Mental health and neuroscience. A perspective from the magazine market

Mental health awareness has been rising worldwide, motivated by its social and economic costs. Despite the investment in research in neuroscience in the recent years, little is known about the underlying mechanisms in the brain that are correlated with psychiatric conditions. This project, through two feature articles suitable to be published in magazines, provides perspectives onto mental health research. First it presents an example where psychiatry joins forces with neuroscience and computer science in an interdisciplinary effort to improve the life of those affected by mental disorders. The second article gathers opinions which claim that mental health research priorities should be set by patients themselves, or even that people with lived experience of mental health issues should have an active role in that research. This project was planned and researched while I was an Erasmus student at Nottingham Trent University, in the United Kingdom.

Control of a white organic light emitting diode’s emission parameters using a single doped RGB active layer

White Color tuning is an attractive feature that Organic Light Emitting Diodes (OLEDs) offer. Up until now, there hasn’t been any report that mix both color tuning abilities with device stability. In this work, White OLEDs (W-OLEDs) based on a single RGB blend composed of a blue emitting N,N′-Di(1-naphthyl)-N,N′-diphenyl-(1,1′-biphenyl)-4,4′-diamine (NPB) doped with a green emitting Coumarin-153 and a red emitting 4-(Dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM1) dyes were produced. The final device structure was ITO/Blend/Bathocuproine (BCP)/ Tris(8-hydroxyquinolinato)aluminium (Alq3)/Al with an emission area of 0.25 cm2. The effects of the changing in DCM1’s concentration (from 0.5% to 1% wt.) allowed a tuning in the final white color resulting in devices capable of emitting a wide range of tunes – from cool to warm – while also keeping a low device complexity and a high stabilitty. Moreover, an explanation on the optoelectrical behavior of the device is presented. The best electroluminescense (EL) points toward 160 cd/m2 of brightness and 1.1 cd/A of efficiency, both prompted to being enhanced. An Impedance Spectroscopy (IS) analysis allowed to study both the effects of BCP as a Hole Blocking Layer and as an aging probe of the device. Finally, as a proof of concept, the emission was increased 9 and 64 times proving this structure can be effectively applied for general lighting.

Production and characterization of Chitin-Glucan Complex by Komagataella pastoris

This thesis was focused on the production, extraction and characterization of chitin:β-glucan complex (CGC). In this process, glycerol byproduct from the biodiesel industry was used as carbon source. The selected CGC producing yeast was Komagataella pastoris (formerly known as Pichia pastoris), due the fact that to achieved high cell densities using as carbon source glycerol from the biodiesel industry. Firstly, a screening of K. pastoris strains was performed in shake flask assays, in order to select the strain of K. pastoris with better performance, in terms of growth, using glycerol as a carbon source. K. pastoris strain DSM 70877 achieved higher final cell densities (92-97 g/l), using pure glycerol (99%, w/v) and in glycerol from the biodiesel industry (86%, w/v), respectively, compared to DSM 70382 strain (74-82 g/l). Based on these shake flask assays results, the wild type DSM 70877 strain was selected to proceed for cultivation in a 2 l bioreactor, using glycerol byproduct (40 g/l), as sole carbon source. Biomass production by K. pastoris was performed under controlled temperature and pH (30.0 ºC and 5.0, respectively). More than 100 g/l biomass was obtained in less than 48 h. The yield of biomass on a glycerol basis was 0.55 g/g during the batch phase and 0.63 g/g during the fed-batch phase. In order to optimize the downstream process, by increasing extraction and purification efficiency of CGC from K. pastoris biomass, several assays were performed. It was found that extraction with 5 M NaOH at 65 ºC, during 2 hours, associated to neutralization with HCl, followed by successive washing steps with deionised water until conductivity of ≤20μS/cm, increased CGC purity. The obtained copolymer, CGCpure, had a chitin:glucan molar ratio of 25:75 mol% close to commercial CGC samples extracted from A. niger mycelium, kiOsmetine from Kitozyme (30:70 mol%). CGCpure was characterized by solid-state Nuclear Magnetic Resonance (NMR) spectroscopy and Differential Scanning Calorimetry (DCS), revealing a CGC with higher purity than a CGC commercial (kiOsmetine). In order to optimize CGC production, a set of batch cultivation experiments was performed to evaluate the effect of pH (3.5–6.5) and temperature (20–40 ºC) on the specific cell growth rate, CGC production and polymer composition. Statistical tools (response surface methodology and central composite design) were used. The CGC content in the biomass and the volumetric productivity (rp) were not significantly affected within the tested pH and temperature ranges. In contrast, the effect of pH and temperature on the CGC molar ratio was more pronounced. The highest chitin: β-glucan molar ratio (> 14:86) was obtained for the mid-range pH (4.5-5.8) and temperatures (26–33 ºC). The ability of K. pastoris to synthesize CGC with different molar ratios as a function of pH and temperature is a feature that can be exploited to obtain tailored polymer compositions.(...)

