Film thickness in a ball-on-disc contact lubricated with greases, bleed oils and base oils

Three different lubricating greases and their bleed and base oils were compared in terms of film thickness in a ball-on-disc test rig through optical interferometry. The theoretical values calculated according to Hamrock's equation are in close agreement with the base oil film thickness measurements, which validates the selected experimental methodology. The grease and bleed oil film thickness under fully flooded lubrication conditions presented quite similar behaviour and levels. Therefore, the grease film thickness under full film conditions might be predicted using their bleed oil properties, namely the viscosity and pressure-viscosity coefficient. The base and bleed oil lubricant parameter LP are proportional to the measured film thickness. A relationship between grease and the corresponding bleed oil film thickness was evidenced.

Influence of grease rheology on thrust ball bearings friction torque

The friction torque and the operating temperatures in a thrust ball bearing were measured for seven different types of greases, including three biodegradable greases having low toxicity. These friction torque tests were performed using a modified Four-Ball machine. Rheological evaluations of the lubricating greases were made using a rheometer. Bleed oils were extracted from the greases and the dynamic viscosities were measured. In order to compare the performance of the lubricant greases in terms of friction, the grease characteristics were related to experimental results, showing that the interaction between thickener and base oil have strong influences in the bearing friction torque.

Friction and wear in thrust ball bearings lubricated with biodegradable greases

Thrust ball bearings lubricated with several different types of grease, including three biodegradable low-toxicity greases, were tested in a modified four-ball machine in order to evaluate the bearing friction torque. At the end of each test, grease samples were obtained and analysed through ferrography, allowing the quantification and evaluation of the bearing wear. In order to compare the grease performance in terms of friction and wear, a correlation between the grease characteristics (base oil, bleed oil, thickener structure, and rheological parameters) and the experimental results was established.

Friction torque in grease lubricated thrust ball bearings

Thrust ball bearings lubricated with several different greases were tested on a modified Four-Ball Machine, where the Four-Ball arrangement was replaced by a bearing assembly. The friction torque and operating temperatures in a thrust ball bearing were measured during the tests. At the end of each test a grease sample was analyzed through ferrographic techniques in order to quantify and evaluate bearing wear. A rolling bearing friction torque model was used and the coefficient of friction in full film lubrication was determined for each grease, depending on the operating conditions. The experimental results obtained showed that grease formulation had a very significant influence on friction torque and operating temperature. The friction torque depends on the viscosity of the grease base oil, on its nature (mineral, ester, PAO, etc.), on the coefficient of friction in full film conditions, but also on the interaction between grease thickener and base oil, which affected contact replenishment and contact starvation, and thus influenced the friction torque.

Ball Sensing in a Leg Like Robotic Kicker

The trend to have more cooperative play and the increase of game dynamics in Robocup MSL League motivates the improvement of skills for ball passing and reception. Currently the majority of the MSL teams uses ball handling devices with rollers to have more precise kicks but limiting the capability to kick a moving ball without stopping it and grabbing it. This paper addresses the problem to receive and kick a fast moving ball without having to grab it with a roller based ball handling device. Here, the main difficulty is the high latency and low rate of the measurements of the ball sensing systems, based in vision or laser scanner sensors.Our robots use a geared leg coupled to a motor that acts simultaneously as the kicking device and low level ball sensor. This paper proposes a new method to improve the capability for ball sensing in the kicker, by combining high rate measurements from the torque and energy in the motor and angular position of the kicker leg. The developed method endows the kicker device with an effective ball detection ability, validated in several game situations like in an interception to a fast pass or when chasing the ball where the relative speed from robot to ball is low. This can be used to optimize the kick instant or by the embedded kicker control system to absorb the ball energy.

21st century quality: Looking into the “Crystal ball”

