Not thinking straight? A critical discourse analysis of the 2006 Irish High Court ruling in Zappone and Gilligan v. Revenue Commissioners and Attorney General

The recognition and protection of constitutional rights is a fundamental precept. In Ireland, the right to marry is provided for in the equality provisions of Article 40 of the Irish Constitution (1937). However, lesbians and gay men are denied the right to marry in Ireland. The ‘last word’ on this issue came into being in the High Court in 2006, when Katherine Zappone and Ann Louise Gilligan sought, but failed, to have their Canadian marriage recognised in Ireland. My thesis centres on this constitutional court ruling. So as to contextualise the pursuit of marriage equality in Ireland, I provide details of the Irish trajectory vis-à-vis relationship and family recognition for same-sex couples. In Chapter One, I discuss the methodological orientation of my research, which derives from a critical perspective. Chapter Two denotes my theorisation of the principle of equality and the concept of difference. In Chapter Three, I discuss the history of the institution of marriage in the West with its legislative underpinning. Marriage also has a constitutional underpinning in Ireland, which derives from Article 41 of our Constitution. In Chapter Four, I discuss ways in which marriage and family were conceptualised in Ireland, by looking at historical controversies surrounding the legalisation of contraception and divorce. Chapter Five denotes a Critical Discourse Analysis of the High Court ruling in Zappone and Gilligan. In Chapter Six, I critique text from three genres of discourse, i.e. ‘Letters to the Editor’ regarding same-sex marriage in Ireland, communication from legislators vis-à-vis the 2004 legislative impediment to same-sex marriage in Ireland, and parliamentary debates surrounding the 2010 enactment of civil partnership legislation in Ireland. I conclude my research by reflecting on my methodological and theoretical considerations with a view to answering my research questions. Author’s Update: Following the outcome of the 2015 constitutional referendum vis-à-vis Article 41, marriage equality has been realised in Ireland.

Covert conversations: disciplined improvisation and meaning-making in the masters (MA) supervisory relationship

This research asks the question: “What are the relational dynamics in Masters (MA) supervision?” It does so by focusing upon the supervisory relationship itself. It does this through dialoguing with the voices of both MA supervisors and supervisees in the Humanities using a Cultural Historical Activity Theory (CHAT) framework. In so doing, this research argues for a re-evaluation of how MA supervision is conceptualised and proposes a new theoretical framework for conceptualising MA supervision as a relational phenomenon. The research design was derived from an Activity Theory-influenced methodology. Data collection procedures included the administration of Activity Theory Logs, individual semi-structured interviews with both supervisors and supervisees and the completion of reflective journals. Grounded Theory was used to analyse the data. The sample for the study consists of three supervisor-supervisee dyads from three disciplines in the Humanities. Data was collected over the course of one academic year, 2010-2011. This research found that both individual and shared relational dynamics play an important role in MA supervision. Individual dynamics, such as supervisors’ iterative negotiation of ambiguity/clarity and supervisees’ boundary work, revealed that both parties attempt to negotiate a separation between their professional-academic identities and personal identities. However, an inherent paradox emerged when the shared relational dynamics of MA supervision were investigated. It was found that the shared space created by the supervisory relationship did not only exist in a physical setting, but was also psychoactive in nature and held strong emotional resonances for both parties involved. This served to undermine the separation between professional-academic and personal identities. As a result, this research argues that the interaction between the individual and shared relational dynamics in MA supervision enables, for both supervisors and supervisees, a disciplined improvisation of academic identity.

Simulation of multigate SOI transistors with silicon, germanium and III-V channels

In this work by employing numerical three-dimensional simulations we study the electrical performance and short channel behavior of several multi-gate transistors based on advanced SOI technology. These include FinFETs, triple-gate and gate-all-around nanowire FETs with different channel material, namely Si, Ge, and III-V compound semiconductors, all most promising candidates for future nanoscale CMOS technologies. Also, a new type of transistor called “junctionless nanowire transistor” is presented and extensive simulations are carried out to study its electrical characteristics and compare with the conventional inversion- and accumulation-mode transistors. We study the influence of device properties such as different channel material and orientation, dimensions, and doping concentration as well as quantum effects on the performance of multi-gate SOI transistors. For the modeled n-channel nanowire devices we found that at very small cross sections the nanowires with silicon channel are more immune to short channel effects. Interestingly, the mobility of the channel material is not as significant in determining the device performance in ultrashort channels as other material properties such as the dielectric constant and the effective mass. Better electrostatic control is achieved in materials with smaller dielectric constant and smaller source-to-drain tunneling currents are observed in channels with higher transport effective mass. This explains our results on Si-based devices. In addition to using the commercial TCAD software (Silvaco and Synopsys TCAD), we have developed a three-dimensional Schrödinger-Poisson solver based on the non-equilibrium Green’s functions formalism and in the framework of effective mass approximation. This allows studying the influence of quantum effects on electrical performance of ultra-scaled devices. We have implemented different mode-space methodologies in our 3D quantum-mechanical simulator and moreover introduced a new method to deal with discontinuities in the device structures which is much faster than the coupled-mode-space approach.

