Octavius 4D characterization for flattened and flattening filter free rotational deliveries

Purpose: In this study the Octavius detector 729 ionization chamber (IC) array with the Octavius 4D phantom was characterized for flattening filter (FF) and flattening filter free (FFF) static and rotational beams. The device was assessed for verification with FF and FFF RapidArc treatment plans.

Methods: The response of the detectors to field size, dose linearity, and dose rate were assessed for 6 MV FF beams and also 6 and 10 MV FFF beams. Dosimetric and mechanical accuracy of the detector array within the Octavius 4D rotational phantom was evaluated against measurements made using semiflex and pinpoint ionization chambers, and radiochromic film. Verification FF and FFF RapidArc plans were assessed using a gamma function with 3%/3 mm tolerances and 2%/2 mm tolerances and further analysis of these plans was undertaken using film and a second detector array with higher spatial resolution.

Results: A warm-up dose of >6 Gy was required for detector stability. Dose-rate measurements were stable across a range from 0.26 to 15 Gy/min and dose response was linear, although the device overestimated small doses compared with pinpoint ionization chamber measurements. Output factors agreed with ionization chamber measurements to within 0.6% for square fields of side between 3 and 25 cm and within 1.2% for 2 x 2 cm(2) fields. The Octavius 4D phantom was found to be consistent with measurements made with radiochromic film, where the gantry angle was found to be within 0.4. of that expected during rotational deliveries. RapidArc FF and FFF beams were found to have an accuracy of >97.9% and >90% of pixels passing 3%/3 mm and 2%/2 mm, respectively. Detector spatial resolution was observed to be a factor in determining the accurate delivery of each plan, particularly at steep dose gradients. This was confirmed using data from a second detector array with higher spatial resolution and with radiochromic film.

Conclusions: The Octavius 4D phantom with associated Octavius detector 729 ionization chamber array is a dosimetrically and mechanically stable device for pretreatment verification of FF and FFF RapidArc treatments. Further improvements may be possible through use of a detector array with higher spatial resolution (detector size and/or detector spacing). (C) 2013 American Association of Physicists in Medicine.

Antioxidant Activity of Sesame (Seasamum indicum L.) Cake Extract for the Stabilization of Olein Based Butter

This study investigated the effect of ethanolic sesame cake extract on oxidative stabilization of olein based butter. Fractionation of cream was performed by the dry fractionation technique at 10 °C, ethanolic sesame cake extract (SCE) was incorporated into olein butter at three different concentrations; 50, 100, 150 ppm (T1, T2, T3) and compared with a control. The total phenolic content of SCE was 1.72 (mg gallic acid equivalent g−1 dry weight). The HPLC characterization of ethanolic sesame cake revealed the presence of antioxidant substances viz. sesamol, sesamin and sesamolin in higher extents. The DPPH free radical scavenging activity of SCE was 83 % as compared to 64 and 75 % in BHA and BHT. Fractionation of milk fat at 10 °C significantly (p < 0.05) influenced the fatty acid profile of olein and stearin fractions from the parent milk fat. Concentration of oleic acid and linoleic acid in olein fraction was 29.62 and 33.46 % greater than the parent milk fat. The loss of C18:1 in 90 days stored control and T3 was 24.37 and 3.58 %, respectively, 58 % C18:2 was broken down into oxidation products over 8.55 % loss in T3. The peroxide value of control, T1, T2, BHT and T3 in the Schaal oven test was 8.59, 8.12, 5.34, 4.52 and 2.49 (mequiv O2/kg). The peroxide value and anisidine value of 3 months stored control and T3 were 1.21, 0.42 (mequiv O2/kg) and 27.25, 13.25, respectively. The concentration of conjugated dienes in T3 was substantially less than the control. The induction period of T3 was considerably higher than BHT with no difference in sensory characteristics (p > 0.05). Ethanolic SCE can be used for the long-term preservation of olein butter, with acceptable sensory characteristics.

Using entropy based mean shift filter and modified watershed transform for grain segmentation

Life science research aims to continuously improve the quality and standard of human life. One of the major challenges in this area is to maintain food safety and security. A number of image processing techniques have been used to investigate the quality of food products. In this paper,we propose a new algorithm to effectively segment connected grains so that each of them can be inspected in a later processing stage. One family of the existing segmentation methods is based on the idea of watersheding, and it has shown promising results in practice.However,due to the over-segmentation issue,this technique has experienced poor performance in various applications,such as inhomogeneous background and connected targets. To solve this problem,we present a combination of two classical techniques to handle this issue.In the first step,a mean shift filter is used to eliminate the inhomogeneous background, where entropy is used to be a converging criterion. Secondly,a color gradient algorithm is used in order to detect the most significant edges, and a marked watershed transform is applied to segment cluttered objects out of the previous processing stages. The proposed framework is capable of compromising among execution time, usability, efficiency and segmentation outcome in analyzing ring die pellets. The experimental results demonstrate that the proposed approach is effectiveness and robust.