The discussion of possible scenarios for the future of Quality is on the priority list of major Quality Practitioners Societies. EOQ – European Organization for Quality (EOQ, 2014) main team for its 58th EOQ-Congress held June 2014 in Göteborg was “Managing Challenges in Quality Leadership” and ASQ - American Society for Quality (ASQ, 2015) appointed “the Future of Quality” for Quality Progress Magazine November 2015 issue. In addition, the ISO 9001:2008 revision process carried by ISO/TC 176 aims to assure that ISO 9001:2015 International Standard remains stable for the next 10 years (ISO, 2014) contributing to an increased discussion on the future of quality. The purpose of this research is to review available Quality Management approaches and outline, adding an academic perspective, expected developments for Quality within the 21st Century. This paper follows a qualitative approach, although data from international organizations is used. A literature review has been undertaken on quality management past and potential future trends. Based on these findings a model is proposed for organization quality management development and propositions for the future of quality management are advanced. Firstly, a state of the art of existing Quality Management approaches is presented, for example, like Total Quality Management (TQM) and Quality Gurus, ISO 9000 International Standards Series (with an outline of the expected changes for ISO 9001:2015), Six Sigma and Business Excellence Models.Secondly, building on theoretical and managerial approaches, a two dimensional matrix – Quality Engineering (QE - technical aspects of quality) and Quality Management (QM: soft aspects of quality) - is presented, outlining five proposed characterizations of Quality maturity levels and giving insights for applications and future developments. Literature review highlights that QM and QE may be addressing similar quality issues but their approaches are different in terms of scope breadth and intensity and they ought to complement and reciprocally reinforce one another. The challenges organizations face within the 21st century have stronger uncertainty, complexity, and differentiation. Two main propositions are advanced as relevant for 21st Century Quality: - QM importance for the sustainable success of organizations will increase and they should be aware of the larger ecosystem to be managed for improvement, possibly leading to the emergence of a new Quality paradigm, The Civilizacional Excellence paradigm. - QE should get more attention from QM and the Quality professionals will have to: a) Master and apply in wider contexts and in additional depth the Quality Tools (basic, intermediate and advanced); b) Have the soft skills needed for its success; c) Be results oriented and better understand and demonstrate the relationships between approaches and results These propositions challenge both scholars and practitioners for a sustained and supported discussion on the future of Quality. “All things are ready, if our mind be so.” (Shakespeare, Henry V, circa 1599).

Relatório de estágio. Terapia manual ortopédica

Objectivo: Descrever a intervenção em fisioterapia aplicada num paciente com o diagnóstico de entorse da Tíbio-társica de grau III. Participantes e Métodos: Paciente que em 1 de Dezembro de 2009 na sequência de uma disputa de bola, sofreu uma entorse da tíbio-társica. Iniciou fisioterapia a 4 de Janeiro de 2010, tendo sido utilizadas para o tratamento técnicas de Mulligan, nomeadamente MWM, mobilização articular, reforço muscular e treino proprioceptivo. O tratamento foi realizado diariamente durante 6 semanas. Resultados: Após a aplicação das técnicas de Mulligan MWM na 1ªsemana, o perónio encontra-se devidamente reposicionado, no entanto o calcâneo ainda se encontra posteriorizado. No fim da 2ªsemana, a amplitude articular aumentou significativamente, aproximando-se dos valores do membro contralateral, verificouse um ganho de força muscular progressivo. Na 3ª e 4ª semana progrediu-se o tratamento em termos de fortalecimento muscular e treino proprioceptivo. Na 5ª semana apresentava amplitudes de movimento de 17º de dorsiflexão, 43º de flexãoplantar, 15º de eversão e 18º de inversão. Relativamente à força, o músculo tibial anterior apresentava um grau 5 de força, longo e curto peronial e flexores plantares grau 4+. No fim de 6 semanas, terminada a sua recuperação encontrava-se sem qualquer limitação funcional, igual força muscular bilateral e proprioceptividade normal. Conclusão: Foi salientado o processo de raciocínio clínico desenvolvido pelo fisioterapeuta ao longo das 6 semanas de intervenção: a recolha e interpretação dos dados da história, levantamento das primeiras hipóteses, testes dessas hipóteses no exame objectivo, estabelecimento de um diagnóstico funcional e construção e implementação de um plano de intervenção com a colaboração do utente que permitiram uma recuperação funcional que foi de encontro aos objectivos traçados.

O contributo da terapia ocupacional na análise dos ajustes posturais antecipatórios em crianças com 9 e 10 anos de idade, num sistema de captura de movimento - BioStage

O trabalho realizado teve como objetivo principal analisar os ajustes posturais antecipatórios que ocorrem durante o desempenho de uma tarefa motora fundamental (apanhar), em crianças entre os nove e os dez anos de idade, residentes no Porto e que apresentam um desenvolvimento normal com recurso ao sistema de captura e parametrização do movimento em tempo real BioStage ®. Como objetivo secundário pretendeu-se perceber de que forma este sistema pode ser uma ferramenta importante na prática clínica da terapia ocupacional. Para tal, realizou-se um estudo de natureza quantitativa e de carácter descritivo e recorreu-se a uma amostra de 12 crianças, utilizando o método de amostragem não probabilística por conveniência. A recolha de dados efetuou-se no sistema BioStage ® e foi pedido que realizassem quatro itens do subteste 5 do Bruininks-Oseretsky Test of Motor Proficiency (BOTMP) – receção bi e unilateral de uma bola com e sem ressalto no chão. Os resultados obtidos sugerem que as raparigas e as crianças mais novas demonstram ter menos estabilidade do tronco e pélvis ou menor capacidade de prever a trajetória da bola e que a receção unilateral foi mais difícil de efetuar pela maioria das crianças. Para concluir, refere-se que o BioStage ® mostra-se útil e é uma mais-valia, contribuindo de forma positiva para a prática da terapia ocupacional, uma vez que pode ser considerado como um complemento ao processo de avaliação pois faz uma análise detalhada, precisa e objetiva e identifica aspetos de difícil mensuração através da observação.

