The use of a gold disc microelectrode for the determination of copper in human sweat

A novel approach of using a gold disc microelectrode to analyze sweat samples for copper ions by anodic square wave stripping voltammetry (SW stripping voltammetry) is described Sweat was collected from the lower back of four subjects after physical exercise and the sample volume required for the determinations was 100 mu L. Under the optimized conditions the calibration plot was linear over the range 1-100 mu mol L(-1) Cu(II) with a limit of detection of 0 25 mu mol L(-1) The precision was evaluated by carrying out five replicate measurements in a 1 mu mol L(-1) Cu(II) solution and the standard deviation was found to be 1 5% Measurements were performed by inserting the microelectrode into sweat drops and Cu(II) concentrations in the analyzed samples ranged from 09 to 28 mu mol L(-1) Values obtained by the proposed voltammetric method agreed well with those found using graphite furnace atomic absorption spectroscopy (GFAAS) (C) 2010 Elsevier B V All rights reserved

Thermal studies on polymorphic structures of tibolone

Tibolone polymorphic forms I (monoclinic) and II (triclinic) have been prepared by recrystallization from acetone and toluene, respectively, and characterized by different techniques sensitive to changes in solid state, such as polarized light microscopy, X-ray powder diffractometry, thermal analysis (TG/DTG/DSC), and vibrational spectroscopy (FTIR and Raman microscopy). The nonisothermal decomposition kinetics of the obtained polymorphs were studied using thermogravimetry. The activation energies were calculated through the Ozawa`s method for the first step of decomposition, the triclinic form showed a lower E (a) (91 kJ mol(-1)) than the monoclinic one (95 kJ mol(-1)). Furthermore, Raman microscopy and DSC at low heating rates were used to identify and follow the thermal decomposition of the triclinic form, showing the existence of three thermal events before the first mass loss.

Chemical Composition and Antimicrobial Activity of the Essential Oil from Rollinia sericea (REFr.) REFr. (Annonaceae) Leaves

The chemical composition of the essential oil of Rollinia sericea (R.E.Fr.) R.E.Fr. leaves was determined by GC and GC/MS analysis. The analysis revealed the presence mainly of sesquiterpenes: beta-elemene (10%), beta-caryophyllene (10.0%), bicyclogermacrene (9.1%), germacrene-D (8.2%), bicycloelemene (6.2%) and (Z)-nerolidol (5.3%). Rollinia sericea oil was able to inhibit the growth of both fungi Aspergillus niger (16404) and Candida albicans (ATCC 10231) as well as the Gram-positive bacterium Staphyloccocus aureus (ATCC 6538) but it was inactive against the Gram-negative bacteria Escherichia coli (ATCC 8739) and Pseudomonas aeruginosa (ATCC 9027).

Excited Electronic States, Transition Probabilities, and Radiative Lifetimes of CAs: A Theoretical Contribution and Challenge to Experimentalists

High-level CASSCF/MRCI calculations with a quintuple-zeta quality basis set are reported by characterizing for the first time a manifold of electronic states of the CAs radical yet to be investigated experimentally. Along with the potential energy curves and the associated spectroscopic constants, the dipole moment functions for selected electronic states as well as the transition dipole moment functions for the most relevant electronic transitions are also presented. Estimates of radiative transition probabilities and lifetimes complement this investigation, which also assesses the effect of spin-orbit interaction on the A (2)Pi state. Whenever pertinent, comparisons of similarities and differences with the isovalent CN and CP radicals are made.

