Purification of complex biopharmaceuticals with new processes, advanced analytics and computer-aided process design tools

Dissertação para obtenção do Grau de Mestre em Biotecnologia

On-line system for faults detection in induction motors based on PCA

Dissertation to obtain the degree of Master in Electrical and Computer Engineering

O âmbito de aplicação material da legislação de proteção de dados pessoais e o tratamento de imagem por pessoa singular

Images have gained a never before seen importance. Technological changes have given the Information Society extraordinary means to capture, treat and transmit images, wheter your own or those of others, with or without a commercial purpose, with no boundaries of time or country, without “any kind of eraser”. From the several different ways natural persons may engage in image processing with no commercial purpose, the cases of sharing pictures through social networks and video surveillance assume particular relevance. Consequently there are growing legitimate concerns with the protection of one's image, since its processing may sometimes generate situations of privacy invasion or put at risk other fundamental rights. With this in mind, the present thesis arises from the question: what are the existent legal instruments in Portuguese Law that enable citizens to protect themselves from the abusive usage of their own pictures, whether because that image have been captured by a smartphone or some video surveillance camera, whether because it was massively shared through a blog or some social network? There is no question the one's right to not having his or her image used in an abusive way is protected by the Portuguese constitution, through the article 26th CRP, as well as personally right, under the article 79th of the Civil Code, and finally through criminal law, articles 192nd and 193rd of the Criminal Code. The question arises in the personal data protection context, considering that one's picture, given certain conditions, is personal data. Both the Directive 95/46/CE dated from 1995 as well as the LPD from 1998 are applicable to the processing of personal data, but both exclude situations of natural persons doing so in the pursuit of activities strictly personal or family-related. These laws demand complex procedures to natural persons, such as the preemptive formal authorisation request to the Data Protection National Commission. Failing to do so a natural person may result in the application of fines as high as €2.500,00 or even criminal charges. Consequently, the present thesis aims to study if the image processing with no commercial purposes by a natural person in the context of social networks or through video surveillance belongs to the domain of the existent personal data protection law. To that effect, it was made general considerations regarding the concept of video surveillance, what is its regimen, in a way that it may be distinguishable from Steve Mann's definition of sousveillance, and what are the associated obligations in order to better understand the concept's essence. The application of the existent laws on personal data protection to images processing by natural persons has been analysed taking into account the Directive 95/46/CE, the LPD and the General Regulation. From this analysis it is concluded that the regimen from 1995 to 1998 is out of touch with reality creating an absence of legal shielding in the personal data protection law, a flaw that doesn't exist because compensated by the right to image as a right to personality, that anyway reveals the inability of the Portuguese legislator to face the new technological challenges. It is urgent to legislate. A contrary interpretation will evidence the unconstitutionality of several rules on the LPD due to the obligations natural persons are bound to that violate the right to the freedom of speech and information, which would be inadequate and disproportionate. Considering the recently approved General Regulation and in the case it becomes the final version, the use for natural person of video surveillance of private spaces, Google Glass (in public and private places) and other similar gadgets used to recreational purposes, as well as social networks are subject to its regulation only if the images are shared without limits or existing commercial purposes. Video surveillance of public spaces in all situations is subject to General Regulation provisions.

Fatigue life assessment of endodontic instruments subjected to multi planar curvature