User-centric product derivation in software product lines

Software Product Line (SPL) engineering aims at achieving efficient development of software products in a specific domain. New products are obtained via a process which entails creating a new configuration specifying the desired product’s features. This configuration must necessarily conform to a variability model, that describes the scope of the SPL, or else it is not viable. To ensure this, configuration tools are used that do not allow invalid configurations to be expressed. A different concern, however, is making sure that a product addresses the stakeholders’ needs as best as possible. The stakeholders may not be experts on the domain, so they may have unrealistic expectations. Also, the scope of the SPL is determined not only by the domain but also by limitations of the development platforms. It is therefore possible that the desired set of features goes beyond what is possible to currently create with the SPL. This means that configuration tools should provide support not only for creating valid products, but also for improving satisfaction of user concerns. We address this goal by providing a user-centric configuration process that offers suggestions during the configuration process, based on the use of soft constraints, and identifying and explaining potential conflicts that may arise. Suggestions help mitigating stakeholder uncertainty and poor domain knowledge, by helping them address well known and desirable domain-related concerns. On the other hand, automated conflict identification and explanation helps the stakeholders to understand the trade-offs required for realizing their vision, allowing informed resolution of conflicts. Additionally, we propose a prototype-based approach to configuration, that addresses the order-dependency issues by allowing the complete (or partial) specification of the features in a single step. A subsequent resolution process will then identify possible repairs, or trade-offs, that may be required for viabilization.

Introducing mapping standards in the quality assessment of buildings extracted from very high resolution satellite imagery

Many municipal activities require updated large-scale maps that include both topographic and thematic information. For this purpose, the efficient use of very high spatial resolution (VHR) satellite imagery suggests the development of approaches that enable a timely discrimination, counting and delineation of urban elements according to legal technical specifications and quality standards. Therefore, the nature of this data source and expanding range of applications calls for objective methods and quantitative metrics to assess the quality of the extracted information which go beyond traditional thematic accuracy alone. The present work concerns the development and testing of a new approach for using technical mapping standards in the quality assessment of buildings automatically extracted from VHR satellite imagery. Feature extraction software was employed to map buildings present in a pansharpened QuickBird image of Lisbon. Quality assessment was exhaustive and involved comparisons of extracted features against a reference data set, introducing cartographic constraints from scales 1:1000, 1:5000, and 1:10,000. The spatial data quality elements subject to evaluation were: thematic (attribute) accuracy, completeness, and geometric quality assessed based on planimetric deviation from the reference map. Tests were developed and metrics analyzed considering thresholds and standards for the large mapping scales most frequently used by municipalities. Results show that values for completeness varied with mapping scales and were only slightly superior for scale 1:10,000. Concerning the geometric quality, a large percentage of extracted features met the strict topographic standards of planimetric deviation for scale 1:10,000, while no buildings were compliant with the specification for scale 1:1000.

