Open innovation model for a large company in the ICT industry: Case Ericsson LMF

Open innovation paradigm states that the boundaries of the firm have become permeable, allowing knowledge to flow inwards and outwards to accelerate internal innovations and take unused knowledge to the external environment; respectively. The successful implementation of open innovation practices in firms like Procter & Gamble, IBM, and Xerox, among others; suggest that it is a sustainable trend which could provide basis for achieving competitive advantage. However, implementing open innovation could be a complex process which involves several domains of management; and whose term, classification, and practices have not totally been agreed upon. Thus, with many possible ways to address open innovation, the following research question was formulated: How could Ericsson LMF assess which open innovation mode to select depending on the attributes of the project at hand? The research followed the constructive research approach which has the following steps: find a practical relevant problem, obtain general understanding of the topic, innovate the solution, demonstrate the solution works, show theoretical contributions, and examine the scope of applicability of the solution. The research involved three phases of data collection and analysis: Extensive literature review of open innovation, strategy, business model, innovation, and knowledge management; direct observation of the environment of the case company through participative observation; and semi-structured interviews based of six cases involving multiple and heterogeneous open innovation initiatives. Results from the cases suggest that the selection of modes depend on multiple reasons, with a stronger influence of factors related to strategy, business models, and resources gaps. Based on these and others factors found in the literature review and observations; it was possible to construct a model that supports approaching open innovation. The model integrates perspectives from multiple domains of the literature review, observations inside the case company, and factors from the six open innovation cases. It provides steps, guidelines, and tools to approach open innovation and assess the selection of modes. Measuring the impact of open innovation could take years; thus, implementing and testing entirely the model was not possible due time limitation. Nevertheless, it was possible to validate the core elements of the model with empirical data gathered from the cases. In addition to constructing the model, this research contributed to the literature by increasing the understanding of open innovation, providing suggestions to the case company, and proposing future steps.

Creating risk measurement model to project portfolio management in construction company

This thesis was carried out as a case study of a company YIT in order to clarify the sev-erest risks for the company and to build a method for project portfolio evaluation. The target organization creates new living environment by constructing residential buildings, business premises, infrastructure and entire areas worth for EUR 1.9 billion in the year 2013. Company has noted project portfolio management needs more information about the structure of project portfolio and possible influences of market shock situation. With interviews have been evaluated risks with biggest influence and most appropriate metrics to examine. The major risks for the company were evaluated by interviewing the executive staff. At the same time, the most appropriate risk metrics were considered. At the moment sales risk was estimated to have biggest impact on company‟s business. Therefore project port-folio evaluation model was created and three different scenarios for company‟s future were created in order to identify the scale of possible market shock situation. The created model is tested with public and descriptive figures of YIT in a one-year-long market shock and the impact on different metrics was evaluated. Study was conducted using con-structive research methodology. Results indicate that company has notable sales risk in certain sections of business portfolio.

Value-based Reference Marketing in a Small Process Industry Software and Service Company

This master’s thesis was done for a small company, Vipetec Oy, which offers specialized technological services for companies mainly in forest industry. The study was initiated partly because the company wants to expand its customer base to a new industry. There were two goals connected to each other. First was to find out how much and what kind of value current customers have realized from ATA Process Event Library, one of the products that the company offers. Second was to determine the best way to present this value and its implications for future value potential to both current and potential customers. ATA helps to make grade and product changes, starting after machine downtime, and recovery from production break faster for customers. All three events sometimes occur in production line. The faster operation results to savings in time and material. In addition to ATA Vipetec also offers other services related to development of automation and optimization of controls. Theoretical part concentrates on the concept of value, how it can be delivered to customers, and what kind of risk customer faces in industrial purchasing. Also the function of reference marketing towards customers is discussed. In the empirical part the realized value for existing customers is evaluated based on both numerical data and interviews. There’s also a brief case study about one customer. After that the value-based reference marketing for a target industry is examined through interviews of these potential customers. Finally answers to the research questions are stated and compared also to the theoretical knowledge about the subject. Results show that those customers’ machines which use the full service concept of ATA usually are able to save more time and material than the machines which use only some features of the product. Interviews indicated that sales arguments which focus on improved competitive status are not as effective as current arguments which focus on numerical improvements. In the case of potential customers in the new industry, current sales arguments likely work best for those whose irregular production situations are caused mainly by fault situations. When the actions of Vipetec were compared to ten key elements of creating customer references, it was seen that many of them the company has either already included in its strategy or has good chances to include them with the help of the results of this study.

