A distributed system for learning programming on-line

Several Web-based on-line judges or on-line programming trainers have been developed in order to allow students to train their programming skills. However, their pedagogical functionalities in the learning of programming have not been clearly defined. EduJudge is a project which aims to integrate the “UVA On-line Judge”, an existing on-line programming trainer with an important number of problems and users, into an effective educational environment consisting of the e-learning platform Moodle and the competitive learning tool QUESTOURnament. The result is the EduJudge system which allows teachers to apply different pedagogical approaches using a proven e-learning platform, makes problems easy to search through an effective search engine, and provides an automated evaluation of the solutions submitted to these problems. The final objective is to provide new learning strategies to motivate students and present programming as an easy and attractive challenge. EduJudge has been tried and tested in three algorithms and programming courses in three different Engineering degrees. The students’ motivation and satisfaction levels were analysed alongside the effects of the EduJudge system on students’ academic outcomes. Results indicate that both students and teachers found that among other multiple benefits the EduJudge system facilitates the learning process. Furthermore, the experi- ment also showed an improvement in students’ academic outcomes. It must be noted that the students’ level of satisfaction did not depend on their computer skills or their gender.

Projecto secretaria on-line

Nos últimos anos o ISCAP, à semelhança de outras escolas do Ensino Superior, teve um aumento de população na ordem dos 100%. As suas estruturas administrativas, apesar de terem sido reforçadas, não tiveram um aumento na mesma proporção. Perante a incapacidade de resolução do problema a instituição adoptou a solução de informatizar os processos. Numa primeira fase, em 1997, foi implementado um sistema informático para apoio aos serviços administrativos. Apesar deste avanço havia ainda um outro passo a dar: o de melhorar a qualidade do serviço prestado aos estudantes. Em épocas de inscrição em exame ou de renovação de matrícula era necessário esperar horas numa fila para se ser atendido. Por isso, era urgente encontrar soluções que, pelo menos, reduzissem os tempos de espera. Em 1999 deu-se início ao desenvolvimento de um ambicioso projecto que pretendia “levar” a secretaria até aos estudantes e docentes através da Internet. Em Fevereiro de 2000 o serviço arranca com a denominação de “Secretaria On-Line”. Este serviço, no final da sua terceira fase, atingiu todos os objectivos delineados em 1999. A ligação do sistema com a rede de Multibanco, para pagamentos, permitiu eliminar as últimas arestas. Com o objectivo de facilitar o acesso à informação, parte deste serviço (informação de notas e propinas) também passou a estar também disponível através do canal telefone suportado por uma plataforma de atendimento automático. O serviço de mensagens SMS é outro canal de comunicação da escola com a sua comunidade. Posteriormente, a plataforma foi adoptada por outras escolas do IPP estando actualmente a dar suporte à generalidade dos processos académicos e lectivos. No caso da componente financeira da gestão de propinas, é utilizada por todas as escolas do IPP. O presente trabalho foca-se no projecto Secretaria On-Line fazendo uma descrição ao nível funcional, arquitectónico e tecnológico.

eTourism – Mobile Data Interface (Sistema de Apoio On-Line ao Turista em Dispositivos Móveis com Adaptação de Tours Personalizados)

O intuito principal desta Tese é criar um interface de Dados entre uma fonte de informação e fornecimento de Rotas para turistas e disponibilizar essa informação através de um sistema móvel interactivo de navegação e visualização desses mesmos dados. O formato tecnológico será portátil e orientado à mobilidade (PDA) e deverá ser prático, intuitivo e multi-facetado, permitindo boa usabilidade a públicos de várias faixas etárias. Haverá uma componente de IA (Inteligência Artificial), que irá usar a informação fornecida para tomar decisões ponderadas tendo em conta uma diversidade de aspectos. O Sistema a desenvolver deverá ser, assim, capaz de lidar com imponderáveis (alterações de rota, gestão de horários, cancelamento de pontos de visita, novos pontos de visita) e, finalmente, deverá ajudar o turista a gerir o seu tempo entre Pontos de Interesse (POI – Points os Interest). Deverá também permitir seguir ou não um dado percurso pré-definido, havendo possibilidade de cenários de exploração de POIs, sugeridos a partir de sugestões in loco, similares a Locais incluídos no trajecto, que se enquadravam no perfil dos Utilizadores. O âmbito geográfico de teste deste projecto será a zona ribeirinha do porto, por ser um ex-líbris da cidade e, simultaneamente, uma zona com muitos desafios ao nível geográfico (com a inclinação) e ao nível do grande número de Eventos e Locais a visitar.