This present study aimed to investigate the fatigue life of unused (new) endodontic instruments made of NiTi with control memory by Coltene™ and subjected to the multi curvature of a mandibular first molar root canal. Additionally, the instrument‟s structural behaviour was analysed through non-linear finite element analysis (FEA). The fatigue life of twelve Hyflex™ CM files was assessed while were forced to adopt a stance with multiple radius of curvature, similar to the ones usually found in a mandibular first molar root canal; nine of them were subjected to Pecking motion, a relative movement of axial type. To achieve this, it was designed an experimental setup with the aim of timing the instruments until fracture while worked inside a stainless steel mandibular first molar model with relative axial motion to simulate the pecking motion. Additionally, the model‟s root canal multi-curvature was confirmed by radiography. The non-linear finite element analysis was conducted using the computer aided design software package SolidWorks™ Simulation, in order to define the imposed displacement required by the FEA, it was necessary to model an endodontic instrument with simplified geometry using SolidWorks™ and subsequently analyse the geometry of the root canal CAD model. The experimental results shown that the instruments subjected to pecking motion displayed higher fatigue life values and higher lengths of fractured tips than those with only rotational relative movement. The finite element non-linear analyses shown, for identical conditions, maximum values for the first principal stress lower than the yield strength of the material and those were located in similar positions to the instrument‟s fracture location determined by the experimental testing results.

A videovigilância no local de trabalho

The emergence of new technologies has introduced significant changes in the citizens life’s. There is a constant evolution of technological means and profound impact of their use in the habits of life of the human being. These new technological media are important tools in labor relations. The working and businesses worlds are increasingly turning to these new technologies, so that the use of video surveillance in the workplace is nowadays common. New technologies in general and the use of video surveillance in workplace in particular are providing ways to allow control of the work performance that are desired by most employers. However, the collection of images in the workplace often collides with the fundamental rights and freedoms of workers, in particular, with the right to privacy. The subject concerns the question of investigating is whether the images collected in workplace can be used as evidence in disciplinary proceedings. In fact, this issue is controversial. Doctrine and jurisprudence defend, at least, two responses for the same question. Those who understand that the evidence may be admitted for not violate any right of the worker, and others who argue that the evidence should not be admitted in disciplinary office. In the Portuguese legal system, there is, even, a new intermediate theory that begins to be defended, that only on certain occasions the evidence may be admitted. The solution to this problem involves the study of employment law and data video surveillance processing. Analysis of workers fundamental rights is fundamental to come to a grounded conclusion.

A tradução de textos económico-financeiros de português para inglês: potencialidades da Plataforma ISTRION

Este Trabalho de Projeto tem como objetivo primordial analisar a tradução, de português para inglês, de textos económico-financeiros, utilizando a plataforma de Tradução Automática (TA) ISTRION. A tradução de conteúdos selecionados da Newsletter Económico-Financeira Maximus Report é efetuada com base na referida plataforma, complementada com outras ferramentas de apoio ao processamento linguístico que sejam consideradas relevantes. Visa-se igualmente com este Trabalho de Projeto analisar as potencialidades desta plataforma, bem como medir os resultados da tradução. Por último pretende-se enquadrar, testar, estudar e medir quais os critérios em que se poderá tornar mais eficiente a tradução destes textos.

