Influência da humidade no comportamento mecânico de compósitos de madeira-plástico

As crescentes questões ambientais têm vindo a impor, entre outras, a necessidade da reciclagem dos desperdícios produzidos por diversos setores (agricultura, indústria e serviços). Nesta ótica têm vindo a surgir um conjunto alargado de produtos compósitos que incluem os compósitos de madeira-plástico (Wood Plastic Composites). Estes compósitos têm vindo a competir com os produtos de madeira em diversos nichos de mercado, sendo o maior deles os revestimentos de piso em ambiente exterior, vulgarmente designados de deckings. Estes compósitos são comercializados salientando as suas vantagens relativamente à madeira maciça, como seja maior durabilidade biológica e menor variabilidade de propriedades mecânicas e físicas. No final do ano 2013 e início de 2014, foram reportadas uma série de anomalias na aplicação de réguas de compósitos madeira-plástico, nomeadamente a diminuição do desempenho físico e mecânico destes materiais, quando sujeitos a períodos prolongados de humidificação. Embora, para a maioria dos casos reportados, estas anomalias se devam a condições deficientes de aplicação, a possibilidade de alteração de características à flexão, quando sujeitos a condições de uma aplicação exterior, ainda não se encontra bem estudada. Na presente dissertação são avaliados e apresentados os efeitos no comportamento à flexão de três tipos diferentes de réguas de compósito madeira-plástico, quando sujeitos a condições de humidade permanente ou cíclica. Para este efeito, foram conduzidos um conjunto de ensaios, nomeadamente, de flexão para determinação da pré-carga, de resistência à humidade e de variação dimensional e de módulo de elasticidade devido à imersão em água e a ambiente húmido. Posteriormente, os resultados obtidos foram sujeitos a uma verificação aos Estados Limite de Serviço. Os resultados revelaram reduzidas variações dimensionais (inchamento) e perdas significativas de módulo de elasticidade, apenas devido à exposição a elevados níveis de humidade, mostrando-se o caso de exposição prolongada a água líquida o mais gravoso. Relativamente aos Estados Limite de Serviço, sobretudo a longo prazo, os resultados mostraram-se bastante gravosos, nomeadamente para o material de menor qualidade.

Lean performance measures in a supply chain

Dissertação para obtenção do Grau de Mestre em Engenharia e Gestão Industrial

Location model for CCA-treated - wood waste remediation units

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Ciência e Sistemas de Informação Geográfica

MASS CONSERVATION ENHANCEMENT OF FREE BOUNDARY FLOWS IN COMPOSITES MANUFACTURING

Undesirable void formation during the injection phase of the liquid composite molding process can be understood as a consequence of the non-uniformity of the flow front progression, caused by the dual porosity of the fiber perform. Therefore the best examination of the void formation physics can be provided by a mesolevel analysis, where the characteristic dimension is given by the fiber tow diameter. In mesolevel analysis, liquid impregnation along two different scales; inside fiber tows and within the spaces between them; must be considered and the coupling between these flow regimes must be addressed. In such case, it is extremely important to account correctly for the surface tension effects, which can be modeled as capillary pressure applied at the flow front. When continues Galerkin method is used, exploiting elements with velocity components and pressure as nodal variables, strong numerical implementation of such boundary conditions leads to ill-posing of the problem, in terms of the weak classical as well as stabilized formulation. As a consequence, there is an error in mass conservation accumulated especially along the free flow front. This article presents a numerical procedure, which was formulated and implemented in the existing Free Boundary Program in order to significantly reduce this error.

Mass Conservation Enhancement of Free Boundary Mesolevel Flows during LCM Processes of Composites Manufacturing

Undesirable void formation during the injection phase of the liquid composite moulding process can be understood as a consequence of the non-uniformity of the flow front progression, caused by the dual porosity of the fibre perform. Therefore the best examination of the void formation physics can be provided by a mesolevel analysis, where the characteristic dimension is given by the fibre tow diameter. In mesolevel analysis, liquid impregnation along two different scales; inside fibre tows and within the open spaces between them; must be considered and the coupling between these flow regimes must be addressed. In such case, it is extremely important to account correctly for the surface tension effects, which can be modelled as capillary pressure applied at the flow front. Numerical implementation of such boundary conditions leads to ill-posing of the problem, in terms of the weak classical as well as stabilized formulation. As a consequence, there is an error in mass conservation accumulated especially along the free flow front. This contribution presents a numerical procedure, which was formulated and implemented in the existing Free Boundary Program in order to significantly reduce this error.

Preliminary study on the production of functionally graded materials by friction stir processing

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Mecânica

Production of aluminium based composites reinforced with embedded NiTi by friction stir welding

Dissertação para a obtenção do grau de Mestre em Engenharia Mecânica

Growing globally: Is it reasonable for Logoplaste to enter the Colombian rigid plastic packaging market?

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Landscape composition and climatic parameters significant in the spread of an invasive species (Pine wood Nematode)

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente

Electrochemical supercapacitors of conductive polymers and their composites

Dissertação Para Obtenção Do Grau De Mestre Em Bioorgânica

Strategy of Logoplaste in Mozambique's flexible plastic packaging industry

Logoplaste is a specialist in operating in-house industrial sites for manufacturing rigid plastic packaging containers. In developing countries, especially in Africa, the low income of consumers does not allow a widespread adoption of products typically sold in rigid plastic containers. In these countries the flexible packages are usually adopted as they allow for better ratios of cost/litter of product, particularly in smaller packages. Should Logoplaste offer this type of technology in order to expand into developing countries?

Cellulose-based composites as functional conductive materials for printed electronics

In this work, cellulose-based electro and ionic conductive composites were developed for application in cellulose based printed electronics. Electroconductive inks were successfully formulated for screen-printing using carbon fibers (CFs) and multi-walled carbon nanotubes (MWCNTs) as conductive functional material and cellulose derivatives working as binder. The formulated inks were used to fabricate conductive flexible and disposable electrodes on paper-based substrates. Interesting results were obtained after 10 printing passes and drying at RT of the ink with 10 % wt. of pristine CFs and 3% wt. of carboxymethyl cellulose (CMC), exhibiting a resistivity of 1.03 Ωcm and a resolution of 400 μm. Also, a resistivity of 0.57 Ωcm was obtained for only one printing pass using an ink based on 0.5 % wt. MWCNTs and 3 % wt. CMC. It was also demonstrated that ionic conductive cellulose matrix hydrogel can be used in electrolyte-gated transistors (EGTs). The electrolytes revealed a double layer capacitance of 12.10 μFcm-2 and ionic conductivity of 3.56x10-7 Scm-1. EGTs with a planar configuration, using sputtered GIZO as semiconducting layer, reached an ON/OFF ratio of 3.47x105, a VON of 0.2 V and a charge carrier mobility of 2.32 cm2V-1s-1.