39 resultados para comparative analysis

em Instituto Politécnico do Porto, Portugal


Relevância:

100.00% 100.00%

Publicador:

Resumo:

PURPOSE: To analyze and compare the Ground Reaction Forces (GRF), during the stance phase of walking in pregnant women in the 3rd trimester of pregnancy, and non pregnant women. METHODS: 20 women, 10 pregnant and 10 non pregnant, voluntarily took part in this study. GRF were measured (1000 Hz) using a force platform (BERTEC 4060-15), an amplifier (BERTEC AM 6300) and an analogical-digital converter of 16 Bits (Biopac). RESULTS: The study showed that there were significant differences among the two groups concerning absolute values of time of the stance phase. In what concerns to the normalized values the most significant differences were verified in the maximums values of vertical force (Fz3, Fz1) and in the impulse of the antero-posterior force (Fy2), taxes of growth of the vertical force, and in the period of time for the antero-posterior force (Fy) be null. CONCLUSIONS: It is easier for the pregnant to continue forward movement (push-off phase). O smaller growth rates in what concerns to the maximum of the vertical force (Fz1) for the pregnant, can be associated with a slower speed of gait, as an adaptation strategy to maintain the balance, to compensate the alterations in the position of her center of gravity due to the load increase. The data related to the antero-posterior component of the force (Fy), shows that there is a significant difference between the pregnant woman’s left foot and right foot, which accuses a different functional behavior in each one of the feet, during the propulsion phase (TS).

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Purpose – The aim of this article is to present some results from research undertaken into the information behaviour of European Documentation Centre (EDC) users. It will reflect on the practices of a group of 234 users of 55 EDCs covering 21 Member States of the European Union (EU), used to access European information. Design/methodology/approach – In order to collect the data presented here, five questionnaires were sent to users in all the EDCs in Finland, Ireland, Hungary and Portugal. In the remaining EU countries, five questionnaires were sent to two EDCs chosen at random. The questionnaires were sent by post, following telephone contact with the EDC managers. Findings – Factors determining access to information on the European Union and the frequency of this access are identified. The information providers most commonly used to access European information and the information sources considered the most reliable by respondents will also be analysed. Another area of analysis concerns the factors cited by respondents as facilitating access to information on Europe or, conversely, making it more difficult to access. Parallel to this, the aspects of accessing information on EU that are valued most by users will also be assessed. Research limitations/implications – Questionnaires had to be used, as the intention was to cover a very extensive geographical area. However, in opting for closed questions, it is acknowledged that standard responses have been obtained with no scope for capturing the individual circumstances of each respondent, thus making a qualitative approach difficult. Practical implications – The results provide an overall picture of certain aspects of the information behaviour of EDC users. They may serve as a starting point for planning training sessions designed to develop the skills required to search, access, evaluate and apply European information within an academic context. From a broader perspective, they also constitute factors which the European Commission should take into consideration when formulating its information and communication policy. Originality/value – This is the first piece of academic research into the EDCs and their users, which aimed to cover all Members State of the EU.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper presents some results of a survey on access to European information among a group of 234 users of 55 European Documentation Centres (EDCs), from 21 European Union (EU) Member-States. The findings of the questionnaire made to 88 EDCs' managers, from 26 EU Member-States, will also be analyse. Two different points of view regarding issues related to reasons to access European information, the valued aspects during that access and the use of European databases will be compare.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The characteristics of carbon fiber-reinforced plastics allow a very broad range of uses. Drilling is often necessary to assemble different components, but this can lead to various forms of damage, such as delamination which is the most severe. However, a reduced thrust force can decrease the risk of delamination. In this work, two variables of the drilling process were compared: tool material and geometry, as well as the effect of feed rate and cutting speed. The parameters that were analyzed include: thrust force, delamination extension and mechanical strength through open-hole tensile test, bearing test, and flexural test on drilled plates. The present work shows that a proper combination of all the factors involved in drilling operations, like tool material, tool geometry and cutting parameters, such as feed rate or cutting speed, can lead to the reduction of delamination damage and, consequently, to the enhancement of the mechanical properties of laminated parts in complex structures, evaluated by open-hole, bearing, or flexural tests.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

