Estudo e Implementação de Ferramentas Lean

Neste documento, apresenta-se o reflexo sobre o trabalho de estágio desenvolvido entre 17 de Fevereiro e 31 de Julho de 2014, nas instalações da Fábrica das Estruturas Metálicas da Faurecia, em São João da Madeira, num Projecto Final no âmbito de Implementação de Ferramentas Lean. O objetivo proposto foi a participação na procura e implementação de soluções, com vista à melhoria contínua do sistema de produção. Foi utilizado, para esse efeito, um vasto conjunto de ferramentas entre as quais os 5S, QRCI, Standardized Work, entre outras e amplamente empregues na indústria automóvel (e nesta empresa em particular), através do Sistema de Excelência Faurecia (FES), aplicado ao ramo de negócio onde está solidamente implantada esta multinacional de origem francesa. O período de tempo em que decorreu o estágio constituiu uma oportunidade única para o estagiário contactar com os problemas existentes no departamento de produção, num mercado tão concorrencial e competitivo como é o da indústria de componentes para automóveis. O presente trabalho de estágio apresenta duas vertentes distintas: uma de caráter interno à empresa e outra relativa aos fornecedores e clientes. Em termos internos, foi visível a batalha pela diminuição das variabilidades que surgem no plano da produção ao absorver grande parte do esforço dos agentes que trabalham na otimização dos processos. Externamente, observou-se a dificuldade em encontrar fornecedores adequados a satisfazer os aprovisionamentos da Faurecia, em quantidade e qualidade, e um elevado grau de exigência imposto por parte dos vários clientes. Por fim, este Projeto possibilitou a aplicação de conhecimentos adquiridos não só ao longo do curso como também durante a realização do estágio, o conhecimento da realidade industrial e o enriquecimento técnico e pessoal.

Factors of repatriates’ turnover: literature review

One of the important challenges for multinational organisations is to increase the ability to retain their repatriates. The literature review shows high turnover rates amongst repatriates in the first two years following return from the international assignment. This paper discusses organisation’s (in)ability to retain its repatriates. A diversity of predictable factors of repatriates’ turnover is identified, including factors related to the job, the organisation, qualification, career development, personality, social context and the market. The paper analysis organisational support practices designed to increase the power of retention and decrease the turnover. We concluded that research about retention versus turnover of repatriates is scarce, mainly regarding the role a formal repatriation and retention programme in facilitating the retention of these employees with acquired international knowledge and skills, that is, the role that organisational factors play in voluntary turnover decisions. Further research is suggested at the end of the article.

Ciência, Cultura, Teorias, Práticas, Objetos, Sentidos, Valores

Este artigo reflete, e corporiza ele mesmo, uma intersecção: entre ciência e cultura; entre experiência, experimentação, sentidos, sentido e significado; entre a pluralidade de argumentos sustentadores da expressão motriz e matriz ‘culturas experimentais’. Sustentando a necessidade de se transcender uma abordagem essencialista de ‘cultura’ ede transgredir delimitações dos conceitos ‘experiência’ e ‘experimentação’, os autores recorrem à ideia de ‘paisagem’ para designar a quebra dos dualismos teoria-prática e ação-pensamento. Isto dita o repensar das fronteiras entre linguagens disciplinares, em direção a uma ‘ecologia conceptual’que contribua para perspetivas mais amplas e integradoras dos campos educativo, profissional e científico-artístico-cultural.

Cultural adaptation of websites: a comparative study of portuguese and dutch corporate websites

Master Thesis Presented at Instituto de Contabilidade e Administração do Porto for obtaining the Master’s degree in Digital Marketing under the supervision of Professor José de Freitas Santos

Aquaponics System - An EPS@ISEP 2014 Spring Project

The goal of this project, one of the proposals of the EPS@ISEP 2014 Spring, was to develop an Aquaponics System. Over recent years Aquaponics systems have received increased attention due to its possibilities in helping reduce strain on resources within 1st and 3rd world countries. Aquaponics is the combination of Hydroponics and Aquaculture and mimics a natural environment in order to successfully apply and enhance the understanding of natural cycles within an indoor process. By using this knowledge of natural cycles it was possible to create a system with the capabilities similar to that of a natural environment with the benefits of electronic adaptions to enhance the overall efficiency of the system. The multinational team involved in its development was composed of five students, from five countries and fields of study. This paper covers their solution, involving overall design, the technology involved and the benefits it could bring to the current market. The team was able to achieve the final rendered Computer Aided Design (CAD) drawings, successfully performed all the electronic testing, and designed a solution under budget. Furthermore, the solution presented was deeply studied from the sustainability viewpoint and the team also developed a product specific marketing plan. Finally, the students involved in this project obtained new knowledge and skills.

