Designing and Implementing Mouse Emulation to Touchscreen Operated Mobile Web Browsers

Browsing the web has become one of the most important features in high end mobile phones and in the future more and more people will be using mobile phone for web browsing. Large touchscreens improve browsing experience but many web sites are designed to be used with a mouse. A touchscreen differs substantially from a mouse as a pointing device and therefore mouse emulation logic is required in the browsers to make more web sites usable. This Master's thesis lists the most significant cases where the differences of a mouse and a touchscreen affect web browsing. Five touchscreen mobile phones and their web browsers were evaluated to find out if and how these cases are handled in them. Also as a part of this thesis, a simple QtWebKit based mobile web browser with advanced mouse emulation model was implemented, aiming to solve all the problematic cases. The conclusion of this work is that it is feasible to emulate a mouse with a touchscreen and thus deliver good user experience in mobile web browsing. However, current highend touchscreen mobile phones have relatively underdeveloped mouse emulations in their web browsers and there is a lot to improve.

Insulation System in an Integrated Motor Compressor

A high-speed and high-voltage solid-rotor induction machine provides beneficial features for natural gas compressor technology. The mechanical robustness of the machine enables its use in an integrated motor-compressor. The technology uses a centrifugal compressor, which is mounted on the same shaft with the high-speed electrical machine driving it. No gearbox is needed as the speed is determined by the frequency converter. The cooling is provided by the process gas, which flows through the motor and is capable of transferring the heat away from the motor. The technology has been used in the compressors in the natural gas supply chain in the central Europe. New areas of application include natural gas compressors working at the wellheads of the subsea gas reservoir. A key challenge for the design of such a motor is the resistance of the stator insulation to the raw natural gas from the well. The gas contains water and heavy hydrocarbon compounds and it is far harsher than the sales gas in the natural gas supply network. The objective of this doctoral thesis is to discuss the resistance of the insulation to the raw natural gas and the phenomena degrading the insulation. The presence of partial discharges is analyzed in this doctoral dissertation. The breakdown voltage of the gas is measured as a function of pressure and gap distance. The partial discharge activity is measured on small samples representing the windings of the machine. The electrical field behavior is also modeled by finite element methods. Based on the measurements it has been concluded that the discharges are expected to disappear at gas pressures above 4 – 5 bar. The disappearance of discharges is caused by the breakdown strength of the gas, which increases as the pressure increases. Based on the finite element analysis, the physical length of a discharge seen in the PD measurements at atmospheric pressure was approximated to be 40 – 120 m. The chemical aging of the insulation when exposed to raw natural gas is discussed based on a vast set of experimental tests with the gas mixture representing the real gas mixture at the wellhead. The mixture was created by mixing dry hydrocarbon gas, heavy hydrocarbon compounds, monoethylene glycol, and water. The mixture was chosen to be more aggressive by increasing the amount of liquid substances. Furthermore, the temperature and pressure were increased, which resulted in accelerated test conditions. The time required to detect severe degradation was thus decreased. The test program included a comparison of materials, an analysis of the e ects of di erent compounds in the gas mixture, namely water and heavy hydrocarbons, on the aging, an analysis of the e ects of temperature and exposure duration, and also an analysis on the e ect of sudden pressure changes on the degradation of the insulating materials. It was found in the tests that an insulation consisting of mica, glass, and epoxy resin can tolerate the raw natural gas, but it experiences some degradation. The key material in the composite insulation is the resin, which largely defines the performance of the insulation system. The degradation of the insulation is mostly determined by the amount of gas mixture di used into it. The di usion was seen to follow Fick’s second law, but the coe cients were not accurately defined. The di usion was not sensitive to temperature, but it was dependent upon the thermodynamic state of the gas mixture, in other words, the amounts of liquid components in the gas. The weight increase observed was mostly related to heavy hydrocarbon compounds, which act as plasticizers in the epoxy resin. The di usion of these compounds is determined by the crosslink density of the resin. Water causes slight changes in the chemical structure, but these changes do not significantly contribute to the aging phenomena. Sudden changes in pressure can lead to severe damages in the insulation, because the motion of the di used gas is able to create internal cracks in the insulation. Therefore, the di usion only reduces the mechanical strength of the insulation, but the ultimate breakdown can potentially be caused by a sudden drop in the pressure of the process gas.

