CHARACTERIZATION OF SURFACE-PLASMONS ON METAL-OXIDE-SEMICONDUCTOR STRUCTURES

Using the Otto (prism-air gap-sample) configuration p-polarized light of wavelength 632.8 nm has been coupled with greater than 80% efficiency to surface plasmons on the aluminium electrode of silicon-silicon dioxide-aluminium structures. The results show that if the average power per unit area dissipated on the metal film exceeds approximately 1 mW mm-2, then the coupling gap and thus the characteristics of the surface plasmon resonance are noticeably altered. In modelling the optical response of such systems the inclusion of both a non-uniform air coupling gap and a thin cermet layer at the aluminium surface may be necessary.

Effects of particle/matrix interface and strengthening mechanisms on the mechanical properties of metal matrix composites

A randomly distributed multi-particle model considering the effects of particle/matrix interface and strengthening mechanisms introduced by the particles has been constructed. Particle shape, distribution, volume fraction and the particles/matrix interface due to the factors including element diffusion were considered in the model. The effects of strengthening mechanisms, caused by the introduction of particles on the mechanical properties of the composites, including grain refinement strengthening, dislocation strengthening and Orowan strengthening, are incorporated. In the model, the particles are assumed to have spheroidal shape, with uniform distribution of the centre, long axis length and inclination angle. The axis ratio follows a right half-normal distribution. Using Monte Carlo method, the location and shape parameters of the spheroids are randomly selected. The particle volume fraction is calculated using the area ratio of the spheroids. Then, the effects of particle/matrix interface and strengthening mechanism on the distribution of Mises stress and equivalent strain and the flow behaviour for the composites are discussed.

Environmental forensic investigations: The potential use of a novel heavy metal sensor and novel taggants

This chapter presents a novel hand-held instrument capable of real-time in situ detection and identification of heavy metals, along with the potential use of novel taggants in environmental forensic investigations. The proposed system provides the facilities found in a traditional laboratory-based instrument but in a hand held design, without the need for an associated computer. The electrochemical instrument uses anodic stripping voltammetry, which is a precise and sensitive analytical method with excellent limits of detection. The sensors comprise a small disposable plastic strip of screen-printed electrodes rather than the more common glassy carbon disc and gold electrodes. The system is designed for use by a surveyor on site, allowing them to locate hotspots, thus avoiding the expense and time delay of prior laboratory analysis. This is particularly important in environmental forensic analysis when a site may have been released back to the owner and samples could be compromised on return visits. The system can be used in a variety of situations in environmental assessments, the data acquired from which provide a metals fingerprint suitable for input to a database. The proposed novel taggant tracers, based on narrow-band atomic fluorescence, are under development for potential deployment as forensic environmental tracers. The use of discrete fluorescent species in an environmentally stable host has been investigated to replace existing toxic, broadband molecular dye tracers. The narrow band emission signals offer the potential for tracing a large number of signals in the same environment. This will give increased data accuracy and allow multiple source environmental monitoring of environmental parameters.

‘All illness is personal to that individual’: a qualitative study of patients’ perspectives on treatment adherence in bronchiectasis

Background: Adherence to treatment is low in bronchiectasis and is associated with poorer health outcomes. Factors affecting adherence decisions have not been explored in patients with bronchiectasis. 

Objective: We aimed to explore patients' perspectives on adherence, factors affecting adherence decision making and to develop a conceptual model explaining this decision-making process in adults with bronchiectasis. 

Methods: Adults with bronchiectasis participated in one-to-one semi-structured interviews. Interviews were audio-recorded, transcribed verbatim and analysed independently by two researchers using thematic analysis. Data from core themes were extracted, categorized into factors affecting adherence decision making and used to develop the conceptual model. 

Results: Participants' beliefs about treatment, the practical aspects of managing treatment, their trust in health-care professionals and acceptance of disease and treatment were important aspects of treatment adherence. The conceptual model demonstrated that adherence decisions were influenced by participants' individual balance of barriers and motivating factors (treatment-related, disease-related, health-care-related, personal and social factors). 

