Infrared characterization of a-Si:H/a-Si1-xCx:H interfaces

Infrared spectroscopy was used to characterize three series of a-Si:H/a-Si1-xCx:H multilayers in which their geometrical parameters were varied. The infrared active vibrational groups in their spectra and the interference fringes in their absorption-free zone were studied to analyze the interfaces and the changes that are produced in very thin layers. Our results show that hydrogen is bonded to silicon only in monohydride groups. No additional hydrogen could be detected at these interfaces. The deposition of very thin a-Si1-xCx:H layers seems to affect their porous structure, making them denser.

Control of doped layers in p-i-n microcrystalline solar cells fully deposited with HWCVD

In this paper, the influence of the deposition conditions on the performance of p-i-n microcrystalline silicon solar cells completely deposited by hot-wire chemical vapor deposition is studied. With this aim, the role of the doping concentration, the substrate temperature of the p-type layer and of amorphous silicon buffer layers between the p/i and i/n microcrystalline layers is investigated. Best results are found when the p-type layer is deposited at a substrate temperature of 125 °C. The dependence seen of the cell performance on the thickness of the i layer evidenced that the efficiency of our devices is still limited by the recombination within this layer, which is probably due to the charge of donor centers most likely related to oxygen.

Estudi de noves estratègies encapsuladores d’antimalàrics i distribució de nanovectors polimèrics en Anopheles atroparvus

En aquest treball s’ha estudiat el comportament de compostos antimalàrics com els fàrmacs i els polímers en diferents situacions. Una de les barreres que ha estat identificada com a principal obstacle per a una millora de l’eficàcia dels compostos antimalàrics, és la limitació en la quantitat de fàrmac que pot ser encapsulada dins un liposoma, i que depèn de la seva solubilitat en medi aquós. Amb la inspiració de la descripció d’un nou tipus de nanocàpsules amb aplicacions oncològiques capaces d’encapsular grans quantitats de fàrmacs (protocells, Ashley et al., 2011). Els constructes formats per liposomes amb un nucli d’òxid de silici altament porós capaç de contenir el fàrmac, s’anomenen “protocells”, que en comparació als liposomes, tenen una major selectivitat i estabilitat, i permeten alliberar altes concentracions de droga directament al citosol de les cèl·lules cancerígenes. Aquest estudi es basa en la fabricació d’aquests nous nanovectors que continguin fàrmacs antimalàrics i té com a objectiu futur dirigir-los a eritròcits infectats per malària (pRBCs). Una altra part del treball és l’estudi de la distribució del polímer ISA-FITC en Anopheles atroparvus. Sabent que els polímers han estat utilitzats com a transportadors antimalàrics, es va pensar en l’opció d’eliminar el paràsit a dins del mateix mosquit, com una alternativa a tots el estudis realitzats fins ara centrats en les etapes d’infecció de l’hoste. Per aquest motiu es va idear l’experiment pensant en aquest polímer amb la intenció final de veure la seva localització en un mosquit Anopheles lliure del paràsit. OBJECTIUS: Determinació de la capacitat encapsuladora de tres tipus de nanopartícules, fabricades amb el mateix material però amb característiques de mida i càrrega diferents, incubant-les amb cinc fàrmacs antimalàrics. El blau de metilè, la primaquina, la cloroquina, la quinina i la curcumina, cadascun d’ells amb característiques de pH, solubilitat i estructura diferents. Alguns d’ells són fàrmacs que no s’han emprat en altres estudis degut a la seva toxicitat o elevada inespecificitat (la qual es pretén reduir un cop encapsulats en protocells). Construcció de “protocells” un cop determinada la millor nanopartícula encapsuladora i fàrmac candidat i determinació de la concentració de fàrmac que podien contenir, i el ritme d’alliberament d’aquest en PBS (simulant les condicions fisiològiques dels pRBCs). Estudi de la localització del polímer antimalàric ISA-FITC en l’anatomia del mosquit Anopheles Atroparvus. PROCEDIMENTS: Mètodes espectrofotomètrics Microscopia Cryo-electrònica de transmissió Microscopia confocal de fluorescència

Thin Film Transistors obtained by Hot-Wire CVD

Hydrogenated microcrystalline silicon films obtained at low temperature (150-280°C) by hot wire chemical vapour deposition at two different process pressures were measured by Raman spectroscopy, X-ray diffraction (XRD) spectroscopy and photothermal deflection spectroscopy (PDS). A crystalline fraction >90% with a subgap optical absortion 10 cm -1 at 0.8 eV were obtained in films deposited at growth rates >0.8 nm/s. These films were incorporated in n-channel thin film transistors and their electrical properties were measured. The saturation mobility was 0.72 ± 0.05 cm 2/ V s and the threshold voltage around 0.2 eV. The dependence of their conductance activation energies on gate voltages were related to the properties of the material.

