Avaliação e substituição de produtos químicos no sector BOF da Swedwood Portugal

A crescente preocupação com aspectos ambientais tornou-se uma questão incontornável para as empresas. Assim, a legislação aplicável obriga a maior controlo de qualquer tipo de perigo que ponha em causa a saúde humana ou o ambiente. Deste modo, a Swedwood Portugal é obrigada a implementar algumas medidas de controlo dos produtos químicos. Assim, os objectivos deste estágio curricular fundamentamse em identificar, avaliar e substituir ou minimizar os impactos dos produtos químicos (PQ’s) que, de acordo com especificações REACH (Regulamento da Comissão Europeia, relativo a Registo, Avaliação, Autorização e restrição de substâncias Químicas) e da Swedwood Internacional não podem ser utilizados. Como tal, o trabalho descrito nesta dissertação foi dividido em várias etapas. A primeira etapa consistiu em identificar todos os PQ’s utilizados no sector Board On Frame (BOF) da Swedwood Portugal. Feito este inventário, foi então criada uma base de dados em formato Microsoft Office Access que permitiu compilar a informação mais relevante dos PQ’s, para uma consulta mais simples e expedita, substituindo a já existente e desactualizada base de dados de PQ’s em formato Microsoft Office Excel. No total foram inventariados 243 PQ’s. Contudo, não foi possível obter as Fichas de Segurança de todos e, por isso, apenas 185 foram registados na base de dados. Estes 185 PQ’s existentes no sector BOF da Swedwood Portugal, foram submetidos a uma avaliação das substâncias que os compõem de acordo com uma ferramenta informática criada pela Swedwood Internacional – Substitution Evaluation Key (SEK). Esta ferramenta usa três listas europeias de substâncias químicas que permitem a avaliação de produtos químicos indirectos: Substances of Very High Concern (SVHC) da Agência Europeia de Produtos Químicos (ECHA), Substitute It Now (SIN) da ChemSec (Organização sueca dedicada ao ambiente) e PRIO da Agência Sueca de Produtos Químicos (Kemi). As três listas incluem substâncias de carácter de tal forma perigoso que a sua utilização deve ser restringida ou até eliminada. Logo, os PQ’s indirectos que contenham substâncias presentes em, pelo menos, uma destas listas devem ser imediatamente substituídos por outros cuja avaliação seja positiva. Por outro lado, para produtos químicos directos, as restrições encontram-se numa especificação imposta pela IKEA, IOS-MAT-0066. Concluída a avaliação, foi então necessário encontrar alternativas viáveis aos PQ’s avaliados negativamente. Como tal, a primeira abordagem consistiu em contactar os fabricantes dos PQ’s a substituir de modo a que estes pudessem apresentar as suas próprias alternativas. Caso estes não apresentassem alternativas viáveis, então contactarse- iam novos fornecedores. Dos 185 PQ’s registados na base de dados e avaliados, 30 produtos químicos indirectos existentes nas fábricas não obedeciam aos critérios impostos pela SEK, estando os produtos químicos directos todos de acordo com as imposições da IOS-MAT-0066. Os 30 PQ’s indirectos do Sector BOF da Swedwood Portugal que incluem as substâncias químicas com carácter perigoso apresentam características Cancerígenas, Mutagénicas e tóxicas para a Reprodução (CMR), irritantes e/ou sensibilizantes e perigosas, a longo prazo, para o ambiente. Para estes PQ’s foram apresentadas alternativas viáveis no que concerne a impactos para a saúde ou para o ambiente e os respectivos custos associados (admitindo quantidades mínimas vendidas). Contudo, não foi possível em tempo útil testar estas alternativas no funcionamento da empresa de modo a avaliar a sua eficiência técnica.

Makespan computation for GPU threads running on a single streaming multiprocessor

Graphics processors were originally developed for rendering graphics but have recently evolved towards being an architecture for general-purpose computations. They are also expected to become important parts of embedded systems hardware -- not just for graphics. However, this necessitates the development of appropriate timing analysis techniques which would be required because techniques developed for CPU scheduling are not applicable. The reason is that we are not interested in how long it takes for any given GPU thread to complete, but rather how long it takes for all of them to complete. We therefore develop a simple method for finding an upper bound on the makespan of a group of GPU threads executing the same program and competing for the resources of a single streaming multiprocessor (whose architecture is based on NVIDIA Fermi, with some simplifying assunptions). We then build upon this method to formulate the derivation of the exact worst-case makespan (and corresponding schedule) as an optimization problem. Addressing the issue of tractability, we also present a technique for efficiently computing a safe estimate of the worstcase makespan with minimal pessimism, which may be used when finding an exact value would take too long.