Centralized IT management using SCCM in a large multinational company

Microsoft System Center Configuration Manager is a systems management product for managing large groups of computers and/or mobile devices. It provides operating system deployment, software distribution, patch management, hardware & software inventory, remote control and many other features for the managed clients. This thesis focuses on researching whether this product is suitable for large, international organization with no previous, centralized solution for managing all such networked devices and detecting areas, where the system can be altered to achieve a more optimal management product from the company’s perspective. The results showed that the system is suitable for such organization if properly configured and clear and transparent line of communication between key IT personnel exists.

The radio frequency identification technology in the supply chain management: a case of a big logistics company

Nowadays global business trends force the adoption of innovative ICTs into the supply chain management (SCM). Particularly, the RFID technology is on high demand among SCM professionals due to its business advantages such as improving of accuracy and veloc-ity of SCM processes which lead to decrease of operational costs. Nevertheless, a question of the RFID technology impact on the efficiency of warehouse processes in the SCM re-mains open. The goal of the present study is to experiment the possibility of improvement order picking velocity in a warehouse of a big logistics company with the use of the RFID technology. In order to achieve this goal the following objectives have been developed: 1) Defining the scope of the RFID technology applications in the SCM; 2) Justification of the RFID technology impact on the SCM processes; 3) Defining a place of the warehouse order picking process in the SCM; 4) Identification and systematization of existing meth-ods of order picking velocity improvement; 5) Choosing of the study object and gathering of the empirical data about number of orders, number of hours spent per each order line daily during 5 months; 6) Processing and analysis of the empirical data; 7) Conclusion about the impact of the RFID technology on the speed of order picking process. As a result of the research it has been found that the speed of the order picking processes has not been changed as time has gone after the RFID adoption. It has been concluded that in order to achieve a positive effect in the speed of order picking process with the use of the RFID technology it is necessary to simultaneously implement changes in logistics and organizational management in 3PL logistics companies. Practical recommendations have been forwarded to the management of the company for further investigation and procedure.

Pursuit of change versus organizational inertia: a study on strategic renewal in the Finnish broadcasting company

This doctoral dissertation explores the intra-organizational dynamics of a strategic renewal process. The main research question is how the pursuit of change and organizational inertia co-exist, intertwine, and collide in organizational cognition and capabilities during the strategic renewal. It is a comprehensive study on how organizational capabilities, organizational cognition, and structure enhance and inhibit change. Theoretically, the study is positioned in the modern tradition of strategy research, using the dynamic capability view and the organizational and managerial cognition research tradition as the main theoretical frames. Empirically, the study is a longitudinal case study of the Finnish Broadcasting Company (Yle), following the organizational changes during the years of 2011-1014. The analysis is based on both quantitative and qualitative data, which was collected during the research process using surveys, interviews, and archives. The main theoretical contribution is the application of the two theoretical approaches in one study. Empirically, the study contributes to operationalization of the concepts related to the dynamic capability view and organizational cognition, in a media context that is going through drastic changes due to digitalization. Furthermore, the case of a public broadcasting company extends the application of the theoretical concepts to the context of public management. The results suggest that renewal is a complex process, in which an organization’s perceptions intertwine with the strategic actions and decision-making. The change evolves pathdependently: the past experiences, routines, and organizational structures tend to dictate the future visions, desires, and actions. The study also reveals how the public nature of an organization adds to the tensions between change and organizational inertia, and hampers the decision-making. The doctoral dissertation consists of six research papers, each of which explores the phenomenon under study from a different perspective.

