Management of subluxated cataract with capsule anchor implantation

We describe a small case series that provides preliminary evidence of the usefulness of a new capsule-anchoring device for the management of subluxated cataracts. Three eyes of 3 patients with traumatic subluxated cataract causing a significant visual loss were enrolled. Phacoemulsification was performed in all cases with implantation of a capsule-anchoring device (AssiAnchor) because partial zonular dehiscence was present. A significant visual improvement was achieved in the 3 cases. The capsular bag was well centered and the anchors firmly attached to the capsulorhexis and sclera at 12 months postoperatively. The capsule-anchoring device was helpful in managing traumatic subluxated cataracts, enabling effective centration of the intraocular lens–capsular bag complex and, consequently, effective visual restoration.

Clinical Characterization of Asymptomatic or Minimally Symptomatic Young Patients Showing Signs Compatible With Dry Eye: A Pilot Study

Purpose: To evaluate and characterize the clinical profile of young asymptomatic or minimally symptomatic patients without diagnosis of dry eye but showing signs compatible with dry eye syndrome (DES). Methods: Prospective study including a total of 50 consecutive subjects with ages ranging from 18 to 40 years that were identified as asymptomatic or minimally symptomatic by means of the Ocular Surface Disease Index (OSDI) (score of <22). In all patients, a complete battery of tests for the diagnosis of DES was performed including the evaluation of the tear film break-up time (TFBUT), the level of corneal and conjunctival staining, and the eyelid and Meibomian morphology. Results: The OSDI score was significantly higher in women than in men (median: 12.5 vs. 5.3, P=0.01). Low grades of ocular surface staining, dysfunction of Meibomian gland expression, and alteration of quality of Meibomian secretions were observed in 56%, 58%, and 84% of eyes, respectively. More eyes with some dysfunction of Meibomian gland expressibility had a TFBUT less than 5 sec (P=0.033). A statistically significant difference in the OSDI score was found between patients with and without systemic allergies (P=0.036) and between male and female (P=0.01). Likewise, the OSDI score was significantly higher in those women wearing contact lenses compared with those not wearing them (P=0.012). Conclusions: Asymptomatic or minimally symptomatic young subjects may present low grades of clinical signs compatible with DES, with a trend to more symptomatology in women and allergic patients. These outcomes should be confirmed in future studies with larger samples.

Wavefront-Guided Laser Treatment Using a High-Resolution Aberrometer to Measure Irregular Corneas: A Pilot Study

PURPOSE: To evaluate in a pilot study the visual, refractive, corneal topographic, and aberrometric changes after wavefront-guided LASIK or photorefractive keratectomy (PRK) using a high-resolution aberrometer to calculate the treatment for aberrated eyes. METHODS: Twenty aberrated eyes of 18 patients undergoing wavefront-guided LASIK or PRK using the VISX STARS4IR excimer laser and the iDesign aberrometer (Abbott Medical Optics, Inc., Santa Ana, CA) were enrolled in this prospective study. Three groups were differentiated: keratoconus post-CXL group including 11 keratoconic eyes (10 patients), post-LASIK group including 5 eyes (5 patients) with previous decentered LASIK treatments, and post-RK group including 4 eyes (3 patients) with previous radial keratotomy. Visual, refractive, contrast sensitivity, corneal topographic, and ocular aberrometric changes were evaluated during a 6-month follow-up. RESULTS: An improvement in uncorrected (UDVA) and corrected visual acuity (CDVA) associated with a reduction in the spherical equivalent was observed in the three groups, but was only statistically significant in the keratoconus post-CXL and post-LASIK groups (P ≤ .04). All eyes gained one or more lines of CDVA after surgery. Improvements in contrast sensitivity were observed in the three groups, but they were only statistically significant in the keratoconus post-CXL and post-LASIK groups (P ≤ .04). Regarding aberrations, a reduction was observed in trefoil aberrations in the keratoconus post-CXL group (P = .05) and significant reductions in higher-order and primary coma aberrations in the post-LASIK group (P = .04). CONCLUSIONS: Wavefront-guided laser enhancements using the evaluated platform seem to be safe and effective to restore the visual function in aberrated eyes.

Methods and algorithms for video-based multi-point frequency measuring and mapping

Software for video-based multi-point frequency measuring and mapping: http://hdl.handle.net/10045/53429

Software for "Realistic limits for subpixel movement detection"

Object tracking with subpixel accuracy is of fundamental importance in many fields since it provides optimal performance at relatively low-cost. Although there are many theoretical proposals that lead to resolution increments of several orders of magnitude, in practice, this resolution is limited by the imaging systems. In this paper we propose and demonstrate through numerical models a realistic limit for subpixel accuracy. The final result is that maximum achievable resolution enhancement is connected with the dynamic range of the image, i.e. the detection limit is 1/2^(nr.bits). Results here presented may help to proper design of superresolution experiments in microscopy, surveillance, defense and other fields.

