Image quality and dose analysis in PA chest x-ray: comparison between AEC and manual mode acquisition using the 10 kVp rule

Purpose: To compare image quality and effective dose when the 10 kVp rule is applied with manual and AEC mode in PA chest X-ray. Methods and Materials: A total of 68 images (with and without lesions) were acquired of an anthropomorphic chest phantom in a Wolverson Arcoma X-ray unit. The images were evaluated against a reference image using image quality criteria and the 2 alternative forced choice (2 AFC) method by five radiographers. The effective dose was calculated using PCXMC software using the exposure parameters and DAP. The exposure index (lgM) was recorded. Results: Exposure time decreases considerably when applying the 10 kVp rule in manual mode (50%-28%) compared to AEC mode (36%-23%). Statistical differences for effective dose between several AEC modes were found (p=0.002). The effective dose is lower when using only the right AEC ionization chamber. Considering image quality, there are no statistical differences (p=0.348) between the different AEC modes for images with no lesions. Using a higher kVp value the lgM values will also increase. The lgM values showed significant statistical differences (p=0.000). The image quality scores did not present statistically significant differences (p=0.043) for the images with lesions when comparing manual with AEC modes. Conclusion: In general, the dose is lower in the manual mode. By using the right AEC ionising chamber the effective dose will be the lowest in comparison to other ionising chambers. The use of the 10 kVp rule did not affect the detectability of the lesions.

Aspectos a considerar para a avaliação de riscos no caso da aplicação do óleo descofrante

Mestrado em Higiene e Segurança no Trabalho.

Modeling for control design of a multi-reach water canal

This article addresses the problem of obtaining reduced complexity models of multi-reach water delivery canals that are suitable for robust and linear parameter varying (LPV) control design. In the first stage, by applying a method known from the literature, a finite dimensional rational transfer function of a priori defined order is obtained for each canal reach by linearizing the Saint-Venant equations. Then, by using block diagrams algebra, these different models are combined with linearized gate models in order to obtain the overall canal model. In what concerns the control design objectives, this approach has the advantages of providing a model with prescribed order and to quantify the high frequency uncertainty due to model approximation. A case study with a 3-reach canal is presented, and the resulting model is compared with experimental data. © 2014 IEEE.

Determination of airborne nanoparticles in elderly care centres

According to numerous studies, airborne nanoparticles have a potential to produce serious adverse human health effects when deposited into the respiratory tract. The most important parts of the lung are the alveolar regions with their enormous surface areas and potential to transfer nanoparticles into the blood stream. These effects may be potentiated in case of the elderly, since this population is more susceptible to air pollutants in general and more to nanoparticles than larger particles. The main goal of this investigation was to determine the exposure of institutionalized elders to nanoparticles using Nanoparticle Surface Area Monitor (NSAM) equipment to calculate the deposited surface area (DSA) of nanoparticles into elderly lungs. In total, 193 institutionalized individuals over 65 yr of age were examined in four elderly care centers (ECC). The occupancy daily pattern was achieved by applying a questionnaire, and it was concluded that these subjects spent most of their time indoors, including the bedroom and living room, the indoor microenvironments with higher prevalence of elderly occupancy. The deposited surface area ranged from 10 to 46 mu m(2)/cm(3). The living rooms presented significantly higher levels compared with bedrooms. Comparing PM10 concentrations with nanoparticles deposited surface area in elderly lungs, it is conceivable that living rooms presented the highest concentration of PM10 and were similar to the highest average DSA. The temporal distribution of DSA was also assessed. While data showed a quantitative fluctuation in values in bedrooms, high peaks were detected in living rooms.