Design and Development of a Solar Dryer for Microalgae Retrieval - An EPS@ISEP 2013 Spring Project

Currently excessive fossil fuel consumption has become a serious problem. People are searching for new solutions of energy production and there are several options to obtain alternative sources of energy without further devastating the already destroyed environment. One of these solutions is growing microalgae, from which biodiesel can be obtained. The microalgae production is a growing business because of its many useful compounds. In order to collect these compounds microalgae must first be harvested and then dried. Nowadays the solutions used for drying use too much energy and therefore are too expensive and not sustainable. The goal of this project, one of the possible choices during the EPS@ISEP 2013 Spring, was to develop a solar microalgae dryer. The multinational team involved in its development was composed of five students, from distinct countries and fields of study, and was the responsible for designing a solar microalgae dryer prototype for the microalgae laboratory of the chemical engineering department at ISEP, suitable for future tests and incorporating control process (in order not to destroy the microalgae during the drying process). The solar microalgae dryer was built to work as a distiller that gets rid of the excess water from the microalgae suspension. This paper presents a possible solution for this problem, the steps to create the device to harvest the microalgae by drying them with the use of solar energy (also used as an energy source for the solar dryer control system), the technologies used to build the solar microalgae dryer, and the benefits it presents compared to current solutions. It also presents the device from the ethical and sustainable viewpoint. Such alternative to already existing methods is competitive as far as energy usage is concerned.

Design and Implementation of a Biologically Inspired Flying Robot - An EPS@ISEP 2014 Spring Project

The goal of this EPS@ISEP project proposed in the Spring of 2014 was to develop a flapping wing flying robot. The project was embraced by a multinational team composed of four students from different countries and fields of study. The team designed and implemented a robot inspired by a biplane design, constructed from lightweight materials and battery powered. The prototype, called MyBird, was built with a 250 € budget, reuse existing materials as well as low cost solutions. Although the team's initial idea was to build a light radio controlled robot, time limitations along with setbacks involving the required electrical components led to a light but not radio controlled prototype. The team, from the experience gathered, made a number of future improvement suggestions, namely, the addition of radio control and a camera and the adoption of articulated monoplane design instead of the current biplane design for the wings.

Estudo da resistência de juntas adesivas em L entre alumínio e material compósito

As ligações adesivas são frequentemente utilizadas na fabricação de estruturas complexas que não poderiam ou não seriam tão fáceis de ser fabricadas numa só peça, a fim de proporcionar uma união estrutural que, teoricamente, deve ser pelo menos tão resistente como o material de base. As juntas adesivas têm vindo a substituir métodos como a soldadura, e ligações parafusadas e rebitadas, devido à facilidade de fabricação, menor custo, facilidade em unir materiais diferentes, melhor resistência, entre outras características. Os materiais compósitos reforçados com fibra de carbono são amplamente utilizados em muitas indústrias, tais como de construção de barcos, automóvel e aeronáutica, sendo usados em estruturas que requerem elevada resistência e rigidez específicas, o que reduz o peso dos componentes, mantendo a resistência e rigidez necessárias para suportar as diversas cargas aplicadas. Embora estes métodos de fabricação reduzam ao máximo as ligações através de técnicas de fabrico avançadas, estas ainda são necessárias devido ao tamanho dos componentes, limitações de projecto tecnológicas e logísticas. Em muitas estruturas, a combinação de compósitos com metais tais como alumínio ou titânio traz vantagens de projecto. Este trabalho tem como objectivo estudar, experimentalmente e por modelos de dano coesivo (MDC), juntas adesivas em L entre componentes de alumínio e compósito de carbono epóxido quando solicitados a forças de arrancamento, considerando diferentes configurações de junta e adesivos de ductilidade distinta. Os parâmetros geométricos abordados são a espessura do aderente de alumínio (tP2) e comprimento de sobreposição (LO). A análise numérica permitiu o estudo da distribuição das tensões, evolução do dano, resistência e modos de rotura. Os testes experimentais validam os resultados numéricos e fornecem mecanismos de projecto para juntas em L. Foi mostrado que a geometria do aderente em L (alumínio) e o tipo de adesivo têm uma influência directa na resistência de junta.