Obtención de Si3N4 mediante SHS

En el presente trabajo se presentan los resultados obtenidos en el estudio de las reacciones de Síntesis Autopropagada a Alta Temperatura (Self-propagating High-temperature Synthesis, SHS) de Nitruro de Silicio. La síntesis autopropagada a alta temperatura consiste básicamente en la generación de reacciones altamente exotérmicas capaces de automantenerse. Se puede considerar como principal ventaja del método el ahorro energético que supone. La síntesis se realiza sobre una mezcla inicial de silicio metálico sobre la cual se realizan adiciones de diluyente y otros aditivos (sales amónicas) que afectan al desarrollo de la reacción. Se ha estudiado la influencia que en este sistema pueden tener las proporciones de las distintas incorporaciones en la mezcla, tanto en el material resultante como en las condiciones de reacción. Igualmente se ha estudiado la posibilidad de utilización de nuevos aditivos que puedan minimizar el impacto medio ambiental. Se presentan los estudios microestructurales del material obtenido, la identificación cristalográfica de las fases presentes así como los comportamientos de los parámetros que definen la propia reacción. Con la información obtenida se propone el mecanismo predominante de la síntesis del Nitruro de Silicio mediante SHS.

Dynamic range extension of SiPM detectors with the time-gated operation

The silicon photomultiplier (SiPM) is a novel detector technology that has undergone a fast development in the last few years, owing to its single-photon resolution and ultra-fast response time. However, the typical high dark count rates of the sensor may prevent the detection of low intensity radiation fluxes. In this article, the time-gated operation with short active periods in the nanosecond range is proposed as a solution to reduce the number of cells fired due to noise and thus increase the dynamic range. The technique is aimed at application fields that function under a trigger command, such as gated fluorescence lifetime imaging microscopy.

Structure of a-Si:H/a-Si1-xCx:H multilayers deposited in a reactor with automated substrate holder

This paper deals with the structural properties of a-Si:H/a-Si1-xCx: H multilayers deposited by glow-discharge decomposition of SiH4 and SiH4 and CH4 mixtures. The main feature of the rf plasma reactor is an automated substrate holder. The plasma stabilization time and its influence on the multilayer obtained is discussed. A series of a-Si:H/a-Si1-xCx: H multilayers has been deposited and characterized by secondary ion mass spectrometry (SIMS), X-ray diffraction (XRD) and transmission electron microscopy (TEM). No asymmetry between the two types of interface has been observed. The results show that the multilayers present a very good periodicity and low roughness. The difficulty of determining the abruptness of the multilayer at the nanometer scale is discussed.

On the longitudinal component of paraxial fields

The analysis of paraxial Gaussian beams features in most undergraduate courses in laser physics, advanced optics and photonics. These beams provide a simple model of the field generated in the resonant cavities of lasers, thus constituting a basic element for understanding laser theory. Usually, uniformly polarized beams are considered in the analytical calculations, with the electric field vibrating at normal planes to the propagation direction. However, such paraxial fields do not verify the Maxwell equations. In this paper we discuss how to overcome this apparent contradiction and evaluate the longitudinal component that any paraxial Gaussian beam should exhibit. Despite the fact that the assumption of a purely transverse paraxial field is useful and accurate, the inclusion of the above issue in the program helps students to clarify the importance of the electromagnetic nature of light, thus providing a more complete understanding of the paraxial approach.

On the physical realizability of highly focused electromagnetic field distributions

A method to evaluate the physical realizability of an arbitrary three-dimensional vectorial field distribution in the focal area is proposed. A parameter that measures the similarity between the designed (target) field and the physically achievable beam is provided. This analysis is carried out within the framework of the closest electromagnetic field to a given vectorial function, and the procedure is applied to two illustrative cases.