Analysis and design of sinusoidal quadrature RC-oscillators

Modern telecommunication equipment requires components that operate in many different frequency bands and support multiple communication standards, to cope with the growing demand for higher data rate. Also, a growing number of standards are adopting the use of spectrum efficient digital modulations, such as quadrature amplitude modulation (QAM) and orthogonal frequency division multiplexing (OFDM). These modulation schemes require accurate quadrature oscillators, which makes the quadrature oscillator a key block in modern radio frequency (RF) transceivers. The wide tuning range characteristics of inductorless quadrature oscillators make them natural candidates, despite their higher phase noise, in comparison with LC-oscillators. This thesis presents a detailed study of inductorless sinusoidal quadrature oscillators. Three quadrature oscillators are investigated: the active coupling RC-oscillator, the novel capacitive coupling RCoscillator, and the two-integrator oscillator. The thesis includes a detailed analysis of the Van der Pol oscillator (VDPO). This is used as a base model oscillator for the analysis of the coupled oscillators. Hence, the three oscillators are approximated by the VDPO. From the nonlinear Van der Pol equations, the oscillators’ key parameters are obtained. It is analysed first the case without component mismatches and then the case with mismatches. The research is focused on determining the impact of the components’ mismatches on the oscillator key parameters: frequency, amplitude-, and quadrature-errors. Furthermore, the minimization of the errors by adjusting the circuit parameters is addressed. A novel quadrature RC-oscillator using capacitive coupling is proposed. The advantages of using the capacitive coupling are that it is noiseless, requires a small area, and has low power dissipation. The equations of the oscillation amplitude, frequency, quadrature-error, and amplitude mismatch are derived. The theoretical results are confirmed by simulation and by measurement of two prototypes fabricated in 130 nm standard complementary metal-oxide-semiconductor (CMOS) technology. The measurements reveal that the power increase due to the coupling is marginal, leading to a figure-of-merit of -154.8 dBc/Hz. These results are consistent with the noiseless feature of this coupling and are comparable to those of the best state-of-the-art RC-oscillators, in the GHz range, but with the lowest power consumption (about 9 mW). The results for the three oscillators show that the amplitude- and the quadrature-errors are proportional to the component mismatches and inversely proportional to the coupling strength. Thus, increasing the coupling strength decreases both the amplitude- and quadrature-errors. With proper coupling strength, a quadrature error below 1° and amplitude imbalance below 1% are obtained. Furthermore, the simulations show that increasing the coupling strength reduces the phase noise. Hence, there is no trade-off between phase noise and quadrature error. In the twointegrator oscillator study, it was found that the quadrature error can be eliminated by adjusting the transconductances to compensate the capacitance mismatch. However, to obtain outputs in perfect quadrature one must allow some amplitude error.

Modeling and optimization of extracellular polysaccharides production by Enterobacter A47

Polysaccharides are gaining increasing attention as potential environmental friendly and sustainable building blocks in many fields of the (bio)chemical industry. The microbial production of polysaccharides is envisioned as a promising path, since higher biomass growth rates are possible and therefore higher productivities may be achieved compared to vegetable or animal polysaccharides sources. This Ph.D. thesis focuses on the modeling and optimization of a particular microbial polysaccharide, namely the production of extracellular polysaccharides (EPS) by the bacterial strain Enterobacter A47. Enterobacter A47 was found to be a metabolically versatile organism in terms of its adaptability to complex media, notably capable of achieving high growth rates in media containing glycerol byproduct from the biodiesel industry. However, the industrial implementation of this production process is still hampered due to a largely unoptimized process. Kinetic rates from the bioreactor operation are heavily dependent on operational parameters such as temperature, pH, stirring and aeration rate. The increase of culture broth viscosity is a common feature of this culture and has a major impact on the overall performance. This fact complicates the mathematical modeling of the process, limiting the possibility to understand, control and optimize productivity. In order to tackle this difficulty, data-driven mathematical methodologies such as Artificial Neural Networks can be employed to incorporate additional process data to complement the known mathematical description of the fermentation kinetics. In this Ph.D. thesis, we have adopted such an hybrid modeling framework that enabled the incorporation of temperature, pH and viscosity effects on the fermentation kinetics in order to improve the dynamical modeling and optimization of the process. A model-based optimization method was implemented that enabled to design bioreactor optimal control strategies in the sense of EPS productivity maximization. It is also critical to understand EPS synthesis at the level of the bacterial metabolism, since the production of EPS is a tightly regulated process. Methods of pathway analysis provide a means to unravel the fundamental pathways and their controls in bioprocesses. In the present Ph.D. thesis, a novel methodology called Principal Elementary Mode Analysis (PEMA) was developed and implemented that enabled to identify which cellular fluxes are activated under different conditions of temperature and pH. It is shown that differences in these two parameters affect the chemical composition of EPS, hence they are critical for the regulation of the product synthesis. In future studies, the knowledge provided by PEMA could foster the development of metabolically meaningful control strategies that target the EPS sugar content and oder product quality parameters.