Lição

Comme pour la cérémonie d’ouverture des Jeux Olympiques de Londres le 27 juillet 2012, organisée par le réalisateur de Trainspotting et de Slumdog Millionaire Danny Boyle, qui fit une récapitulation de tous les grands événements qui identifient la Grande-Bretagne et sa population : l’invention de nombreux sports, la révolution industrielle, la reine d’Angleterre et James Bond, l’humour , la littérature , l’inventeur des www (world wide web), l’écographie, les Hôpitaux , les nurses et les nounous , la musique , je me propose de cerner l’identité et l’âme françaises grâce à leurs caractéristiques et à des clichés, complétés par des nouvelles d’actualité, sans pour autant faire un hymne à la France. Notons au passage que la 1ère langue des J.O est le français, en hommage au baron Pierre de Coubertin. L’Article 23 de la Charte du Comité International Olympique a donné au français le status de langue officielle (comme l’anglais) depuis les J.O d’Athènes de 2004. De plus, les sportifs français ont remporté 34 médailles, essentiellement en natation (avec des nageurs qui s’entrainent surtout à Nice et à Marseille), au pistolet, au judo, en saut à la perche, en équitation, en hand-ball, en volley ball féminin, en taekwondo féminin, en cyclisme féminin... ; nous n’avons rien gagné en escrime. Ils ont été encouragés par F. Hollande, par Christine Lagarde, Présidente du FMI, ex-membre de l’équipe de France de natation synchronisée et par la Ministre des sports Valérie Fourneyrou. Nos sportifs et leurs supporteurs sont rentrés en France par l’Eurostar. Pour intéresser la classe, je m’efforce de parler d’événements que nos élèves auront vu à la télé ou sur Internet afin que ceux-ci puissent participer et donner leur point de vue, en les poussant à vérifier leurs informations dans les médias actuels.

Controlo por computador de um sistema de levitação magnética

Ao longo deste projecto são efectuados vários passos para a realização de um sistema de levitação magnética controlado por computador. O objectivo deste projecto é a levitação de um objecto de material ferromagnético. Para a sua realização foi essencialmente necessário um electroíman, que exerce a força electromagnética sobre a bola, um circuito de potência para accionar o electroíman, um circuito sensor constituído por um LDR e por fim, o circuito constituído pelo PIC 18F4550. Para a comunicação entre o sistema e o PC foi estabelecida a comunicação série RS232. No que concerne ao controlo do sistema, foi aplicado um controlador PD e um controlador em avanço, ambos projectados directamente no domínio digital, através do método do Lugar de raízes. Posteriormente foi desenvolvida uma interface gráfica em ambiente MATLAB, para comunicação, via RS232, entre o PC e o sistema.

Sistema de Visão Stereo Ativo aplicado aos robôs do ISePorto

A presente dissertação endereça o desenvolvimento de um sistema de visão stereo ativo para os robôs de futebol robótico da equipa ISePorto do ISEP, de modo a que estes tirem o máximo partido das câmaras rotativas neles existentes. Este trabalho surge da necessidade de melhorar a capacidade de perceção do ambiente por parte dos robôs, principalmente da perceção da bola quando não está no plano do campo e dos robôs adversários. Esta necessidade surge devido ao aumento da dinâmica que se tem vindo a veri car ultimamente nas competições. Para tal, foram estudados algumas trabalhos relacionados no que diz respeito a sistemas de visão stereo com baselines variáveis e eixos de rotação em ambas as câmaras, bem como fundamentos de visão stereo. Foi proposta uma arquitetura para o sistema de visão ativo de modo a ser aplicado em qualquer robô da equipa MSL (Middle Size League). Para tornar possível a implementação desta arquitetura foi desenvolvido um procedimento para a calibração e determinação em tempo real dos parâmetros extrínsecos do par stereo em função da posição angular dos eixos rotativos do robô. O sistema de visão foi também dotado de capacidade de sincronismo e foram implementadas funcionalidades ao nível de software que possibilitam a deteção de objetos na imagem, a correspondência de objetos presentes nas imagens de ambas as câmaras e consequentemente a determinação das posições tridimensionais desses objetos relativamente ao robô. O sistema desenvolvido foi testado e validado em cenário MSL ao nível de perceção da bola, robôs adversários e linhas do campo. Os resultados obtidos apresentam uma melhoria signi cativa, face à implementação atual dos robôs, na perceção tridimensional da bola quando não está no plano do campo, e dos robôs adversários.