Approaches for multicopper oxidases in the design of electrochemical sensors for analytical applications

We report an effective approach for the construction of a biomimetic sensor of multicopper oxidases by immobilizing a cyclic-tetrameric copper(II) species, containing the ligand (4-imidazolyl)ethylene-2-amino-1-ethylpyridine (apyhist), in the Nafion (R) membrane on a vitreous carbon electrode surface. This complex provides a tetranuclear arrangement of copper ions that allows an effective reduction of oxygen to water, in a catalytic cycle involving four electrons. The electrochemical reduction of oxygen was studied at pH 9.0 buffer solution by using cyclic voltammetry, chronoamperometry, rotating disk electrode voltammetry and scanning electrochemical microscopy techniques. The mediator shows good electrocatalytic ability for the reduction of O(2) at pH 9.0, with reduction of overpotential (350 mV) and increased current response in comparison with results obtained with a bare glassy carbon electrode. The heterogeneous rate constant (k(ME)`) for the reduction of O(2) at the modified electrode was determined by using a Koutecky-Levich plot. In addition, the charge transport rate through the coating and the apparent diffusion coefficient of O(2) into the modifier film were also evaluated. The overall process was found to be governed by the charge transport through the coating, occurring at the interface or at a finite layer at the electrode/coating interface. The proposed study opens up the way for the development of bioelectronic devices based on molecular recognition and self-organization. (C) 2010 Elsevier Ltd. All rights reserved.

Anti-inflammatory activity of essential oil from leaves of Myrciaria tenella and Calycorectes sellowianus

The GC-MS analysis revealed that the leaf essential oils of Myrciaria tenella (DC.) Berg and Calycorectes sellowianus O. Berg (Myrtaceae) were composed of 34 and 37 compounds, respectively. The main constituents of M. tenella oil were beta-caryophyllene (25.1%), and spathulenol (9.7%), while for C. sellowianus were guaiol (13.1%) and beta-caryophyllene (8.6%). The anti-inflammatory effect of both essential oils was investigated in vitro and in vivo. Both oils reduced significantly (p < 0.005) the treated neutrophils chemotaxis with 93% and 91% inhibition for M. tenella and C. sellowianus, respectively. However, in the systemic treatment with the essential oils (50 mg/kg p.o.) only the M. tenella oil was able to significantly reduce the carrageenan-induced paw edema with a similar effect to that observed for indomethacin (10 mg/kg), the positive control.

Amperometric detection of benzoyl peroxide in pharmaceutical preparations using carbon paste electrodes with peroxidases naturally immobilized on coconut fibers

This paper describes the applications of anew carbon paste electrode containing fibers of coconut (Cocus nucifera L) fruit, which are very rich in peroxidase enzymes naturally immobilized on its structure. The new sensor was applied for the amperometric quantification of benzoyl peroxide in facial creams and dermatological shampoos. The amperometric measurements were performed in 0.1 mol L(-1) phosphate buffer (pH 5.2), at 0.0 V (versus Ag/AgCl). On these conditions, benzoyl peroxide was rapidly determined in the 5.0-55 mu mol L(-1), with a detection limit of 2.5 mu mol L(-1) (s/n = 3), response time of 4.1 s (90% of the steady state) and sensitivity limit of 0.33 A mol L(-1) cm(-2). The amperometric results are in good agreement with those obtained by spectrophotometric technique, used as a standard method. (C) 2009 Elsevier B.V. All rights reserved.

Cytotoxicity and antiangiogenic activity of grandisin

Objectives The antitumoural properties of grandisin, a tetrahydrofuran neolignan from Piper solmsianum, were investigated by in-vitro and in-vivo assays using the Ehrlich ascites tumoural (EAT) model. Methods Viability of the tumour cells was evaluated by Trypan blue exclusion and MTT methods, after incubation with grandisin (0.017-2.3 mu M). The effects of grandisin on the activity of caspase-3, -6, -8, and -9 were also investigated using colorimetric protease kits. In-vivo studies were performed in EAT-bearing mice treated intraperitoneally with 2.5, 5 or 10 mg/kg grandisin for 10 days. Key findings Grandisin inhibited the growth of EAT cells, by both methods, with IC50 values less than 0.25 mu M. The results showed that the activity of all the caspases studied increased in grandisin-treated cells, when compared with control, non-treated cells. Administering grandisin to EAT-bearing mice increased survival of the animals, in a dose-dependent manner. Simultaneously, we detected a 66.35% reduction of intraperitoneal tumour cell burden in the animals treated with 10 mg/kg grandisin. Additionally, in these animals, the marked increase of vascular endothelial growth factor (VEGF) levels, induced by EAT development, was decreased with treatment with grandisin, resulting in a reduction of 32.1% of VEGF levels in the peritoneal washing supernatant, when compared with the control. Conclusions The results demonstrated that grandisin induced in-vitro cytotoxicity and antiangiogenic effects in mice while it acted against tumour evolution, prolonging host survival.

