Developing mathematics support for first-year engineering students with non-traditional mathematics backgrounds

A maths support system for first-year engineering students with non-traditional entry qualifications has involved students working through practice questions structured to correspond with the maths module which runs in parallel. The setting was informal and there was significant one-to-one assistance. The non-traditional students (who are known to be less well prepared mathematically) were explicitly contacted in the first week of their university studies regarding the maths support and they generally seemed keen to participate. However, attendance at support classes was relatively low, on average, but varied greatly between students. Students appreciated the personal help and having time to ask questions. It seemed that having a small group of friends within the class promoted attendance – perhaps the mutual support or comfort that they all had similar mathematical difficulties was a factor. The classes helped develop confidence. Attendance was hindered by the class being timetabled too soon after the relevant lecture and students were reluctant to come with no work done beforehand. Although students at risk due to their mathematical unpreparedness can easily be identified at an early stage of their university career, encouraging them to partake of the maths support is an ongoing, major problem.

Women into Non-Traditional Sectors: Addressing Gender Segregation in the Northern Ireland Workforce

The horizontal segregation of the workforce along gender lines tends to assign women to lower paid, lower status employment. Consequently, schemes to address segregation have focused on preparing women to enter non‐traditional occupations through training and development processes. This article examines models to encourage women into non‐traditional employment, focusing on the Women into Non‐Traditional Sectors (WINS) project in Belfast, Northern Ireland. However, changing women to suit a hostile work environment assumes women to be the problem, whereas it is the barriers that women face in undertaking non‐traditional jobs that need to be changed. It is concluded, therefore, that while models such as WINS can be successful in assisting women into non‐traditional sectors, change processes to make workplaces more accessible are a more pressing and appropriate approach to de‐segregating the workforce.

Mathematics Learning Support in Ireland in 2015

The provision of mathematics learning support in higher-level institutions on the island of Ireland has developed rapidly in recent times with the number of institutions providing some form of support doubling in the past seven years. The Irish Mathematics Learning Support Network aims to inform all mathematics support practitioners in Ireland on relevant issues. Consequently it was decided that a detailed picture of current provision was necessary. A comprehensive online survey was conducted to amass the necessary data. The ultimate aim of the survey is to benefit all mathematics support practitioners in Ireland, in particular those in third-level institutions who require further support to enhance the mathematical learning experience of their students. The survey reveals that the majority of Irish higher-level institutions provide mathematics learning support to some extent, with 65% doing so through a support centre. Learners of service mathematics are the primary users: first-year science, engineering and business undergraduates, with non-traditional students being a sizeable element. Despite the growing recognition for the need to offer mathematics learning support almost half of the centres are subject to annual review. Further, less than half the support offerings have a dedicated full-time manager, while 60% operate with a staff of five or fewer. The elevation of mathematics support as a viable and worthwhile career in order to attract and retain high quality staff is seen by many respondents as the crucial next phase of development.

Interpreting A-level Mathematics grades – as easy as A, B, C?

Many concerns have been expressed that students’ basic mathematical skills have deteriorated during the 1990s and there has been disquiet that current A-level grading does not distinguish adequately between the more able students. This study reports the author’s experiences of teaching maths to large classes of first-year engineering students and aims to enhance understanding of levels of mathematical competence in more recent years. Over the last four years, the classes have consisted of a very large proportion of highly qualified students – about 91% of them had at least grade B in A-level Mathematics. With a small group of students having followed a non-traditional route to university (no A-level maths) and another group having benefitted through taking A-level Further Mathematics at school, the classes have contained a very wide range of mathematical backgrounds. Despite the introductory maths course at university involving mainly repetition of A-level material, students’ marks were spread over a very wide range – for example, A-level Mathematics grade B students have scored across the range 16 – 97%. Analytical integration is the topic which produced the largest variation in performance across the class but, in contrast, the A-level students generally performed well in differentiation. Initial analysis suggests some stability in recent years in the mathematical proficiency of students with a particular A-level Mathematics grade. Allowing choice of applied maths modules as part of the A-level maths qualification increases the variety of students’ mathematical backgrounds and their selection from mechanics, statistics or decision maths is not clear from the final qualification.

Time Efficient Assessment and Feedback Methods for Large Computer-Aided-Design Cohorts

Timely and individualized feedback on coursework is desirable from a student perspective as it facilitates formative development and encourages reflective learning practice. Faculty however are faced with a significant and potentially time consuming challenge when teaching larger cohorts if they are to provide feedback which is timely, individualized and detailed. Additionally, for subjects which assess non-traditional submissions, such as Computer-Aided-Design (CAD), the methods for assessment and feedback tend not to be so well developed or optimized. Issues can also arise over the consistency of the feedback provided. Evaluations of Computer-Assisted feedback in other disciplines (Denton et al, 2008), (Croft et al, 2001) have shown students prefer this method of feedback to traditional “red pen” marking and also that such methods can be more time efficient for faculty.
Herein, approaches are described which make use of technology and additional software tools to speed up, simplify and automate assessment and the provision of feedback for large cohorts of first and second year engineering students studying modules where CAD files are submitted electronically. A range of automated methods are described and compared with more “manual” approaches. Specifically one method uses an application programming interface (API) to interrogate SolidWorks models and extract information into an Excel spreadsheet, which is then used to automatically send feedback emails. Another method describes the use of audio recordings made during model interrogation which reduces the amount of time while increasing the level of detail provided as feedback.
Limitations found with these methods and problems encountered are discussed along with a quantified assessment of time saving efficiencies made.