O princípio da confidencialidade na mediação em matéria civil e comercial

The purpose of the following study is to analyze the relevance of the principle of confidentiality concerning mediation on civil and commercial matters developed in Portugal. We will, essentially, try to determine just how pivotal is this principle and how it affects the effectiveness of that method of alternative dispute resolution. We believe it is fundamental to understand the true extent of this principle and its goals, emphasizing the protection given to those who decide to resort to mediation and its impact on this process. For this dissertation, we have based our analysis on the interpretation of the set rules assembled by Law nr 29/2013, April 19th, while combining it with data gathered from other laws and regulations that had also addressed mediation. Furthermore, given the fact that this subject has been regulated by Directive 2008/52/EC, we deem pertinent to include references to other European mediation regulations, namely from Germany, Spain and France. With this study, we have established that, even though the Portuguese mediation law is based on a European Directive, we have determined a more restrictive regulation for the principle of confidentiality. We have concluded that the rules regarding this principle try to preserve, above all, the trust and honesty established during the course of the mediation, while restricting the possibility of using the information disclosed during these sessions on other cases. Additionally, we believe confidentiality is such a distinctive and relevant feature that its legal framework leads us to deem it as a true obstacle to the parties’ private autonomy and their power to determine how the mediation should be carried out.

How premium brands should do to upgrade and move to a luxury status

Premium brands’ upgrade process to luxury is a phenomenon still not well analysed. A literature review allowed assessment of what distinguishes premium and luxury brands. We infered five propositions then tested through a case study research. The research investigated three Portuguese brands that successfully moved from premium to luxury - Claus Porto, Josefinas and Vila Joya. We conclude that acquiring social status is the most essential and difficult feature to deal with, when migrating from premium to luxury as it depends on voluntary and involuntary factors.

Perylene Diimide acceptors: Fabrication and characterization of electron-only, hole-only devices and solar cells

The thrust towards energy conservation and reduced environmental footprint has fueled intensive research for alternative low cost sources of renewable energy. Organic photovoltaic cells (OPVs), with their low fabrication costs, easy processing and flexibility, represent a possible viable alternative. Perylene diimides (PDIs) are promising electron-acceptor candidates for bulk heterojunction (BHJ) OPVs, as they combine higher absorption and stability with tunable material properties, such as solubility and position of the lowest unoccupied molecular orbital (LUMO) level. A prerequisite for trap free electron transport is for the LUMO to be located at a level deeper than 3.7 eV since electron trapping in organic semiconductors is universal and dominated by a trap level located at 3.6 eV. Although the mostly used fullerene acceptors in polymer:fullerene solar cells feature trap-free electron transport, low optical absorption of fullerene derivatives limits maximum attainable efficiency. In this thesis, we try to get a better understanding of the electronic properties of PDIs, with a focus on charge carrier transport characteristics and the effect of different processing conditions such as annealing temperature and top contact (cathode) material. We report on a commercially available PDI and three PDI derivatives as acceptor materials, and its blends with MEH-PPV (Poly[2-methoxy 5-(2-ethylhexyloxy)-1,4-phenylenevinylene]) and P3HT (Poly(3-hexylthiophene-2,5-diyl)) donor materials in single carrier devices (electron-only and hole-only) and in solar cells. Space-charge limited current measurements and modelling of temperature dependent J-V characteristics confirmed that the electron transport is essentially trap-free in such materials. Different blend ratios of P3HT:PDI-1 (1:1) and (1:3) show increase in the device performance with increasing PDI-1 ratio. Furthermore, thermal annealing of the devices have a significant effect in the solar cells that decreases open-circuit voltage (Voc) and fill factor FF, but increases short-circuit current (Jsc) and overall device performance. Morphological studies show that over-aggregation in traditional donor:PDI blend systems is still a big problem, which hinders charge carrier transport and performance in solar cells.

