Finite-size scaling investigation of the liquid-liquid critical point in ST2 water and its stability with respect to crystallization.

The liquid-liquid critical point scenario of water hypothesizes the existence of two metastable liq- uid phases low-density liquid (LDL) and high-density liquid (HDL) deep within the supercooled region. The hypothesis originates from computer simulations of the ST2 water model, but the stabil- ity of the LDL phase with respect to the crystal is still being debated. We simulate supercooled ST2 water at constant pressure, constant temperature, and constant number of molecules N for N ≤ 729 and times up to 1 μs. We observe clear differences between the two liquids, both structural and dynamical. Using several methods, including finite-size scaling, we confirm the presence of a liquid-liquid phase transition ending in a critical point. We find that the LDL is stable with respect to the crystal in 98% of our runs (we perform 372 runs for LDL or LDL-like states), and in 100% of our runs for the two largest system sizes (N = 512 and 729, for which we perform 136 runs for LDL or LDL-like states). In all these runs, tiny crystallites grow and then melt within 1 μs. Only for N ≤ 343 we observe six events (over 236 runs for LDL or LDL-like states) of spontaneous crystal- lization after crystallites reach an estimated critical size of about 70 ± 10 molecules.

Precisiones interdisciplinares y conceptuales de los términos cyborg, clon humnao y robot

La palabra cyborg (del cyborg: cyber, cibernético y organism, organismo), designa una criatura compuesta de elementos orgánicos y mecánicos que mejoran las capacidades biológicas a través de la tecnología: es un individuo en parte hombre y en parte máquina.

Precisiones interdisciplinares y conceptuales de los términos cyborg, clon humnao y robot

La palabra cyborg (del cyborg: cyber, cibernético y organism, organismo), designa una criatura compuesta de elementos orgánicos y mecánicos que mejoran las capacidades biológicas a través de la tecnología: es un individuo en parte hombre y en parte máquina.

Mobile Robot Local Predictive Control under Perception Constraints

This research extends a previously developed work concerning about the use of local model predictive control in mobile robots. Hence, experimental results are presented as a way to improve the methodology by considering aspects as trajectory accuracy and time performance. In this sense, the cost function and the prediction horizon are important aspects to be considered. The platformused is a differential driven robot with a free rotating wheel. The aim of the present work is to test the control method by measuring trajectory tracking accuracy and time performance. Moreover, strategies for the integration with perception system and path planning are also introduced. In this sense, monocular image data provide an occupancy grid where safety trajectories are computed by using goal attraction potential fields

Mobile robot experimental modeling and control strategies using sensor fusion

This research work deals with the problem of modeling and design of low level speed controller for the mobile robot PRIM. The main objective is to develop an effective educational, and research tool. On one hand, the interests in using the open mobile platform PRIM consist in integrating several highly related subjects to the automatic control theory in an educational context, by embracing the subjects of communications, signal processing, sensor fusion and hardware design, amongst others. On the other hand, the idea is to implement useful navigation strategies such that the robot can be served as a mobile multimedia information point. It is in this context, when navigation strategies are oriented to goal achievement, that a local model predictive control is attained. Hence, such studies are presented as a very interesting control strategy in order to develop the future capabilities of the system. In this context the research developed includes the visual information as a meaningful source that allows detecting the obstacle position coordinates as well as planning the free obstacle trajectory that should be reached by the robot

Reconfigurable Architecture To Estimate The Motion Of An Underwater Vehicle

This work proposes a parallel architecture for a motion estimation algorithm. It is well known that image processing requires a huge amount of computation, mainly at low level processing where the algorithms are dealing with a great numbers of data-pixel. One of the solutions to estimate motions involves detection of the correspondences between two images. Due to its regular processing scheme, parallel implementation of correspondence problem can be an adequate approach to reduce the computation time. This work introduces parallel and real-time implementation of such low-level tasks to be carried out from the moment that the current image is acquired by the camera until the pairs of point-matchings are detected

Creació d’un model de simulació pels propulsors del robot submarí Girona 500 mitjançant CFD

S’arriba a un acord entre el grup de recerca GREFEMA i ViCOROB per estudiar els propulsors de palesutilitzats fins a l’actualitat en el robot submarí Girona 500, de forma que el model creatserveixi d’eina per apoder estudiar qualsevol tipus de propulsor que es vulgui fer servir.Es crearà un model de simulació amb CFD d’ANSYS per tal de poder recrear qualsevol situació ambqualsevol model de propulsor que es vulgui emprar, estalviant en costos de compra o fabricació, a mésd’evitar un muntatge experimental que pot no ser del tot fiable.A partir de geometries de propulsors de pales comercials existents es realitzarà una simulació amb elprograma de dinàmica de fluids computacional (CFD) d’ANSYS.La informació proporcionada per l’eina de simulació es compararan amb els resultats obtinguts de formaempírica a les instal•lacions del Parc Científic i Tecnològic de la Universitat de Girona i amb el model teòric.D’aquesta forma, es comprovarà la bondat de la simulació i es validarà el model numèric utilitzat

