New microsatellite markers for Ulva intestinalis (Chlorophyta) and the transferability of markers across species of Ulvaceae

Macroalgal blooms are a growing environmental problem in eutrophicated coastal ecosystems. Members of the green algal genus Ulva are significant contributors to blooms, which are typically dominated by only one of several co-occurring opportunistic species. Our understanding of bloom dynamics, such as the importance of clonality, is limited because previously used genetic markers such as internal transcribed spacer sequences have shown very little resolution. Microsatellites are the marker of choice for such studies, but to date, only five primer pairs have been developed for a single member of this genus, Ulva intestinalis. We have now developed four new microsatellite markers for U. intestinalis using genome screening and restriction-ligation and tested them on individuals from six populations in the Gulf of Finland, Finland. All new markers exhibited polymorphism in U. intestinalis, with the numbers of alleles ranging from 6 to 10. On the basis of assignment tests, F-ST estimates and analysis of molecular variance, there was genetic differentiation among populations. Where significantly different, expected heterozygosity (HE) was higher than observed heterozygosity (Ho), indicating a trend toward heterozygote deficiency. This may indicate that although Ulva spores can disperse relatively efficiently, asexual reproduction can result in genetic differentiation among populations. We also tested the cross-species amplification of our primers and the five primer pairs reported previously on seven species of Ulva, Ulvaria obscura and Unbraulva olivascens (all members of the Ulvaceae). In each species, from five to nine of the loci produced an amplification product, and one to four alleles were discovered at each locus. These markers therefore have great potential for testing hypotheses about the formation and maintenance of multispecies macroalgal blooms.

How long is a piece of Strix? Methods in measuring and measuring the measurers

An experiment to quantify intra- and interobserver error in anatomical measurements found that interobserver measurements can vary by over 14% of mean specimen length; disparity in measurement increases logarithmically with the number of contributors; instructions did not reduce variation or measurement disparity; scale of the specimen influenced the precision of measurement (relative error increasing with specimen size); different methods of taking a measurement yielded different results, although they did not differ in terms of precision, and topographical complexity of the elements being considered may potentially influence error (error increasing with complexity). These results highlight concerns about introduction of noise and potential bias that should be taken into account when compiling composite datasets and meta-analyses.

Spatial Allocation of Material Flow Analysis: A Geographic Information System Application of Material Flow Analysis in Ireland

This study concerns the spatial allocation of material flows, with emphasis on construction material in the Irish housing sector. It addresses some of the key issues concerning anthropogenic impact on the environment through spatial temporal visualisation of the flow of materials, wastes and emissions at different spatial levels. This is presented in the form of a spatial model, Spatial Allocation of Material Flow Analysis (SAMFA), which enables the simulation of construction material flows and associated energy use. SAMFA parallels the Island Limits project (EPA funded under 2004-SD-MS-22-M2), which aimed to create a material flow analysis of the Irish economy classified by industrial sector. SAMFA further develops this by attempting to establish the material flows at the subnational geographical scale that could be used in the development of local authority (LA) sustainability strategies and spatial planning frameworks by highlighting the cumulative environmental impacts of the development of the built environment. By drawing on the idea of planning support systems, SAMFA also aims to provide a cross-disciplinary, integrative medium for involving stakeholders in strategies for a sustainable built environment and, as such, would help illustrate the sustainability consequences of alternative The pilot run of the model in Kildare has shown that the model can be successfully calibrated and applied to develop alternative material flows and energy-use scenarios at the ED level. This has been demonstrated through the development of an integrated and a business-as-usual scenario, with the former integrating a range of potential material efficiency and energysaving policy options and the latter replicating conditions that best describe the current trend. Their comparison shows that the former is better than the latter in terms of both material and energy use. This report also identifies a number of potential areas of future research and areas of broader application. This includes improving the accuracy of the SAMFA model (e.g. by establishing actual life expectancy of buildings in the Irish context through field surveys) and the extension of the model to other Irish counties. This would establish SAMFA as a valuable predicting and monitoring tool that is capable of integrating national and local spatial planning objectives with actual environmental impacts. Furthermore, should the model prove successful at this level, it then has the potential to transfer the modelling approach to other areas of the built environment, such as commercial development and other key contributors of greenhouse emissions. The ultimate aim is to develop a meta-model for predicting the consequences of consumption patterns at the local scale. This therefore offers the possibility of creating critical links between socio technical systems with the most important challenge of all the limitations of the biophysical environment.