Amorphous silicon e 3D sensors applied to object detection

Nowadays, existing 3D scanning cameras and microscopes in the market use digital or discrete sensors, such as CCDs or CMOS for object detection applications. However, these combined systems are not fast enough for some application scenarios since they require large data processing resources and can be cumbersome. Thereby, there is a clear interest in exploring the possibilities and performances of analogue sensors such as arrays of position sensitive detectors with the final goal of integrating them in 3D scanning cameras or microscopes for object detection purposes. The work performed in this thesis deals with the implementation of prototype systems in order to explore the application of object detection using amorphous silicon position sensors of 32 and 128 lines which were produced in the clean room at CENIMAT-CEMOP. During the first phase of this work, the fabrication and the study of the static and dynamic specifications of the sensors as well as their conditioning in relation to the existing scientific and technological knowledge became a starting point. Subsequently, relevant data acquisition and suitable signal processing electronics were assembled. Various prototypes were developed for the 32 and 128 array PSD sensors. Appropriate optical solutions were integrated to work together with the constructed prototypes, allowing the required experiments to be carried out and allowing the achievement of the results presented in this thesis. All control, data acquisition and 3D rendering platform software was implemented for the existing systems. All these components were combined together to form several integrated systems for the 32 and 128 line PSD 3D sensors. The performance of the 32 PSD array sensor and system was evaluated for machine vision applications such as for example 3D object rendering as well as for microscopy applications such as for example micro object movement detection. Trials were also performed involving the 128 array PSD sensor systems. Sensor channel non-linearities of approximately 4 to 7% were obtained. Overall results obtained show the possibility of using a linear array of 32/128 1D line sensors based on the amorphous silicon technology to render 3D profiles of objects. The system and setup presented allows 3D rendering at high speeds and at high frame rates. The minimum detail or gap that can be detected by the sensor system is approximately 350 μm when using this current setup. It is also possible to render an object in 3D within a scanning angle range of 15º to 85º and identify its real height as a function of the scanning angle and the image displacement distance on the sensor. Simple and not so simple objects, such as a rubber and a plastic fork, can be rendered in 3D properly and accurately also at high resolution, using this sensor and system platform. The nip structure sensor system can detect primary and even derived colors of objects by a proper adjustment of the integration time of the system and by combining white, red, green and blue (RGB) light sources. A mean colorimetric error of 25.7 was obtained. It is also possible to detect the movement of micrometer objects using the 32 PSD sensor system. This kind of setup offers the possibility to detect if a micro object is moving, what are its dimensions and what is its position in two dimensions, even at high speeds. Results show a non-linearity of about 3% and a spatial resolution of < 2µm.

Desenvolvimento de uma plataforma de informação para orçamentação de produtos únicos: aplicação na industria de cablagens

O desenvolvimento da tecnologia informática e de melhor hardware, proporcionou ao mercado de aplicações informáticas, um grande crescimento nas últimas décadas. Paralelamente, o aprofundamento e investigação das disciplinas de engenharia industrial, de novas filosofias e tipologias de produção, proporcionam ao mercado de sistemas de informação, uma panóplia de soluções abrangentes a todos os sectores e departamentos das organizações. Apesar da grande oferta, nem sempre existe viabilidade financeira das organizações para adquirirem e/ ou implementarem uma solução eficaz que responda às suas necessidades específicas. A presente dissertação, incide na melhoria do sistema de orçamentação do produto numa indústria de produtos únicos, através de uma plataforma de informação que permita reduzir o tempo de elaboração, melhorando a estimação do tempo de produção. As exigências do mercado em causa, influenciadas pela concorrência de países com mão-de-obra mais barata, prazos de resposta a orçamentos muito curtos e pequenas margens de negociação e lucro, implicam a necessidade de que sejam minimizadas ao máximo as atividades sem valor acrescentado, como o caso da orçamentação. Foi elaborada uma análise à empresa, ao produto - cablagem, às operações e seus recursos em estudo de caso. Após o levantamento das operações de produção executadas na empresa, reuniram-se os tempos referentes aos tempos de elaboração de cada operação, tendo sido estes utilizados para melhorar a estimativa do tempo de produção. A plataforma de informação foi desenvolvida seguindo o processo produtivo de cablagens, princípios de orçamentação e algumas funcionalidades referentes a ferramentas de apoio à produção, tais como, Product Data Management, Computer Aided Design, Bill-of-Material e Visual Aid’s. Estruturada consoante as necessidades da empresa e respeitando a vasta gama de Matérias- Primas intervenientes na produção, a ferramenta desenvolvida proporcionou a redução do tempo de orçamentação e melhoria na estimativa dos tempos de produção. Esta ferramenta é no entanto transversal e com pequenas alterações, poderá ser implementada em qualquer outra indústria de produtos únicos.

Strategic design of There App’s business model: From product to multi-sided platform

The following work project illustrates the strategic issues There App, a mobile application, faces regarding the opportunity to expand from its current state as a product to a multisided platform. Initially, a market analysis is performed to identify the ideal customer groups to be integrated in the platform. Strategic design issues are then discussed on how to best match its value proposition with the identified market opportunity. Suggestions on how the company should organize its resources and operational processes to best deliver on its value proposition complete the work.