Expanded iron uta spectra - Probing the thermal stability limits in AGN clouds

The Fe unresolved transition arrays (UTAs) produce prominent features in the 15-17 Å wavelength range in the spectra of active galactic nuclei (AGNs). Here, we present new calculations of the energies and oscillator strengths of inner-shell lines from Fe XIV, Fe XV, and Fe XVI. These are crucial ions since they are dominant at inflection points in the gas thermal stability curve, and UTA excitation followed by autoionization is an important ionization mechanism for these species. We incorporate these, and data reported in previous papers, into the plasma simulation code Cloudy. This updated physics is subsequently employed to reconsider the thermally stable phases in absorbing media in AGNs. We show how the absorption profile of the Fe XIV UTA depends on density, due to the changing populations of levels within the ground configuration. © 2013. The American Astronomical Society. All rights reserved.

Photocatalytic activity indicator inks for the probing a wide range of surfaces

Three photocatalyst inks based on the redox dyes, Resazurin (Rz), Basic Blue 66 (BB66) and Acid Violet 7 (AV7), are used to assess the photocatalytic activities of a variety of different materials, such as commercial paint, tiles and glass and laboratory made samples of sol–gel coated glass and paint, which collectively exhibit a wide range of activities that cannot currently be probed by any one of the existing ISO tests. Unlike the ISO tests, the ink tests are fast (typically <10 min), simple to employ and inexpensive. Previous work indicates that the Rz ink test at least correlates linearly with other photocatalytic tests such as the photomineralisation of stearic acid. The average time to bleach 90% of the key RGB colour component of the ink, red for Rz and BB66 inks and green for AV7 ink, is determined, ttb(90), for eight samples of each of the different materials tested. Five laboratories conducted the tests and the results revealed an average repeatability and reproducibility of: ca. 11% and ca 21%, respectively, which compare well with those reported for the current ISO tests. Additional work on commercial self-cleaning glass using an Rz ink showed that the change in the red component of the RGB image of the ink correlated linearly with that of the change of absorbance at 608 nm, as measured using UV/vis spectroscopy, and the change in the a* component of the Lab colour analysis of the ink, as measured using diffuse reflectance spectroscopy. As a consequence, all three methods generate the same ttb(90). The advantages of the RGB digital image analysis method are discussed briefly.

Characterization of x-ray lens for use in probing high energy density states of matter

By using polycapillary lenses to focus laser-produced x-ray sources to high intensities, an improvement in signal-to-noise ratio can be achieved. Here the He-alpha line emission produced by driving a titanium backlighter target is focused by a polycapillary lens and the output characterized. The x-ray spot is measured to have a peak intensity of 4.5 x 10(7) photons, with a total photon count of 8.8 x 10(8) in 0.13 +/- 0.01 mm(2). This setup is equivalent to placing the backlighter target 3 mm from the sample with a 600 mu m diameter pinhole. The polycapillary lens enables the placement of the backlighter target at a much larger distance from the sample to be studied and therefore has the ability to greatly improve the signal-to-noise ratio on detectors. We demonstrate this with two simple diffraction experiments using pyrolytic graphite and polycrystalline aluminium.

How Video Lecture Capture affects Student Engagement in a University Computer Programming Course: Attendance, Video Viewing Behaviours and Student Attitudes