Dust and the type II-Plateau supernova 2004dj

We present mid-infrared (MIR) spectroscopy of a Type II-plateau supernova, SN 2004dj, obtained with the Spitzer Space Telescope, spanning 106--1393d after explosion. MIR photometry plus optical/near-IR observations are also reported. An early-time MIR excess is attributed to emission from non-silicate dust formed within a cool dense shell (CDS). Most of the CDS dust condensed between 50d and 165d, reaching a mass of $0.3x^(-5)Msun. Throughout the observations much of the longer wavelength (>10microns) part of the continuum is explained as an IR echo from interstellar dust. The MIR excess strengthened at later times. We show that this was due to thermal emission from warm, non-silicate dust formed in the ejecta. Using optical/near-IR line-profiles and the MIR continua, we show that the dust was distributed as a disk whose radius appeared to be slowly shrinking. The disk radius may correspond to a grain destruction zone caused by a reverse shock which also heated the dust. The dust-disk lay nearly face-on, had high opacities in the optical/near-IR regions, but remained optically thin in the MIR over much of the period studied. Assuming a uniform dust density, the ejecta dust mass by 996d was 0.5+/-0.1 x 10^(-4)Msun, and exceeded 10^(-4)Msun by 1393d. For a dust density rising toward the center the limit is higher. Nevertheless, this study suggests that the amount of freshly-synthesized dust in the SN 2004dj ejecta is consistent with that found from previous studies, and adds further weight to the claim that such events could not have been major contributors to the cosmic dust budget.

A three-position spectral line survey of Sagittarius B2 between 218 and 263 GHz. I. The observational data

We have surveyed the frequency band 218.30-263.55 GHz toward the core positions N and M and the quiescent cloud position NW in the Sgr B2 molecular cloud using the Swedish-ESO Submillimetre Telescope. In total 1730, 660, and 110 lines were detected in N, M, and NW, respectively, and 42 different molecular species were identified. The number of unidentified lines are 337, 51, and eight. Toward the N source, spectral line emission constitutes 22% of the total detected flux in the observed band, and complex organic molecules are the main contributors. Toward M, 14% of the broadband flux is caused by lines, and SO2 is here the dominant source of emission. NW is relatively poor in spectral lines and continuum. In this paper we present the spectra together with tables of suggested line identifications.

An analysis of VUV C (IV) emission from the JET divertor giving measurements of electron temperatures

A description of the radiation emitted by impurities from within a plasma is crucial if spectral line intensities are to be used in detailed studies, such as the analysis of impurity transport. The simplest and most direct check that can be made on measurements of line intensities is to analyse their ratios with other lines from the same ion. This avoids uncertainties in determining the volume of the emitting plasma and the absolute sensitivity calibration of the spectrometer and, in some cases, the need even for accurate measurements of parameters such as electron density. Consistency is required between the measured line intensity ratios and the theoretical values. The expected consistency has not been found for radiation emitted from the JET scrape-off layer (e.g. Lawson et al 2009a JINST 4 P04013), meaning that the description of the spectral line intensities of impurity emission from the plasma edge is incomplete. In order to gain further understanding of the discrepancies, an analysis has been carried out for emission from the JET divertor plasma and this is reported in this paper. Carbon was the main low Z intrinsic impurity in JET and an analysis of spectral line intensity ratios has been made for the C (IV) radiation emitted from the JET divertor. In this case, agreement is found between the measured and theoretical ratios to a very high accuracy, namely to within the experimental uncertainty of similar to +/- 10%. This confirms that the description of the line intensities for the present observations is complete. For some elements and ionization stages, an analysis of line intensity ratios can lead to the determination of parameters such as the electron temperature of the emitting plasma region and estimates of the contribution of recombination to the electron energy level populations. This applies to C (IV) and, to show the value and possibilities of the spectral measurements, these parameters have been calculated for a database of Ohmic and additionally heated phases of a large number of pulses. The importance of dielectronic, radiative and charge-exchange recombination as well as ionization has been investigated. In addition, the development of T-e throughout two example discharges is illustrated. The presented results indicate a number of areas for further investigation.