Real-time Musical Pair Improvisation on Mobile Devices

This thesis discusses the design and implementation of a real-time musical pair improvisation scenario for mobile devices. In the scenario transferring musical information over a network connection was required. The suitability of available wireless communication technologies was evaluated and communication was analyzed and designed on multiple layers of TCP/IP protocol stack. Also an application layer protocol was designed and implemented for the scenario. The implementation was integrated into a mobile musical software for children using available software components and libraries although the used platform lead to hardware and software constraints. Software limitations were taken into account in design. The results show that real-time musical improvisation can be implemented with wireless communication and mobile technology. The results also show that link layer had the most significant effect on real-time communication in the scenario.

Design and analysis of a transversal-flux switched-reluctance-linear-machine pole-pair

The Switched Reluctance technology is probably best suited for industrial low-speed or zerospeed applications where the power can be small but the torque or the force in linear movement cases might be relatively high. Because of its simple structure the SR-motor is an interesting alternative for low power applications where pneumatic or hydraulic linear drives are to be avoided. This study analyses the basic parts of an LSR-motor which are the two mover poles and one stator pole and which form the “basic pole pair” in linear-movement transversal-flux switchedreluctance motors. The static properties of the basic pole pair are modelled and the basic design rules are derived. The models developed are validated with experiments. A one-sided one-polepair transversal-flux switched-reluctance-linear-motor prototype is demonstrated and its static properties are measured. The modelling of the static properties is performed with FEM-calculations. Two-dimensional models are accurate enough to model the static key features for the basic dimensioning of LSRmotors. Three-dimensional models must be used in order to get the most accurate calculation results of the static traction force production. The developed dimensioning and modelling methods, which could be systematically validated by laboratory measurements, are the most significant contributions of this thesis.

Mobile banking in developing countries

This Master’s thesis examines the feasibility of eBusiness in developing countries by looking at the current mobile banking solutions. The research involved reviewing literature that was relevant to the research questions. It was discovered that the Wizzit and M-PESA are the current solutions to mobile banking. Furthermore, it was found out that the Wizzit and M-PESA were either transformational or additive. Additive mobile banking is the use of mobile phones as a channel to provide services to existing customers within financial institutions. Transformational mobile banking extends financial services to the unbanked. The results of the thesis are M-PESA works with only Safaricom while on the other hand Wizzit has compatibility with any mobile operator. The other result is that both M-PESA and Wizzit are transformational mobile banking technologies at the sametime Wizzit is an Additive mobile banking technology. Wizzit can provide financial services to both the unbanked and existing bank customers. It can be said the merits of Wizzit outweigh those of M-PESA which makes Wizzit better.

Working Capital Management: a Bibliometric Study

This thesis is a study of articles published in scientific journals about working capital management using bibliometric methods. The study was restricted to articles published in 1990–2010 that deal with the whole working capital management topic not a single sub-area of it. Working capital is defined as current assets minus current liabilities; sometimes also a definition of inventory plus accounts receivable minus accounts payable is used. The data was retrieved from the databases ISI Web of Science and Sciverse Scopus. Articles about working capital management were found 23. Content analysis, statistical analysis and citation analysis was performed to the articles. The most cited articles found in citation analysis were also analyzed by nearly same methods. This study found that scientific research of working capital management seems not to be concentrated to specific persons, organizations or journals. The originality and novelty in many articles is low. Many articles studied relation between working capital management and profitability in firms or working capital management practices of firms using statistical analyses. Data in articles was firms of all sizes, except in developing economies only big firms were used. Interesting areas for future research could be surveys made about working capital management practices in firms, finding of best practices, tools for working capital management, inventing or improving alternative views to working capital management like process-oriented view and firm or industry specific studies.