Introduction
The use of video capture of lectures in Higher Education is not a recent occurrence with web based learning technologies including digital recording of live lectures becoming increasing commonly offered by universities throughout the world (Holliman and Scanlon, 2004). However in the past decade the increase in technical infrastructural provision including the availability of high speed broadband has increased the potential and use of videoed lecture capture. This had led to a variety of lecture capture formats including pod casting, live streaming or delayed broadcasting of whole or part of lectures.
Additionally in the past five years there has been a significant increase in the popularity of online learning, specifically via Massive Open Online Courses (MOOCs) (Vardi, 2014). One of the key aspects of MOOCs is the simulated recording of lecture like activities. There has been and continues to be much debate on the consequences of the popularity of MOOCs, especially in relation to its potential uses within established University programmes.
There have been a number of studies dedicated to the effects of videoing lectures.
The clustered areas of research in video lecture capture have the following main themes:
• Staff perceptions including attendance, performance of students and staff workload
• Reinforcement versus replacement of lectures
• Improved flexibility of learning
• Facilitating engaging and effective learning experiences
• Student usage, perception and satisfaction
• Facilitating students learning at their own pace
Most of the body of the research has concentrated on student and faculty perceptions, including academic achievement, student attendance and engagement (Johnston et al, 2012).
Generally the research has been positive in review of the benefits of lecture capture for both students and faculty. This perception coupled with technical infrastructure improvements and student demand may well mean that the use of video lecture capture will continue to increase in frequency in the next number of years in tertiary education. However there is a relatively limited amount of research in the effects of lecture capture specifically in the area of computer programming with Watkins 2007 being one of few studies . Video delivery of programming solutions is particularly useful for enabling a lecturer to illustrate the complex decision making processes and iterative nature of the actual code development process (Watkins et al 2007). As such research in this area would appear to be particularly appropriate to help inform debate and future decisions made by policy makers.
Research questions and objectives
The purpose of the research was to investigate how a series of lecture captures (in which the audio of lectures and video of on-screen projected content were recorded) impacted on the delivery and learning of a programme of study in an MSc Software Development course in Queen’s University, Belfast, Northern Ireland. The MSc is conversion programme, intended to take graduates from non-computing primary degrees and upskill them in this area. The research specifically targeted the Java programming module within the course. It also analyses and reports on the empirical data from attendances and various video viewing statistics. In addition, qualitative data was collected from staff and student feedback to help contextualise the quantitative results.
Methodology, Methods and Research Instruments Used
The study was conducted with a cohort of 85 post graduate students taking a compulsory module in Java programming in the first semester of a one year MSc in Software Development. A pre-course survey of students found that 58% preferred to have available videos of “key moments” of lectures rather than whole lectures. A large scale study carried out by Guo concluded that “shorter videos are much more engaging” (Guo 2013). Of concern was the potential for low audience retention for videos of whole lectures.
The lecturers recorded snippets of the lecture directly before or after the actual physical delivery of the lecture, in a quiet environment and then upload the video directly to a closed YouTube channel. These snippets generally concentrated on significant parts of the theory followed by theory related coding demonstration activities and were faithful in replication of the face to face lecture. Generally each lecture was supported by two to three videos of durations ranging from 20 – 30 minutes.
Attendance
The MSc programme has several attendance based modules of which Java Programming was one element. In order to assess the consequence on attendance for the Programming module a control was established. The control used was a Database module which is taken by the same students and runs in the same semester.
Access engagement
The videos were hosted on a closed YouTube channel made available only to the students in the class. The channel had enabled analytics which reported on the following areas for all and for each individual video; views (hits), audience retention, viewing devices / operating systems used and minutes watched.
Student attitudes
Three surveys were taken in regard to investigating student attitudes towards the videoing of lectures. The first was before the start of the programming module, then at the mid-point and subsequently after the programme was complete.
The questions in the first survey were targeted at eliciting student attitudes towards lecture capture before they had experienced it in the programme. The midpoint survey gathered data in relation to how the students were individually using the system up to that point. This included feedback on how many videos an individual had watched, viewing duration, primary reasons for watching and the result on attendance, in addition to probing for comments or suggestions. The final survey on course completion contained questions similar to the midpoint survey but in summative view of the whole video programme.
Conclusions and Outcomes
The study confirmed findings of other such investigations illustrating that there is little or no effect on attendance at lectures. The use of the videos appears to help promote continual learning but they are particularly accessed by students at assessment periods. Students respond positively to the ability to access lectures digitally, as a means of reinforcing learning experiences rather than replacing them. Feedback from students was overwhelmingly positive indicating that the videos benefited their learning. Also there are significant benefits to part recording of lectures rather than recording whole lectures. The behaviour viewing trends analytics suggest that despite the increase in the popularity of online learning via MOOCs and the promotion of video learning on mobile devices in fact in this study the vast majority of students accessed the online videos at home on laptops or desktops However, in part, this is likely due to the nature of the taught subject, that being programming.
The research involved prerecording the lecture in smaller timed units and then uploading for distribution to counteract existing quality issues with recording entire live lectures. However the advancement and consequential improvement in quality of in situ lecture capture equipment may well help negate the need to record elsewhere. The research has also highlighted an area of potentially very significant use for performance analysis and improvement that could have major implications for the quality of teaching. A study of the analytics of the viewings of the videos could well provide a quick response formative feedback mechanism for the lecturer. If a videoed lecture either recorded live or later is a true reflection of the face to face lecture an analysis of the viewing patterns for the video may well reveal trends that correspond with the live delivery.