Blazed Gratings Recorded in Absorbent Photopolymers

Phase diffractive optical elements, which have many interesting applications, are usually fabricated using a photoresist. In this paper, they were made using a hybrid optic-digital system and a photopolymer as recording medium. We analyzed the characteristics of the input and recording light and then simulated the generation of blazed gratings with different spatial periods in different types of photopolymers using a diffusion model. Finally, we analyzed the output and diffraction efficiencies of the 0 and 1st order so as to compare the simulated values with those measured experimentally. We evaluated the effects of index matching in a standard PVA/AA photopolymer, and in a variation of Biophotopol, a more biocompatible photopolymer. Diffraction efficiencies near 70%, for a wavelength of 633 nm, were achieved for periods longer than 300 µm in this kind of materials.

Retos ergonómicos-visuales actuales y futuros de la HMI en la conducción

Se exponen un balance de los retos actuales y futuros para gestionar de forma eficiente la distracción visual en conductores ante la avalancha tecnológica de pantallas de navegación, ya sea por su tecnología, como por el diseño e interacción con la información visual, e incluso con otros sentidos (táctil, etc.).

Spectrally tunable light source based on light-emitting diodes for custom lighting solutions

This study describes a novel spectral LED-based tunable light source used for customized lighting solutions, especially for the reconstruction of CIE (Commission Internationale de l’Éclairage) standard illuminants. The light source comprises 31 spectral bands ranging from 400 to 700 nm, an integrating cube and a control board with a 16-bit resolution. A minimization algorithm to calculate the weighting values for each channel was applied to reproduce illuminants with precision. The differences in spectral fitting and colorimetric parameters showed that the reconstructed spectra were comparable to the standard, especially for the D65, D50, A and E illuminants. Accurate results were also obtained for illuminants with narrow peaks such as fluorescents (F2 and F11) and a high-pressure sodium lamp (HP1). In conclusion, the developed spectral LED-based light source and the minimization algorithm are able to reproduce any CIE standard illuminants with a high spectral and colorimetric accuracy able to advance available custom lighting systems useful in the industry and other fields such as museum lighting.

Organic distributed feedback laser to monitor solvent extraction upon thermal annealing in solution-processed polymer films

Solution-processed polymer films are used in multiple technological applications. The presence of residual solvent in the film, as a consequence of the preparation method, affects the material properties, so films are typically subjected to post-deposition thermal annealing treatments aiming at its elimination. Monitoring the amount of solvent eliminated as a function of the annealing parameters is important to design a proper treatment to ensure complete solvent elimination, crucial to obtain reproducible and stable material properties and therefore, device performance. Here we demonstrate, for the first time to our knowledge, the use of an organic distributed feedback (DFB) laser to monitor with high precision the amount of solvent extracted from a spin-coated polymer film as a function of the thermal annealing time. The polymer film of interest, polystyrene in the present work, is doped with a small amount of a laser dye as to constitute the active layer of the laser device and deposited over a reusable DFB resonator. It is shown that solvent elimination translates into shifts in the DFB laser wavelength, as a consequence of changes in film thickness and refractive index. The proposed method is expected to be applicable to other types of annealing treatments, polymer-solvent combinations or film deposition methods, thus constituting a valuable tool to accurately control the quality and reproducibility of solution-processed polymer thin films.

Realistic limits for subpixel movement detection

Object tracking with subpixel accuracy is of fundamental importance in many fields since it provides optimal performance at relatively low cost. Although there are many theoretical proposals that lead to resolution increments of several orders of magnitude, in practice this resolution is limited by the imaging systems. In this paper we propose and demonstrate through simple numerical models a realistic limit for subpixel accuracy. The final result is that maximum achievable resolution enhancement is connected with the dynamic range of the image, i.e., the detection limit is 1/2∧(nr.bits). The results here presented may aid in proper design of superresolution experiments in microscopy, surveillance, defense, and other fields.

CIMBNC- Combination and interactions of three kinds of nanoclays structural modifiers, for the colored bio-nanocomposites optimization