Thermomechanical Response of Variable Stiffness Composite Panels

Analysis of non-traditional Variable Stiffness (VS) laminates, obtained by steering the fiber orientation as a spatial function of location, have shown to improve buckling load carrying capacity of flat rectangular panels under axial compressive loads. In some cases the buckling load of simply supported panels doubled compared to the best conventional laminate with straight fibers. Two distinct cases of stiffness variation, one due to fiber orientation variation in the direction of the loading, and the other one perpendicular to the loading direction, were identified as possible contributors to the buckling load improvements. In the first case, the increase was attributed to the favorable distribution of the transverse in-plane stresses over the panel platform. In the second case, a higher degree of improvement was obtained due to the re-distribution of the applied in-plane loads. Experimental results, however, showed substantially higher levels of buckling load improvements compared with theoretical predictions. The additional improvement was determined to be due to residual stresses introduced during curing of the laminates. The present paper provides a simplified thermomechanical analysis of residual stress state of variable stiffness laminates. Systematic parametric analyses of both cases of fiber orientation variations show that, indeed much higher buckling loads could result from the residual stresses present in such laminates.

Managing Island Life:Social, Economic and Political Dimensions of Formality and Informality in Island Life

"Managing Island Life: Social, Economic and Political Dimensions of Formality and Informality in Island Life" is a significant and timely contribution to the study of islands and island life. Wide-ranging in terms of both geographical and theoretical sweep, contributions consider the conceptualisation of the island as well as social, economic and political dimensions of island life and living. Showcasing the current state of island research, contributors cover diverse areas of island life such as: informal economies in the West Indies; the effects of natural convservation policies in the Highlands and Islands of Scotland; the role of internet sites in British Isles heritage tourism, and the impact of multicultural policies in the Indian Ocean. This volume will appeal to undergraduate social scientists as well as professional anthropologists, sociologists and geographers, policy makers and islands and regional specialists.

Arsenic speciation in Japanese rice drinks and condiments

Rice has been demonstrated to be one of the major contributors to inorganic arsenic (i-As) intake in humans. However, little is known about rice products as additional source of i-As exposure. In this study, misos, syrups and amazake (a fermented sweet rice drink) produced from rice, barley and millet were analysed for total arsenic (t-As) and a subset of samples were also analyzed for As speciation. Rice based products displayed a higher i-As content than those derived from barley and millet. Most of the t-As in the rice products studied was inorganic (63-83%), the remainder being dimethylarsinic acid. Those who regularly consume rice drinks and condiments, such as the Japanese population and those who follow health conscious diets based on the Japanese cuisine, could reach up to 23% of the World Health Organization's Provisional Tolerable Daily Intake of i-As, by only consuming these kinds of products. This study provides a wide appreciation of how i-As derived from rice based products enters the human diet and how this may be of concern to populations who are already exposed to high levels of i-As through consumption of foods such as rice and seaweed.

Survey of arsenic and its speciation in rice products such as breakfast cereals, rice crackers and Japanese rice condiments

Rice has been demonstrated to be one of the major contributors to arsenic (As) in human diets in addition to drinking water, but little is known about rice products as an additional source of As exposure. Rice products were analyzed for total As and a subset of samples were measured for arsenic speciation using high performance liquid chromatography interfaced with inductively coupled plasma-mass spectrometry (HPLC-ICP-MS). A wide range of rice products had total and inorganic arsenic levels that typified those found in rice grain including, crisped rice, puffed rice, rice crackers, rice noodles and a range of Japanese rice condiments as well as rice products targeted at the macrobiotic, vegan, lactose intolerant and gluten intolerance food market. Most As in rice products are inorganic As (75.2-90.1%). This study provides a wider appreciation of how inorganic arsenic derived from rice products enters the human diet. (C) 2008 Elsevier Ltd. All rights reserved.

The Houses of the Oireachtas:Parliament in Ireland

The Irish parliament - the Oireachtas - is nearing the centenary year of its foundation, making it one of the oldest continuously surviving parliaments in the world. As the most important national institution in the state, it plays an essential role in giving voice to a diversity of views and opinions, providing stable governments, approving law and national budgets and upholding democratic values. For much of its existence, however, and most pointedly in the context of recent banking and economic crises, it has been subject to criticism concerning its ability to adequately hold the executive to account, to act as a coherent policy-making forum, to meet the challenges arising from European Union membership, to embrace wide-ranging reforms and to develop with purpose and ambition.