Performance and Fault Tolerance of Preconditioned Iterative Solvers on Low-Power ARM Architectures

As the complexity of computing systems grows, reliability and energy are two crucial challenges asking for holistic solutions. In this paper, we investigate the interplay among concurrency, power dissipation, energy consumption and voltage-frequency scaling for a key numerical kernel for the solution of sparse linear systems. Concretely, we leverage a task-parallel implementation of the Conjugate Gradient method, equipped with an state-of-the-art pre-conditioner embedded in the ILUPACK software, and target a low-power multi core processor from ARM.In addition, we perform a theoretical analysis on the impact of a technique like Near Threshold Voltage Computing (NTVC) from the points of view of increased hardware concurrency and error rate.

An iterative longest matching segment approach to speech enhancement with additive noise and channel distortion

This paper presents a new approach to speech enhancement from single-channel measurements involving both noise and channel distortion (i.e., convolutional noise), and demonstrates its applications for robust speech recognition and for improving noisy speech quality. The approach is based on finding longest matching segments (LMS) from a corpus of clean, wideband speech. The approach adds three novel developments to our previous LMS research. First, we address the problem of channel distortion as well as additive noise. Second, we present an improved method for modeling noise for speech estimation. Third, we present an iterative algorithm which updates the noise and channel estimates of the corpus data model. In experiments using speech recognition as a test with the Aurora 4 database, the use of our enhancement approach as a preprocessor for feature extraction significantly improved the performance of a baseline recognition system. In another comparison against conventional enhancement algorithms, both the PESQ and the segmental SNR ratings of the LMS algorithm were superior to the other methods for noisy speech enhancement.

Accurate image capturing control of bottle caps based on iterative learning control and Kalman filtering

This paper investigates camera control for capturing bottle cap target images in the fault-detection system of an industrial production line. The main purpose is to identify the targeted bottle caps accurately in real time from the images. This is achieved by combining iterative learning control and Kalman filtering to reduce the effect of various disturbances introduced into the detection system. A mathematical model, together with a physical simulation platform is established based on the actual production requirements, and the convergence properties of the model are analyzed. It is shown that the proposed method enables accurate real-time control of the camera, and further, the gain range of the learning rule is also obtained. The numerical simulation and experimental results confirm that the proposed method can not only reduce the effect of repeatable disturbances but also non-repeatable ones.

Probing The effects of Experimental Conditions on the Character of Drug-Polymer Phase Diagrams Constructed Using Flory-Huggins Theory

Purpose: Amorphous drug-polymer solid dispersions have been found to result in improved drug dissolution rates when compared to their crystalline counterparts. However, when the drug exists in the amorphous form it will possess a higher Gibb’s free energy than its associated crystalline state and can recrystallize. Drug-polymer phase diagrams constructed through the application of the Flory Huggins (F-H) theory contain a wealth of information regarding thermodynamic and kinetic stability of the amorphous drug-polymer system. This study was aimed to evaluate the effects of various experimental conditions on the solubility and miscibility detections of drug-polymer binary system. Methods: Felodipine (FD)-Polyvinylpyrrolidone (PVP) K15 (PVPK15) and FD-Polyvinylpyrrolidone/vinyl acetate (PVP/VA64) were the selected systems for this research. Physical mixtures with different drug loadings were mixed and ball milled. These samples were then processed using Differential Scanning Calorimetry (DSC) and measurements of melting point (Tend) and glass transition (Tg) were detected using heating rates of 0.5, 1.0 and 5.0°C/min. Results: The melting point depression data was then used to calculate the F-H interaction parameter (χ) and extrapolated to lower temperatures to complete the liquid–solid transition curves. The theoretical binodal and spinodal curves were also constructed which were used to identify regions within the phase diagram. The effects of polymer selection, DSC heating rate, time above parent polymer Tg and polymer molecular weight were investigated by identifying amorphous drug miscibility limits at pharmaceutically relevant temperatures. Conclusion: The potential implications of these findings when applied to a non-ambient processing method such as Hot Melt Extrusion (HME) are also discussed.

Improving the robustness of the iterative solver in state-space modelling of guitar distortion circuitry

Iterative solvers are required for the discrete-time simulation of nonlinear behaviour in analogue distortion circuits. Unfortunately,these methods are often computationally too expensive for realtime simulation. Two methods are presented which attempt to reduce the expense of iterative solvers. This is achieved by applying information that is derived from the specific form of the non linearity.The approach is first explained through the modelling of an asymmetrical diode clipper, and further exemplified by application to the Dallas Rangemaster Treble Booster guitar pedal, which provides an initial perspective of the performance on systems with multiple nonlinearities.