Chemical Composition and Antimicrobial Activities of the Essential Oil of Hypericum cordatum (Vell. Conc.) N. Robson (Hypericaceae)

The volatile Constituents of the fresh materials of Hypericum cordatum were isolated by hydrodistillation kind analyzed by CC and GC/MS. The leaves produced 0.04% of a yellowish essential oil and the flowers did not. The main components of the oil were myrcene (40.18%), alpha-pinene (16.40%), and limonene (12%). The antibacterial activities of the oil against Saccharomyces aureus and Escherichia coli and the anti-fungal activities of the oil against the fungi Cladosporium cladosporioides and C. sphaerospemum were evaluated. The oil showed an antibacterial activity against the bacteria S. aureus and anti-fungal activity against the two fungi.

Calorimetric investigations of luminescent films polycarbonate (PC) doped with europium complex [Eu(TTA)(3)(H(2)O)(2)]

Polymers doped with rare earth complexes are advantaged in film production for many applications in the luminescent field. In this luminescent polycarbonate (PC) films doped with diaquatris(thenoyltrifluoroacetonate)europium(III) complex [Eu(TTA)(3)(H(2)O)(2)] were prepared and their calorimetric and luminescent properties in the solid state are reported. The thermal behavior was investigated by utilization of differential scanning calorimetry (DSC) and thermogravimetry (TG). Due of the addition of rare earth [Eu(TTA)(3)(H(2)O)(2)] into PC matrix, changes were observed in the thermal behavior concerning the glass transition and thermal stability. Characteristic broadened narrow bands arising from the (5)D(0) -> (7)F(J) transitions (J = 4-0) of Eu(3+) ion indicate the incorporation of the Eu(3+) ions in the polymer. The luminescent films show enhancement emission intensity with an increase of rare earth concentration in polymeric matrix accompanied by decrease in thermal stability.

In vitro basal cytotoxicity assay applied to estimate acute oral systemic toxicity of grandisin and its major metabolite

Preclinical investigations can start with preliminary in vitro studies before using animal models. Following this approach, the number of animals used in preclinical acute toxicity testing can be reduced. In this study, we employed an in-house validated in vitro cytotoxicity test based on the Spielmann approach for toxicity evaluation of the lignan grandisin, a candidate anticancer agent, and its major metabolite. the 4-O-demethylgrandisin, by neutral red uptake (NRU) assay, on mouse fibroblasts Balb/c 3T3 cell line. Using different concentrations of grandisin and its major metabolite (2.31; 1.16; 0.58; 0.29; 0.14; 0.07; 0.04; 0.002 mu M) in Balb/c 3T3-A31 NRU cytotoxicity assay, after incubation for 48 h, we obtained IC(50) values for grandisin and its metabolite of 0.078 and 0.043 mu M, respectively. The computed LD(50) of grandisin and 4-O-demethylgrandisin were 617.72 and 429.95 mg/kg, respectively. Both were classified under the Globally Harmonized System as category 4. Since pharmacological and toxicological data are crucial in the developmental stages of drug discovery, using an in vitro assay we demonstrated that grandisin and its metabolite exhibit distinct toxicity profiles. Furthermore, results presented in this work can contribute to reduce the number of animals required in subsequent pharmacological/toxicological studies. (C) 2010 Elsevier GmbH. All rights reserved.

Constituents of Leaves Essential Oil of Talauma ovata A. St.-Hil. (Magnoliaceae)

Tire volatile constituents of the fresh leaves of Talauma ovata (Magnoliaceae) were extracted by hydrodistillation and analyzed by GC and GC/MS. Twenty-seven compounds were identified representing 98.8% of the total oil. The oil from this species showed to be constituted by monoterpenes and sesquiterpenes in the same ratio. Among the monoterpenes, limonene (34.8%) and alpha-pinene (11.3%) were the main constituents, and beta-bisabolene (10.7%) was the major substance for the sesquiterpene fraction.