Influence of wearing an unstable shoe construction on compensatory control of posture

This study investigated the influence of wearing unstable shoe construction (WUS) on compensatory postural adjustments (CPA) associated with external perturbations. Thirty-two subjects stood on a force platform resisting an anterior-posterior horizontal force applied to a pelvic belt via a cable, which was suddenly released. They stood under two conditions: barefoot and WUS. The electromyographic (EMG) activity of gastrocnemius medialis, tibialis anterior, rectus femoris, biceps femoris, rectus abdominis, and erector spinae muscles and the center of pressure (CoP) displacement were acquired to study CPA. The EMG signal was used to assess individual muscle activity and latency, antagonist co-activation and reciprocal activation at joint and muscle group levels. Compared to barefoot, WUS led to: (1) increased gastrocnemius medialis activity, (2) increased total agonist activity, (3) decreased antagonist co-activation at the ankle joint and muscle group levels, (4) increased reciprocal activation at the ankle joint and muscle group levels, and (5) decrease in all muscle latencies. No differences were observed in CoP displacement between conditions. These findings demonstrate that WUS led to a reorganization of the postural control system associated to improved performance of some components of postural control responses.

Influence of long-term wearing of unstable shoes on compensatory control of posture: An electromyography-based analysis

Purpose: This study investigated the influence of long-term wearing of unstable shoes (WUS) on compensatory postural adjustments (CPA) to an external perturbation. Methods: Participants were divided into two groups: one wore unstable shoes while the other wore conventional shoes for 8 weeks. The ground reaction force signal was used to calculate the anterior– posterior (AP) displacement of the centre of pressure (CoP) and the electromyographic signal of gastrocnemius medialis (GM), tibialis anterior (TA), rectus femoris (RF) and biceps femoris (BF) muscles was used to assess individual muscle activity, antagonist co-activation and reciprocal activation at the joint (TA/GM and RF/(BF + GM) pairs) and muscle group levels (ventral (TA + RF)/dorsal (GM + BF) pair) within time intervals typical for CPA. The electromyographic signal was also used to assess muscle latency. The variables described were evaluated before and after the 8-week period while wearing the unstable shoes and barefoot. Results: Long-term WUS led to: an increase of BF activity in both conditions (barefoot and wearing the unstable shoes); a decrease of GM activity; an increase of antagonist co-activation and a decrease of reciprocal activation level at the TA/GM and ventral/dorsal pairs in the unstable shoe condition. Additionally, WUS led to a decrease in CoP displacement. However, no differences were observed in muscle onset and offset. Conclusion: Results suggest that the prolonged use of unstable shoes leads to increased ankle and muscle groups’ antagonist co-activation levels and higher performance by the postural control system.

On-line self-healing of circuits implemented on reconfigurable FPGAs

To boost logic density and reduce per unit power consumption SRAM-based FPGAs manufacturers adopted nanometric technologies. However, this technology is highly vulnerable to radiation-induced faults, which affect values stored in memory cells, and to manufacturing imperfections. Fault tolerant implementations, based on Triple Modular Redundancy (TMR) infrastructures, help to keep the correct operation of the circuit. However, TMR is not sufficient to guarantee the safe operation of a circuit. Other issues like module placement, the effects of multi- bit upsets (MBU) or fault accumulation, have also to be addressed. In case of a fault occurrence the correct operation of the affected module must be restored and/or the current state of the circuit coherently re-established. A solution that enables the autonomous restoration of the functional definition of the affected module, avoiding fault accumulation, re-establishing the correct circuit state in real-time, while keeping the normal operation of the circuit, is presented in this paper.