Working capital management in the value chain of automotive industry

The objective of this Master’s thesis is to examine working capital management in the automotive industry in years 2006-2008. The study is conducted by the analysis of financial statements. The sample consists of 65 companies that represent different stages in the value chain of automotive industry beginning from raw material suppliers and ending to car dealers. Working capital management is studied by the cash conversion cycle (CCC). The results show that the average CCC of the value chain is 67 days. Car manufacturers had the longest CCC, 106 days, whereas the CCC of oil companies was the shortest, 22 days. The findings suggest that the cycle time of working capital usually follows the cycle time of inventories, since the changes in cycle times of accounts receivable and payable compensate each other. Improvements in working capital management could be achieved by sharing more accurate information in the chain for example about inventory levels and order points of customer. It could also be discussed within the automotive industry, if the long credit periods, which tie up working capital, are really needed. New technologies enable faster payments, which would reduce the cash conversion cycles, improve the profitability of companies, and increase the competitiveness of the value chain. Working capital should not be reduced at the expense of value chain partners, because nowadays the competition is rather between the value chains than between the companies. Similar research design is applied earlier to study working capital management in the value chain of pulp and paper industry. Even if the industries and the structures of the chains differ from each other, results were surprisingly similar. In future research, working capital management in other industries’ value chains could still be studied and compared to previous studies. ICT industry, for example, could be an interesting object.

Conference Proceedings. Academic Mobility Blending Perspectives - Mobilité Académique Perspectives croisées

Les 21, 22 et 23 septembre 2006, le Département d’Études Françaises de l’Université de Turku (Finlande) a organisé une conférence internationale et bilingue (anglais et français) sur le thème de la mobilité académique ; le but de cette rencontre était de rendre possible la tenue d’un forum international et multidisciplinaire, susceptible d’être le siège de divers débats entre les différents acteurs de la mobilité académique (c’estàdire des étudiants, des chercheurs, des personnels enseignants et administratifs, etc.). Ainsi, ont été mis à contribution plus de cinquante intervenants, (tous issus de domaines aussi variés que la linguistique, les sciences de l’éducation, la didactique, l’anthropologie, la sociologie, la psychologie, l’histoire, la géographie, etc.) ainsi que cinq intervenants renommés1. La plupart des thèmes traités durant la conférence couvraient les champs suivants : l’organisation de la mobilité, les obstacles rencontrés par les candidats à la mobilité, l’intégration des étudiants en situation d’échange, le développement des programmes d’études, la mobilité virtuelle, l’apprentissage et l’enseignement des langues, la prise de cosncience interculturelle, le développement des compétences, la perception du système de mobilité académique et ses impacts sur la mobilité effective. L’intérêt du travail réalisé durant la conférence réside notamment dans le fait qu’il ne concentre pas uniquement des perspectives d’étudiants internationaux et en situation d’échange (comme c’est le cas de la plupart des travaux de recherche déjà menés sur ce sujet), mais aussi ceux d’autres corps : enseignants, chercheurs, etc. La contribution suivante contient un premier corpus de dixsept articles, répartis en trois sections : 1. Impacts de la mobilité étudiante ; 2. Formation en langues ; 3. Amélioration de la mobilité académique. À l’image de la conférence, la production qui suit est bilingue : huit des articles sont rédigés en français, et les neuf autres en anglais. Certains auteurs n’ont pas pu assister à la conférence mais ont tout de même souhaité apparaître dans cet ouvrage. Dans la première section de l’ouvrage, Sandrine Billaud tâche de mettre à jour les principaux obstacles à la mobilité étudiante en France (logement, organisation des universités, démarches administratives), et propose à ce sujet quelques pistes d’amélioration. Vient ensuite un article de Dominique Ulma, laquelle se penche sur la mobilité académique régnant au sein des Instituts Universitaires de Formation des Maîtres (IUFM) ; elle s’est tout particulièrement concentrée sur l’enthousiasme des stagiaires visàvis de la mobilité, et sur les bénéfices qu’apporte la mobilité Erasmus à ce type précis d’étudiant. Ensuite, dans un troisième article, Magali Hardoin s’interroge sur les potentialités éducationnelles de la mobilité des enseignantsstagiaires, et tâche de définir l’impact de celleci sur la construction de leur profil professionnel. Après cela arrive un groupe de trois articles, tous réalisés à bases d’observations faites dans l’enseignement supérieur espagnol, et qui traitent respectivement de la portée qu’a le programme de triple formation en langues européennes appliquées pour les étudiants en mobilité (Marián MorónMartín), des conséquences qu’occasionne la présence d’étudiants étrangers dans les classes de traductions (Dimitra Tsokaktsidu), et des réalités de l’intégration sur un campus espagnol d’étudiants américains en situation d’échange (Guadalupe Soriano Barabino). Le dernier article de la section, issu d’une étude sur la situation dans les institutions japonaises, fait état de la situation des programmes de doubles diplômes existant entre des établissements japonais et étrangers, et tente de voir quel est l’impact exact de tels programmes pour les institutions japonaises (Mihoko Teshigawara, Riichi Murakami and Yoneo Yano). La seconde section est elle consacrée à la relation entre apprentissage et enseignement des langues et mobilité académique. Dans un premier article, Martine Eisenbeis s’intéresse à des modules multimédia réalisés à base du film « L’auberge espagnole », de Cédric Klapish (2001), et destinés aux étudiants en mobilité désireux d’apprendre et/ou améliorer leur français par des méthodes moins classiques. Viennent ensuite les articles de Jeanine Gerbault et Sabine Ylönen, lesquels traitent d’un projet européen visant à supporter la mobilité étudiante par la création d’un programme multimédia de formation linguistique et culturelle pour les étudiants en situation de mobilité (le nom du projet est EUROMOBIL). Ensuite, un article de Pascal Schaller s’intéresse aux différents types d’activités que les étudiants en séjour à l’étranger expérimentent dans le cadre de leur formation en langue. Enfin, la section s’achève avec une contribution de Patricia KohlerBally, consacrée à un programme bilingue coordonné par l’Université de Fribourg (Suisse). La troisième et dernière section propose quelques pistes de réflexion destinées à améliorer la mobilité académique des étudiants et des enseignants ; dans ce cadre seront donc évoquées les questions de l’égalité face à la mobilité étudiante, de la préparation nécessitée par celleci, et de la prise de conscience interculturelle. Dans un premier chapitre, Javier Mato et Bego

