111 resultados para size spectrum
em Consorci de Serveis Universitaris de Catalunya (CSUC), Spain
Resumo:
he complex refractive index of SiO2 layers containing Si nanoclusters (Si-nc) has been measured by spectroscopic ellipsometry in the range from 1.5 to 5.0 eV. It has been correlated with the amount of Si excess accurately measured by x-ray photoelectron spectroscopy and the nanocluster size determined by energy-filtered transmission electron microscopy. The Si-nc embedded in SiO2 have been produced by a fourfold Si+ ion implantation, providing uniform Si excess aimed at a reliable ellipsometric modeling. The complex refractive index of the Si-nc phase has been calculated by the application of the Bruggeman effective-medium approximation to the composite media. The characteristic resonances of the refractive index and extinction coefficient of bulk Si vanish out in Si-nc. In agreement with theoretical simulations, a significant reduction of the refractive index of Si-nc is observed, in comparison with bulk and amorphous silicon. The knowledge of the optical properties of these composite layers is crucial for the realization of Si-based waveguides and light-emitting devices.
Resumo:
The complete Raman spectrum of SnO2 nanoparticles in presented and analyzed. In addition to the "classical" modes observed in the rutile structure, two other regions shown Raman activity for nanoparticles. The Raman bands in the low-frequency region are attributed to acoustic modes associated with the vibration of the individual nanoparticle as a whole. The high-frequency region is activated by surface disorder. A detailed analysis of these regions and the changes in the normal modes of SnO2 are presented as a function nanoparticle size.
Resumo:
The use of two-dimensional spectral analysis applied to terrain heights in order to determine characteristic terrain spatial scales and its subsequent use for the objective definition of an adequate grid size required to resolve terrain forcing are presented in this paper. In order to illustrate the influence of grid size, atmospheric flow in a complex terrain area of the Spanish east coast is simulated by the Regional Atmospheric Modeling System (RAMS) mesoscale numerical model using different horizontal grid resolutions. In this area, a grid size of 2 km is required to account for 95% of terrain variance. Comparison among results of the different simulations shows that, although the main wind behavior does not change dramatically, some small-scale features appear when using a resolution of 2 km or finer. Horizontal flow pattern differences are significant both in the nighttime, when terrain forcing is more relevant, and in the daytime, when thermal forcing is dominant. Vertical structures also are investigated, and results show that vertical advection is influenced highly by the horizontal grid size during the daytime period. The turbulent kinetic energy and potential temperature vertical cross sections show substantial differences in the structure of the planetary boundary layer for each model configuration
Resumo:
This paper assesses empirically the importance of size discrimination and disaggregate data for deciding where to locate a start-up concern. We compare three econometric specifications using Catalan data: a multinomial logit with 4 and 41 alternatives (provinces and comarques, respectively) in which firm size is the main covariate; a conditional logit with 4 and 41 alternatives including attributes of the sites as well as size-site interactions; and a Poisson model on the comarques and the full spatial choice set (942 municipalities) with site-specific variables. Our results suggest that if these two issues are ignored, conclusions may be misleading. We provide evidence that large and small firms behave differently and conclude that Catalan firms tend to choose between comarques rather than between municipalities. Moreover, labour-intensive firms seem more likely to be located in the city of Barcelona. Keywords: Catalonia, industrial location, multinomial response model. JEL: C250, E30, R00, R12
Resumo:
In this paper we explore the determinants of firm start-up size of Spanish manufacturing industries. The industries' barriers to entry affect the ability of potential entrants to enter the markets and the size range at which they decide to enter. In order to examine the relationships between barriers to entry and size we applied the quantile regression techniques. Our results indicate that the variables that characterize the structure of the market, the variables that are related to the behaviour of the incumbent firms and the rate of growth of the industries generate different barriers depending on the initial size of the entrants. Keywords: Entry, regression quantiles, start-up size. JEL classification: L110, L600
Resumo:
This paper concerns the effects of territorial factors on the processes involved in the creation of manufacturing firms in Spanish cities. Most contributions have focused on regional factors rather than urban ones. Here we assume that it is possible to identify certain urban factors that attract new firms. We use data for the entry of firms in Spanish manufacturing industries between 1994 and 2002. This paper contributes to the existing literature on market entry. Key words: cities, regions, firm entry and Spanish economy. JEL: R0, R12, L60
Resumo:
Much of the research on industry dynamics focuses on the interdependence between the sectorial rates of entry and exit. This paper argues that the size of firms and the reaction-adjustment period are important conditions missed in this literature. I illustrate the effects of this omission using data from the Spanish manufacturing industries between 1994 and 2001. Estimates from systems of equations models provide evidence of a conical revolving door phenomenon and of partial adjustments in the replacement-displacement of large firms. KEYWORDS: aggregation, industry dynamics, panel data, symmetry, simultaneity. JEL CLASSIFICATION: C33, C52, L60, L11
Resumo:
We present experimental and theoretical analyses of data requirements for haplotype inference algorithms. Our experiments include a broad range of problem sizes under two standard models of tree distribution and were designed to yield statistically robust results despite the size of the sample space. Our results validate Gusfield's conjecture that a population size of n log n is required to give (with high probability) sufficient information to deduce the n haplotypes and their complete evolutionary history. The experimental results inspired our experimental finding with theoretical bounds on the population size. We also analyze the population size required to deduce some fixed fraction of the evolutionary history of a set of n haplotypes and establish linear bounds on the required sample size. These linear bounds are also shown theoretically.