Biopolymers do not have competitive prices, which has prevented their industrial exploitation on a global scale so far. In this context, Using nanoclays, improvements in certain biopolymer properties, mainly mechanical and thermal, have been achieved. However, research has been much less focused on changing optical properties through the incorporation of nanoclays. At the same time, current research has focused on obtaining nanopigments, by organic dyes adsoptions into different nanoclays in order to achieve sustainable colouring and high performance materials. By combining advances in these lines of research, biodegradable composites with optimal mechanical and optical properties can be obtained. The aim of this work is to find the optimal formulation of naturally sourced nanopigments, incorporate them into a biological origin epoxy resin, and obtain a significant improvement in their mechanical, and optical properties. We combine three structural modifiers in the nanopigment synthesis: surfactant, silane and mordant salt. The latter was selected in order to replicate the mordant textile dyeing with natural dyes. Using a Taguchi’s desing L8, we look for the effect of the presence of the modifiers, the pH acidification, and the interactions effect between the synthesis factors. Three natural dyes were selected: chlorophyll, beta-carotene, and beetroot extract. Furthermore we use two kinds of laminar nanoclays, differentiated by the ion exchange charge: montmorillonite, and hydrotalcite. Then the thermal, mechanical and colorimetric characterization of the bionanocomposite materials was carried out. The optimal conditions to obtain the best bionanocomposite materials are using acid pH, and modifying the nanoclays with mordant and surfactant.

Seguimiento del Grado en Óptica y Optometría

En el marco del proyecto de Redes de Investigación en Docencia Universitaria 2014-15 de la Universidad de Alicante se creó, como en años anteriores, una red de trabajo formada por los profesores coordinadores de semestre y el profesor responsable de la Clínica Optométrica con el fin de realizar un seguimiento del Grado en Óptica y Optometría. Siguiendo el trabajo llevado a cabo en convocatorias anteriores, esta red de seguimiento ha prestado especial atención a la coordinación de las asignaturas de Optometría, presentes en todos los cursos, el Trabajo Fin de Grado y las Prácticas Externas. El elevado número de profesores involucrado en estas asignaturas, exige un mayor nivel de coordinación. Durante el desarrollo del curso académico se han recogido las sugerencias y propuestas realizadas a través de diferentes comisiones, así como a partir de las reuniones con el alumnado. Las comisiones que han participado son la Comisión de Grado, las comisiones de semestre y la comisión de garantía de calidad. El objetivo final ha sido optimizar el funcionamiento del título, tanto en la distribución de contenidos, como en las metodologías docentes y de evaluación de las distintas materias que componen el plan de estudios.

Seguimiento y plan de mejora en el Máster Universitario en Ingeniería de Telecomunicación: Criterios, evidencias y resultados

En este trabajo se plantea estudiar los criterios, organizar las evidencias y recopilar los resultados que permiten desarrollar el auto-informe para la acreditación título en la ANECA de Máster Universitario en Ingeniería de Telecomunicación de la Universidad de Alicante. Por ello, la red de investigación en docencia universitaria planteada implica a todas las asignaturas de estos estudios, incluido el Trabajo Fin de Máster. Para alcanzar los objetivos se comienza por la recopilación detallada de los criterios para el desarrollo del auto-informe y la documentación a cumplimentar. En la organización de las evidencias relacionadas con cada uno de los criterios a evaluar, generadas en cada curso de implantación del título, el trabajo se ha centrado en el criterio 6 (Resultados del aprendizaje) y el criterio 7 (Indicadores de satisfacción). Las tablas comparativas elaboradas, donde se resumen los resultados del aprendizaje, facilitan la puesta en común y la concreción de un plan de mejora.

Red de seguimiento del Grado en Criminología on line

La red tenía por objeto llevar a cabo un especial seguimiento del grupo on line del Grado en Criminología que se imparte en la titulación y para el que son necesarios esfuerzos de coordinación adicionales y métodos docentes específicos a la docencia no presencial. Así, la red ha constituido un espacio de reflexión sobre docencia no presencial, que ha dado como resultado la adopción e implementación de acciones de mejora.

RedPlag: El plagio en los trabajos docentes de los estudiantes universitarios

El plagio académico entre el alumnado universitario puede entenderse de varias formas; por ejemplo el uso de un material de otra fuente haciéndolo pasar como propio sin proporcionar las correspondientes referencias o, también, la presentación del trabajo de otro estudiante, o usar un mismo trabajo en dos asignaturas diferentes. Las cifras de plagio entre estudiantes universitarios varían entre un 19% a un 81%. Para abordar este tema, es necesario primero tener una aproximación de las cifras de plagio en nuestra universidad. El objetivo de este estudio es estimar la frecuencia de plagio entre estudiantes universitarios de la Universidad de Alicante en función de la edad, el sexo, la titulación y si han recibido formación sobre plagio previamente. Se ha realizado una encuesta a 305 alumnos de tres titulaciones diferentes. Los resultados muestran que la frecuencia de plagio directo fue de 6,6 y de 8,2 por pares, sin diferencias por edad y sexo. Un alto porcentaje de alumnos piensa que el plagio es inevitable, dato que debe hacernos recapacitar sobre la importancia de establecer medidas para disminuir esta creencia. No obstante, no sólo debe profundizarse en la formación, dado que también señalan como causas la sobrecarga de trabajo e incluso la comodidad.