Developing mathematics support for first-year engineering students with non-traditional mathematics backgrounds

A maths support system for first-year engineering students with non-traditional entry qualifications has involved students working through practice questions structured to correspond with the maths module which runs in parallel. The setting was informal and there was significant one-to-one assistance. The non-traditional students (who are known to be less well prepared mathematically) were explicitly contacted in the first week of their university studies regarding the maths support and they generally seemed keen to participate. However, attendance at support classes was relatively low, on average, but varied greatly between students. Students appreciated the personal help and having time to ask questions. It seemed that having a small group of friends within the class promoted attendance – perhaps the mutual support or comfort that they all had similar mathematical difficulties was a factor. The classes helped develop confidence. Attendance was hindered by the class being timetabled too soon after the relevant lecture and students were reluctant to come with no work done beforehand. Although students at risk due to their mathematical unpreparedness can easily be identified at an early stage of their university career, encouraging them to partake of the maths support is an ongoing, major problem.

Women into Non-Traditional Sectors: Addressing Gender Segregation in the Northern Ireland Workforce

The horizontal segregation of the workforce along gender lines tends to assign women to lower paid, lower status employment. Consequently, schemes to address segregation have focused on preparing women to enter non‐traditional occupations through training and development processes. This article examines models to encourage women into non‐traditional employment, focusing on the Women into Non‐Traditional Sectors (WINS) project in Belfast, Northern Ireland. However, changing women to suit a hostile work environment assumes women to be the problem, whereas it is the barriers that women face in undertaking non‐traditional jobs that need to be changed. It is concluded, therefore, that while models such as WINS can be successful in assisting women into non‐traditional sectors, change processes to make workplaces more accessible are a more pressing and appropriate approach to de‐segregating the workforce.

Creative Activism: a pedagogical and research tool

Environmental activism has a long history in protest, addressing issues of degradation and segregation that threaten existing ecologies, social and built fabrics. Environmental activism is traditionally understood as a reaction, chiefly by groups of people, against a perceived external threat. In the 60’s and 70’s, an activist stance began to emerge in the work of some artists and architects, who used creative methods such as performances, happenings, temporary spatial interventions etc to convey their political/aesthetic messages. Some of this work engaged directly with communities but predominantly it was the production of one individual working ‘outside’ society. However such actions demonstrated not only the power of the visual in conveying a political message but also the potential of conceptual creative approaches to reveal alternative values and hidden potentials. This marked a shift from activism as protestation towards an activism of reconceptualisation. Recently, activist groups have developed a more politically informed process. Whilst their ‘tools’ may resemble work from the 60’s and 70’s , their methodologies are non-traditional, ’rhizomatic’, pedagogical and fluid; working alongside, rather than against, the established power and funding structures. Such creative processes build new, often unexpected, stakeholder networks; offer neutral spaces in which contentious issues can be faced; and create better understanding of values and identities. They can also lead to permanent improvements and development in the physical fabric. This paper will discuss a pedagogical example of activism in architectural education. The event (www.fourdaysontheoutside.com) is in its fifth year of existence and as such has revealed a value and impulse beyond its learning and teaching value. The paper will discuss how the event contributes to the university’s outreach programme and how its structure acts as a seedbed for potential research projects and partnerships. UK Universities talk extensively about applied research but have few actual strategies by which to generate it. Fourdaysontheoutside offers some potential ways forward.

Conceptualizing a transformative research agenda

Transformative consumer researchers seek to enhance consumer well-being by tackling some of the more difficult and intractable social problems and getting the results into the hands of stakeholders who can apply the research findings. Although traditional research approaches offer a viable path for doing research seeking positive social change, alternative research approaches exist that are uniquely suited to the challenges of Transformative Consumer Research. This article examines the standard research process from the perspective of a transformative research agenda to highlight steps in the process that can be better adapted and suggests innovations inspired from other translational research programs.

Power, Pedagogy and Participation: ethics and pragmatics in research with young people

This article addresses issues of methodology and ethical reflexivity when attempting to investigate the opinions of young people. Drawing specifically on three studies of young people's understandings of citizenship and their views on topical issues, two from England and one from Lebanon, the authors present ways in which the ethical and practical challenges of such research can be met. While acknowledging the power relationship between researchers and informants, they suggest that what they call ‘pedagogical research approaches’ built on a participative methodology can open up a space where both parties benefit. They argue that, when working in schools, teacher educators can take advantage of this status to present themselves simultaneously as insiders and outsiders. The authors have devised what are intended to be non-exploitative research instruments that permit the gathering of useful qualitative data during a short encounter. They illustrate their approach with examples of classroom activities they have developed to provide simultaneously a valid learning experience and usable data.