An approach for reliability-based robust design optimisation of angle-ply composites

Variations of manufacturing process parameters and environmental aspects may affect the quality and performance of composite materials, which consequently affects their structural behaviour. Reliability-based design optimisation (RBDO) and robust design optimisation (RDO) searches for safe structural systems with minimal variability of response when subjected to uncertainties in material design parameters. An approach that simultaneously considers reliability and robustness is proposed in this paper. Depending on a given reliability index imposed on composite structures, a trade-off is established between the performance targets and robustness. Robustness is expressed in terms of the coefficient of variation of the constrained structural response weighted by its nominal value. The Pareto normed front is built and the nearest point to the origin is estimated as the best solution of the bi-objective optimisation problem.

Building adaptable, QoS-aware dependable embedded systems

Most of today’s embedded systems are required to work in dynamic environments, where the characteristics of the computational load cannot always be predicted in advance. Furthermore, resource needs are usually data dependent and vary over time. Resource constrained devices may need to cooperate with neighbour nodes in order to fulfil those requirements and handle stringent non-functional constraints. This paper describes a framework that facilitates the distribution of resource intensive services across a community of nodes, forming temporary coalitions for a cooperative QoSaware execution. The increasing need to tailor provided service to each application’s specific needs determines the dynamic selection of peers to form such a coalition. The system is able to react to load variations, degrading its performance in a controlled fashion if needed. Isolation between different services is achieved by guaranteeing a minimal service quality to accepted services and by an efficient overload control that considers the challenges and opportunities of dynamic distributed embedded systems.

Insignificant impact of prescribed fire on surface soil in a Pinus pinaster plantation, northern Portugal

Following a prescribed fire in a Pinus pinaster forest site located in the north-west Portugal, monitoring of any changes in selected soil characteristics and soil hydrology was undertaken to assess the effects of burning on the following: pH, electrical conductivity, water content, organic carbon and porosity. Thirty plots were established on a regular grid. At each sample plot before and after the fire, samples were collected (disturbed samples from depths of 0-1cm and 1-5cm; undisturbed core samples from 0-5cm). The results indicate that there was no measurable impact on the properties of the soil following this carefully conducted prescribed fire. The fire only affected the litter layer, as intended. Confirmation of this minimal impact on the soil was provided by regrowth of grasses and herbs already occurring two months after the fire. The implication is, therefore, that provided this wildfire-risk reduction strategy is carried out under existing strict guidelines, any impact on soil quality will be minimal.

Mathematical modeling and simulation of heat flow through pultrusion die assembly system for thermoset composites

Pultrusion is an industrial process used to produce glass fibers reinforced polymers profiles. These materials are worldwide used when performing characteristics, such as great electrical and magnetic insulation, high strength to weight ratio, corrosion and weather resistance, long service life and minimal maintenance are required. In this study, we present the results of the modelling and simulation of heat flow through a pultrusion die by means of Finite Element Analysis (FEA). The numerical simulation was calibrated based on temperature profiles computed from thermographic measurements carried out during pultrusion manufacturing process. Obtained results have shown a maximum deviation of 7%, which is considered to be acceptable for this type of analysis, and is below to the 10% value, previously specified as maximum deviation. © 2011, Advanced Engineering Solutions.

Effects of prescribed fire on surface soil in a Pinus pinaster plantation, northern Portugal

In order to decrease the risk of severe wildfire, prescribed fire has recently been adopted in Portugal and elsewhere in the Mediterranean as a major tool for reducing the fuel load instead of manual or mechanical removal of vegetation. There has been some research into its impact on soils in shrublands and grasslands, but to date little research has been conducted in forested areas in the region. As a result, the impact of prescribed fire on the physico-chemical soil characteristics of forest soils has been assumed to be minimal, but this has not been demonstrated. In this study, we present the results of a monitoring campaign of a detailed pre- and post-prescribed fire assessment of soil properties in a long-unburnt P. pinaster plantation, NW Portugal. The soil characteristics examined were pH, total porosity, bulk density, moisture content, organic matter content and litter/ash quantity. The results show that there was no significant impact on the measured soil properties, the only effect being confined to minor changes in the upper 1 cm of soil. We conclude that provided the fire is carried out according to strict guidelines in P. pinaster forest, a minimal impact on soil properties can be expected.