Design of bio-inspired ionic liquids for protein stabilisation

Ionic Liquids (ILs) consist in organic salts that are liquid at/or near room temperature. Since ILs are entirely composed of ions, the formation of ion pairs is expected to be one essential feature for describing solvation in ILs. In recent years, protein - ionic liquid (P-IL) interactions have been the subject of intensive studies mainly because of their capability to promote folding/unfolding of proteins. However, the ion pairs and their lifetimes in ILs in P-IL thematic is dismissed, since the action of ILs is therefore the result of a subtle equilibrium between anion-cation interaction, ion-solvent and ion-protein interaction. The work developed in this thesis innovates in this thematic, once the design of ILs for protein stabilisation was bio-inspired in the high concentration of organic charged metabolites found in cell milieu. Although this perception is overlooked, those combined concentrations have been estimated to be ~300 mM among the macromolecules at concentrations exceeding 300 g/L (macromolecular crowding) and transient ion-pair can naturally occur with a potential specific biological role. Hence the main objective of this work is to develop new bio-ILs with a detectable ion-pair and understand its effects on protein structure and stability, under crowding environment, using advanced NMR techniques and calorimetric techniques. The choline-glutamate ([Ch][Glu]) IL was synthesized and characterized. The ion-pair was detected in water solutions using mainly the selective NOE NMR technique. Through the same technique, it was possible to detect a similar ion-pair promotion under synthetic and natural crowding environments. Using NMR spectroscopy (protein diffusion, HSQC experiments, and hydrogen-deuterium exchange) and differential scanning calorimetry (DSC), the model protein GB1 (production and purification in isotopic enrichment media) it was studied in the presence of [Ch][Glu] under macromolecular crowding conditions (PEG, BSA, lysozyme). Under dilute condition, it is possible to assert that the [Ch][Glu] induces a preferential hydration by weak and non-specific interactions, which leads to a significant stabilisation. On the other hand, under crowding environment, the [Ch][Glu] ion pair is promoted, destabilising the protein by favourable weak hydrophobic interactions , which disrupt the hydration layer of the protein. However, this capability can mitigates the effect of protein crowders. Overall, this work explored the ion-pair existence and its consequences on proteins in conditions similar to cell milieu. In this way, the charged metabolites found in cell can be understood as key for protein stabilisation.

Lexicultura na Língua Chinesa e na Lexicografia Bilingue de Chinês-Português

No contexto de internacionalização de hoje, acompanhando os contactos cada vez mais intensos entre o mundo chinês e o mundo lusófono, é exigida a maior atenção à questão da lexicultura na comunicação interlingual e intercultural, pois o que preocupa as partes envolvidas não é apenas descodificar os signos meramente linguísticos, mas também perceber a cultura que a língua, nomeadamente as unidades lexicais transportam, visando um comportamento culturalmente correto e adequado nessa comunicação. Partindo desta preocupação, este trabalho tenta, através da abordagem e análise da língua, da escrita e do léxico chineses, comprovar que o chinês, devido às suas peculiaridades inexistentes em outras línguas do mundo, constitui o vivo exemplo que exemplifica e alarga o conceito de lexicultura, pois a própria língua, sobretudo a sua escrita e as suas unidades lexicais, além de refletirem a cultura popular e partilhada, também contam verdadeiras histórias da Humanidade e da China. Baseando-se nesta abordagem e análise, a tese apresenta um novo modelo de dicionário cultural chinês-português, com propostas concretas de seleção de vedetas para a sua macroestrutura e de definição de vedetas na sua microestrutura, ao serviço da comunicação entre os dois mundos em questão.