Consumo de benzodiazepinas por idosos institucionalizados: inapropriação, qualidade de sono e contributo para a segurança na medicação

A racionalização do uso de medicamentos constitui-se como um fator contribuinte para a melhoria da segurança do doente, particularmente no que respeita à segurança na medicação, tendo-se tornado prioritária para as organizações e instituições de saúde. A avaliação do uso de medicamentos inapropriados no idoso constitui-se como uma medida que concorre para evitar, prevenir ou corrigir eventos adversos associados ao seu uso. As benzodiazepinas são uma das classes de medicamentos mais prescritas em idosos. No entanto, e apesar de sua utilidade clínica, algumas benzodiazepinas são consideradas inapropriadas nesta faixa etária por potenciarem o efeito sedativo e aumentar a incidência de quedas e fraturas. A longo prazo, na promoção da qualidade do sono, a sua efetividade é discutível já que a toma de uma benzodiazepina para a resolução de um problema como o sono, muitas vezes pontual, passa a ser um problema crónico de exigência de toma contínua, sem que a qualidade deste seja restabelecida, pondo em risco a segurança do doente. Este estudo tem como objetivo caracterizar o consumo de benzodiazepinas por idosos institucionalizados, numa instituição de longa permanência do concelho de Sesimbra, sua inapropriação e a relação com a qualidade de sono. Foi desenvolvido um estudo descritivo e transversal, assente no paradigma qualitativo, com a recolha de dados a decorrer em três momentos: registo de informação em grelha própria da caracterização sociodemográfica e da caracterização do consumo de benzodiazepinas; aplicação do índice de Katz para determinar a funcionalidade dos participantes; aplicação do questionário adaptado do Pittsburgh Sleep Quality Index para avaliação da qualidade do sono. A inapropriação foi avaliada pela aplicação dos critérios de Beers. Após aplicação dos critérios de inclusão (idade superior a 65 anos e capacidade funcional) aos 97 utentes da instituição, a amostra foi constituída por 51 utentes. Foi recolhido consentimento informado de todos os participantes. Os resultados obtidos mostram que 46% das benzodiazepinas consumidas são de duração intermédia de ação, observando-se ainda um valor considerável de consumo de benzodiazepinas de longa duração de ação (36%). Estes valores correspondem a um grau elevado de inapropriação, potenciando os riscos para a segurança do doente nesta faixa etária. O lorazepam 2,5mg é a benzodiazepina mais utilizada como hipnótico. Mas, apesar do consumo deste grupo de medicamentos 81,6% dos idosos que consumem benzodiazepinas não apresentam boa qualidade de sono (PSQI>5), enquanto 77% dos idosos que não consomem benzodiazepinas apresentam boa qualidade de sono (PSQI≤5). Nos idosos que consomem benzodiazepinas, a média de tempo despendido na cama até adormecer foi de cerca de 55 minutos, valor superior ao grupo que não consome benzodiazepinas, onde a média é de 27 minutos. Neste grupo de idosos, o consumo de benzodiazepinas não só é inapropriado como não contribuiu para uma melhoria na qualidade de sono nem para a segurança do doente, como são os consumidores de benzodiazepinas que apresentam uma pior qualidade de sono, nas suas várias dimensões.

Optimisation of paediatrics computed radiography for full spine curvature measurements using a phantom: a pilot study

Aim: Optimise a set of exposure factors, with the lowest effective dose, to delineate spinal curvature with the modified Cobb method in a full spine using computed radiography (CR) for a 5-year-old paediatric anthropomorphic phantom. Methods: Images were acquired by varying a set of parameters: positions (antero-posterior (AP), posteroanterior (PA) and lateral), kilo-voltage peak (kVp) (66-90), source-to-image distance (SID) (150 to 200cm), broad focus and the use of a grid (grid in/out) to analyse the impact on E and image quality (IQ). IQ was analysed applying two approaches: objective [contrast-to-noise-ratio/(CNR] and perceptual, using 5 observers. Monte-Carlo modelling was used for dose estimation. Cohen’s Kappa coefficient was used to calculate inter-observer-variability. The angle was measured using Cobb’s method on lateral projections under different imaging conditions. Results: PA promoted the lowest effective dose (0.013 mSv) compared to AP (0.048 mSv) and lateral (0.025 mSv). The exposure parameters that allowed lower dose were 200cm SID, 90 kVp, broad focus and grid out for paediatrics using an Agfa CR system. Thirty-seven images were assessed for IQ and thirty-two were classified adequate. Cobb angle measurements varied between 16°±2.9 and 19.9°±0.9. Conclusion: Cobb angle measurements can be performed using the lowest dose with a low contrast-tonoise ratio. The variation on measurements for this was ±2.9° and this is within the range of acceptable clinical error without impact on clinical diagnosis. Further work is recommended on improvement to the sample size and a more robust perceptual IQ assessment protocol for observers.