Mix design process of polyester polymer mortars modified with recycled GFRP waste materials

In this study, the effect of incorporation of recycled glass fibre reinforced plastics (GFRP) waste materials, obtained by means of shredding and milling processes, on mechanical behaviour of polyester polymer mortars (PM) was assessed. For this purpose, different contents of GFRP recyclates, between 4% up to 12% in weight, were incorporated into polyester PM materials as sand aggregates and filler replacements. The effect of the addition of a silane coupling agent to resin binder was also evaluated. Applied waste material was proceeding from the shredding of the leftovers resultant from the cutting and assembly processes of GFRP pultrusion profiles. Currently, these leftovers as well as non-conform products and scrap resulting from pultrusion manufacturing process are landfilled, with additional costs to producers and suppliers. Hence, besides the evident environmental benefits, a viable and feasible solution for these wastes would also conduct to significant economic advantages. Design of experiments and data treatment were accomplish by means of full factorial design approach and analysis of variance ANOVA. Experimental results were promising toward the recyclability of GFRP waste materials as partial replacement of aggregates and reinforcement for PM materials, with significant improvements on mechanical properties of resultant mortars with regards to waste-free formulations.

Distributed active traction control system applied to the RoboCup middle size league

This work addresses the problem of traction control in mobile wheeled robots in the particular case of the RoboCup Middle Size League (MSL). The slip control problem is formulated using simple friction models for ISePorto Team robots with a differential wheel configuration. Traction was also characterized experimentally in the MSL scenario for relevant game events. This work proposes a hierarchical traction control architecture which relies in local slip detection and control at each wheel, with relevant information being relayed to a higher level responsible for global robot motion control. A dedicated one axis control embedded hardware subsystem allowing complex local control, high frequency current sensing and odometric information procession was developed. This local axis control board is integrated in a distributed system using CAN bus communications. The slipping observer was implemented in the axis control hardware nodes integrated in the ISePorto robots and was used to control and detect loss of for traction. %and to detect the ball in the kicking device. An external vision system was used to perform a qualitative analysis of the slip detection and observer performance results are presented.

Wear resistance of TiAlSiN thin coatings

In the last decades TiAlN coatings deposited by PVD techniques have been extensively investigated but, nowadays, their potential development for tribological applications is relatively low. However, new coatings are emerging based on them, trying to improve wear behavior. TiAlSiN thin coatings are now investigated, analyzing if Si introduction increases the wear resistance of PVD films. Attending to the application, several wear test configurations has been recently used by some researchers. In this work, TiAlSiN thin coatings were produced by PVD Unbalanced Magnetron Sputtering technique and they were conveniently characterized using Scanning Electron Microscopy (SEM) provided with Energy Dispersive Spectroscopy (EDS), Atomic Force Microscopy (AFM), Electron Probe Micro-Analyzer (EPMA), Micro Hardness (MH) and Scratch Test Analysis. Properties as morphology, thickness, roughness, chemical composition and structure, hardness and film adhesion to the substrate were investigated. Concerning to wear characterization, two very different ways were chosen: micro-abrasion with ball-on-flat configuration and industrial non-standardized tests based on samples inserted in a feed channel of a selected plastic injection mould working with 30% (wt.) glass fiber reinforced polypropylene. TiAlSiN coatings with a small amount of about 5% (wt.) Si showed a similar wear behavior when compared with TiAlN reported performances, denoting that Si addition does not improve the wear performance of the TiAlN coatings in these wear test conditions.

Mechanical and tribological characterization of TiB2 thin films

Titanium Diboride (TiB2) presents high mechanical and physical properties. Some wear studies were also carried out in order to evaluate its tribological properties. One of the most popular wear tests for thin films is the ball-cratering configuration. This work was focused on the study of the tribological properties of TiB2 thin films using micro-abrasion tests and following the BS EN 1071-6: 2007 standard. Due to high hardness usually patented by these films, diamond was selected as abrasive on micro-abrasion tests. Micro-abrasion wear tests were performed under five different durations, using the same normal load, speed rotation and ball. Films were deposited by unbalanced magnetron sputtering Physical Vapour Deposition (PVD) technique using TiB2 targets. TiB2 films were characterized using different methods as Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS), Atomic Force Microscopy (AFM), X-ray Diffraction (XRD), Electron Probe Micro-Analyser (EPMA), Ultra Micro Hardness and Scratch-test Analysis, allowing to confirm that TiB2 presents adequate mechanical and physical properties. Ratio between hardness (coating and abrasive particles), wear resistance and wear coefficient were studied, showing that TiB2 films shows excellent properties for tribological applications.