Local probing of ferroelectric and ferroelastic switching through stress-mediated piezoelectric spectroscopy

Strain effects have a significant role in mediating classic ferroelectric behavior such as polarization switching and domain wall dynamics. These effects are of critical relevance if the ferroelectric order parameter is coupled to strain and is therefore, also ferroelastic. Here, switching spectroscopy piezoresponse force microscopy (SS-PFM) is combined with control of applied tip pressure to exert direct control over the ferroelastic and ferroelectric switching events, a modality otherwise unattainable in traditional PFM. As a proof of concept, stress-mediated SS-PFM is applied toward the study of polarization switching events in a lead zirconate titanate thin film, with a composition near the morphotropic phase boundary with co-existing rhombohedral and tetragonal phases. Under increasing applied pressure, shape modification of local hysteresis loops is observed, consistent with a reduction in the ferroelastic domain variants under increased pressure. These experimental results are further validated by phase field simulations. The technique can be expanded to explore more complex electromechanical responses under applied local pressure, such as probing ferroelectric and ferroelastic piezoelectric nonlinearity as a function of applied pressure, and electro-chemo-mechanical response through electrochemical strain microscopy.

Probing a 3,4'-bis-guanidinium diaryl derivative as an allosteric inhibitor of the Ras pathway

Mutations in the Ras-pathway occur in 40–45% of colorectal cancer patients and these are refractory to treatment with anti-EGFR-targeted therapies. With this in mind, we have studied novel guanidinium- based compounds with demonstrated ability to inhibit protein kinases. We have performed docking stud- ies with several proteins involved in the Ras-pathway and evaluated 3,40-bis-guanidinium derivatives as inhibitors of B-Raf. Compound 3, the most potent in this series, demonstrated strong cytotoxicity in WTB-Raf colorectal cancer cells and also cells with V600EB-Raf mutations. Cell death was induced by apop- tosis, detected by cleavage of PARP. Compound 3 also potently inhibited ERK1/2 signalling, inhibited EGFR activation, as well as Src, STAT3 and AKT phosphorylation. Mechanistically, compound 3 did not inhibit ATP binding to B-Raf, but direct assay of B-Raf activity was inhibited in vitro. Summarizing, we have identified a novel B-Raf type-III inhibitor that exhibits potent cellular cytotoxicity

An Ultrasonic Relaxation Study of 1-Alkyl-3-Methylmidazolium-Based Room Temperature Ionic Liquids: Probing the Role of Alkyl Chain Length in the Cation

Ultrasound absorption spectra of four 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide were determined as a function of the alkyl chain length on the cation from 1-propyl- to 1-hexyl- from 293.15 to 323.15 K at ambient pressure. Herein, the ultrasound absorption measurements were carried out using a standard pulse technique within a frequency range from 10 to 300 MHz. Additionally the speed of sound, density and viscosity have been measured. The presence of strong dissipative processes during the ultrasound wave propagation was found experimentally, i.e. relaxation processes in the megahertz range were observed for all compounds over the whole temperature range. The relaxation spectra (both relaxation amplitude and relaxation frequency) were shown to be dependent on the alkyl side chain length of the 1-alkyl-3-methylimidazolium ring. In most cases, a single Debye model described the absorption spectra very well. However, a comparison of the determined spectra with the spectra of a few other imidazolium-based ionic liquids reported in the literature (in part recalculated in this work) shows that the complexity of the spectra increases rapidly with the elongation of the alkyl chain length on the cation. This complexity indicates that both the volume viscosity and the shear viscosity are involved in relaxation processes even in relatively low frequency ranges. As a consequence, the sound velocity dispersion is present at relatively low megahertz frequencies.

Probing confinement resonances by photoionizing Xe inside a C60+ molecular cage

Double photoionization accompanied by loss of n C atoms (n=0, 2, 4, 6) was investigated by merging beams of Xe@C60+ ions and synchrotron radiation and measuring the yields of product ions. The giant 4d dipole resonance of the caged Xe atom has a prominent signature in the cross section for these product channels, which together account for 6.2 ± 1.4 of the total Xe 4d oscillator strength of 10. Compared to that for a free Xe atom, the oscillator strength is redistributed in photon energy due to multipath interference of outgoing Xe 4d photoelectron waves that may be transmitted or reflected by the spherical C60+ molecular cage, yielding so-called confinement resonances. The data are compared with an earlier measurement and with theoretical predictions for this single-molecule photoelectron interferometer system. Relativistic R-matrix calculations for the Xe atom in a spherical potential shell representing the fullerene cage show the sensitivity of the interference pattern to the molecular geometry. © 2013 American Physical Society.