Pulsed electric field assisted sol-gel preparation of TiO2 particles and their photocatalytic properties

The objective of this thesis was to study the effect of pulsed electric field on the preparation of TiO2 nanoparticles via sol-gel method. The literature part deals with properties of different TiO2 crystal forms, principles of photocatalysis, sol-gel method and pulsed electric field processing. It was expected that the pulsed electric field would have an influence on crystallite size, specific surface area, polymorphism and photocatalytic activity of produced particles. TiO2 samples were prepared by using different frequencies and treatment times of pulsed electric field. The properties of produced TiO2 particles were examined X-ray diffraction (XRD), Raman spectroscopy and BET surface area analysis. The photocatalytic activities of produced TiO2 particles were determined by using them as photocatalysts for the degradation of formic acid under UVA-light. The photocatalytic activities of samples produced with sol-gel method were also compared with the commercial TiO2 powder Aeroxide® (Evonic Degussa GmbH). Pulsed electric field did not have an effect on the morphology of particles. Results from XRD and Raman analysis showed that all produced TiO2 samples were pure anatase. However, pulsed electric field did have an effect on crystallite size, specific surface area and photocatalytic activity of TiO2 particles. Generally, the crystallite sizes were smaller, specific surface areas larger and initial formic acid degradation rates higher for samples that were produced by applying the pulsed electric field. The higher photocatalytic activities were attributed to larger surface areas and smaller crystallite sizes. Though, with all of the TiO2 samples produced by the sol-gel method the initial formic acid degradation rates were significantly slower than with the commercial TiO2 powder.

Siirtohinnoittelun kehittäminen etäluettavilta mittareilta saatavan datan avulla sähkönjakeluyhtiö Mäntsälän Sähkö Oy:lle

Sähkönsiirtomaksuilla katetaan luonnollisena alueellisena monopolina toimivan paikallisen sähkönjakeluyhtiön toiminta. Koska sähköverkkoyhtiöt toimivat monopoliasemassa, niiden toimintaa valvoo Energiavirasto. Energiavirasto valvoo pääasiassa verkkoyhtiöiden liikevaihtoa ja toiminnan tehokkuutta. Verkkoyhtiöiden toimintaa säätää Suomessa sähkömarkkinalaki. Verkkoyhtiöiden kustannusrakenne on hyvin sidottu verkoston kustannuksiin. Koska sähköverkoston kustannukset ovat pitkän käyttöiän ja suurien alkuinvestointien vuoksi vuosittain kiinteät ja merkittävän suuret, olisi verkkoyhtiön kannalta tärkeää, että vuosittaiset tulot eivät suuresti vaihtelisi. Nykyisellä hinnoittelumallilla kuitenkin verkkoyhtiöiden tulot jäävät hyvin riippuvaisiksi talven kylmyydestä. Nykyisin Suomessa yleisesti käytettävässä siirtohinnoittelun hinnoittelumallissa ei huomioida myöskään sitä, että verkkoyhtiön kustannukset ovat enemmän riippuvaisia verkossa siirretyistä tehoista kuin energioista. Siirtohinnoittelun kannalta on tapahtunut ja on tapahtumassa merkittäviä muutoksia. Etäluettavien sähkönkulutusmittarien käyttöönoton myötä asiakkaiden kulutuksesta saadaan huomattavasti entistä enemmän tietoa, mikä auttaa kustannusvastaavien hintojen määrittämisessä. Samaan aikaan asiakkaiden sähkön käyttö voi muuttua huomattavasti varsinkin sähköautojen ja lämpöpumppujen yleistymisen myötä. Tämän työn tarkoituksena on luoda Mäntsälän Sähkö Oy:lle sähkönsiirtohinnoittelun kustannuksia vastaavien hintojen määrittämiseksi laskentasovellus sekä selvittää tulevaisuuden siirtohinnoittelun toteuttamismahdollisuuksia. Lyhyen aikavälin suunnittelussa keskitytään kustannusvastaavien hintojen määrittämiseen keskihintaperiaatteen avulla ja pidemmän aikavälin suunnittelussa asiakkaiden huipputehoihin perustuvan hinnoittelun toteuttamisen vaikutuksiin sekä verkkoyhtiön että asiakkaan näkökulmasta.

