of seven research guidelines proposed by the same authors was applied, drawing on the design-science research guidelines as suggested by Hevner et al. (2004). Furthermore, the existing models´ form and function was evaluated to address their usability. Based on the evaluation of the existing BCM maturity models, the existing models were found to have shortcomings in each dimension of the evaluation. Utilizing the best of the existing models, a draft version for an enhanced model was developed. This draft model was then iteratively developed by conducting six semi-structured interviews with BCM professionals in finland with the aim of validating and improving it. As a Result, a final version of the enhanced BCM maturity model was developed, conforming to the seven key clauses in the ISO 22301 standard and the maturity model development guidelines suggested by Becker et al. (2009).

Open innovation model for a large company in the ICT industry: Case Ericsson LMF

Open innovation paradigm states that the boundaries of the firm have become permeable, allowing knowledge to flow inwards and outwards to accelerate internal innovations and take unused knowledge to the external environment; respectively. The successful implementation of open innovation practices in firms like Procter & Gamble, IBM, and Xerox, among others; suggest that it is a sustainable trend which could provide basis for achieving competitive advantage. However, implementing open innovation could be a complex process which involves several domains of management; and whose term, classification, and practices have not totally been agreed upon. Thus, with many possible ways to address open innovation, the following research question was formulated: How could Ericsson LMF assess which open innovation mode to select depending on the attributes of the project at hand? The research followed the constructive research approach which has the following steps: find a practical relevant problem, obtain general understanding of the topic, innovate the solution, demonstrate the solution works, show theoretical contributions, and examine the scope of applicability of the solution. The research involved three phases of data collection and analysis: Extensive literature review of open innovation, strategy, business model, innovation, and knowledge management; direct observation of the environment of the case company through participative observation; and semi-structured interviews based of six cases involving multiple and heterogeneous open innovation initiatives. Results from the cases suggest that the selection of modes depend on multiple reasons, with a stronger influence of factors related to strategy, business models, and resources gaps. Based on these and others factors found in the literature review and observations; it was possible to construct a model that supports approaching open innovation. The model integrates perspectives from multiple domains of the literature review, observations inside the case company, and factors from the six open innovation cases. It provides steps, guidelines, and tools to approach open innovation and assess the selection of modes. Measuring the impact of open innovation could take years; thus, implementing and testing entirely the model was not possible due time limitation. Nevertheless, it was possible to validate the core elements of the model with empirical data gathered from the cases. In addition to constructing the model, this research contributed to the literature by increasing the understanding of open innovation, providing suggestions to the case company, and proposing future steps.

A Phase Model for Building a Customer Value Based Sales Tool – Case Mining and Metals Industry

The objective of this research is to observe the state of customer value management in Outotec Oyj, determine the key development areas and develop a phase model with which to guide the development of a customer value based sales tool. The study was conducted with a constructive research approach with the focus of identifying a problem and developing a solution for the problem. As a basis for the study, the current literature involving customer value assessment and solution and customer value selling was studied. The data was collected by conducting 16 interviews in two rounds within the company and it was analyzed by coding openly. First, seven important development areas were identified, out of which the most critical were “Customer value mindset inside the company” and “Coordination of customer value management activities”. Utilizing these seven areas three functionality requirements, “Preparation”, “Outotec’s value creation and communication” and “Documentation” and three development requirements for a customer value sales tool were identified. The study concluded with the formulation of a phase model for building a customer value based sales tool. The model included five steps that were defined as 1) Enable customer value utilization, 2) Connect with the customer, 3) Create customer value, 4) Define tool to facilitate value selling and 5) Develop sales tool. Further practical activities were also recommended as a guide for executing the phase model.

Accuracy improvement of a demand forecasting model

This research concerns different statistical methods that assist to increase the demand forecasting accuracy of company X’s forecasting model. Current forecasting process was analyzed in details. As a result, graphical scheme of logical algorithm was developed. Based on the analysis of the algorithm and forecasting errors, all the potential directions for model future improvements in context of its accuracy were gathered into the complete list. Three improvement directions were chosen for further practical research, on their basis, three test models were created and verified. Novelty of this work lies in the methodological approach of the original analysis of the model, which identified its critical points, as well as the uniqueness of the developed test models. Results of the study formed the basis of the grant of the Government of St. Petersburg.