Developing an aquaponics system to learn sustainability and social compromise skills

The goal of this project, one of the proposals of the EPS@ISEP Spring 2014, was to develop an Aquaponics System. Over recent years Aquaponics systems have received increased attention since they contribute to reduce the strain on resources within 1st and 3rd world countries. Aquaponics is the combination of Hydroponics and Aquaculture, mimicking a natural environment in order to successfully apply and enhance the understanding of natural cycles within an indoor process. Using this knowledge of natural cycles, it was possible to create a system with capabilities similar to that of a natural environment with the support of electronics, enhancing the overall efficiency of the system. The multinational team involved in the development of this system was composed of five students from five countries and fields of study. This paper describes their solution, including the overall design, the technology involved and the benefits it can bring to the current market. The team was able to design and render the Computer Aided Design (CAD) drawings of the prototype, assemble all components, successfully test the electronics and comply with the budget. Furthermore, the designed solution was supported by a product sustainability study and included a specific marketing plan. Last but not least, the students enrolled in this project obtained new multidisciplinary knowledge and increased their team work and cross-cultural communication skills.

Learning sustainability by developing a solar dryer for microalgae retrieval

The development of nations depends on energy consumption, which is generally based on fossil fuels. This dependency produces irreversible and dramatic effects on the environment, e.g. large greenhouse gas emissions, which in turn cause global warming and climate changes, responsible for the rise of the sea level, floods, and other extreme weather events. Transportation is one of the main uses of energy, and its excessive fossil fuel dependency is driving the search for alternative and sustainable sources of energy such as microalgae, from which biodiesel, among other useful compounds, can be obtained. The process includes harvesting and drying, two energy consuming steps, which are, therefore, expensive and unsustainable. The goal of this EPS@ISEP Spring 2013 project was to develop a solar microalgae dryer for the microalgae laboratory of ISEP. A multinational team of five students from distinct fields of study was responsible for designing and building the solar microalgae dryer prototype. The prototype includes a control system to ensure that the microalgae are not destroyed during the drying process. The solar microalgae dryer works as a distiller, extracting the excess water from the microalgae suspension. This paper details the design steps, the building technologies, the ethical and sustainable concerns and compares the prototype with existing solutions. The proposed sustainable microalgae drying process is competitive as far as energy usage is concerned. Finally, the project contributed to increase the deontological ethics, social compromise skills and sustainable development awareness of the students.

mRPL: Boosting mobility in the Internet of Things

The 6loWPAN (the light version of IPv6) and RPL (routing protocol for low-power and lossy links) protocols have become de facto standards for the Internet of Things (IoT). In this paper, we show that the two native algorithms that handle changes in network topology – the Trickle and Neighbor Discovery algorithms – behave in a reactive fashion and thus are not prepared for the dynamics inherent to nodes mobility. Many emerging and upcoming IoT application scenarios are expected to impose real-time and reliable mobile data collection, which are not compatible with the long message latency, high packet loss and high overhead exhibited by the native RPL/6loWPAN protocols. To solve this problem, we integrate a proactive hand-off mechanism (dubbed smart-HOP) within RPL, which is very simple, effective and backward compatible with the standard protocol. We show that this add-on halves the packet loss and reduces the hand-off delay dramatically to one tenth of a second, upon nodes’ mobility, with a sub-percent overhead. The smart-HOP algorithm has been implemented and integrated in the Contiki 6LoWPAN/RPL stack (source-code available on-line mrpl: smart-hop within rpl, 2014) and validated through extensive simulation and experimentation.

The relationship between knowledge acquisition on international assignments and career development: an exploratory study with portuguese repatriates

This paper explores the relationship between the expatriates’ knowledge acquisition (KA) and their career development after an international assignment (IA). The purpose of this paper is to examine the role of expatriates in KA and transfer within International Portuguese multinational corporations. Furthermore, with this empirical study we try to analyse how the knowledge that is acquired and transferred translates into a basis for career development after the IA. This phenomenon has a special relevance in the Portuguese context, because this country is known a growing process of globalization in recent years. Furthermore, (a) there are no empirical studies concerning knowledge transfer and career development of repatriates from Portuguese companies; (b) little is known about the repatriates’ contributions to their home company after IA. This paper is one of the first to focus specifically on the repatriates’ role in KA and transfer from the host company to their Portuguese home company. A qualitative research methodology is used, specifically through an exploratory case study approach, which examines how knowledge management (KM) acquisition or transferring during IA are important for the repatriates’ career development in the Portuguese home company. Data were collected through semi-structured interviews to 42 Portuguese international assignees and 18 organizational representatives from nine Portuguese companies. Preliminary results show that KA and transfer made by Portuguese expatriates contributes directly to their career development. Moreover, evidence reveals that not all repatriates were promoted after their IA; rather some repatriates were even demoted after their IA. Furthermore, the results obtained suggest that the type of knowledge which acquired or transferred plays a central role in the career development after repatriation. According to these results, the paper discusses the major theoretical and practical implications. Suggestions for future research are also presented.