On-chip debug (OCD) features are frequently available in modern microprocessors. Their contribution to shorten the time-to-market justifies the industry investment in this area, where a number of competing or complementary proposals are available or under development, e.g. NEXUS, CJTAG, IJTAG. The controllability and observability features provided by OCD infrastructures provide a valuable toolbox that can be used well beyond the debugging arena, improving the return on investment rate by diluting its cost across a wider spectrum of application areas. This paper discusses the use of OCD features for validating fault tolerant architectures, and in particular the efficiency of various fault injection methods provided by enhanced OCD infrastructures. The reference data for our comparative study was captured on a workbench comprising the 32-bit Freescale MPC-565 microprocessor, an iSYSTEM IC3000 debugger (iTracePro version) and the Winidea 2005 debugging package. All enhanced OCD infrastructures were implemented in VHDL and the results were obtained by simulation within the same fault injection environment. The focus of this paper is on the comparative analysis of the experimental results obtained for various OCD configurations and debugging scenarios.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The current economic crisis has rushed even more the economists’ concerns to identify new directions for the sustainable development of the society. In this context, the human capital is crystallised as the key variable of the creative economy and of the knowledge-based society. As such, we have directed the research underlying this paper to identifying the most eloquent indicators of human capital to meet the demands of the knowledge-based society and sustainable development as well as towards achieving a comprehensive analysis of the human capital in the EU countries, respectively of a comparative analysis: Romania - Portugal. To carry out this paper, the methodology used is based on the interdisciplinary triangulation involving approaches from the perspective of human resource management, economy and economic statistics. The research techniques used consist of the content analysis and investigation of secondary data of international organisations accredited in the field of this research, such as: the United Nation Development Programme - Human Development Reports, World Bank - World Development Reports, International Labour Organisation, Eurostat, European Commission’s Eurobarometer surveys and reports on human capital. The research results emphasise both similarities and differences between the two countries under the comparative analysis and the main directions in which one has to invest for the development of human capital.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

The aim of this study was to undertake a comparative analysis of the practices and information behaviour of European information users who visit information units specialising in European information in Portugal and Spain. The study used a quantitative methodology based on a questionnaire containing closed questions and one open question. The questions covered the general sociological profile of the respondents and their use of European Document Centres, in addition to analysing aspects associated with information behaviour relating to European themes. The study therefore examined data on the preferred means and sources for accessing European information, types of documents and the subjects investigated most. The use of European databases and the Internet to access material on Europe was also studied, together with the reasons which users considered made it easy or difficult to access European information, and the aspects they valued most in accessing this information. The questionnaire was administered in European Document Centres in 2008 and 2010.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Dissertação de Mestrado em Finanças Empresariais

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Dissertação apresentada ao Instituto Superior de Contabilidade para a obtenção do Grau de Mestre em Auditoria Orientado por: Doutor Rodrigo Carvalho