A conspiracy theory for clefts : the syntax and interpretation of cleft constructions

O objetivo final deste estudo é contribuir para a discussão sobre qual a medida em que conceitos semânticos e discursivos estão sintaticamente codificados. Mais especificamente, investiga-se se existe alguma correlação consistente entre alguns aspetos interpretativos e sintáticos de quatro construções clivadas do Português Europeu, e como se deve dar conta teoricamente destas potenciais correlações. As clivadas consideradas são as clivadas canónicas, as pseudoclivadas, as clivadas de é que e as clivadas de SER. Sintaticamente podemos distinguir dois tipos: clivadas bioracionais (canónicas e pseudoclivadas) e clivadas mono-oracionais (clivadas de é que e de SER). Todas as estruturas têm um constituinte clivado focalizado que pode constituir tanto um foco informacional como um foco contrastivo, e uma oração clivada que introduz uma pressuposição existencial. Adicionalmente, o constituinte clivado identifica exaustivamente uma posição vazia na oração clivada. Adota-se a semântica alternativa para o foco (Rooth 1985), segundo a qual o foco entoacional contribui uniformemente um conjunto de alternativas na Forma Lógica. Regras pragmáticas operando neste conjunto dão origem a duas implicaturas que podem ser suspensas: pressuposição existencial e exaustividade. Dado que as clivadas de é que e as de SER têm a mesma interpretação que orações não-clivadas, conclui-se que a sua estrutura sintática particular não contribui para estas propriedades interpretativas. Em contrapartida, as clivadas bioracionais, que são orações copulativas especificacionais, têm uma presuposição existencial e uma interpretação exaustiva que não pode ser suspensa, tal como as orações especificacionais não-clivadas. Argumenta-se que isto se deve ao facto de o constituinte clivado identificar uma variável introduzida por uma descrição definida. Demonstra-se que a oração clivada, uma relativa em posição de complemento de um determinador definido nas clivadas canónicas e uma relativa livre nas pseudoclivadas, tem a mesma denotação que um DP definido, e portanto tem uma pressuposição existencial inerente. A interpretação exaustiva deve-se à relação identificacional entre o constituinte clivado e a descrição definida. Além disso, defende-se que em Português Europeu um traço de foco não desencadeia movimento-A’ para um FocP especializado. Os constituintes focalizados movem-se antes por razões independentes do foco. Isto é confirmado pelo facto de apenas o constituinte clivado das clivadas de é que ter propriedades de movimento A’, os outros parecem estar in situ. Propõe-se que o constituinte clivado das clivadas de é que é um tópico com um traço de foco que se move para um TopP. Esta análise dá conta da existência de restrições discursivas semelhantes para tópicos não focalizados e para o constituinte clivado das clivadas de é que. O traço quantificacional de foco arrastado pela topicalização dá origem a efeitos de intervenção, causando a não-recursividade do foco na periferia esquerda e a sua incompatibilidade com movimento de outros constituintes com traços quantificacionais. A análise prediz as restrições de encaixe observadas para as clivadas de é que. Finalmente, desenvolve-se uma análise sintática das clivadas de SER que aproxima estas estruturas das estruturas com partículas de foco. Propõe-se que a cópula é um operador sensível ao foco que é merged juntamente com o constituinte clivado. As restrições distribucionais da cópula devem-se a requisitos selecionais de núcleos.

Improving Millennium Bank's personal finance manager

Double Degree