Anàlisi hidrodinàmic de vehicles submarins mitjançant eines de simulació CFD

El grup VICOROB de la UdG té una àmplia experiència en l’àmbit dels vehicles irobots submarins, amb diferents prototips degudament validats experimentalment.L’interès d’aquest grup de recerca és anar més enllà i conèixer exactament elcomportament del vehicle dins de l’aigua.El grup VICOROB disposa d’un vehicle subaquàtic, l’anomenat GIRONA 500 que haestat dissenyat com una plataformad'investigació amb capacitat per tornara configurar-se per a moltes aplicacionsdiferents, que van des dels clàssicssonar i servei d’imatges de vídeo fins atasques d'intervenció autònomesdifícilsL’objectiu és d’aquest projecte és obtenir a partir de la geometria real del vehicleGIRONA 500 els coeficients hidrodinàmics del submarí complet i de solamentl’estructura per així conèixer l’efecte hidrodinàmic del nombre de propulsors acoblats alrespectiu vehicle aquàtic

Augmented state Kalman filtering for AUV navigation

Addresses the problem of estimating the motion of an autonomous underwater vehicle (AUV), while it constructs a visual map ("mosaic" image) of the ocean floor. The vehicle is equipped with a down-looking camera which is used to compute its motion with respect to the seafloor. As the mosaic increases in size, a systematic bias is introduced in the alignment of the images which form the mosaic. Therefore, this accumulative error produces a drift in the estimation of the position of the vehicle. When the arbitrary trajectory of the AUV crosses over itself, it is possible to reduce this propagation of image alignment errors within the mosaic. A Kalman filter with augmented state is proposed to optimally estimate both the visual map and the vehicle position

Altruisme robòtic

L'altruisme és cabdal en l'evolució humana perque contribueix al fet que els nostres gens passin a la següent generació.

Profile Following for Inspection of Underwater Structures

We present a seabed profile estimation and following method for close proximity inspection of 3D underwater structures using autonomous underwater vehicles (AUVs). The presented method is used to determine a path allowing the AUV to pass its sensors over all points of the target structure, which is known as coverage path planning. Our profile following method goes beyond traditional seabed following at a safe altitude and exploits hovering capabilities of recent AUV developments. A range sonar is used to incrementally construct a local probabilistic map representation of the environment and estimates of the local profile are obtained via linear regression. Two behavior-based controllers use these estimates to perform horizontal and vertical profile following. We build upon these tools to address coverage path planning for 3D underwater structures using a (potentially inaccurate) prior map and following cross-section profiles of the target structure. The feasibility of the proposed method is demonstrated using the GIRONA 500 AUV both in simulation using synthetic and real-world bathymetric data and in pool trials

JXTA-Overlay P2P Platform and Its Application for Robot Control

The design of an efficient collaborative multirobot framework that ensures the autonomy and the individualrequirements of the involved robots is a very challenging task. This requires designing an efficient platform for inter-robot communication. P2P is a good approach to achieve this goal. P2P aims at making the communication ubiquitous thereby crossing the communication boundary and has many attractive features to use it as a platform for collaborative multi-robot environments. In this work, we present the JXTA Overlay P2P system and its application for robot control. Since JXTAOverlay is able to overcome Firewalls, Routers and NATs, it is possible to control end-devices in a WAN without changing the network security policy. We used JXTA-Overlay for the control of robot motors. We evaluated the proposed system by many experiments and have shown that the proposed system has a good performance and can be used successfully for the control of robot.

A programming environment having three levels of complexity for mobile robotics = Entorno de programación con tres niveles de complejidad para robótica móvil

This paper presents a programming environment for supporting learning in STEM, particularly mobile robotic learning. It was designed to maintain progressive learning for people with and without previous knowledge of programming and/or robotics. The environment was multi platform and built with open source tools. Perception, mobility, communication, navigation and collaborative behaviour functionalities can be programmed for different mobile robots. A learner is able to programme robots using different programming languages and editor interfaces: graphic programming interface (basic level), XML-based meta language (intermediate level) or ANSI C language (advanced level). The environment supports programme translation transparently into different languages for learners or explicitly on learners’ demand. Learners can access proposed challenges and learning interfaces by examples. The environment was designed to allow characteristics such as extensibility, adaptive interfaces, persistence and low software/hardware coupling. Functionality tests were performed to prove programming environment specifications. UV BOT mobile robots were used in these tests

Control de trajectòries òptimes en vehicles submarins : modelització d'un vehicle submarí i estudi de la seva controlabilitat i control òptim de la trajectòria sota linearització

Es modelitza un vehicle submarí i s'estudien diferents alternatives de control sota linearització sota l'assumpció d'una geometria d'elipsoide prolat, obtenint les gràfiques de l'estat i el control en un interval de temps.

An embedded real-time red peach detection system based on an OV7670 camera, ARM Cortex-M4 processor and 3D Look-Up Tables

This work proposes the development of an embedded real-time fruit detection system for future automatic fruit harvesting. The proposed embedded system is based on an ARM Cortex-M4 (STM32F407VGT6) processor and an Omnivision OV7670 color camera. The future goal of this embedded vision system will be to control a robotized arm to automatically select and pick some fruit directly from the tree. The complete embedded system has been designed to be placed directly in the gripper tool of the future robotized harvesting arm. The embedded system will be able to perform real-time fruit detection and tracking by using a three-dimensional look-up-table (LUT) defined in the RGB color space and optimized for fruit picking. Additionally, two different methodologies for creating optimized 3D LUTs based on existing linear color models and fruit histograms were implemented in this work and compared for the case of red peaches. The resulting system is able to acquire general and zoomed orchard images and to update the relative tracking information of a red peach in the tree ten times per second.