Gestão de stocks e armazém de matérias-primas

Relatório de Estágio apresentado ao Instituto Politécnico do Porto para obtenção do Grau de Mestre em Logística Orientadores do Instituto: Professor Doutor Luís Barreto e Mestre Jonas Lima Orientador da empresa: Engenheiro Vítor Carvalho

Reason Maintenance Systems: Tools for Foundations-based Belief Revision

Dynamic and distributed environments are hard to model since they suffer from unexpected changes, incomplete knowledge, and conflicting perspectives and, thus, call for appropriate knowledge representation and reasoning (KRR) systems. Such KRR systems must handle sets of dynamic beliefs, be sensitive to communicated and perceived changes in the environment and, consequently, may have to drop current beliefs in face of new findings or disregard any new data that conflicts with stronger convictions held by the system. Not only do they need to represent and reason with beliefs, but also they must perform belief revision to maintain the overall consistency of the knowledge base. One way of developing such systems is to use reason maintenance systems (RMS). In this paper we provide an overview of the most representative types of RMS, which are also known as truth maintenance systems (TMS), which are computational instances of the foundations-based theory of belief revision. An RMS module works together with a problem solver. The latter feeds the RMS with assumptions (core beliefs) and conclusions (derived beliefs), which are accompanied by their respective foundations. The role of the RMS module is to store the beliefs, associate with each belief (core or derived belief) the corresponding set of supporting foundations and maintain the consistency of the overall reasoning by keeping, for each represented belief, the current supporting justifications. Two major approaches are used to reason maintenance: single-and multiple-context reasoning systems. Although in the single-context systems, each belief is associated to the beliefs that directly generated it—the justification-based TMS (JTMS) or the logic-based TMS (LTMS), in the multiple context counterparts, each belief is associated with the minimal set of assumptions from which it can be inferred—the assumption-based TMS (ATMS) or the multiple belief reasoner (MBR).

Size matters when we talk about corporate social responsibility: the case of portuguese companies

Social responsibility arises as a measure of the corporate policy that goes beyond the production activity, thus covering also the social and environmental activities. This issue has been gaining importance over time. The number of companies that are implementing socially responsible actions has been growing steadily even though it is still centered on large and medium sized companies. Social responsibility is an accessible theme to any company of any size, once the social and environmental issues are resolved through concrete actions, but in the small and micro-sized companies there are factors that inhibit such actions. Some of these factors are: reduced investment capacity; minimal expectations of medium to long term returns; or even the short-term management focus that is aimed at survival. Such facts can be verified in the case of Portuguese companies, where out of the 41 companies certified by SA 8000 only 5 are micro-sized or small and even these are linked to large organizations.

The development of the N1 and N2 components in auditory oddball paradigms: a systematic review with narrative analysis and suggested normative values

Auditory event-related potentials (AERPs) are widely used in diverse fields of today’s neuroscience, concerning auditory processing, speech perception, language acquisition, neurodevelopment, attention and cognition in normal aging, gender, developmental, neurologic and psychiatric disorders. However, its transposition to clinical practice has remained minimal. Mainly due to scarce literature on normative data across age, wide spectrumof results, variety of auditory stimuli used and to different neuropsychological meanings of AERPs components between authors. One of the most prominent AERP components studied in last decades was N1, which reflects auditory detection and discrimination. Subsequently, N2 indicates attention allocation and phonological analysis. The simultaneous analysis of N1 and N2 elicited by feasible novelty experimental paradigms, such as auditory oddball, seems an objective method to assess central auditory processing. The aim of this systematic review was to bring forward normative values for auditory oddball N1 and N2 components across age. EBSCO, PubMed, Web of Knowledge and Google Scholarwere systematically searched for studies that elicited N1 and/or N2 by auditory oddball paradigm. A total of 2,764 papers were initially identified in the database, of which 19 resulted from hand search and additional references, between 1988 and 2013, last 25 years. A final total of 68 studiesmet the eligibility criteria with a total of 2,406 participants from control groups for N1 (age range 6.6–85 years; mean 34.42) and 1,507 for N2 (age range 9–85 years; mean 36.13). Polynomial regression analysis revealed thatN1latency decreases with aging at Fz and Cz,N1 amplitude at Cz decreases from childhood to adolescence and stabilizes after 30–40 years and at Fz the decrement finishes by 60 years and highly increases after this age. Regarding N2, latency did not covary with age but amplitude showed a significant decrement for both Cz and Fz. Results suggested reliable normative values for Cz and Fz electrode locations; however, changes in brain development and components topography over age should be considered in clinical practice.

A Eficácia do Programa Fifa 11+ na Prevenção de Lesões em Atletas de Futebol Sub18