A realist synthesis of educational interventions to improve nutrition care competencies and delivery by doctors and other healthcare professionals

Objective: To determine what, how, for whom, why, and in what circumstances educational interventions to improve the delivery of nutrition care by doctors and other healthcare professionals work?

Design: Realist synthesis following a published protocol and reported following Realist and Meta-narrative Evidence Synthesis: Evolving Standards (RAMESES) guidelines. A multidisciplinary team searched Medline, CINAHL, ERIC, EMBASE, PsyINFO, Sociological Abstracts, Web of Science, Google Scholar, and Science Direct for published and unpublished (grey) literature. The team identified studies with varied designs; appraised their ability to answer the review question; identified relationships between contexts, mechanisms, and outcomes (CMOs); and entered them into a spreadsheet configured for the purpose. The final synthesis identified commonalities across CMO configurations.

Results: Over half of the 46 studies from which we extracted data originated from the US. Interventions that improved the delivery of nutrition care improved skills and attitudes rather than just knowledge; provided opportunities for superiors to model nutrition care; removed barriers to nutrition care in health systems; provided participants with local, practically relevant tools and messages; and incorporated non-traditional, innovative teaching strategies. Operating in contexts where student and qualified healthcare professionals provided nutrition care in both developed and developing countries, these interventions yielded health outcomes by triggering a range of mechanisms, which included: feeling competent; feeling confident and comfortable; having greater self-efficacy; being less inhibited by barriers in healthcare systems; and feeling that nutrition care was accepted and recognised.

Conclusion: These findings show how important it is to move education for nutrition care beyond the simple acquisition of knowledge. They show how educational interventions embedded within systems of healthcare can improve patients’ health by helping health students and professionals to appreciate the importance of delivering nutrition care and feel competent to deliver it.

Vergilius Redivivus: Studies in Joseph Addison's Latin Poetry

J.W. Binns, Modern Language Review 101.2 (2006), 504-5:
‘This book is an important contribution to the study of Anglo-Latin poetry in the late seventeenth and early eighteenth centuries … ’Haan provides an able and authoritative account …, setting the poems in their contexts, and providing for each a very clear and penetrating analysis which traces the classical well-springs that lie behind much of Addison’s Latin writing, and also calls attention to non-traditional elements’.

Creative Activism: a pedagogical and research tool

Environmental activism has a long history in protest, addressing issues of degradation and segregation that threaten existing ecologies, social and built fabrics. Environmental activism is traditionally understood as a reaction, chiefly by groups of people, against a perceived external threat. In the 60’s and 70’s, an activist stance began to emerge in the work of some artists and architects, who used creative methods such as performances, happenings, temporary spatial interventions etc to convey their political/aesthetic messages. Some of this work engaged directly with communities but predominantly it was the production of one individual working ‘outside’ society. However such actions demonstrated not only the power of the visual in conveying a political message but also the potential of conceptual creative approaches to reveal alternative values and hidden potentials. This marked a shift from activism as protestation towards an activism of reconceptualisation. Recently, activist groups have developed a more politically informed process. Whilst their ‘tools’ may resemble work from the 60’s and 70’s , their methodologies are non-traditional, ’rhizomatic’, pedagogical and fluid; working alongside, rather than against, the established power and funding structures. Such creative processes build new, often unexpected, stakeholder networks; offer neutral spaces in which contentious issues can be faced; and create better understanding of values and identities. They can also lead to permanent improvements and development in the physical fabric. This paper will discuss a pedagogical example of activism in architectural education. The event (www.fourdaysontheoutside.com) is in its fifth year of existence and as such has revealed a value and impulse beyond its learning and teaching value. The paper will discuss how the event contributes to the university’s outreach programme and how its structure acts as a seedbed for potential research projects and partnerships. UK Universities talk extensively about applied research but have few actual strategies by which to generate it. Fourdaysontheoutside offers some potential ways forward.

Thermomechanical Response of Variable Stiffness Composite Panels

Analysis of non-traditional Variable Stiffness (VS) laminates, obtained by steering the fiber orientation as a spatial function of location, have shown to improve buckling load carrying capacity of flat rectangular panels under axial compressive loads. In some cases the buckling load of simply supported panels doubled compared to the best conventional laminate with straight fibers. Two distinct cases of stiffness variation, one due to fiber orientation variation in the direction of the loading, and the other one perpendicular to the loading direction, were identified as possible contributors to the buckling load improvements. In the first case, the increase was attributed to the favorable distribution of the transverse in-plane stresses over the panel platform. In the second case, a higher degree of improvement was obtained due to the re-distribution of the applied in-plane loads. Experimental results, however, showed substantially higher levels of buckling load improvements compared with theoretical predictions. The additional improvement was determined to be due to residual stresses introduced during curing of the laminates. The present paper provides a simplified thermomechanical analysis of residual stress state of variable stiffness laminates. Systematic parametric analyses of both cases of fiber orientation variations show that, indeed much higher buckling loads could result from the residual stresses present in such laminates.