Creating a Branding Process Model for Living Area Brands - Developing and managing a new living area brand

The objective of this thesis is to understand how to create and develop a successful place brand and how to manage it systematically. The thesis thoroughly explains the phenomenon of place brands and place branding and presents different sub-categories of place branding. The theoretical part of the thesis provides a wide overview on the prevailing literature of place branding, place brand development and place brand management, which form the basis of the thesis’ theoretical framework. The theoretical evidence is gathered from a case living area. The living area is developed by one construction company, which has a significant role in the construction industry in Finland. The empirical evidence is gathered through semi-structured in-depth interviews by interviewing the new living area’s carefully selected stakeholder groups. Afterwards the empirical data is analyzed and reflected to the theoretical findings. After examining the case living area, the thesis will present a new living area branding process model based on prevailing theories and empirical findings.

Toisen jäte on toisen raaka-aine – Kierrätys ja uudelleenvalmistus taloudellisesti ja ekologisesti kestävänä liiketoimintamahdollisuutena

Toisen jäte on toisen raaka-aine – Kierrätys ja uudelleenvalmistus taloudellisesti ja ekologisesti kestävänä liiketoimintamahdollisuutena Väitöskirjatutkimus tarkastelee kierrätystä ja uudelleenvalmistusta sekä siihen perustuvaa kierrätysliiketoimintaa taloudellisesti ja ekologisesti kestävänä liiketoimintamahdollisuutena. Tässä kestävyys tarkoittaa jätekysymysten ratkaisemista tavalla, joka mahdollistaa kestävän kehityksen periaatteiden mukaisen yhteiskunnan kehittymisen. Jätteisiin liittyvät taloudelliset ja ekolo- giset kysymykset ovat merkittävä yhteiskunnallinen haaste. Tämä luo tarpeen tutkimukselle, jonka lähtökohtana on jätekysymysten moniulotteinen tarkas- telu ja yksittäisen yrityksen toiminnan suhteuttaminen osaksi laajempaa kokonaisuutta. Tässä tutkimuksessa jätteen hyödyntämistä materiaalina lähestytään sekä empiirisesti yrityksen näkökulmasta että teoreettisesti systeemiajattelun tarjoamasta laajemmasta perspektiivistä. Tutkimuksen tavoitteena on ymmär- tää kierrätystä ja uudelleenvalmistusta liiketoimintamahdollisuutena, niiden merkitystä yrityksessä, alueella ja kierrätystaloudessa sekä näiden vuorovai- kutteista suhdetta taloudelliseen ja ekologiseen kestävyyteen nähden. Tutki- muskysymys on tärkeä, koska siihen vastaamalla syvennetään ymmärrystä yrityksissä tapahtuvan kierrätyksen ja uudelleenvalmistuksen merkityksestä kestävämmän yhteiskunnan rakentumisessa. Tutkimuksen teoriaperusta pohjautuu teollisen ekologian kirjallisuuteen ja ekoteollisen kehityksen tutkimukseen. Kierrätysliiketoiminnan kestävyyden tarkastelu rakentuu tutkimuksessa teollisen ekologian ja ekoteollisen kehityk- sen lähtökohtana olevaan win-win-ajatteluun, jonka mukaan hyvä ympäristö- suorituskyky ja hyvä taloudellinen suorituskyky voivat vahvistaa toisiaan. Kierrätysliiketoiminnan teoreettisessa tarkastelussa keskeisiä elementtejä ovat kierrätystalouden malli, teollisen ekologian alueelliset systeemit, ekoteolliset verkostot ja yrityksen rooli teollista ekologiaa soveltavana toimijana. Tutki- muksen keskeisenä kontribuutiona on yritysnäkökulman integroiminen aiem- paa vahvemmin osaksi teollisen ekologian diskursseja. Kierrätysliiketoiminnan taloudelliseen ja ekologiseen kannattavuuteen ja sen myötä kestävyyteen liittyviä kysymyksiä on lähestytty tekemällä yritys- haastatteluja ja hyödyntämällä valmista haastatteluaineistoa. Tutkimusta varten haastattelin 10 kierrätysliiketoimintaa harjoittavaa yritystä vuosina 2007 ja 2008. Tämän lisäksi tutkimuksessa on hyödynnetty Turun ammatti- korkeakoulun ja Turku Science Parkin toteuttamassa RESU-hankkeessa (Kierrätysliiketoiminta ja resurssitehokkuus Varsinais-Suomen vahvuudeksi – RESU) vuosina 2013 ja 2014 kerättyä aineistoa. Hankkeessa haastateltiin yhteensä 25 jätemateriaalia hyödyntävää ja/tai tuottavaa yritystä. Aineistojen analysointimenetelmänä on sisällönanalyysi. Analyysin tulok- sena muodostettiin yhteensä viisi pääteemaa ja 12 alateemaa. Teemat kuvaavat kierrätysliiketoimintaa aiempaa moniulotteisemmin ja näin syventävät ymmär- rystä ilmiön merkityksestä kestävämmän yhteiskunnan rakentumisessa. Teolli- sen ekologian alaan kuuluvat kvalitatiiviset tutkimukset ovat melko harvinai- sia, joten tämän väitöstutkimuksen ilmeisenä vahvuutena on laadullisen tutkimusmenetelmän hyödyntäminen. Tutkimuksen tuloksena voidaan todeta, että kierrätystalouden kehittymistä edistävä kierrätysliiketoiminta on monimuotoista ja sisältää erilaisia liiketoi- mintamahdollisuuksia sekä arvoketjuja. Paikallistuntemus ja keskeinen sijainti jätemateriaalien tuottajien suhteen on tärkeä kriteeri kierrätysliiketoiminnassa, mutta jätemateriaaleja myös kuljetetaan pitkiä matkoja. Paikallisia tai alueelli- sia jätevirtoja hyödyntävä kierrätysliiketoiminta voi tukea alueellista kestä- vyyttä, mutta toisinaan myös keskitetty hyödyntäminen voi olla kestävä vaih- toehto. Yhteistyöverkostot ovat tärkeitä jätemateriaalin laadun ja saatavuuden näkökulmasta. Tutkimus osoittaa, että kierrätysliiketoimintaa harjoittavat yritykset ovat samalla sekä kierrätystalouden käytännön toimeenpanijoita että uuden toimintakulttuurin luojia. Tutkimuksen tulosten perusteella voidaan esittää johtopäätös, että kierrä- tysliiketoiminta on taloudellisesti ja ekologisesti