Introdução: No futebol, as lesões são da mais fulcral importância pelo que a sua prevenção se revela de extrema pertinência. A FIFA criou o FIFA 11+, um programa de prevenção de lesões, que revelou resultados positivos em equipas jovens tanto femininas como masculinas. No entanto, em Portugal, os resultados da sua implementação são escassos, principalmente em camadas jovens. Objetivo: Estudar a eficácia do programa FIFA 11+ na prevenção de lesões em atletas de futebol – sub 18. Métodos: O presente estudo quasi experimental teve como amostra uma equipa de 24 atletas, divididos voluntariamente em 2 grupos: o grupo experimental (GE) (n=12), e o grupo controlo (GC) (n= 12). Ambos os grupos realizaram os treinos normais sendo o grupo experimental sujeito adicionalmente ao programa FIFA 11+ duas vezes por semana, durante 12 semanas. Foi utilizado ainda o Orchard Sports Injury Classification System (OSICS-10) como sistema de classificação de lesões, sendo estas divididas em graves, moderadas, leves e mínimas. O teste Mann-Whitney foi utilizado para a comparação entre grupos, e o teste de Wilcoxon para a comparação intra grupo. Resultados: Quando comparados o GE com o GC em M0 não se observaram diferenças estatisticamente significativas (p=0.065), no número de lesões entre os grupos. O mesmo se verificou após a implementação do programa FIFA 11+ (p=1,000). Na comparação intra-grupo de M0 e M1 o grupo controlo não apresentou diferenças estatisticamente significativas (p=0,317) enquanto que no grupo experimental se observou que existiam significativamente menos lesões após a implementação do programa. (p=0,025). Conclusão: O programa FIFA 11+ parece ser indicado para a prevenção e diminuição de lesões desportivas em jogadores amadores de equipas sub-18, quando aplicado duas vezes por semana. Apesar disso, para eleger o programa como uma ferramenta de eleição na promoção da saúde, mais estudos são sugeridos utilizando uma amostra maior e se possível num período superior.

Deteção e previsão de falhas em equipamentos de produção industrial

As empresas nacionais deparam-se com a necessidade de responder ao mercado com uma grande variedade de produtos, pequenas séries e prazos de entrega reduzidos. A competitividade das empresas num mercado global depende assim da sua eficiência, da sua flexibilidade, da qualidade dos seus produtos e de custos reduzidos. Para se atingirem estes objetivos é necessário desenvolverem-se estratégias e planos de ação que envolvem os equipamentos produtivos, incluindo: a criação de novos equipamentos complexos e mais fiáveis, alteração dos equipamentos existentes modernizando-os de forma a responderem às necessidades atuais e a aumentar a sua disponibilidade e produtividade; e implementação de políticas de manutenção mais assertiva e focada no objetivo de “zero avarias”, como é o caso da manutenção preditiva. Neste contexto, o objetivo principal deste trabalho consiste na previsão do instante temporal ótimo da manutenção de um equipamento industrial – um refinador da fábrica de Mangualde da empresa Sonae Industria, que se encontra em funcionamento contínuo 24 horas por dia, 365 dias por ano. Para o efeito são utilizadas medidas de sensores que monitorizam continuamente o estado do refinador. A principal operação de manutenção deste equipamento é a substituição de dois discos metálicos do seu principal componente – o desfibrador. Consequentemente, o sensor do refinador analisado com maior detalhe é o sensor que mede a distância entre os dois discos do desfibrador. Os modelos ARIMA consistem numa abordagem estatística avançada para previsão de séries temporais. Baseados na descrição da autocorrelação dos dados, estes modelos descrevem uma série temporal como função dos seus valores passados. Neste trabalho, a metodologia ARIMA é utilizada para determinar um modelo que efetua uma previsão dos valores futuros do sensor que mede a distância entre os dois discos do desfibrador, determinando-se assim o momento ótimo da sua substituição e evitando paragens forçadas de produção por ocorrência de uma falha por desgaste dos discos. Os resultados obtidos neste trabalho constituem uma contribuição científica importante para a área da manutenção preditiva e deteção de falhas em equipamentos industriais.

Arc exchange systems and renormalization

We exhibit the construction of stable arc exchange systems from the stable laminations of hyperbolic diffeomorphisms. We prove a one-to-one correspondence between (i) Lipshitz conjugacy classes of C(1+H) stable arc exchange systems that are C(1+H) fixed points of renormalization and (ii) Lipshitz conjugacy classes of C(1+H) diffeomorphisms f with hyperbolic basic sets Lambda that admit an invariant measure absolutely continuous with respect to the Hausdorff measure on Lambda. Let HD(s)(Lambda) and HD(u)(Lambda) be, respectively, the Hausdorff dimension of the stable and unstable leaves intersected with the hyperbolic basic set L. If HD(u)(Lambda) = 1, then the Lipschitz conjugacy is, in fact, a C(1+H) conjugacy in (i) and (ii). We prove that if the stable arc exchange system is a C(1+HDs+alpha) fixed point of renormalization with bounded geometry, then the stable arc exchange system is smooth conjugate to an affine stable arc exchange system.

Two new power indices based on winning coalitions

Deegan and Packel (1979) and Holler (1982) proposed two power indices for simple games: the Deegan–Packel index and the Public Good Index. In the definition of these indices, only minimal winning coalitions are taken into account. Using similar arguments, we define two new power indices. These new indices are defined taking into account only those winning coalitions that do not contain null players. The results obtained with the different power indices are compared by means of two real-world examples taken from the political field.