Conclusion: Adherence decision-making in bronchiectasis is complex, but there is the potential to enhance adherence by understanding patients' specific barriers and motivators to adherence and using this to tailor adherence strategies to individual patients and treatments. © 2014 John Wiley & Sons Ltd.

Oxygen Reduction Reaction on Metal-Terminated MnCr2O4 Nano-octahedron Catalyzing MnS Dissolution in an Austenitic Stainless Steel

To understand pitting corrosion in stainless steel is very important, and a recent work showed that the MnS dissolution catalyzed by MnCr2O4{111} is a starting point of pit g. This demonstrates the need to understand the oxygen reduction reaction (ORR) on MnCr2O4{111}, which is the other half-reaction to complete pitting corrosion. In this study, the adsorption behaviors of all oxygen-containing species on MnCr2O4{111}, which has several possible terminations, are explored via density functional theory calculations. It is found that O-2 adsorbs on MnCr2O4{111) surfaces very strongly. Many possible reactions are investigated and the favored reaction mechanism of ORR is determined. The interactions between O-2 and H2O on the two metal-terminated MriCr(2)O(4){111} are found to be different according to the atomic configurations of the two surfaces. All the calculated results suggest that ORR can readily occur on the MnCr2O4{111} surfaces.

A DFT study of the transition metal promotion effect on ethylene chemisorption on Co(0001)

Transition metals are often introduced to a catalyst as promoters to improve catalytic performance. In this work, we study the promotion effect of transition metals on Co, the preferred catalytic metal for Fischer-Tropsch synthesis because of its good compromise of activity, selectivity and stability, for ethylene chemisorption using density functional theory (DFT) calculations, aiming to provide some insight into improving the alpha-olefin selectivity. In order to obtain the general trend of influence on ethylene chemisorption, twelve transition metals (Zr, Mn, Re, Ru, Rh, It, Ni, Pd, Pt, Cu, Ag and Au) are calculated. We find that the late transition metals (e.g. Pd and Cu) can decrease ethylene chemisorption energy. These results suggest that the addition of the late transition metals may improve alpha-olefin selectivity. Electronic structure analyses (both charge density distributions and density of states) are also performed and the understanding of calculated results is presented. (C) 2009 Elsevier B.V. All rights reserved.

ORBITAL MIXING IN CO CHEMISORPTION ON TRANSITION-METAL SURFACES

The chemisorption of CO on metal surfaces is widely accepted as a model for understanding chemical bonding between molecules and solid surfaces, but is nevertheless still a controversial subject. Ab initio total energy calculations using density functional theory with gradient corrections for CO chemisorption on an extended Pd{110} slab yield good agreement with experimental adsorption energies. Examination of the spatial distribution of individual Bloch states demonstrates that the conventional model for CO chemisorption involving charge donation from CO 5 sigma states to metal states and back-donation from metal states into CO 2 pi states is too simplistic, but the computational results provide direct insight into the chemical bonding within the framework of orbital mixing (or hybridisation). The results provide a sound basis for understanding the bonding between molecules and metal surfaces.

Genome-wide gene pathway analysis of psychotic illness symptom dimensions based on a new schizophrenia-specific model of the OPCRIT

Empirically derived phenotypic measurements have the potential to enhance gene-finding efforts in schizophrenia. Previous research based on factor analyses of symptoms has typically included schizoaffective cases. Deriving factor loadings from analysis of only narrowly defined schizophrenia cases could yield more sensitive factor scores for gene pathway and gene ontology analyses. Using an Irish family sample, this study 1) factor analyzed clinician-rated Operational Criteria Checklist items in cases with schizophrenia only, 2) scored the full sample based on these factor loadings, and 3) implemented genome-wide association, gene-based, and gene-pathway analysis of these SCZ-based symptom factors (final N= 507). Three factors emerged from the analysis of the schizophrenia cases: a manic, a depressive, and a positive symptom factor. In gene-based analyses of these factors, multiple genes had q<. 0.01. Of particular interest are findings for PTPRG and WBP1L, both of which were previously implicated by the Psychiatric Genomics Consortium study of SCZ; results from this study suggest that variants in these genes might also act as modifiers of SCZ symptoms. Gene pathway analyses of the first factor indicated over-representation of glutamatergic transmission, GABA-A receptor, and cyclic GMP pathways. Results suggest that these pathways may have differential influence on affective symptom presentation in schizophrenia.