Solving the puzzle of mobile learning adoption

The dissertation seeks to explore how to improve users‘ adoption of mobile learning in current education systems. Considering the difference between basic and tertiary education in China, the research consists of two separate but interrelated parts, which focus on the use of mobile learning in basic and tertiary education contexts, respectively. In the dissertation, two adoption frameworks are developed based on previous studies. The frameworks are then evaluated using different technologies. Concerning mobile learning use in basic education settings, case study methodology is utilized. A leading provider of mobile learning services and products in China, Noah Ltd., is investigated. Multiple sources of evidence are collected to test the framework. Regarding mobile learning adoption in tertiary education contexts, survey research methodology is utilized. Based on 209 useful responses, the framework is evaluated using structural equation modelling technology. Four proposed determinants of intention to use are evaluated, which are perceived ease of use, perceived near-term usefulness, perceived ong-term usefulness and personal innovativeness. The dissertation provides a number of new insights for both researchers and practitioners. In particular, the dissertation specifies a practical solution to deal with the disruptive effects of mobile learning in basic education, which keeps the use of mobile learning away from the schools across such as European countries. A list of new and innovative mobile learning technologies is systematically introduced as well. Further, the research identifies several key factors driving mobile learning adoption in tertiary education settings. In theory, the dissertation suggests that since the technology acceptance model is initiated in work-oriented innovations by testing employees, it is not necessarily the best model for studying educational innovations. The results also suggest that perceived longterm usefulness for educational systems should be as important as perceived usefulness for utilitarian systems, and perceived enjoyment for hedonic systems. A classification based on the nature of systems purpose (utilitarian, hedonic or educational) would contribute to a better understanding of the essence of IT innovation adoption.

The Usage of Microsoft Push Notification Service on Mobile Devices

Along with the increasing in demand of mobile computing, Push Notification (PN) is widely used in mobile phones and other devices. PN allows the developer to send messages to the end users even when the client application is not running at the moment. This solves the problem produced by non-supported multi-tasking feature as well as saving battery life. Microsoft Push Notification Service (MPNS) is one solution to use PNs in Windows Phones. The thesis gives the developers an idea of how to use PNs by introducing MPNS, comparing MPNS with other Push Notification Services, usage of different PN types analysis, and PN simulation system implementation.

