Influence of the use of recycled concrete aggregates from different sources on structural concrete

This paper intends to evaluate the capacity of producing concrete with a pre-established performance (in terms of mechanical strength) incorporating recycled concrete aggregates (RCA) from different sources. To this purpose, rejected products from the precasting industry and concrete produced in laboratory were used. The appraisal of the self-replication capacity was made for three strength ranges: 15-25 MPa, 35-45 MPa and 65-75 MPa. The mixes produced tried to replicate the strength of the source concrete (SC) of the RA. Only total, (100%) replacement of coarse natural aggregates (CNA) by coarse recycled concrete aggregates (CRCA) was tested. The results show that, both in mechanical and durability terms, there were no significant differences between aggregates from controlled sources and those from precast rejects for the highest levels of the target strength. Furthermore, the performance losses resulting from the RA's incorporation are substantially reduced when used medium or high strength SC's. (C) 2014 Elsevier Ltd. All rights reserved.

Marx-Type solid-state bipolar modulator topologies: Performance comparison

The operation of generalized Marx-type solid-state bipolar modulators is discussed and compared with simplified Marx-derived circuits, to evaluate their capability to deal with various load conditions. A comparative analysis on the number of switches per cell, fiber optic trigger count, losses, and switch hold-off voltages has been made. A circuit topology is obtained as a compromise in terms of operating performance, trigger simplicity, and switching losses. A five-stage laboratory prototype of this circuit has been assembled using 1200 V insulated gate bipolar transistors (IGBTs) and diodes, operating with 1000 V dc input voltage and 1 kHz frequency, giving 5 kV bipolar pulses, with 2.5 mu s pulse width and 5 mu s relaxation time into resistive, capacitive, and inductive loads.

Melhoria da qualidade do produto numa empresa de produção por lotes

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

Auditorias de energia em instalações industriais do setor automóvel

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

A farmacogenética e a medicina personalizada

A farmacogenética tem por objetivo a identificação de diferenças genéticas entre indivíduos que possam influenciar a resposta à terapêutica farmacológica, melhorando a sua eficácia e segurança. Associado à farmacogenética surge a “medicina personalizada”, ou seja, em oposição à existência de um fármaco que consiga tratar todos os pacientes, o tratamento individualizado parece o caminho mais promissor, uma vez que reduz o risco de reações adversas por toxicidade (segurança), adequa a dose ao indivíduo, evitando excessos ou défices (dose) e evita a metodologia de tentativa erro na escolha do fármaco (eficácia). A farmacogenética é relevante para a resposta individual ao fármaco por duas vias distintas: a farmacocinética e a farmacodinâmica. A variabilidade genética pode afetar a forma como um fármaco pode ser absorvido, ativado, metabolizado ou excretado, podendo conduzir assim a uma variabilidade na resposta. De entre o número infindável de possíveis exemplos, nesta revisão apresentam-se exemplos relacionados com os genes do Citocromo P450, do gene NAT2 e do gene da Colinesterase. As diferenças genéticas entre os indivíduos podem ainda afetar a resposta ao fármaco pela sua farmacodinâmica, ou seja, a resposta específica do alvo ao fármaco. De entre a multiplicidade de alvos de fármacos existentes serão apresentados exemplos do gene da G6PD e do VKORC1. Apesar de alguns dados científicos indicarem benefício para o paciente, ainda está longe de a farmacogenética fazer parte da prática clínica de rotina, talvez porque os custos-benefícios ainda não foram avaliados de forma precisa.

Toroid inductor development for a SIC DC-DC converter up to 150kW, based on finite element method

Dissertação para a obtenção do grau de Mestre em Engenharia Electrotécnica Ramo de Energia

InfoAPP: um novo agregador de conteúdos informativos

Trabalho de projeto apresentado à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Publicidade e Marketing.

PV systems linked to the grid: parameter identification with a heuristic procedure

This paper focuses on a PV system linked to the electric grid by power electronic converters, identification of the five parameters modeling for photovoltaic systems and the assessment of the shading effect. Normally, the technical information for photovoltaic panels is too restricted to identify the five parameters. An undemanding heuristic method is used to find the five parameters for photovoltaic systems, requiring only the open circuit, maximum power, and short circuit data. The I- V and the P- V curves for a monocrystalline, polycrystalline and amorphous photovoltaic systems are computed from the parameters identification and validated by comparison with experimental ones. Also, the I- V and the P- V curves under the effect of partial shading are obtained from those parameters. The modeling for the converters emulates the association of a DC-DC boost with a two-level power inverter in order to follow the performance of a testing commercial inverter employed on an experimental system. © 2015 Elsevier Ltd.

Non-uniform printed antenna array for wireless communications in sports arenas

Wireless communications had a great development in the last years and nowadays they are present everywhere, public and private, being increasingly used for different applications. Their application in the business of sports events as a means to improve the experience of the fans at the games is becoming essential, such as sharing messages and multimedia material on social networks. In the stadiums, given the high density of people, the wireless networks require very large data capacity. Hence radio coverage employing many small sized sectors is unavoidable. In this paper, an antenna is designed to operate in the Wi-Fi 5GHz frequency band, with a directive radiation pattern suitable to this kind of applications. Furthermore, despite the large bandwidth and low losses, this antenna has been developed using low cost, off-the-shelf materials without sacrificing quality or performance, essential to mass production. © 2015 EurAAP.

Lean management: aplicação a uma pequena empresa de construção civil

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil Especialização em Edificações