Clarifying the acquis humanitaire: a transnational legal perspective on the internalization of humanitarian norms

Although the international obligations and institutional frameworks for disaster response are not yet settled, as evidenced by the International Law Commission’s work on the protection of persons in the event of disasters and the on-going promotion of disaster laws by the Red Cross Movement; the diverse source and nature of such initiatives suggests that the international community is engaged in a process of norm creation, elaboration and interpretation reflecting a desire for legal clarity in humanitarian operations. Situated within the framework of transnational law, this paper argues that an acquis humanitaire, based on the principle of humanity, encapsulates the evolving body of law and practice specifically relating to the protection of persons in times of humanitarian crisis in both armed conflicts and natural or human-made disasters. Reflecting the non-traditional, non-statist, dynamic and normative basis of transnational legal process, as elaborated by Harold Koh, the constant flow of ideas and principles between the national, regional and international spheres provides an analytical framework for the on-going transnational dialogues on the social, political and legal internalization of humanitarian norms. Drawing on the internalization of humanitarian norms within the United Kingdom, this paper concludes that as the international community examines the codification of a universal legal framework for the protection of persons in the event of disasters it is necessary to understand the transnational process of interpretation and internalization of humanitarian norms, and how this may vary across different regions and countries.

Strange, But True? Object-oriented Programming Is Best Taught, And Learnt, While Sitting On The Floor.

There is a perception amongst some of those learning computer programming that the principles of object-oriented programming (where behaviour is often encapsulated across multiple class files) can be difficult to grasp, especially when taught through a traditional, didactic ‘talk-and-chalk’ method or in a lecture-based environment.
We propose a non-traditional teaching method, developed for a government funded teaching training project delivered by Queen’s University, we call it bigCode. In this scenario, learners are provided with many printed, poster-sized fragments of code (in this case either Java or C#). The learners sit on the floor in groups and assemble these fragments into the many classes which make-up an object-oriented program.
Early trials indicate that bigCode is an effective method for teaching object-orientation. The requirement to physically organise the code fragments imitates closely the thought processes of a good software developer when developing object-oriented code.
Furthermore, in addition to teaching the principles involved in object-orientation, bigCode is also an extremely useful technique for teaching learners the organisation and structure of individual classes in Java or C# (as well as the organisation of procedural code). The mechanics of organising fragments of code into complete, correct computer programs give the users first-hand practice of this important skill, and as a result they subsequently find it much easier to develop well-structured code on a computer.
Yet, open questions remain. Is bigCode successful only because we have unknowingly predominantly targeted kinesthetic learners? Is bigCode also an effective teaching approach for other forms of learners, such as visual learners? How scalable is bigCode: in its current form can it be used with large class sizes, or outside the classroom?

Advances in single-shot, dry drilling of composite/metal stacks

Carbon fibre reinforced polymers (CFRP) are increasingly being used in the aerospace, automotive and defence industry due to their high specific stiffness and good corrosion resistance. In a modern aircraft, 50-60% of its structure is made up of CFRP material while the remainder is mostly a combination of metallic alloys (typically aluminium or titanium alloys). Mechanical fastening (bolting or riveting) of CFRP and metallic components has thus created a pressing requirement of drilling several thousand holes per aircraft. Drilling of stacks in a single-shot not only saves time, but also ensures proper alignment when fasteners are inserted, achieving tighter geometric tolerances. However, this requirement poses formidable manufacturing challenges due to the fundamental differences in the material properties of CFRP and metals e.g. a drill bit entering into the stack encounters brittle and abrasive CFRP material as well as the plastic behaviour of the metallic alloy, making the drilling process highly non-linear.

Over the past few years substantial efforts have been made in this direction and majority of the research has tried to establish links between how the process parameters (feed, depth of cut, cutting speed), tooling (geometry, material and coating) and the wear of the cutting tool affect the hole quality. Similarly, multitudes of investigations have been conducted to determine the effects of non-traditional drilling methods (orbital, helical and vibration assisted drilling), cutting zone temperatures and efficiency of chip extraction on the hole quality and rate of tool wear during single shot drilling of CFRP/alloy stacks.

In a timely effort, this paper aims at reviewing the manufacturing challenges and barriers faced when drilling CFRP/alloy stacks and to summarise various factors influencing the drilling process while detailing the advances made in this fertile research area of single-shot drilling of stack materials. A survey of the key challenges associated with avoiding workpiece damage and the effect these challenges have on tool design and process optimisation is presented. An in depth critique of suitable hole making methods and their aptness for commercialisation follows. The paper concludes by summarising the future work required to achieve repeatable, high quality single shot drilled holes in CFRP/alloy stacks.

Cigarette smoking and random serum cholesterol levels in a Northern Ireland general practice population of 18- to 20-year-old students and non-students

Coronary heart disease is the commonest cause of death in Northern Ireland, but few data exist on the incidence of risk factors in young adult students and non-students.