Good Laboratory Practice for optimization research

Good Laboratory Practice has been a part of non-clinical research for over 40 years. Optimization Research, despite having many papers discussing standards being published over the same period of time, has yet to embrace standards that underpin its research. In this paper we argue the need to adopt standards in optimization research. Building on previous papers, many of which have suggested that the optimization research community should adopt certain standards, we suggest a concrete set of recommendations that the community should adopt. We also discuss how the proposals in this paper could be progressed.

Advances in single-shot, dry drilling of composite/metal stacks

Carbon fibre reinforced polymers (CFRP) are increasingly being used in the aerospace, automotive and defence industry due to their high specific stiffness and good corrosion resistance. In a modern aircraft, 50-60% of its structure is made up of CFRP material while the remainder is mostly a combination of metallic alloys (typically aluminium or titanium alloys). Mechanical fastening (bolting or riveting) of CFRP and metallic components has thus created a pressing requirement of drilling several thousand holes per aircraft. Drilling of stacks in a single-shot not only saves time, but also ensures proper alignment when fasteners are inserted, achieving tighter geometric tolerances. However, this requirement poses formidable manufacturing challenges due to the fundamental differences in the material properties of CFRP and metals e.g. a drill bit entering into the stack encounters brittle and abrasive CFRP material as well as the plastic behaviour of the metallic alloy, making the drilling process highly non-linear.

Over the past few years substantial efforts have been made in this direction and majority of the research has tried to establish links between how the process parameters (feed, depth of cut, cutting speed), tooling (geometry, material and coating) and the wear of the cutting tool affect the hole quality. Similarly, multitudes of investigations have been conducted to determine the effects of non-traditional drilling methods (orbital, helical and vibration assisted drilling), cutting zone temperatures and efficiency of chip extraction on the hole quality and rate of tool wear during single shot drilling of CFRP/alloy stacks.

In a timely effort, this paper aims at reviewing the manufacturing challenges and barriers faced when drilling CFRP/alloy stacks and to summarise various factors influencing the drilling process while detailing the advances made in this fertile research area of single-shot drilling of stack materials. A survey of the key challenges associated with avoiding workpiece damage and the effect these challenges have on tool design and process optimisation is presented. An in depth critique of suitable hole making methods and their aptness for commercialisation follows. The paper concludes by summarising the future work required to achieve repeatable, high quality single shot drilled holes in CFRP/alloy stacks.

Vergilius Redivivus: Studies in Joseph Addison's Latin Poetry

J.W. Binns, Modern Language Review 101.2 (2006), 504-5:
‘This book is an important contribution to the study of Anglo-Latin poetry in the late seventeenth and early eighteenth centuries … ’Haan provides an able and authoritative account …, setting the poems in their contexts, and providing for each a very clear and penetrating analysis which traces the classical well-springs that lie behind much of Addison’s Latin writing, and also calls attention to non-traditional elements’.

Thermomechanical Response of Variable Stiffness Composite Panels

Analysis of non-traditional Variable Stiffness (VS) laminates, obtained by steering the fiber orientation as a spatial function of location, have shown to improve buckling load carrying capacity of flat rectangular panels under axial compressive loads. In some cases the buckling load of simply supported panels doubled compared to the best conventional laminate with straight fibers. Two distinct cases of stiffness variation, one due to fiber orientation variation in the direction of the loading, and the other one perpendicular to the loading direction, were identified as possible contributors to the buckling load improvements. In the first case, the increase was attributed to the favorable distribution of the transverse in-plane stresses over the panel platform. In the second case, a higher degree of improvement was obtained due to the re-distribution of the applied in-plane loads. Experimental results, however, showed substantially higher levels of buckling load improvements compared with theoretical predictions. The additional improvement was determined to be due to residual stresses introduced during curing of the laminates. The present paper provides a simplified thermomechanical analysis of residual stress state of variable stiffness laminates. Systematic parametric analyses of both cases of fiber orientation variations show that, indeed much higher buckling loads could result from the residual stresses present in such laminates.

