Aumentar as oportunidades de comunicação nos momentos de brincadeira - descrição de um programa de intervenção

Objetivo: Partindo da análise da literatura realizada, em que é salientada a ideia de que o desenvolvimento e aprendizagem ocorrem a partir das experiências e influência dos contextos em que as crianças estão incluídas e a partir das interações que estabelecem nesses mesmos contextos, pretende-se compreender, neste estudo, se partindo do contexto natural, com diferentes materiais e atores, é possível aumentar as oportunidades de comunicação e participação de uma criança com restrições ao nível da linguagem, nos momentos de jogo. Método: Foi delineado e implementado um programa de intervenção, num estabelecimento de ensino, na valência de pré-escolar, onde estiveram envolvidas uma criança de 4 anos com restrições ao nível da linguagem oral, o grupo de crianças em que estava incluída e a educadora do grupo. Para monitorização do programa e avaliação da sua eficácia realizou-se um pré e pós teste, onde foi definida a linha de base da criança. Ao longo do programa foram registados, a partir de uma grelha de observação da frequência dos atos comunicativos da criança, nas situações de jogo planificadas. Os comportamentos e modelagem realizada por parte educador, foram igualmente registados e analisados. Recorreu-se a realização de entrevistas semiestruturadas para a recolha de dados relativos à criança e perceção do educador. Resultados/Discussão: Os dados recolhidos demonstram um aumento significativo das tomadas de iniciativa verbal e alternância entre turnos, ao longo da intervenção por parte da criança alvo. A presença do adulto e dos pares parecem revelar-se como facilitador dos atos comunicativos da criança com restrições ao nível da linguagem

Radar Based Collision detection developments on USV ROAZ II

This work presents the integration of obstacle detection and analysis capabilities in a coherent and advanced C&C framework allowing mixed-mode control in unmanned surface systems. The collision avoidance work has been successfully integrated in an operational autonomous surface vehicle and demonstrated in real operational conditions. We present the collision avoidance system, the ROAZ autonomous surface vehicle and the results obtained at sea tests. Limitations of current COTS radar systems are also discussed and further research directions are proposed towards the development and integration of advanced collision avoidance systems taking in account the different requirements in unmanned surface vehicles.

ROAZ Autonomous Surface Vehicle Design and Implementation

The design of an Autonomous Surface Vehicle for operation in river and estuarine scenarios is presented. Multiple operations with autonomous underwater vehicles and support to AUV missions are one of the main design goals in the ROAZ system. The mechanical design issues are discussed. Hardware, software and implementation status are described along with the control and navigation system architecture. Some preliminary test results concerning a custom developed thruster are presented along with hydrodynamic drag calculations by the use of computer fluid dynamic methods.

Swordfish: an Autonomous Surface Vehicle for Network Centric Operations

The design and development of the swordfish autonomous surface vehicle (ASV) system is discussed. Swordfish is an ocean capable 4.5 m long catamaran designed for network centric operations (with ocean and air going vehicles and human operators). In the basic configuration, Swordfish is both a survey vehicle and a communications node with gateways for broadband, Wi-Fi and GSM transports and underwater acoustic modems. In another configuration, Swordfish mounts a docking station for the autonomous underwater vehicle Isurus from Porto University. Swordfish has an advanced control architecture for multi-vehicle operations with mixed initiative interactions (human operators are allowed to interact with the control loops).

AUV Control and Communication using Underwater Acoustic Networks

Underwater acoustic networks can be quite effective to establish communication links between autonomous underwater vehicles (AUVs) and other vehicles or control units, enabling complex vehicle applications and control scenarios. A communications and control framework to support the use of underwater acoustic networks and sample application scenarios are described for single and multi-AUV operation.

Autonomous Surface Vehicle Docking Manoeuvre with Visual Information

This work presents a hybrid coordinated manoeuvre for docking an autonomous surface vehicle with an autonomous underwater vehicle. The control manoeuvre uses visual information to estimate the AUV relative position and attitude in relation to the ASV and steers the ASV in order to dock with the AUV. The AUV is assumed to be at surface with only a small fraction of its volume visible. The system implemented in the autonomous surface vehicle ROAZ, developed by LSA-ISEP to perform missions in river environment, test autonomous AUV docking capabilities and multiple AUV/ASV coordinated missions is presented. Information from a low cost embedded robotics vision system (LSAVision), along with inertial navigation sensors is fused in an extended Kalman filter and used to determine AUV relative position and orientation to the surface vehicle The real time vision processing system is described and results are presented in operational scenario.

Marine Operations with the SWORDFISH Autonomous Surface Vehicle

IEEE Robótica 2007 - 7th Conference on Mobile Robots and Competitions, Paderne, Portugal 2007

Hybrid Maneuver for Gradient Search with Multiple Coordinated AUVs

This work presents a hybrid maneuver for gradient search with multiple AUV's. The mission consists in following a gradient field in order to locate the source of a hydrothermal vent or underwater freshwater source. The formation gradient search exploits the environment structuring by the phenomena to be studied. The ingredients for coordination are the payload data collected by each vehicle and their knowledge of the behaviour of other vehicles and detected formation distortions.