Essential Oil from Leaves and Stem Bark of Southeastern Drimys brasiliensis Miers (Winteraceae)

The chemical composition of essential oils obtained from fresh leaves and stem bark of Southeastern Brazilian native Drimys brasiliensis Miers were analyzed by GC and GC/MS and 37 compounds were identified. The oils from fresh leaves showed the presence of monoterpenes (53.9%) and sesquiterpenes (38.4%), with sabinene (9.5%), myrcene (10.5%), limonene (10.6%) and cyclocolorenone (16.0%) being the most abundant. The stern bark oil was characterized by predominance of sesquiterpenoids (87.6%) and the absence of monoterpenes, the main components being cyclocolorenone (28.3%) and spathuleneol (22.9%). A small amount of phenylpropanes (6.8-6.9%) was also detected in both oil samples.

Simultaneous voltammetric detection of ascorbic acid, dopamine and uric acid using a pyrolytic graphite electrode modified into dopamine solution

Pyrolytic graphite electrodes (PGE) were modified into dopamine solutions using phosphate buffer solutions, pH 10 and 6.5, as supporting electrolyte. The modification process involved a previous anodization of the working electrode at +1. 5 V into 0. 1 mol-L-1 NaOH followed by other anodization step, in the same experimental conditions, into dopamine (DA) solutions. pH of the supporting electrolyte performed an important role in the production of a superficial melanin polymeric film, which permitted the simultaneous detection of ascorbic acid (AA), (DA) and uric acid (UA), Delta EAA-DA = 222 mV-, Delta EAA-UA = 360 mV and Delta EDA-UA=138mV, avoiding the superficial poisoning effects. The calculated detection limits were: 1.4 x 10(-6) mol L-1 for uric acid, 1.3x10-(5) molL(-1) for ascorbic acid and 1.1 X 10(-7) mol L-1 for dopamine, with sensitivities of (7.7 +/- 0.5), (0.061 +/- 0.001) and (9.5 +/- 0.05)A mol(-1) cm(-2), respectively, with no mutual interference. Uric acid was determined in urine, blood and serum human samples after dilution in phosphate buffer and no additional sample pre-treatment was necessary. The concentration of uric acid in urine was higher than the values found in blood and serum and the recovery tests (92-102%) indicated that no matrix effects were observed. (C) 2008 Elsevier B.V. All rights reserved.

Ex Situ Scanning Electrochemical Microscopy (SECM) Investigation of Bismuth- and Bismuth/Lead Alloy Film-Modified Gold Electrodes in Alkaline Medium

Scanning electrochemical microscopy (SECM) in feedback mode was employed to characterise the reactivity and microscopic peculiarities of bismuth and bismuth/lead alloys plated onto gold disk substrates in 0.1 molL(-1) NaOH solutions. Methyl viologen was used as redox mediator, while a platinum microelectrode was employed as the SECM tip. The metal films were electrodeposited ex situ from NaOH solutions containing either bismuth ions only or both bismuth and lead ions. Approach curves and SECM images indicated that the metal films were conductive and locally reactive with oxygen to provide Bi(3+) and Pb(2+) ions. The occurrence of the latter chemical reactions was verified by local anodic stripping voltammetry (ASV) at the substrate solution interface by using a mercury-coated platinum SECM tip. The latter types of measurements allowed also verifying that lead was not uniformly distributed onto the bismuth film electrode substrate. These findings were confirmed by scanning electron microscopy images. The surface heterogeneity produced during the metal deposition process, however, did not affect the analytical performance of the bismuth coated gold electrode in anodic stripping voltammetry for the determination of lead in alkaline media, even in aerated aqueous solutions. Under the latter conditions, stripping peak currents proportional to lead concentration with a satisfactory reproducibility (within 5% RSD) were obtained.