Resumo:
This paper investigates the extent to which the gap in total factor productivity between small and large firms is due to differences in the endowment of factors determining productivity and to the returns associated with these factors. We place particular emphasis on the contribution of differences in the propensity to innovate and in the use of skilled labor across firms of different size. Empirical evidence from a representative sample of Spanish manufacturing firms corroborates that both differences in endowments and returns to innovation and skilled labor significantly contribute to the productivity gap between small and large firms. In addition, it is observed that the contribution of innovation to this gap is caused only by differences in quantity, while differences in returns have no effect; in the case of human capital, however, most of the effect can be attributed to increasing differences in returns between small and large firms.
Resumo:
The study was performed in the installations of OCAS, a Steel Research Centre of ArcelorMittal. Taking M32 steel (3.25%Si+0.9%Al) as the basis chemical composition and three different thicknesses (0.35, 0.5 and 0.65mm), different annealing conditions (temperature and time) have been applied in the laboratory simulator at St. Chély, France. The aim was to link annealing parameters, grain size and energy loss. It was determined the optimum annealing parameters to reach the lowest power losses for three different grades of non-oriented fully processed electrical steel. In addition, M250-50 samples having different magnetic behaviour (high and low losses) but the same grain size and texture, have been analyzed in terms of TEM observations of their precipitates, in the University of Marseille. The results reveal that a high amount of medium and big precipitates (&10 nm) worsen the magnetic properties of the material. The small precipitates (&10nm) do not have a strong influence on the magnetic properties. The presence of precipitates can have a great influence on the power losses and further work is clearly necessary.
Resumo:
In this work we introduce and analyze a linear size-structured population model with infinite states-at-birth. We model the dynamics of a population in which individuals have two distinct life-stages: an “active” phase when individuals grow, reproduce and die and a second “resting” phase when individuals only grow. Transition between these two phases depends on individuals’ size. First we show that the problem is governed by a positive quasicontractive semigroup on the biologically relevant state space. Then we investigate, in the framework of the spectral theory of linear operators, the asymptotic behavior of solutions of the model. We prove that the associated semigroup has, under biologically plausible assumptions, the property of asynchronous exponential growth.
Resumo:
Motivated by the modelling of structured parasite populations in aquaculture we consider a class of physiologically structured population models, where individuals may be recruited into the population at different sizes in general. That is, we consider a size-structured population model with distributed states-at-birth. The mathematical model which describes the evolution of such a population is a first order nonlinear partial integro-differential equation of hyperbolic type. First, we use positive perturbation arguments and utilise results from the spectral theory of semigroups to establish conditions for the existence of a positive equilibrium solution of our model. Then we formulate conditions that guarantee that the linearised system is governed by a positive quasicontraction semigroup on the biologically relevant state space. We also show that the governing linear semigroup is eventually compact, hence growth properties of the semigroup are determined by the spectrum of its generator. In case of a separable fertility function we deduce a characteristic equation and investigate the stability of equilibrium solutions in the general case using positive perturbation arguments.
Resumo:
We introduce a model of redistributive income taxation and public expenditure. This joint treatment permits analyzing the interdependencies between the two policies: one cannot be chosen independently of the other. Empirical evidence reveals that partisan confrontation essentially falls on expenditure policies rather than on income taxation. We examine the case in which the expenditure policy (or the size of government) is chosen by majority voting and income taxation is consistently adjusted. This adjustment consists of designing the income tax schedule that, given the expenditure policy, achieves consensus among the population. The model determines the consensus in- come tax schedule, the composition of public expenditure and the size of government. The main results are that inequality is negatively related to the size of government and to the pro-rich bias in public expenditure, and positively or negatively related to the marginal income tax, depending on substitutability between government supplied and market goods. These implications are validated using OECD data.
Resumo:
"Vegeu el resum a l'inici del document del fitxer adjunt."