Dificuldades de prendizagem na quisição da leitura: um estudo de caso

A aprendizagem da leitura e da escrita consiste num dos maiores desafios que as crianças têm de enfrentar no início da sua escolarização. Conseguir vencer esse desafio dá-lhes a oportunidade de se tornarem cidadãos livres, autónomos e informados (Silva, 2003). Contudo, o ato de ler pode tornar-se um desafio árduo de atingir, com muitas dificuldades pelo meio, podendo exigir bastante sensibilidade, conhecimento, informação e até arte por parte de quem ensina. Sabemos que a informação não chega a todos os alunos da mesma forma. Uns necessitam de mais tempo para aprender, mais oportunidades, outras estratégias. Este trabalho teve como objetivo principal encontrar um conjunto de estratégias que fossem ao encontro das necessidades educativas de uma aluna com oito anos de idade que revela grandes dificuldades na aquisição desta competência. Numa primeira fase da intervenção foram aplicadas provas diagnósticas para aferir as aquisições que a aluna já tinha feito de modo a delinear uma intervenção eficaz e motivadora que fosse ao encontro das suas necessidades. A intervenção baseou-se na aplicação de um método multissensorial que trabalhasse todos os mecanismos inerentes ao ato de ler. Esperava-se que com esta intervenção a aluna lesse e escrevesse pequenas frases, tendo adquirido a base para o desenvolvimento da leitura. Os resultados obtidos foram positivos, sendo que os fonemas trabalhados foram adquiridos, tendo chegado a aluna ao fim da intervenção a ler frases simples

Standard commercial education robotic platform: intermediate solution to teaching robotics

Teaching robotics to students at the beginning of their studies has become a huge challenge. Simulation environments can be an effective solution to that challenge where students can interact with simulated robots and have the first contact with robotic constraints. From our previous experience with simulation environments it was possible to observe that students with lower background knowledge in robotics where able to deal with a limited number of constraints, implement a simulated robotic platform and study several sensors. The question is: after this first phase what should be the best approach? Should the student start developing their own hardware? Hardware development is a very important part of an engineer's education but it can also be a difficult phase that could lead to discouragement and loss of motivation in some students. Considering the previous constraints and first year engineering students’ high abandonment rate it is important to develop teaching strategies to deal with this problem in a feasible way. The solution that we propose is the integration of a low-cost standard robotic platform WowWee Rovio as an intermediate solution between the simulation phase and the stage where the students can develop their own robots. This approach will allow the students to keep working in robotic areas such as: cooperative behaviour, perception, navigation and data fusion. The propose approach proved to be a motivation step not only for the students but also for the teachers. Students and teachers were able to reach an agreement between the level of demand imposed by the teachers and satisfaction/motivation of the students.

Analysis of Two Arms Working in Cooperation

This paper analyzes the performance of two cooperative robot manipulators. In order to capture the working performancewe formulated several performance indices that measure the manipulability, the effort reduction and the equilibrium between the two robots. In this perspective the proposed indices we determined the optimal values for the system parameters. Furthermore, it is studied the implementation of fractional-order algorithms in the position/force control of two cooperative robotic manipulators holding an object.

Cascade Control of a Hexapod Robot

6th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, Catania, Italy, 17-19 September

Kinematic Manipulability of Robotic Systems

Many tasks involving manipulation require cooperation between robots. Meanwhile, it is necessary to determine the adequate values for the robot parameters to obtain a good performence. This paper discusses several aspects related with the manipulability of two co-operative robots when handling objects with different lengths and orientations. In this line of thought, a numerical tool is developed for the calculation and the graphical visualization of the manipulability measure.

Energy analysis of Multi-legged Locomotion Systems

4th International Conference on Climbing and Walking Robots - From Biology to Industrial Applications

Decentralized Target Tracking based on Multi-Robot Cooperative Triangulation

Target tracking with bearing-only sensors is a challenging problem when the target moves dynamically in complex scenarios. Besides the partial observability of such sensors, they have limited field of views, occlusions can occur, etc. In those cases, cooperative approaches with multiple tracking robots are interesting, but the different sources of uncertain information need to be considered appropriately in order to achieve better estimates. Even though there exist probabilistic filters that can estimate the position of a target dealing with incertainties, bearing-only measurements bring usually additional problems with initialization and data association. In this paper, we propose a multi-robot triangulation method with a dynamic baseline that can triangulate bearing-only measurements in a probabilistic manner to produce 3D observations. This method is combined with a decentralized stochastic filter and used to tackle those initialization and data association issues. The approach is validated with simulations and field experiments where a team of aerial and ground robots with cameras track a dynamic target.