Construction Plan Image Service for Mobile Devices

The forthcoming media revolution of exchanging paper documents to digital media in construction engineering requires new tools to be developed. The basis of this bachelor’s thesis was to explore the preliminary possibilities of exporting imagery from a Building Information Modelling –software to a mobile phone on a construction yard. This was done by producing a Web Service which uses the design software’s Application Programming Interface to interact with a structures model in order to produce the requested imagery. While mobile phones were found lacking as client devices, because of limited processing power and small displays, the implementation showed that the Tekla Structures API can be used to automatically produce various types of imagery. Web Services can be used to transfer this data to the client. Before further development the needs of the contractor, benefits for the building master and inspector and the full potential of the BIM-software need to be mapped out with surveys.

Apple, Nokia and RIM – Rivalry and Co-operation between Three Mobile Phone Corporations

The purpose of this paper is to gather enough evidence to speculate the future of Nokia, Rim and Apple. The thesis goes over the history, current events and business model of each company. This paper includes differences between the companies and co-operation and rivalry, such as patent infringement cases. The study is limited to smartphones and their future. The result of this study is that Apple will continue its steady increase in market share, while Nokia will first decrease and after the launch of the Windows Phone it will rise again. RIM‟s result has not been as good as in past years and it has lost market share. The decrease of share price may lead to acquisition by a company interested in RIM technology.

Energiapuun haketuksen ja murskauksen kustannukset

Energiapuun tuotannossa puu on hienonnettava kuljettimille ja kattilaan sopivaan kokoon. Tämä tehdään Suomessa yleensä joko metsätien varressa välivarastolla, keskitetyssä terminaalissa tai voimalaitoksella. Puu hienonnetaan joko terävillä terillä hakettamalla tai tylpemmillä työkaluilla murskaamalla. Hakkeessa on vähemmän käsittelyä haittaavia pitkiä tikkuja ja sen valmistamiseen tarvittava energia on hiukan pienempi kuin murskaimilla. Viimeksi mainitulla on merkitystä lähinnä karsittua puuta haketettaessa. Murskain puolestaan sallii enemmän epäpuhtauksia raaka-aineessa, joten esimerkiksi kantoja käsitellään vain murskaimilla. Tässä tarkastellaan erityisesti pienpuun haketuksen ja murskauksen kustannuksia. Pienpuuta saadaan nuoren metsän kunnostuksista ja ensiharvennuksista. Se voi olla joko karsimatonta kokopuuta tai karsittua rankaa. Kokonaiskustannukset pienpuun haketukselle tai murskaukselle ovat tämän tutkimuksen mukaan välivarastolla noin 3,4 euroa/MWh ja terminaalilla tai voimalaitoksella noin 2 euroa/MWh. Pääomakustannukset ovat pienpuulla tavallisesti 1-1,2 euroa/MWh, keskitetyllä terminaalilla toimittaessa noin kolmanneksen vähemmän, jos pääomalle asetetaan 10% tuottovaatimus. Työvoimakustannukset ovat 30-80 snt/MWh varaston ja laitteen koosta riippuen, käyttöenergia dieselmoottoria käytettäessä noin 50 snt/MWh, sähkömoottorilla noin 30 snt/MWh. Muut kulut, mm. huolto, ovat yhteensä 40-80 snt/MWh. Energiapuun hankinnan kokonaiskustannuksista raaka-aineen hienontamisen osuus on 10-30% puutavaran lajista ja käytetystä työmenetelmästä riippuen. Terminaaleilla ja voimalaitoksilla toimittaessa on usein kiinnitettävä huomiota melun- ja pölyntorjuntaan. Muun muassa näistä syistä saattaa kiinteä, sähkökäyttöinen murska olla sopiva sellaisiin kohteisiin, joissa käsiteltävät määrät ovat suuria ja toiminta pysyvää. Melun ja pölyn kunnollinen torjunta vaatii suuria rakenteita, joita on vaikea yhdistää liikuteltaviin laitteisiin.

Automated Software Testing in Machine Automation

The problem of software (SW) defaults is becoming more and more topical because of increasing amount of the SW and its complication. The majority of these defaults are founded during the test part that consumes about 40-50% of the development efforts. Test automation allows reducing the cost of this process and increasing testing effectiveness. In the middle of 1980 the first tools for automated testing appeared and the automated process was implemented in different kinds of SW testing. In short time, it became obviously, automated testing can cause many problems such as increasing product cost, decreasing reliability and even project fail. This thesis describes automated testing process, its concept, lists main problems, and gives an algorithm for automated test tools selection. Also this work presents an overview of the main automated test tools for embedded systems.