kannattava liiketoimintamah- dollisuus. Win-win-ratkaisut eivät kuitenkaan takaa kierrätysliiketoiminnan kestävyyttä. Kierrätysliiketoiminnan kestävyyden arvioiminen edellyttää laajaa perspektiiviä ja toiminnan vaikutusten suhteuttamista mittakaavaan, ajalliseen ulottuvuuteen, interventioon ja sosiaalisiin kysymyksiin. Teolliseen ekologiaan perustuva kierrätysliiketoiminta luo mahdollisuuksia edistää kestävyyttä, joten tällä perusteella kierrätystä ja uudelleenvalmistusta voidaan pitää kestävänä liiketoimintamahdollisuutena. Avainsanat: kierrätysliiketoiminta, kierrätys, uudelleenvalmistus, systeemiajattelu, teollinen ekologia, ekoteollinen kehitys, kierrätystalous, win-win-ajattelu, kestävyys One company's waste is another's raw material –Recycling and remanufacturing as an economically and environmentally sustainable business opportunity The thesis investigates whether product recycling and remanufacturing can serve as a business opportunity that is economically and ecologically sustaina- ble. In this effort, my idea is to contribute to solving the waste issue in a manner that makes it possible to strive toward sustainable societal develop- ment. The economic and ecological questions associated with waste flows are a significant challenge. The complexity of the issue requires a multidimen- sional approach in which the operation of an individual company is viewed in the context of the larger societal system. In this thesis waste utilization as a resource with value is considered both from an empirical perspective on the firm as well as from a more general viewpoint offered by systems analysis. The objective of the thesis is to under- stand recycling and remanufacturing as a business opportunity. The thesis considers the meaning of recycling and remanufacturing for a single company, for the region the company is located and for the recycling economy. The objective of this study is important for it enhances the understanding of the product recycling and remanufacturing processes that take place within busi- ness organizations and how these processes affect societal sustainable development. The theoretical basis arises from industrial ecology and from the literature on eco-industrial development. The business-economic win-win situation and this vision serve as the basic position from which recycling business is inves- tigated in the thesis. In the theoretical discussion, key elements are recycling economy model, regional and local industrial ecosystems, eco-industrial networks and the role of a company as an actor that applies industrial ecology in practice. The main contribution of this study lies in integrating the company perspective more strongly into the industrial ecology discourses. The recycling business has been studied by conducting interviews in companies and by secondary analysis of an existing interview material. During 2007 and 2008 I made 10 interviews in companies that are active in recycling business. In addition, I used interview material gathered for the project “Recycling business and resource efficiency as the strength of Southwest Finland” (RESU) by Turku University of Applied Sciences and Turku Science Park during the period 2013–2014. This data covers altogether 25 businesses that either utilize and/or produce waste materials. The data has been analyzed using the content analysis method. This process led to the development of 5 main themes and 12 sub-themes. These themes describe the recycling business multi-dimensionally and thus understanding of the phenomenon and its role in building a sustainable society are substantially deepened in this research. In the field of industrial ecology qualitative studies are relatively rare and therefore the qualitative research approach is an evident strength of the thesis. The results show that the recycling business activity supporting recycling economy has diverse dimensions including various business opportunities and diverse value chains. The results show that for waste producers it is important to know the local situational factors and to have a central geographical location. Waste materials are, however, transported over long distances as well. The study indicates that local waste flow utilization can support regional sustainability, while occasionally a more centralized utilization can be sustain- able. Collaboration networks are important to secure the quality and availabil- ity of utilizable waste materials. The thesis demonstrates that the companies practicing recycling business serve simultaneously as actors that implement recycling economy and enhance a new operation culture within the business community. The overall conclusion of the thesis argues that recycling business is a business opportunity that can support both an economically and environmen- tally viable business operation. However, win-win solutions do not secure the sustainability of recycling business. The sustainability evaluation of recycling business requires a holistic systems perspective. The actions undertaken need to be considered with changing spatial and temporal system boundaries, societal intervention and placed in the context of relevant societal issues. Industrial ecology -based recycling business creates opportunities for sustain- ability and thus recycling and remanufacturing present an opportunity for sustainable business. Keywords: Recycling business; Recycling; Remanufacturing, Systems thinking; Industrial ecology; Eco-industrial development; Recycling Economy; Win-Win thinking; Sustainability

