Structural and mechanical properties of nanostructured granular alumina catalysts

Granular gamma-Al2O3 support and 8 wt % CuO/gamma-Al2O3 catalyst were synthesized by a sol-gel granulation method. The pore structure, crush strength, hardness, and elasticity of these sol-gel-derived catalysts were studied and compared with similar commercial catalysts prepared by non-sol-gel methods. Alumina and CuO-coated alumina granular particles prepared by different methods have different macro- and microstructure. The sol-gel-derived granular gamma-alumina and CuO-coated gamma-alumina granular particles have a structure defined by compact packing of uniform, nanosized gamma-alumina crystallites. They are characterized by a more uniform pore size distribution and larger surface area as compared to similar commercial samples with a structure defined by packing of aggregates consisting of nonuniform gamma-alumina crystallites. Because of the differences in the macro- and microstructure, the sol-gel-derived granular samples offer higher crush strength and greater hardness than the commercial samples.

Chemical analysis of powdered metallurgical slags by X-ray fluorescence spectrometry

Slag composition determines the physical and chemical properties as well as the application performance of molten oxide mixtures. Therefore, it is necessary to establish a routine instrumental technique to produce accurate and precise analytical results for better process and production control. In the present paper, a multi-component analysis technique of powdered metallurgical slag samples by X-ray Fluorescence Spectrometer (XRFS) has been demonstrated. This technique provides rapid and accurate results, with minimum sample preparation. It eliminates the requirement for a fused disc, using briquetted samples protected by a layer of Borax(R). While the use of theoretical alpha coefficients has allowed accurate calibrations to be made using fewer standard samples, the application of pseudo-Voight function to curve fitting makes it possible to resolve overlapped peaks in X-ray spectra that cannot be physically separated. The analytical results of both certified reference materials and industrial slag samples measured using the present technique are comparable to those of the same samples obtained by conventional fused disc measurements.

On the role of magnesium and nitrogen in the infiltration of aluminium by aluminium for rapid prototyping applications

Selective laser sintering has been used to fabricate an aluminium alloy powder preform which is subsequently debound and infiltrated with a second aluminium alloy. This represents a new rapid manufacturing system for aluminium that can be used to fabricate large, intricate parts. The base powder is an alloy such as AA6061. The infiltrant is a binary or higher-order eutectic based on either Al-Cu or At-Si. To ensure that infiltration occurs without loss of dimensional precision, it is important that a rigid skeleton forms prior to infiltration. This can be achieved by the partial transformation of the aluminium to aluminium nitride. In order for this to occur throughout the component, magnesium powder must be added to the alumina support powder which surrounds the part in the furnace. The magnesium scavenges the oxygen and thereby creates a microclimate in which aluminium nitride can form. The replacement of the ionocovalent Al2O3 with the covalent AlN on the surface of the aluminium powders also facilitates wetting and thus spontaneous and complete infiltration. (C) 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Soft tissue sarcomas in dogs: A study assessing surgical margin, tumour grade and clinical outcome

The purpose of this prospective clinical study was to quantify the surgical margin necessary to maximise local disease control for canine soft tissue sarcoma of various grades. This was achieved via gross and histopathologic studies. Fourteen dogs underwent surgical treatment for 15 localised, measurable, subcutaneous sarcomas. Surgery and histopathologic evaluation were performed to standardised protocols. Regular examinations for local recurrence and distant metastases were performed for at least 12 months postoperatively. One hundred percent local disease control was achieved with deep margins >10mm and 93% one year disease-free survival with wide margins (i.e. >10mm laterally and one fascial plane or >10mm in depth). There was one case of recurrence. Fascial planes appear to act as biological barriers to local tumour invasion but this protective effect may be overcome with high-grade lesions.

The association between continuous naming speed and word reading skill in fourth- to sixth-grade children

A correlational study was designed to examine the general processing speed and orthographic processing speed accounts of the association between continuous naming speed and word reading skill in children from fourth to sixth grade. Children were given two tests of each of the following constructs: word reading skill, alphanumeric symbol naming speed, nonsymbol naming speed, alphanumeric processing speed, and nonsymbol processing speed. Results were not completely consistent with either the general processing speed or the orthographic processing speed accounts. Although an alphanumeric symbol processing efficiency component is clearly involved, it is argued that the particularly strong association between naming speed and word reading also reflects the efficiency of phonological processing in children of this age.