Building a Roadmap for a Market Intelligence function in a Global B2B company

Tämän diplomityötutkimuksen tarkoituksena on luoda markkinaälyyn (MI) erikoistunut funktio suurelle, globaalisti toimivalle B2B-yritykselle. Tämän päivän muut-tuvilla markkinoilla, teollisuusyrityksen on oltava markkinalähtöinen selviytyäkseen. Markkinatiedon tehokas hyödyntäminen ei pelkästään luo tietoa markkinoista, vaan tuottaa kilpailukykyistä tietoa ja toimii strategisen päätöksenteon tukena pitkällä aikavälillä. Tämä tutkimus on kvalitatiivinen toimintatutkimus, joka sisältää kirjallisuuskat-sauksen, yritystapaustutkimuksen sekä syväanalyysin yrityksen MI-ympäristöstä. Kirjallisuuskatsaus pitää sisällään teoriaa liittyen markkinaälyyn useassa eri kon-tekstissa, asiakassuhteeseen, sekä prosessinmallintamiseen. Empiiriseen osaa seuraa tutkimusmenetelmäkappale, joka sisältää kaksivaiheisen tutkimuksen mukaan lu-kien 20 päällikkötason haastattelua sekä yhden laaja-alaisen työryhmätapaamisen. Työn tuloksena syntyy kolmivaiheinen tiekartta, jonka tarkoitus on toimia pohjana uuden MI-funktion rakentamiselle Case-yrityksessä. Tuloksen mukaan MI-funktio tulisi sijoittaa yrityksen asiakasrajapintaan sekä tukea yksiköiden välistä integraa-tiota. Markkinaälyn jakaminen yrityksen sisällä vaatii käytäntöjen, tarpeiden ja ta-voitteiden systemaattista viestintää eri organisaatiotasoille, jotta yritys voi edelleen saada asiakkaalta tarpeeseen vastaavaa tietoa. Viestintä yrityksen ja asiakkaan välil-lä on oltava molemminpuolista, jotta tulokset voisivat parantaa asiakassuhdetta. Kun asiakassuhde paranee, yritys voi oppia asiakkaalta arvokasta tietoa, markkinaälyä.

A geological and topographical sketch map of the New York and Westmoreland Gas Coal Company's lands, at Manor Sta., Westm'd Co., Pa.

Kartta kuuluu A. E. Nordenskiöldin kokoelmaan

Influence of Pulsed-Electric Field Irradiation in Crystallization

The growing pharmaceutical interest, among others, in the polymorphic composition of the emerging solid end-products from production processes has been traced to the need for attainment of high product purity. This is more so as the presence of different polymorphs may constitute physical impurity of the product. Hence, the need for optimization of the yield of desired product component(s) through controlled crystallization kinetics for instance. This study was carried out to investigate the impact of pulsed electric field (PEF) irradiation on the crystal morphology of glycine obtained by cooling crystallization (without seeding) from commercial glycine sample in distilled deionized water solution. In doing so, three different pulse frequencies (294, 950 and 145 Hz) and a case without PEF were studied at three cooling rates (5, 10 and 20 ºC/h). The crystal products obtained were analyzed for polymorphic composition by powder x-ray diffraction (PXRD) and Fourier transform infrared (FTIR) spectroscopy while the particles characterization was done on Morphologi G3. The results obtained from this study showed that pulsed electric field irradiation had significant impact on metastability of the aqueous solution as well as on the polymorphic composition of the end product. With increasing PEF frequency applied, nucleation started earlier and the γ-glycine polymorph content of the product crystals increased. These were found to have been aided by cooling rate, as the most significant effect was observed at 5 ºC/h. It was also discovered that PEF application had no measurable impact on the pH of the aqueous solution as well as the size distribution of the particles. Cooling on the contrary was believed to be responsible for the broadening of the particle size distribution with a downward shift of the lower limit of the raw material from about 100 μm to between 10 and 50 μm.

Craft distillery internationalization - Case: Kyrö Distillery Company

The purpose of this thesis is to identify attractive foreign markets for Kyrö Distillery Company. A small company with limited resources, it needs to make the right choices in their internationalization process to be able to succeed. Market research is needed. The amassed theory at the beginning gives insight and a general framework that we follow later in the empirical part; should they go abroad, where should the go and how are answered. After analyzing the company, the industry and all the necessary forces affecting the environment it was evident that they are ready to start their internationalization process and that the time is opportune. They have a quality brand that will not shy away even under closer inspection and their biggest impediment is access to distribution channels. After concluding that the company is fit to enter foreign markets a system of ranking countries in our target region was formed. Market data was painstakingly collected and analyzed resulting in an a priori list of attractive foreign market options to aid in the company's decision making. Finally we concluded that according to the transaction cost theory, it is beneficial for Kyrö Distillery Company to engage in partnerships, where local companies handle logistics and sales on their behalf.