Design of highly focused fields that remain unpolarized on axis

Research on the properties of highly focused fields mainly involved fully polarized light, whereas partially polarized waves received less attention. The aim of this Letter is to provide an appropriate framework, for designing some features of the focused field, when dealing with incoming partially polarized beams. In particular, in this Letter, we describe how to get an unpolarized field on the axis of a high numerical aperture objective lens. Some numerical results that corroborate theoretical predictions are provided.

Optical Encryption using Photon-Counting Polarimetric Imaging

We present a polarimetric-based optical encoder for image encryption and verification. A system for generating random polarized vector keys based on a Mach-Zehnder configuration combined with translucent liquid crystal displays in each path of the interferometer is developed. Polarization information of the encrypted signal is retrieved by taking advantage of the information provided by the Stokes parameters. Moreover, photon-counting model is used in the encryption process which provides data sparseness and nonlinear transformation to enhance security. An authorized user with access to the polarization keys and the optical design variables can retrieve and validate the photon-counting plain-text. Optical experimental results demonstrate the feasibility of the encryption method.

Technological solution for the automatic replacement of the catalytic filaments in HWCVD

The degradation of the catalytic filaments is the main factor limiting the industrial implementation of the hot wire chemical vapor deposition (HWCVD) technique. Up to now, no solution has been found to protect the catalytic filaments used in HWCVD without compromising their catalytic activity. Probably, the definitive solution relies on the automatic replacement of the catalytic filaments. In this work, the results of the validation tests of a new apparatus for the automatic replacement of the catalytic filaments are reported. The functionalities of the different parts have been validated using a 0.2 mm diameter tungsten filament under uc-Si:H deposition conditions.

Degradation of thin tungsten filaments at high temperature in HWCVD

The degradation of the filaments is usually studied by checking the silicidation or carbonization status of the refractory metal used as catalysts, and their effects on the structural stability of the filaments. In this paper, it will be shown that the catalytic stability of a filament heated at high temperature is much shorter than its structural lifetime. The electrical resistance of a thin tungsten filament and the deposition rate of the deposited thin film have been monitored during the filament aging. It has been found that the deposition rate drops drastically once the quantity of dissolved silicon in the tungsten reaches the solubility limit and the silicides start precipitating. This manuscript concludes that the catalytic stability is only guaranteed for a short time and that for sufficiently thick filaments it does not depend on the filament radius.

Coexistence of Two Kinds of Fluorinated Hydrogenated Micelles as Building Blocks for the Design of Bimodal Mesoporous Silica with Two Ordered Mesopore Networks

A simple and effective route has been developed for the synthesis of bimodal (3.6 and 9.4 nm) mesoporous silica materials that have two ordered interconnected pore networks. Mesostructures have been prepared through the self assembly mechanism by using a mixture of polyoxyethylene fluoroalkyl ether and triblock copolymer as building block. The investigation of the RF8(EO)9/P123/water phase diagram evidences that in the considered surfactant range of concentrations, the system is micellar (L1). DLS measurements indicate that this micellar phase is composed of two types of micelles, the size of the first one at around 7.6 nm corresponds unambiguously to the pure fluorinated micelles. The second type of micelles at higher diameter consists of fluorinated micelles which have accommodated a weak fraction of P123 molecules. Thus, in this study the bimodal mesoporous silica are really templated by two kinds of micelles.

Tailored Jeffamine molecular tools for ordering mesoporous Silica

Herein, we report the formation of organized mesoporous silica materials prepared from a novel nonionic gemini surfactant, myristoyl-end capped Jeffamine, synthesized from a polyoxyalkyleneamine (ED900). The behavior of the modified Jeffamine in water was first investigated. A direct micellar phase (L1) and a hexagonal (H1) liquid crystal were found. The structure of the micelles was investigated from the SAXS and the analysis by Generalized Indirect Fourier Transformation (GIFT), which show that the particles are globular of coreshell type. The myristoyl chains, located at the ends of the amphiphile molecule are assembled to form the core of the micelles and, as a consequence, the molecules are folded over on themselves. Mesoporous materials were then synthesized from the self-assembly mechanism. The recovered materials were characterized by SAXS measurements, nitrogen adsorptiondesorption analysis, transmission and scanning electron microscopy. The results clearly evidence that by modifying the synthesis parameters, such as the surfactant/silica precursor molar ratio and the hydrothermal conditions, one can control the size and the nanostructuring of the resulting material. It was observed that, the lower the temperature of the hydrothermal treatment, the better the mesopore ordering.