Assigning dates to thin gneissic veins in high-grade metamorphic terranes: A cautionary tale from Akilia, southwest Greenland

A granodiorite from Akilia, southwest Greenland, previously suggested to date putative life-bearing rocks to greater than or equal to3.84 Ga, is re-investigated using whole-rock major and trace-element geochemistry, and detailed cathodoluminescence image-guided secondary ion mass spectrometer analyses of zircon U-Th-Pb and rare earth elements. Complex zircon internal structure reveals three episodes of zircon growth and/or recrystallization dated to c. 3.84 Ga, 3.62 Ga and 2.71 Ga. Rare earth element abundances imply a significant role for garnet in zircon generation at 3.62 Ga and 2.71 Ga. The 3.62 Ga event is interpreted as partial melting of a c. 3.84 Ga grey gneiss precursor at granulite facies with residual garnet. Migration of this 3.62 Ga magma (or melt-crystal mush) away from the melt source places a maximum age limit on any intrusive relationship. These early Archaean relationships have been complicated further by isotopic reworking in the 2.71 Ga event, which could have included a further episode of partial melting. This study highlights a general problem associated with dating thin gneissic veins in polyphase metamorphic terranes, where field relationships may be ambiguous and zircon inheritance can be expected.

Effect of Al2O3 and Cr2O3 on loquidus temperatures in the cristobalite and tridymite primary phase fields of the MgO-"FeO"-SiO2 ststem in equilibrium with metallic iron

The effects of alumina and chromite impurities on the liquidus temperatures in the cristobalite/tridymite (SiO2) primary phase fields in the MgO-FeO-SiO, system in equilibrium with metallic iron have been investigated experimentally. Using high temperature equilibration and quenching followed by electron probe X-ray microanalysis (EPMA), liquiclus isotherms have been determined in the temperatures range 1 673 to 1 898 K. The results are presented in the form of pseudo-ternary sections of the MgO-FeO-SiO, system at 2, 3 and 5 wt% Al2O3, 2 wt% Cr2O3, and 2 wt% Cr2O3+2 wt% Al2O3. The study enables the liquidus to be described for a range of SiO2/MgO and MgO/FeO ratios. It was found that liquiclus temperatures in the cristobalite and tridymite primary phase fields, decrease significantly with the addition of Al2O3 and Cr2O3.

Specific morphological features predictive for the basal phenotype in grade 3 invasive ductal carcinoma of breast

Aims: Cytokeratin (CK) 14, a myoepithelial marker, is also expressed in a proportion of breast carcinomas. There is evidence that these tumours show a differing metastatic pattern and clinical outcome from other invasive ductal carcinomas (IDCs) and may need different management. Currently, they are not identified in routine practice and no morphological guidelines exist to aid their identification. The aim of this study was to analyse the histological features of CK14+ IDC. Methods and results: A detailed histological review of 453 grade 3 IDCs revealed 88 (19.4%) that expressed CK14. Assessment was made independently by two pathologists using a standardized 'tick-box' proforma covering grade, architectural and cytological features. The results were analysed using logistic regression to identify features that predicted for basal phenotype. Concordance between the two pathologists was fair to good for most parameters (kappa 0.4-0.6). On multiple logistic regression, the basal phenotype was highly significantly associated with the presence of a central scar (P = 0.005), tumour necrosis (P < 0.0001), presence of spindle cells (P = 0.006) or squamous metaplasia (P < 0.0001), high total mitotic count (> 40 per 10 high-power field) (P = 0.0002) and high nuclear-cytoplasmic ratio (P = 0.0002). Conclusions: Specific morphological features are strongly associated with basal-like breast carcinoma. These could be used in routine diagnostic practice to identify this important subset of tumours.

Serologic response to human papillomavirus 16 among Australian women with high-grade cervical intraepithelial neoplasia

This study evaluated the detection of human papillomavirus (HPV) 16 antibody in HPV 16-associated cervical intraepithelial neoplasia (CIN) in Australian women. Seroreactivity to HPV 16 L1 virus-like particles was assessed in patients with CIN 2 (n = 169) and CIN 3 (n = 229) lesions previously tested for the presence of HPV DNA. Seropositivity was significantly commoner in women with HPV 16 DNA-positive lesions (98/184) than in women with no HPV DNA in the lesion (15/47) or with HPV of types other than 16 in the lesion (43/167) (P = 0.0004). In addition, seropositivity was observed in 33% (55/169) of women with CIN 2 and 46% (106/229) of women with CIN 3, in keeping with the lower fraction of CIN 2 (57/169) than CIN 3 (127/229) biopsies positive for HPV 16 DNA. HPV 16 seropositivity is most common in women with HPV 16-associated CIN, but many patients with HPV-associated CIN 3 are seronegative, and HPV 16 seropositivity is common in women with CIN associated with other HPV types. Overall, HPV 16 serology is a poor predictor of presence of HPV 16-associated CIN 3 in patient population studied.

SIFA: A tool for evaluation of high-grade security devices

We describe a tool for analysing information flow in security hardware. It identifies both sub-circuits critical to the preservation of security as well as the potential for information flow due to hardware failure. The tool allows for the composition of both logical and physical views of circuit designs. An example based on a cryptographic device is provided.