Improving Patient Safety Through Formal and Informal Learning Networks

This paper explores a novel perspective on patient safety improvements, which draws on
contemporary social network and learning theories. A case study was conducted at a Portuguese
acute university hospital. Data collection followed a staged approach, whereby 46 interviews
were conducted involving 49 respondents from a broad array of departments and professional
backgrounds. This case study highlights the importance of two major interlinked factors in
contributing to patient safety improvements. The first of these is the crucial role of formal and
informal, internal and external social networks. The second is the importance and the possible
advantage of combining formal and informal learning. The analysis suggests that initiatives
rooted in formal learning approaches alone do not necessarily lead to the creation of long-term
grounded internal safety networks, and that patient safety improvements can crucially depend on
bottom-up initiatives of communities of practice and informal learning. Traditional research on
patient safety places a strong emphasis on top-down and managerialist approaches and is often
based on the assumption that „safety? learning is primarily formal and context-independent. This
paper suggests that bottom-up initiatives and a combination of formal and informal learning can
make a major contribute to patient safety improvements.

Interpreting A-level Mathematics grades – as easy as A, B, C?

Many concerns have been expressed that students’ basic mathematical skills have deteriorated during the 1990s and there has been disquiet that current A-level grading does not distinguish adequately between the more able students. This study reports the author’s experiences of teaching maths to large classes of first-year engineering students and aims to enhance understanding of levels of mathematical competence in more recent years. Over the last four years, the classes have consisted of a very large proportion of highly qualified students – about 91% of them had at least grade B in A-level Mathematics. With a small group of students having followed a non-traditional route to university (no A-level maths) and another group having benefitted through taking A-level Further Mathematics at school, the classes have contained a very wide range of mathematical backgrounds. Despite the introductory maths course at university involving mainly repetition of A-level material, students’ marks were spread over a very wide range – for example, A-level Mathematics grade B students have scored across the range 16 – 97%. Analytical integration is the topic which produced the largest variation in performance across the class but, in contrast, the A-level students generally performed well in differentiation. Initial analysis suggests some stability in recent years in the mathematical proficiency of students with a particular A-level Mathematics grade. Allowing choice of applied maths modules as part of the A-level maths qualification increases the variety of students’ mathematical backgrounds and their selection from mechanics, statistics or decision maths is not clear from the final qualification.

Clarifying the acquis humanitaire: a transnational legal perspective on the internalization of humanitarian norms

Although the international obligations and institutional frameworks for disaster response are not yet settled, as evidenced by the International Law Commission’s work on the protection of persons in the event of disasters and the on-going promotion of disaster laws by the Red Cross Movement; the diverse source and nature of such initiatives suggests that the international community is engaged in a process of norm creation, elaboration and interpretation reflecting a desire for legal clarity in humanitarian operations. Situated within the framework of transnational law, this paper argues that an acquis humanitaire, based on the principle of humanity, encapsulates the evolving body of law and practice specifically relating to the protection of persons in times of humanitarian crisis in both armed conflicts and natural or human-made disasters. Reflecting the non-traditional, non-statist, dynamic and normative basis of transnational legal process, as elaborated by Harold Koh, the constant flow of ideas and principles between the national, regional and international spheres provides an analytical framework for the on-going transnational dialogues on the social, political and legal internalization of humanitarian norms. Drawing on the internalization of humanitarian norms within the United Kingdom, this paper concludes that as the international community examines the codification of a universal legal framework for the protection of persons in the event of disasters it is necessary to understand the transnational process of interpretation and internalization of humanitarian norms, and how this may vary across different regions and countries.

Time Efficient Assessment and Feedback Methods for Large Computer-Aided-Design Cohorts

Timely and individualized feedback on coursework is desirable from a student perspective as it facilitates formative development and encourages reflective learning practice. Faculty however are faced with a significant and potentially time consuming challenge when teaching larger cohorts if they are to provide feedback which is timely, individualized and detailed. Additionally, for subjects which assess non-traditional submissions, such as Computer-Aided-Design (CAD), the methods for assessment and feedback tend not to be so well developed or optimized. Issues can also arise over the consistency of the feedback provided. Evaluations of Computer-Assisted feedback in other disciplines (Denton et al, 2008), (Croft et al, 2001) have shown students prefer this method of feedback to traditional “red pen” marking and also that such methods can be more time efficient for faculty.
Herein, approaches are described which make use of technology and additional software tools to speed up, simplify and automate assessment and the provision of feedback for large cohorts of first and second year engineering students studying modules where CAD files are submitted electronically. A range of automated methods are described and compared with more “manual” approaches. Specifically one method uses an application programming interface (API) to interrogate SolidWorks models and extract information into an Excel spreadsheet, which is then used to automatically send feedback emails. Another method describes the use of audio recordings made during model interrogation which reduces the amount of time while increasing the level of detail provided as feedback.
Limitations found with these methods and problems encountered are discussed along with a quantified assessment of time saving efficiencies made.