How Is Credit Risk Estimated? Discussion and Evidence based on Cross-Industry Sample Utilizing the KMV Model

The purpose of this thesis is to focus on credit risk estimation. Different credit risk estimation methods and characteristics of credit risk are discussed. The study is twofold, including an interview of a credit risk specialist and a quantitative section. Quantitative section applies the KMV model to estimate credit risk of 12 sample companies from three different industries: automobile, banking and financial sector and technology. Timeframe of the estimation is one year. On the basis of the KMV model and the interview, implications for analysis of credit risk are discussed. The KMV model yields consistent results with the existing credit ratings. However, banking and financial sector requires calibration of the model due to high leverage of the industry. Credit risk is considerably driven by leverage, value and volatility of assets. Credit risk models produce useful information on credit worthiness of a business. Yet, quantitative models often require qualitative support in the decision-making situation.

Development of a New Welding Product Quality Control and Management System Model for China

The Chinese welding industry is growing every year due to rapid development of the Chinese economy. Increasingly, companies around the world are looking to use Chinese enterprises as their cooperation partners. However, the Chinese welding industry also has its weaknesses, such as relatively low quality and weak management. A modern, advanced welding management system appropriate for local socio-economic conditions is required to enable Chinese enterprises to enhance further their business development. The thesis researches the design and implementation of a new welding quality management system for China. This new system is called ‗welding production quality control management model in China‘ (WQMC). Constructed on the basis of analysis of a survey and in-company interviews, the welding management system comprises the following different elements and perspectives: a ‗Localized congenital existing problem resolution strategies‘ (LCEPRS) database, a ‗human factor designed training system‘ (HFDT) training strategy, the theory of modular design, ISO 3834 requirements, total welding management (TWM), and lean manufacturing (LEAN) theory. The methods used in the research are literature review, questionnaires, interviews, and the author‘s model design experiences and observations, i.e. the approach is primarily qualitative and phenomenological. The thesis describes the design and implementation of a HFDT strategy in Chinese welding companies. Such training is an effective way to increase employees‘ awareness of quality and issues associated with quality assurance. The study identified widely existing problems in the Chinese welding industry and constructed a LCEPRS database that can be used in efforts to mitigate and avoid common problems. The work uses the theory of modular design, TWM and LEAN as tools for the implementation of the WQMC system.