Three-dimensional simulation of the rolling of a saturated fibro-porous media

This paper describes recent advances made in computational modelling of the sugar cane liquid extraction process. The saturated fibro-porous material is rolled between circumferentially grooved rolls, which enhance frictional grip and provide a low-resistance path for liquid flow during the extraction process. Previously reported two-dimensional (2D) computational models, account for the large deformation of the porous material by solving the fully coupled governing fibre stress and fluid-flow equations using finite element techniques. While the 2D simulations provide much insight into the overarching cause-effect relationships, predictions of mechanical quantities such as roll separating force and particularly torque as a function of roll speed and degree of compression are not satisfactory for industrial use. It is considered that the unsatisfactory response in roll torque prediction may be due to the stress levels that exist between the groove tips and roots which have been largely neglected in the geometrically simplified 2D model. This paper gives results for both two- and three-dimensional finite element models and highlights their strengths and weaknesses in predicting key milling parameters. (c) 2005 Elsevier B.V. All rights reserved.

Wheat grain cooking process as investigated by modulated temperature differential scanning calorimetry

The thermal properties of soft and hard wheat grains, cooked in a steam pressure cooker, as a function of cooking temperature and time were investigated by modulated temperature differential scanning calorimetry (MTDSC). Four cooking temperatures (110, 120, 130 and 140 degrees C) and six cooking times (20, 40, 60, 80, 100 and 120 min) for each temperature were studied. It was found that typical non-reversible heat flow thermograms of cooked and uncooked wheat grains consisted of two endothermic baseline shifts localised around 40-50 degrees C and then 60-70 degrees C. The second peaks of non-reversible heat flow thermograms (60-70 degrees C) were associated with starch gelatinisation. The degree of gelatinisation was quantified based on these peaks. In this study, starch was completely gelatinised within 60-80 min for cooking temperatures at 110-120 degrees C and within 20 min for cooking temperatures at 130-140 degrees C. MTDSC detected reversible endothermic baseline shifts in most samples, localised broadly around 48-67 degrees C with changes in heat capacity ranging from 0.02 to 0.06 J/g per degrees C. These reversible endothermic baseline shifts are related to the glass transition, which occurs during starch gelatinisation. Data on the specific heat capacity of the cooked wheat samples are provided. (C) 2005 Elsevier Ltd. All rights reserved.

Effects of structural variation in xyloglucan polymers on interactions with bacterial cellulose

A cellulose/xyloglucan framework is considered to form the basis for the mechanical properties of primary plant cell walls and hence to have a major influence on the biomechanical properties of growing, fleshy plant tissues. In this study, structural variants of xyloglucan have been investigated as components of composites with bacterial cellulose as a simplified model for the cellulose/xyloglucan framework of primary plant cell walls. Evidence for molecular binding to cellulose with perturbation of cellulose crystallinity was found for all xyloglucan types. High molecular mass samples gave homogeneous centimeter-scale composites with extensive cross-linking of cellulose with xyloglucan. Lower molecular mass xyloglucans gave heterogeneous composites having a range of microscopic structures with little, if any, cross-linking. Xyloglucans with reduced levels of galactose substitution had evidence of self-association, competitive with cellulose binding. At comparable molecular mass, fucose substitution resulted in a modest promotion of microscopic features characteristic of primary cell walls. Taken together, the data are evidence that galactose substitution of the xyloglucan core structure is a major determinant of cellulose composite formation and properties, with additional fucose substitution acting as a secondary modulator. These conclusions are consistent with reported structural and mechanical properties of Arabidopsis mutants lacking specific facose and/or galactose residues.

Relative validity of food intake estimates using a food frequency questionnaire is associated with sex, age, and other personal characteristics

We invostigated the validity of food intake estimates obtained by a self-administered FFQ relative to weighed food records (WFR) and the extent to which demographic, anthropometric, and social characteristics explain differences between these methods. A community-based sample of 96 Australian adults completed a FFQ and 12 d of WFR over 12 mo. The FFQ was adapted to the Australian setting from the questionnaire used in the US Nurses' Health Study. Spearman rank correlation coefficients ranged from 0.08 for other vegetables to 0.88 for tea. Exact agreement by quartiles of intake ranged from 27% (eggs) to 63% (tea). Differences between FFQ and WFR regressed on personal characteristics were significantly associated with at least 1 characteristic for 20 of the 37 foods. Sex was significantly associated with differences for 17 food groups, including 5 specific vegetable groups and 2 total fruit and vegetable groups. Use of dietary supplements and the presence of a medical condition were associated with differences for 5 foods; age, school leaving age, and occupation were associated with differences for 1-3 foods. BMI was rot associated with differences for any foods. Regression models explained from 3% (wholemeal bread) to 37% (for all cereals and products) of variation in differences between methods. We conclude that the relative validity of intake estimates obtained by FFQ is different for men and women for a large number of foods. These results highlight the need for appropriate adjustment of diet-disease relations for factors affecting the validity of food intake estimates.