On-line defragmentation for run-time partially reconfigurable FPGAs

Dynamically reconfigurable systems have benefited from a new class of FPGAs recently introduced into the market, which allow partial and dynamic reconfiguration at run-time, enabling multiple independent functions from different applications to share the same device, swapping resources as needed. When the sequence of tasks to be performed is not predictable, resource allocation decisions have to be made on-line, fragmenting the FPGA logic space. A rearrangement may be necessary to get enough contiguous space to efficiently implement incoming functions, to avoid spreading their components and, as a result, degrading their performance. This paper presents a novel active replication mechanism for configurable logic blocks (CLBs), able to implement on-line rearrangements, defragmenting the available FPGA resources without disturbing those functions that are currently running.

A comunicação on-line das ONGs e a angariação de fundos

Dissertação de Mestrado apresentado ao Instituto de Contabilidade e Administração do Porto para a obtenção do grau de Mestre em Marketing Digital, sob orientação da Mestre Inês Veiga Pereira “Esta versão contém as críticas e sugestões dos elementos do júri”

Optimizing potentiometric ionophore and electrode design for environmental on-site control of antibiotic drugs: Application to sulfamethoxazole

Potentiometric sensors are typically unable to carry out on-site monitoring of environmental drug contaminants because of their high limits of detection (LODs). Designing a novel ligand material for the target analyte and managing the composition of the internal reference solution have been the strategies employed here to produce for the first time a potentiometric-based direct reading method for an environmental drug contaminant. This concept has been applied to sulfamethoxazole (SMX), one of the many antibiotics used in aquaculture practices that may occur in environmental waters. The novel ligand has been produced by imprinting SMX on the surface of graphitic carbon nanostructures (CN) < 500 nm. The imprinted carbon nanostructures (ICN) were dispersed in plasticizer and entrapped in a PVC matrix that included (or not) a small amount of a lipophilic additive. The membrane composition was optimized on solid-contact electrodes, allowing near-Nernstian responses down to 5.2 μg/mL and detecting 1.6 μg/mL. The membranes offered good selectivity against most of the ionic compounds in environmental water. The best membrane cocktail was applied on the smaller end of a 1000 μL micropipette tip made of polypropylene. The tip was then filled with inner reference solution containing SMX and chlorate (as interfering compound). The corresponding concentrations were studied for 1 × 10−5 to 1 × 10−10 and 1 × 10−3 to 1 × 10−8 mol/L. The best condition allowed the detection of 5.92 ng/L (or 2.3 × 10−8 mol/L) SMX for a sub-Nernstian slope of −40.3 mV/decade from 5.0 × 10−8 to 2.4 × 10−5 mol/L.

Secretaria on-line from ISCAP

Like many other higher educat ion schools, ISCAP`s population has grown at a rate of almost 100% in the end of the twentieth century. Its administrative structures were reinforced, but it was not in the same proportion. Face to face with the inability to resolve the problem, the administration decided to implement a computer based system, available in the Internet. In a first stage, in 1997, the system was implemented as a services support. The next stage, in 1999, proposes to increase student services quality. A project that aims to bring student services available on the Internet begins to be developed.

Finite Element Analysis (FEA) applied to heat transfer optimization process of pultrusion die systems

The aim of this study is to optimize the heat flow through the pultrusion die assembly system on the manufacturing process of a specific glass-fiber reinforced polymer (GFRP) pultrusion profile. The control of heat flow and its distribution through whole die assembly system is of vital importance in optimizing the actual GFRP pultrusion process. Through mathematical modeling of heating-die process, by means of Finite Element Analysis (FEA) program, an optimum heater selection, die position and temperature control was achieved. The thermal environment within the die was critically modeled relative not only to the applied heat sources, but also to the conductive and convective losses, as well as the thermal contribution arising from the exothermic reaction of resin matrix as it cures or polymerizes from the liquid to solid condition. Numerical simulation was validated with basis on thermographic measurements carried out on key points along the die during pultrusion process.