This comprehensive new volume considers all aspects of the Houses of the Oireachtas - including their evolution, composition, organisation, financing, administration and reform. Contributors include academics, administrators and sitting and former parliamentarians. Contemporary challenges brought about by transformations in media style, increased inter-parliamentarism and the changing character of politics are also addressed. The book questions a number of assumptions about parliament and its work, including the efficacy of the legislative and budgetary processes, the nature of executive-legislative relations and the perceived encroachment of the courts on the legislature. Combined, this wide-ranging and detailed study fills a long-standing void, and provides essential reading not alone for those interested in Irish politics and government, but also for students and scholars of legislative studies.

Romanticism and Blackwood's Magazine:'An Unprecedented Phenomenon'

Romanticism and Blackwood's Magazine is inspired by the ongoing critical fascination with Blackwood's Edinburgh Magazine, and the burgeoning recognition of its centrality to the Romantic age. Though the magazine itself was published continuously for well over a century and a half, this volume concentrates specifically on those years when William Blackwood was at the helm, beginning with his founding of the magazine in 1817 and closing with his death in 1834. These were the years when, as Samuel Taylor Coleridge put it in 1832, Blackwood's reigned as 'an unprecedented Phenomenon in the world of letters.' The magazine placed itself at the centre of the emerging mass media, commented decisively on all the major political and cultural issues that shaped the Romantic movement, and published some of the leading writers of the day, including Coleridge, Thomas De Quincey, John Galt, Felicia Hemans, James Hogg, Walter Scott, and Mary Shelley.

'This much-needed volume reminds us not only why Blackwood's was the most influential periodical publication of the time, but also how its writers, writings, and critical agendas continue to shape so many of the scholarly concerns of Romantic studies in the twenty-first century.' - Charles Mahoney, Associate Professor, University of Connecticut, USA

List of Illustrations
Acknowledgements
Abbreviations
Notes on Contributors
'A character so various, and yet so indisputably its own': A Passage to Blackwood's Edinburgh Magazine; R.Morrison & D.S.Roberts
PART I: BLACKWOOD'S AND THE PERIODICAL PRESS
Beginning Blackwood's: The Right Mix of Dulce and Ùtile; P.Flynn
John Gibson Lockhart and Blackwood's: Shaping the Romantic Periodical Press; T.Richardson
From Gluttony to Justified Sinning: Confessional Writing in Blackwood's and the London Magazine; D.Higgins
Camaraderie and Conflict: De Quincey and Wilson on Enemy Lines; R.Morrison
Selling Blackwood's Magazine, 1817-1834; D.Finkelstein
PART II: BLACKWOOD'S CULTURE AND CRITICISM
Blackwood's 'Personalities'; T.Mole
Communal Reception, Mary Shelley, and the 'Blackwood's School' of Criticism; N.Mason
Blackwoodian Allusion and the Culture of Miscellaneity; D.Stewart
Blackwood's Edinburgh Magazine in the Scientific Culture of Early Nineteenth-Century Edinburgh; W.Christie
The Art and Science of Politics in Blackwood's Edinburgh Magazine, c. 1817-1841; D.Kelly
Prosing Poetry: Blackwood's and Generic Transposition, 1820-1840; J.Camlot
PART III: BLACKWOOD'S FICTIONS
Blackwood's and the Boundaries of the Short Story; T.Killick
The Edinburgh of Blackwood's Edinburgh Magazine and James Hogg's Fiction; G.Hughes
'The Taste for Violence in Blackwood's Magazine'; M.Schoenfield
PART IV: BLACKWOOD'S AT HOME
John Wilson and Regency Authorship; R.Cronin
John Wilson and Sport; J.Strachan
William Maginn and the Blackwood's 'Preface' of 1826; D.E.Latané, Jr.
All Work and All Play: Felicia Hemans's Edinburgh Noctes; N.Sweet
PART V: BLACKWOOD'S ABROAD
Imagining India in Early Blackwood's; D.S.Roberts
Tales of the Colonies: Blackwood's, Provincialism, and British Interests Abroad; A.Jarrells
Selected Bibliography
Index