Factors that affect bone mineral accrual in the adolescent growth spurt

The development of bone mass during the growing years is an important determinant for risk of osteoporosis in later life. Adequate dietary intake during the growth period may be critical in reaching bone growth potential. The Saskatchewan Bone Mineral Accrual Study (BMAS) is a longitudinal study of bone growth in Caucasian children. We have calculated the times of maximal peak bone mineral content (BMC) velocity to be 14.0 +/- 1.0 y in boys and 12.5 +/- 0.9 y in girls; bone growth is maximal similar to6 mo after peak height velocity. In the 2 y of peak skeletal growth, adolescents accumulate over 25% of adult bone. BMAS data may provide biological data on calcium requirements through application of calcium accrual values to factorial calculations of requirement. As well, our data are beginning to reveal how dietary patterns may influence attainment of bone mass during the adolescent growth spurt. Replacing milk intake by soft drinks appears to be detrimental to bone gain by girls, but not boys. Fruit and vegetable intake, providing alkalinity to bones and/or acting as a marker of a healthy diet, appears to influence BMC in adolescent girls, but not boys. The reason why these dietary factors appear to be more influential in girls than in boys may be that BMAS girls are consuming less than their requirement for calcium, while boys are above their threshold. Specific dietary and nutrient recommendations for adolescents are needed in order to ensure optimal bone growth and consolidation during this important life stage.

Effect of addition of maltodextrin on drying kinetics and stickiness of sugar and acid-rich foods during convective drying: experiments and modelling

The effect of addition of maltodextrin on drying kinetics of drops containing fructose, glucose, sucrose and citric acid individually and in mixtures was studied experimentally using single drop drying experiments and numerically by solving appropriate mass and heat transfer equations. The numerical predictions agreed with the experimental moisture and temperature histories within 5-6% average relative (absolute) errors and average differences of +/- 1degreesC, respectively. The stickiness of these drops was determined using the glass transition temperature (T-g) of the drops' surface layer as an indicator. The experimental stickiness histories followed the model predictions with reasonable accuracy. A safe drying (non-sticky) regime in a spray drying environment has been proposed, and used to estimate the optimum amount of addition of maltodextrin for successful spray drying of 120 micron diameter droplets of fruit juices. (C) 2003 Elsevier Ltd. All rights reserved.

Dietary patterns and metabolic syndrome - a review of epidemiologic evidence

Metabolic syndrome is associated with increased risk of coronary heart disease and type 2 diabetes, and appears to be widely prevalent in both developed and developing countries. While lifestyle modification is recommended for management of the syndrome, the dietary pattern most beneficial for patients is yet to be ascertained. Original research papers from the Medline database were examined for dietary patterns that may be associated with the syndrome. Three large-scale epidemiological studies were found fitting our criteria. Dietary patterns high in fruit and vegetable content were generally found to be associated with lower prevalence of metabolic syndrome. Diet patterns with high meat intake were frequently associated with components of metabolic syndrome, particularly impaired glucose tolerance. High dairy intake was generally associated with reduced risk for components of metabolic syndrome with some inconsistency in the literature regarding risk of obesity. Minimally processed cereals appeared to be associated with decreased risk of metabolic syndrome, while highly processed cereals with high glycaemic index are associated with higher risk. Fried foods were noticeably absent from any dietary pattern associated with decreased prevalence of metabolic syndrome. The conclusion of this review is that no individual dietary component could be considered wholly responsible for the association of diet with metabolic syndrome. Rather it is the overall quality of the diet that appears to offer protection against lifestyle disease such as metabolic syndrome. Further research is required into conditions, such as overweight and obesity, which may influence the effect of diet on the development of metabolic syndrome.

Preparation and characterization of mesoporous Ni/Zr-laponite for the catalytic deoxygenation of vegetable oils into liquid hydrocarbons

The deoxygenation of vegetable oils was studied over a Ni/Zr-laponite catalyst in various nickel loading composition. Stearic acid has been used as a model compounds. The liquid and gas products were analyzed using gas chromatograph equipped with thermal conductivity detector and flame ionization detector. From product distribution it was determined the effect of catalyst composition on reaction conditions