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Dissertação apresentada com vista à obtenção do grau de Mestre em Tradução e Interpretação Especializada. Instituto Politécnico do Porto (Portaria nº 602/2003 de 21 Julho)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Adequate decision support tools are required by electricity market players operating in a liberalized environment, allowing them to consider all the business opportunities and take strategic decisions. Ancillary services (AS) represent a good negotiation opportunity that must be considered by market players. Based on the ancillary services forecasting, market participants can use strategic bidding for day-ahead ancillary services markets. For this reason, ancillary services market simulation is being included in MASCEM, a multi-agent based electricity market simulator that can be used by market players to test and enhance their bidding strategies. The paper presents the methodology used to undertake ancillary services forecasting, based on an Artificial Neural Network (ANN) approach. ANNs are used to day-ahead prediction of non-spinning reserve (NS), regulation-up (RU), and regulation down (RD). Spinning reserve (SR) is mentioned as past work for comparative analysis. A case study based on California ISO (CAISO) data is included; the forecasted results are presented and compared with CAISO published forecast.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Los congresos de medicina se destacan actualmente como uno de los eventos multilingües que se celebran con más frecuencia en el panorama internacional. Recurrir a los servicios de interpretación se revela como un hecho habitual entre los organizadores de estos encuentros, especialmente en determinados ámbitos nacionales. Por consiguiente, los congresos de medicina brindan grandes posibilidades laborales a los intérpretes de conferencias, sobre todo a aquellos cuya combinación lingüística es inglés-español, dado que el inglés se define, sin lugar a dudas, como la lengua por excelencia de la comunicación médica. No obstante, a pesar de esta demanda creciente en nuestra sociedad actual, los planteamientos académicos y profesionales siguen siendo, en gran medida, teóricos e intuitivos, fruto de experiencias personales, carentes en la mayoría de los casos de un respaldo empírico. Para corroborar o descartar ciertas presuposiciones establecidas a priori por estudiosos de la interpretación especializada, como pueden ser el uso de determinadas fuentes documentales y métodos de preparación, la evaluación de determinados parámetros de calidad o el nivel de especialización del intérprete, nos servimos de unas medidas de valoración retrospectivas en intérpretes profesionales especializados en congresos de medicina para verificar nuestro objetivo fundamental: en qué medida se alejan las teorías establecidas de la práctica profesional.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Dissertação de Mestrado apresentada ao Instituto de Contabilidade e Administração do Porto para obtenção do grau de Mestre em Tradução e Interpretação Especializadas, sob orientação de Doutora Maria Helena da Costa Alves Guimarães Ustimenko e Doutora Maria Manuela Ribeiro Veloso.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Introdução: Estudar os factores de risco cardiovasculares (FRCV), permitem tomar medidas preventivas em relação ao estado de saúde, contribuindo para a melhoria da qualidade de vida dos indivíduos e ajudando a prevenir a ocorrência de um evento cardiovascular. Objectivo: O principal objectivo deste estudo é comprovar se o programa de exercício físico supervisionado melhora a condição física e a capacidade funcional. Como objectivo secundário, foi analisada a correlação existente entre as diferentes variáveis, após realização do programa. Métodos: Vinte sujeitos de Arouca, constituíram a amostra do estudo, dividindo-se em grupo de controlo (n=10) e grupo experimental (n=10). Todos os indivíduos receberam informação para controlo e prevenção dos FRCV, através de palestras educacionais. Apenas o grupo experimental participou no programa de exercício, com a duração de 12 semanas / 36 sessões. Foi feito o levantamento e registo dos valores das provas de esforço (Frequência Cardíaca (FC) máxima, equivalente metabólicos (MET´s) máximos e duplo produto (DP) máximo), avaliação antropométrica (índice de massa corporal (IMC), perímetro abdominal, peso, gordura visceral, massa muscular, gordura total), FRCV (Tensão Arterial, colesterol total, colesterol HDL, triglicerídeos, proteína C reactiva) e os níveis de ansiedade e depressão antes e após o programa. Por fim, verificou-se a correlação entre as variáveis. Foi utilizada a estatística inferencial e um nível de significância de 5% (α=0,05). Resultados: Na análise comparativa intergrupo da variável diferença (MII-MI), registaram-se diminuições estatisticamente significativas da variável perímetro abdominal (p=0,02) e aumento estatisticamente significativo da variável MET´s máximo (p=0,01). As principais correlações foram encontradas entre as variáveis antropométricas: peso – gordura visceral (r2=0,824; p<0,001), peso – perímetro abdominal (r2=0,560; p=0,013), peso – IMC (r2=0,527; p=0,017), IMC – peímetro abdominal (r2=0,770; p=0,001). Conclusões: Conclui-se que o programa de exercício parece aumentar a tolerância ao esforço máximo e diminui o perímetro abdominal dos indivíduos em estudo.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Introduction: A major focus of data mining process - especially machine learning researches - is to automatically learn to recognize complex patterns and help to take the adequate decisions strictly based on the acquired data. Since imaging techniques like MPI – Myocardial Perfusion Imaging on Nuclear Cardiology, can implicate a huge part of the daily workflow and generate gigabytes of data, there could be advantages on Computerized Analysis of data over Human Analysis: shorter time, homogeneity and consistency, automatic recording of analysis results, relatively inexpensive, etc.Objectives: The aim of this study relates with the evaluation of the efficacy of this methodology on the evaluation of MPI Stress studies and the process of decision taking concerning the continuation – or not – of the evaluation of each patient. It has been pursued has an objective to automatically classify a patient test in one of three groups: “Positive”, “Negative” and “Indeterminate”. “Positive” would directly follow to the Rest test part of the exam, the “Negative” would be directly exempted from continuation and only the “Indeterminate” group would deserve the clinician analysis, so allowing economy of clinician’s effort, increasing workflow fluidity at the technologist’s level and probably sparing time to patients. Methods: WEKA v3.6.2 open source software was used to make a comparative analysis of three WEKA algorithms (“OneR”, “J48” and “Naïve Bayes”) - on a retrospective study using the comparison with correspondent clinical results as reference, signed by nuclear cardiologist experts - on “SPECT Heart Dataset”, available on University of California – Irvine, at the Machine Learning Repository. For evaluation purposes, criteria as “Precision”, “Incorrectly Classified Instances” and “Receiver Operating Characteristics (ROC) Areas” were considered. Results: The interpretation of the data suggests that the Naïve Bayes algorithm has the best performance among the three previously selected algorithms. Conclusions: It is believed - and apparently supported by the findings - that machine learning algorithms could significantly assist, at an intermediary level, on the analysis of scintigraphic data obtained on MPI, namely after Stress acquisition, so eventually increasing efficiency of the entire system and potentially easing both roles of Technologists and Nuclear Cardiologists. In the actual continuation of this study, it is planned to use more patient information and significantly increase the population under study, in order to allow improving system accuracy.