First principles modelling of nucleation and growth during atomic layer deposition onto III-V substrates

Atomic layer deposition (ALD) is now used in semiconductor fabrication lines to deposit nanometre-thin oxide films, and has thus enabled the introduction of high-permittivity dielectrics into the CMOS gate stack. With interest increasing in transistors based on high mobility substrates, such as GaAs, we are investigating the surface treatments that may improve the interface characteristics. We focus on incubation periods of ALD processes on III-V substrates. We have applied first principles Density Functional Theory (DFT) to investigate detailed chemistry of these early stages of growth, specifically substrate and ALD precursor interaction. We have modelled the ‘clean-up’ effect by which organometallic precursors: trimethylaluminium (TMA) or hafnium and titanium amides clean arsenic oxides off the GaAs surface before ALD growth of dielectric commences and similar effect on Si3N4 substrate. Our simulations show that ‘clean-up’ of an oxide film strongly depends on precursor ligand, its affinity to the oxide and the redox character of the oxide. The predominant pathway for a metalloid oxide such as arsenic oxide is reduction, producing volatile molecules or gettering oxygen from less reducible oxides. An alternative pathway is non-redox ligand exchange, which allows non-reducible oxides (e.g. SiO2) to be cleaned-up. First principles study shows also that alkylamides are more susceptible to decomposition rather than migration on the oxide surface. This improved understanding of the chemical principles underlying ‘clean-up’ allows us to rationalize and predict which precursors will perform the reaction. The comparison is made between selection of metal chlorides, methyls and alkylamides precursors.

Atomic layer deposition of interface control layers for the fabrication of III/V MOS devices

The continued advancement of metal oxide semiconductor field effect transistor (MOSFET) technology has shifted the focus from Si/SiO2 transistors towards high-κ/III-V transistors for high performance, faster devices. This has been necessary due to the limitations associated with the scaling of the SiO2 thickness below ~1 nm and the associated increased leakage current due to direct electron tunnelling through the gate oxide. The use of these materials exhibiting lower effective charge carrier mass in conjunction with the use of a high-κ gate oxide allows for the continuation of device scaling and increases in the associated MOSFET device performance. The high-κ/III-V interface is a critical challenge to the integration of high-κ dielectrics on III-V channels. The interfacial chemistry of the high-κ/III-V system is more complex than Si, due to the nature of the multitude of potential native oxide chemistries at the surface with the resultant interfacial layer showing poor electrical insulating properties when high-κ dielectrics are deposited directly on these oxides. It is necessary to ensure that a good quality interface is formed in order to reduce leakage and interface state defect density to maximise channel mobility and reduce variability and power dissipation. In this work, the ALD growth of aluminium oxide (Al2O3) and hafnium oxide (HfO2) after various surface pre-treatments was carried out, with the aim of improving the high-κ/III-V interface by reducing the Dit – the density of interface defects caused by imperfections such as dangling bonds, dimers and other unsatisfied bonds at the interfaces of materials. A brief investigation was performed into the structural and electrical properties of Al2O3 films deposited on In0.53Ga0.47As at 200 and 300oC via a novel amidinate precursor. Samples were determined to experience a severe nucleation delay when deposited directly on native oxides, leading to diminished functionality as a gate insulator due to largely reduced growth per cycle. Aluminium oxide MOS capacitors were prepared by ALD and the electrical characteristics of GaAs, In0.53Ga0.47As and InP capacitors which had been exposed to pre-pulse treatments from triethyl gallium and trimethyl indium were examined, to determine if self-cleaning reactions similar to those of trimethyl aluminium occur for other alkyl precursors. An improved C-V characteristic was observed for GaAs devices indicating an improved interface possibly indicating an improvement of the surface upon pre-pulsing with TEG, conversely degraded electrical characteristics observed for In0.53Ga0.47As and InP MOS devices after pre-treatment with triethyl gallium and trimethyl indium respectively. The electrical characteristics of Al2O3/In0.53Ga0.47As MOS capacitors after in-situ H2/Ar plasma treatment or in-situ ammonium sulphide passivation were investigated and estimates of interface Dit calculated. The use of plasma reduced the amount of interface defects as evidenced in the improved C-V characteristics. Samples treated with ammonium sulphide in the ALD chamber were found to display no significant improvement of the high-κ/III-V interface. HfO2 MOS capacitors were fabricated using two different precursors comparing the industry standard hafnium chloride process with deposition from amide precursors incorporating a ~1nm interface control layer of aluminium oxide and the structural and electrical properties investigated. Capacitors furnished from the chloride process exhibited lower hysteresis and improved C-V characteristics as compared to that of hafnium dioxide grown from an amide precursor, an indication that no etching of the film takes place using the chloride precursor in conjunction with a 1nm interlayer. Optimisation of the amide process was carried out and scaled samples electrically characterised in order to determine if reduced bilayer structures display improved electrical characteristics. Samples were determined to exhibit good electrical characteristics with a low midgap Dit indicative of an unpinned Fermi level