Evaluation of the influence of testing parameters on the melt flow index of thermoplastics

The main goals of the present work are the evaluation of the influence of several variables and test parameters on the melt flow index (MFI) of thermoplastics, and the determination of the uncertainty associated with the measurements. To evaluate the influence of test parameters on the measurement of MFI the design of experiments (DOE) approach has been used. The uncertainty has been calculated using a "bottom-up" approach given in the "Guide to the Expression of the Uncertainty of Measurement" (GUM). Since an analytical expression relating the output response (MFI) with input parameters does not exist, it has been necessary to build mathematical models by adjusting the experimental observations of the response variable in accordance with each input parameter. Subsequently, the determination of the uncertainty associated with the measurement of MFI has been performed by applying the law of propagation of uncertainty to the values of uncertainty of the input parameters. Finally, the activation energy (Ea) of the melt flow at around 200 degrees C and the respective uncertainty have also been determined.

Como incluir as crianças na avaliação diária

Relatório da Prática Profissional Supervisionada Mestrado em Educação Pré-Escolar

A perceção da articulação entre sistemas do corpo humano em alunos do 3.º ano de escolaridade

Relatório de Estágio apresentado à Escola Superior de Educação de Lisboa para obtenção de grau de mestre em Ensino do 1.º e 2.º Ciclo do Ensino Básico

Integrated didactics: an example of a curriculum model enhancing knowledge crossing

In this paper, we introduce an innovative course in the Portuguese Context, the Master's Course in “Integrated Didactics in Mother Tongue, Maths, Natural and Social Sciences”, taking place at the Lisbon School of Education and discussing in particular the results of the evaluation made by the students who attended the Curricular Unit - Integrated Didactics (CU-ID). This course was designed for in-service teachers of the first six years of schooling and intends to improve connections between different curriculum areas. In this paper, we start to present a few general ideas about curriculum development; to discuss the concept of integration; to present the principles and objectives of the course created as well as its structure; to describe the methodology used in the evaluation process of the above mentioned CU-ID. The results allow us to state that the students recognized, as positive features of the CU-ID, the presence in all sessions of two teachers simultaneously from different scientific areas, as well as invitations issued to specialists on the subject of integration and to other teachers that already promote forms of integration in schools. As negative features, students noted a lack of integrated purpose, applying simultaneously the four scientific areas of the course, and also indicated the need to be familiar with more models of integrated education. Consequently, the suggestions for improvement derived from these negative features. The students also considered that their evaluation process was correct, due to the fact that it was focused on the design of an integrated project for one of the school years already mentioned.

El conservadurismo, el secreto y las opciones de financiación de las pyme portuguesas

Doutoramento em Economia Financeira e Contabilidade

Gestão integrada de ativos num contexto real

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de Manutenção

Desenvolver o conhecimento sintático explícito no 1.º ciclo do ensino básico

Dissertação apresentada à Escola Superior de Educação de Lisboa para obtenção de grau de mestre em Didática da Língua Portuguesa

A importância do planeamento e orçamentação nas empreitadas de obras de instalações mecânicas

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

Aplicação da filosofia Lean management:caso de estudo, aplicado à manutenção de edifícios

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia da Manutenção