An optimal algorithm for low power multiplierless FIR filter design using chebychev criterion

In this paper, we propose a novel finite impulse response (FIR) filter design methodology that reduces the number of operations with a motivation to reduce power consumption and enhance performance. The novelty of our approach lies in the generation of filter coefficients such that they conform to a given low-power architecture, while meeting the given filter specifications. The proposed algorithm is formulated as a mixed integer linear programming problem that minimizes chebychev error and synthesizes coefficients which consist of pre-specified alphabets. The new modified coefficients can be used for low-power VLSI implementation of vector scaling operations such as FIR filtering using computation sharing multiplier (CSHM). Simulations in 0.25um technology show that CSHM FIR filter architecture can result in 55% power and 34% speed improvement compared to carry save multiplier (CSAM) based filters.

On Cherry-Picking ... or Trying to Have One’s Cake and Eating It: past principles and practice in the pursuit of an alternative to [full] EU membership

With the United Kingdom’s continued membership of the EU being increasingly questioned and the Prime Minister, David Cameron, committed to 're-negotiate’ the terms of membership, consideration is being given to what forms alternatives to [full] membership may take. While much current discussion focuses on the advantages and disadvantages of particular existing arrangements (e.g. European Economic Area, Swiss bilateralism), this paper examines the broader principles and practices that have to date underpinned – and undermined – EU’s attempts to develop alternatives to [full] EU membership. Drawing on an analysis of the evolution of association as an alternative to membership, the paper assesses the principled, practical and political limitations the EU faces – and imposes on itself – in offering an acceptable balance of rights and obligations to states not wishing to assume the mantle of full membership. In its assessment the paper considers various proposed models of affiliate and associate membership. It also situates consideration of the UK case in the broader context of the EU’s relations with other European non-member states for which membership may not be achievable and for which alternatives to membership (e.g. a form of privileged partnership) have been proposed. In doing so, the paper reflects on the precedent-setting consequences of any arrangement that the EU might reach with any state re-negotiating membership or withdrawing.

An Improvement of IP Address Lookup based on Rule Filter Analysis

Multi-bit trie is a popular approach performing the longest prefix matching for packet classification. However, it requires a long lookup time and inefficiently consumes memory space. This paper presents an in-depth study of different variations of multi-bit trie for IP address lookup. Our main aim is to study a method of data structure which reduces memory space. The proposed approach has been implemented using the label method in two approaches. Both methods present better results regarding lookup speed, update time and memory bit consumptions.

The influence of high air entry filter on the testing of unsaturated soils using the axis translation technique

Suction is an important stress variable that is required for reliable predictions of the likely performance of unsaturated soils. The axis translation technique is the best established method of measuring or controlling suction; however, the success of this application is heavily dependent on the rating of the high air entry filter (HAF) and how it is incorporated into the testing system. This paper reports some basic experiments in which samples of unsaturated kaolin were brought to saturation in stages using 5 bar and 15 bar HAFs. The results have shown that the water equilibrium in unsaturated soils is greatly affected by the rating of filters. The findings also suggest that the flow through unsaturated soils is not necessarily governed by the one-dimensional consolidation theory that was developed for saturated soils, and this may be attributed to the bimodal pore size distribution of unsaturated soils.

A high performance IIR digital filter chip

The design of a high-performance IIR (infinite impulse response) digital filter is described. The chip architecture operates on 11-b parallel, two's complement input data with a 12-b parallel two's complement coefficient to produce a 14-b two's complement output. The chip is implemented in 1.5-µm, double-layer-metal CMOS technology, consumes 0.5 W, and can operate up to 15 Msample/s. The main component of the system is a fine-grained systolic array that internally is based on a signed binary number representation (SBNR). Issues addressed include testing, clock distribution, and circuitry for conversion between two's complement and SBNR.

'"To have its cake and eat it too:" US policy toward South Africa during the Kennedy administration

The assumption that US policy toward Africa was characterized by continuity during the cold war has recently been challenged by scholars who argue that President John F. Kennedy embarked on an African policy that was distinct from his predecessors. This may be true for black Africa, but Kennedy’s support for African nationalism did not extend to South Africa. This article reveals that Kennedy’s cold war priorities ensured continuity in US policy toward the apartheid state and, in some cases, additional cooperation as cold war crises increased the perceived importance of South Africa as an ideological and strategic ally and bastion against communism on a rapidly changing continent. This article also explores the role South Africa’s apartheid government played in this cold war alliance. The ruling National Party recognized its importance to US foreign policy goals and used this to stave off serious American criticism of its racial policies, deflect attention in the United Nations, and ensure continued economic and military cooperation with the United States.

Dynamic State Estimation of Power Systems with Quantization Eects: A Recursive Filter Approach

In this paper, a recursive filter algorithm is developed to deal with the state estimation problem for power systems with quantized nonlinear measurements. The measurements from both the remote terminal units and the phasor measurement unit are subject to quantizations described by a logarithmic quantizer. Attention is focused on the design of a recursive filter such that, in the simultaneous presence of nonlinear measurements and quantization effects, an upper bound for the estimation error covariance is guaranteed and subsequently minimized. Instead of using the traditional approximation methods in nonlinear estimation that simply ignore the linearization errors, we treat both the linearization and quantization errors as norm-bounded uncertainties in the algorithm development so as to improve the performance of the estimator. For the power system with such kind of introduced uncertainties, a filter is designed in the framework of robust recursive estimation, and the developed filter algorithm is tested on the IEEE benchmark power system to demonstrate its effectiveness.