Relatório de estágio em educação pré-escolar e ensino do 1º ciclo do ensino básico

O presente relatório de estágio de qualificação profissional surge como forma de explanar o trabalho desenvolvido ao longo da prática pedagógica, pois o período de estágio apresenta-se como uma oportunidade fulcral para o desenvolvimento e experimentação de métodos e estratégias que colocam, muitas vezes, em questão conceções e preconceitos inerentes ao processo de ensino-aprendizagem. Sendo que os estagiários necessitam de oportunidades que contribuam “para a construção da sua própria aprendizagem” (Portugal, 2012, p. 100). Este contém análises e reflexões das práticas desenvolvidas e opções tomadas durante o estágio, tendo por base uma metodologia de investigação-ação na medida em que o trabalho realizado direcionou-se para a necessidade de transformação social. Neste sentido fomentou-se o questionamento reflexivo para melhoramento das práticas. Este estágio foi realizado em díade e apoiado em estratégias como as narrativas colaborativas, as planificações semanais, a avaliação reguladora e a supervisão. O presente encontra-se dividido em duas componentes, uma mais teórica, à qual se convoca autores e documentos legais para fundamentar a componente seguinte que é mais prática, onde se analisa as práticas desenvolvidas ao longo do ano letivo.

Relatório de estágio em educação pré-escolar e ensino do 1º ciclo do ensino básico

O presente relatório de estágio de qualificação profissional para obtenção do grau de Mestre em Educação Pré-Escolar e Ensino do 1.º Ciclo do Ensino Básico pretende refletir o percurso realizado em dois momentos de estágio, um desenvolvido em contexto de educação pré-escolar, com um grupo de crianças entre o 4 e os 5 anos, e o outro no ensino do 1.º ciclo do ensino básico, com uma turma do 3.º ano de escolaridade. A opção metodológica recaiu sobre a investigação-ação, que implica uma atitude de reflexão constante, tendo em vista a melhoria da ação educativa e o desenvolvimento profissional da formanda. Esta metodologia é cíclica, integrando diferentes fases, como a observação, planificação, ação, reflexão e avaliação. De forma a apoiar esta metodologia foram utilizadas estratégias formativas, como o estágio em díade, os guiões de pré-observação, a grelha de observação do ambiente educativo, as narrativas colaborativas e individuais, as planificações, a supervisão institucional e a avaliação reguladora. O presente relatório encontra-se dividido em três capítulos, sendo o primeiro de enquadramento teórico e conceptual, no qual se convocam autores e documentos legais para fundamentar a componente prática, o segundo de caracterização da instituição e meio envolvente e o terceiro de apresentação e análise das práticas desenvolvidas em contexto de estágio, enfatizando o desenvolvimento das competências profissionais. Em suma, a realização dos estágios em contextos distintos permitiu um desenvolvimento pessoal e profissional, que deverá continuar a ser um enfoque através da formação contínua.

Frameworks e Bibliotecas Javascript

This report describes a study based on a research and evaluation of platforms (JavaScript frameworks and libraries carried out under the discipline of Tese/Dissertação/Estágio in the Master Degree Computer Science - area of expertise in Arquitecturas Sistemas e Redes, in Instituto Superior de Engenharia do Porto (ISEP). The JavaScript language is increasingly present in the development of software and particularly software for the web environment. For this reason there is a need to investigate the issue, as the platforms that are emerging in the market have a very low level of maturity compared to existing, it is crucial to identify the main differences so that we can save time, labor and other costs in research and experimentation developers. This project aims to inform a range of platforms and existing JavaScript libraries on the market. For further investigation, a study of use cases used at this point in the market was held. To assist the work were used qualitative research methods through the existing content of research related to the area, and quantitative research methods. It was thus conducted a survey sent via email to fifty regular users of the language, platforms, and JavaScript libraries, linking the functional and non-functional characteristics of the platforms and existing use cases in the market, in order to realize what is the use of these tools in his professional life. This study allowed developers to access information that will be compared and evaluated in order to achieve a more precise evaluation of the various analyzed platforms. It was also made an evaluation of adaptation of the various platforms to the various use cases.