Switching ‘on’ the Luminescence of One Metal Ion with Another: Selectivity Characteristics with Respect to the Emitting and Triggering Metal

Complexes 1a·EuIII and 1b·EuIII, but not 1a·TbIII and 1b·TbIII, display strong ‘off–on’ switching of delayed luminescence with alkali cations; the switching efficiency of 1b·EuIII is stronger with K+ rather than Na+.

Toxic interactions of metal ions (Cd2+, Pb2+, Zn2+ and Sb3- on in vitro biomass production of ectomycorrhizal fungi

A number of ectomycorrhizal (ECM) fungi, from sites uncontaminated by toxic metals, were investigated to determine their sensitivity to Cd^2-, Pb²⁺, Zn²⁺ and Sb^3-, measured as an inhibition of fungal biomass production. Isolates were grown in liquid media amended with the metals, individually (over a range of concentrations) and in combination (at single concentrations) to determine any significant interactions between the metals. Significant interspecific variation in sensitivity to Cd²⁺ and Zn²⁺ was recorded, while Pb²⁺ and Sb^3- individually had little effect. The presence of Pb²⁺ and Sb^3- in the media did however, ameliorate Cd²⁺ and Zn²⁺ toxicity in some circumstances. Interactions between Cd²⁺ and Zn²⁺ were investigated further over a range of concentrations. Zn²⁺ was found to significantly ameliorate the toxicity of Cd²⁺ to three of the four isolates tested. The influence of Zn²⁺ varied between ECM species and with the concentrations of metals tested.

Electrochemical promotion of a metal catalyst supported on a mixed-ionic conductor

It has been found that the catalytic activity and selectivity of a metal film deposited on a solid electrolyte could be enhanced dramatically and in a reversible way by applying an electrical current or potential between the metal catalyst and the counter electrode (also deposited on the electrolyte). This phenomenon is know as NEMCA [S. Bebelis, C.G. Vayenas, Journal of Catalysis, 118 (1989) 125-146.] or electrochemical promotion (EP) [J. Prichard, Nature, 343 (1990) 592.] of catalysis. Yttria-doped barium zirconate, BaZr_0.9Y_0.1O_{3 - α} (BZY), a known proton conductor, has been used in this study. It has been reported that proton conducting perovskites can, under the appropriate conditions, act also as oxide ion conductors. In mixed conducting systems the mechanism of conduction depends upon the gas atmosphere that to which the material is exposed. Therefore, the use of a mixed ionic (oxide ion and proton) conducting membrane as a support for a platinum catalyst may facilitate the tuning of the promotional behaviour of the catalyst by allowing the control of the conduction mechanism of the electrolyte. The conductivity of BZY under different atmospheres was measured and the presence of oxide ion conduction under the appropriate conditions was confirmed. Moreover, kinetic experiments on ethylene oxidation corroborated the findings from the conductivity measurements showing that the use of a mixed ionic conductor allows for the tuning of the reaction rate. © 2006 Elsevier B.V. All rights reserved.

The impact of organisational factors and government policy on psychiatric nurses family focused practice with parents who have mental illness, their dependent children and families in Ireland

Government policy and organizational factors influence family focused practice in adult mental health services. However, how these aspects shape psychiatric nurses’ practice with parents who have mental illness, their dependent children and families is less well understood. Drawing on the findings of a qualitative study, this article explores the way in which Irish policy and organizational factors might influence psychiatric nurses’ family focused practice, and whether (and how) family focused practice might be further promoted. A purposive sample of 14 psychiatric nurses from eight mental health services completed semi-structured interviews in 2013. The analysis was inductive and presented as thematic networks. Both groups described how policies and organizational culture enabled and/or hindered family focused practice, with differences between community and acute participants seen. The need to develop national and international policies along with practices to embed information and support regarding parenting into ongoing care is implicated in this study.