Towards sustainable transport: A comparison of demographic and behavioural characteristics of Finnish and international car sharing users

SStrong evidence suggests that the climate is changing and that these changes are largely caused by human activities. A consensus exists among researchers that human activity is causing global warming and that actions to mitigate global warming need to be taken swiftly. The transportation sector, which relies heavily on fossil fuel burning and primarily oil, is one of the big contributors to air pollution problems at local, regional and global levels. It is the fastest growing source of greenhouse gas emissions and is estimated to be responsible for nearly a quarter of global energyrelated carbon dioxide emissions. Car sharing is a mobility solution encouraging its users to decrease private car usage in favour of communal transit and environmental goals. The idea of car sharing originates from the aspiration to decrease personal car ownership and to reduce vehicle distance travelled. This thesis seeks to complement the understanding of Finnish car sharing users and their usage through better categorization. Through better categorization and segmentation of Finnish car sharing users the thesis seeks to provide information for improved marketing insight. Research is done on the demographic and behavioural characteristics of Finnish car sharing users and they are compared with international findings about the characteristics of International car sharing users. The main research problem is Are Finnish car sharing users similar to international ones? A theoretical research framework on the determinants of individual car sharing usage is built based on international research about demographic and behaviouristic characteristics. After this a quantitative survey is performed to the customers of a Finnish car sharing organization. The data analysed in the thesis consist out of 532 answers received from the car sharing organizations customers. The data is analysed with descriptive and other exploratory methods, which create an understanding of Finnish car sharing users. At the end of the analysis the demographic and behavioural characteristics of Finnish car sharing users are compared with international ones. The research findings of the thesis indicate that the demographic and behavioural characteristics of Finnish car sharing usage largely follow those of their international counterparts. Thanks to the thesis results the car sharing organization is able to better target their customers through improved marketing insight.

Vastuullisten hankintojen toteutuminen ja kehitys suomalaisissa yrityksissä

Kuluttajien valveutuminen ja globalisaatio 2000-luvulla lukeutuvat suurimpiin taustasyihin sille, että vastuullisuus on noussut entistä tärkeämpään rooliin yritysten toiminnassa. Hankinnat ovat tämän vastuullisen toiminnan kannalta yksi kriittisimpiä osa-alueita, sillä yrityksen on hallittava hankintaketjunsa hyvin pystyäkseen takaamaan vastuullisten toimipojen ulottumisen aina sen alkupäähän asti. Tämä Pro Gradu-tutkielma kartoittaa Suomen yritysten vastuullisten hankintojen nykytilaa ja sen kehitystä viimeisen vuosikymmenen aikana. Tavoitteena on selvittää, miten vastuullisia hankintoja toteutetaan tämän päivän suomalaisissa yrityksissä ja ovatko aiempien tutkimuksien havaitsemat ongelmat vielä olemassa ja jos ovat, niin missä mittakaavassa. Tämä tutkimus on toteutettu sähköisenä kyselytutkimuksena, joka lähetettiin eri alojen yrityksille ympäri Suomea. Suomalaisten yritysten hankintojen vastuullisuus on mennyt eteenpäin viime vuosikymmenen tilanteesta, mutta kasvu näyttäisi olevan enemmän määrällistä kuin laadullista. Vastuullisia hankintoja toteuttaa yhä useampi yritys, mutta samat ongelmat vaivaavat vielä suurta osaa kaikista yrityksistä. Puutteita löytyy erityisesti sopimusosaamisessa, dokumentoinnissa ja informaationkulussa.

Design and Drive-Cycle Based Analysis of Direct-Driven Permanent Magnet Synchronous Machine for a Small Urban Use Electric Vehicle

A direct-driven permanent magnet synchronous machine for a small urban use electric vehicle is presented. The measured performance of the machine at the test bench as well as the performance over the modified New European Drive Cycle will be given. The effect of optimal current components, maximizing the efficiency and taking into account the iron loss, is compared with the simple id=0 – control. The machine currents and losses during the drive cycle are calculated and compared with each other.