ROBERT MORRISON is Queen's National Scholar at Queen's University, Kingston, Ontario, Canada. His book, The English Opium-Eater: A Biography of Thomas De Quincey was a finalist for the James Tait Black Prize. He has edited writings by Jane Austen, Leigh Hunt, Thomas De Quincey, and John Polidori.
DANIEL SANJIV ROBERTS is Reader in English at Queen's University Belfast, UK. His publications include a monograph, Revisionary Gleam: De Quincey, Coleridge, and the High Romantic Argument (2000), and major critical editions of Thomas De Quincey's Autobiographic Sketches and Robert Southey's The Curse of Kehama; the latter was cited as a Distinguished Scholarly Edition by the MLA. He is currently working on an edition of Charles Johnstone's novel The History of Arsaces, Prince of Betlis for the Early Irish Fiction series.

Risk factors related to inflammation and endothelial dysfunction in the DCCT/EDIC cohort and their relationship with nephropathy and macrovascular complications

Because endothelial cell dysfunction and inflammation are key contributors to the development of complications in type 1 diabetes, we studied risk factors related to endothelial dysfunction and inflammation (C-reactive protein and fibrinogen, soluble vascular cell adhesion molecule-1, intracellular adhesion molecule-1, and E-selectin, and fibrinolytic markers) in a subgroup of patients from the Diabetes Control and Complications Trial (DCCT)/Epidemiology of Diabetes Intervention and Complications (EDIC) study cohort.

PLUMED 2: New feathers for an old bird

Enhancing sampling and analyzing simulations are central issues in molecular simulation. Recently, we introduced PLUMED, an open-source plug-in that provides some of the most popular molecular dynamics (MD) codes with implementations of a variety of different enhanced sampling algorithms and collective variables (CVs). The rapid changes in this field, in particular new directions in enhanced sampling and dimensionality reduction together with new hardware, require a code that is more flexible and more efficient. We therefore present PLUMED 2 here a,complete rewrite of the code in an object-oriented programming language (C++). This new version introduces greater flexibility and greater modularity, which both extends its core capabilities and makes it far easier to add new methods and CVs. It also has a simpler interface with the MD engines and provides a single software library containing both tools and core facilities. Ultimately, the new code better serves the ever-growing community of users and contributors in coping with the new challenges arising in the field.

Program summary

Program title: PLUMED 2

Catalogue identifier: AEEE_v2_0

Program summary URL: http://cpc.cs.qub.ac.uk/summaries/AEEE_v2_0.html

Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland

Licensing provisions: Yes

No. of lines in distributed program, including test data, etc.: 700646

No. of bytes in distributed program, including test data, etc.: 6618136

Distribution format: tar.gz

Programming language: ANSI-C++.

Computer: Any computer capable of running an executable produced by a C++ compiler.

Operating system: Linux operating system, Unix OSs.

Has the code been vectorized or parallelized?: Yes, parallelized using MPI.

RAM: Depends on the number of atoms, the method chosen and the collective variables used.

Classification: 3, 7.7, 23. Catalogue identifier of previous version: AEEE_v1_0.

Journal reference of previous version: Comput. Phys. Comm. 180 (2009) 1961.

External routines: GNU libmatheval, Lapack, Bias, MPI. (C) 2013 Elsevier B.V. All rights reserved.

The Changing Worlds and Workplaces of Capitalism

How do the large scale structures of capitalism and the local social relations of workplaces and organisations shape each other? Through a series of European studies of capital and labour's shifting struggles and compromises; of the politics of welfare, industrial relations and labour markets; and the transformation of post-industrial networked workplaces, this edited collection shows how capitalist workplaces and economies are changing today. The first section explores how European capitalism developed and the different national forms of the struggle between capital and labour for a bigger share of national income. In the second part of the volume, the contributors investigate the institutions that are the building blocks of these different national forms, and how they are changing as labour markets are increasingly shaped by globalisation, feminisation and liberalisation. The final chapters examine how these institutions of capitalism play out in the contemporary workplace – where the most dynamic sectors are based on loose networks and external labour markets and a shifting, uncertain alliance between employers and workers. The authors argue for a new integration of political economy and the sociology of work and organisations.