Relative abundance and population biology of the non-indigenous crab Charybdis hellerii (Crustacea: Brachyura: Portunidae) in a southwestern Atlantic estuary-bay complex

Invasive species are potential threats to biodiversity, especially if they become established and outnumber native species. In this study, a population of the non-indigenous crab Charybdis hellerii was analyzed in an estuary-bay complex on the southeastern Brazilian coast, with respect to its abundance relative to sympatric native brachyuran species, as well as the size structure, sexual maturity, sex ratio, frequency of mutilation, reproductive period, and development of the reproductive system. Crabs were sampled monthly both in the intertidal zone of rocky shores and on sublittoral soft-bottom. Nine species were recorded on the rocky shores, where C. hellerii was the second most abundant species; only three individuals of C. hellerii were collected in the sublittoral samples. This population of C. hellerii showed a unimodal size structure composed mainly of mature individuals; males were larger than females, and the sex ratio was skewed toward males (3.1:1). About 46.9% of the individuals (75 of 160 crabs) had mutilated or regenerating appendages, more frequent in males (56.8%) than in females (28.2%), which may reflect both inter- and intraspecific agonistic interactions. A continuous reproductive pattern is suggested for this population, although ovigerous females occurred unevenly during the year, with 58.82% of them being collected in winter. There was evidence of multiple spawning, since the ovigerous females with an initial egg mass showed mature ovaries as well as seminal receptacles filled with sperm. C. hellerii is well established in the estuary-bay complex, but is concentrated in intertidal and shallow subtidal rocky shores, where it may compete with and replace other species such as the portunid Cronius ruber. This study also highlights the importance of systematic monitoring studies to evaluate the effects of the introduction of non-indigenous species on ecologically similar natives.

Orobothriurus (Scorpiones: Bothriuridae) phylogeny, Andean biogeography, and the relative importance of genitalic and somatic characters

The genus Orobothriurus Maury, 1976 (Bothriuridae Simon, 1880) displays an Andean pattern of distribution, most of its species occurring at high altitudes (over 2000-2500 m to a maximum altitude record of 4910 m) from central Peru to Argentina. The recent discovery of several new species and the uncertain phylogenetic position of Orobothriurus lourencoi Ojanguren Affilastro, 2003, required a reanalysis of Orobothriurus phylogeny. Thirty bothriurid taxa, including all species of Orobothriurus and Pachakutej Ochoa, 2004, were scored for 65 morphological characters and analysed with parsimony under equal and implied weighting. The resulting topology justifies the establishment of a new genus, Rumikiru Ojanguren Affilastro et al., in press, for O. lourencoi and a closely related, new species, Rumikiru atacama Ojanguren Affilastro et al., in press. It also offers new insights about the phylogeny and biogeography of Orobothriurus and related genera. Characters from the male genitalia (i.e. hemispermatophore), comprising approximately 26% of the morphological matrix, were found to be less homoplastic than those from somatic morphology, contradicting suggestions that genitalia are uninformative or potentially misleading in phylogenetic studies.

Determination of relative in vivo osteoconductivity of modified potassium fluorrichterite glass-ceramics compared with 45S5 bioglass

Potassium fluorrichterite (KNaCaMg5Si8O22F2) glass-ceramics were modified by either increasing the concentration of calcium (GC5) or by the addition of P2O5 (GP2). Rods (2 x 4 mm) of stoichiometric fluorrichterite (GST), modified compositions (GC5 and GP2) and 45S5 bioglass, which was used as the reference material, were prepared using a conventional lost-wax technique. Osteoconductivity was investigated by implantation into healing defects in the midshaft of rabbit femora. Specimens were harvested at 4 and 12 weeks following implantation and tissue response was investigated using computed microtomography (mu CT) and histological analyses. The results showed greatest bone to implant contact in the 45S5 bioglass reference material at 4 and 12 weeks following implantation, however, GST, GC5 and GP2 all showed direct bone tissue contact with evidence of new bone formation and cell proliferation along the implant surface into the medullary space. There was no evidence of bone necrosis or fibrous tissue encapsulation around the test specimens. Of the modified potassium fluorrichterite compositions, GP2 showed the greatest promise as a bone substitute material due to its osteoconductive potential and superior mechanical properties.

Evaluation of relative biological efficiency of additives in sugarcane ensiling

The objective of this study was to evaluate the effects of adding alkalis on the fermentative pattern, aerobic stability and nutritive value of the sugarcane silage. A completely randomized design with 6 additives in two concentrations (1 or 2%), plus a control group, totalizing 13 treatments [(6x2)+1] with four replications, was used. The additives were sodium hydroxide (NaOH), limestone (CaCO3), urea (CO(NH2)(2)), sodium bicarbonate (NaHCO3), quicklime (CaO) and hydrated lime (Ca(OH)(2)). The material was ensiled in 52 laboratory silos using plastic buckets with 12 L of capacity. Silos were opened 60 days after ensiling, when organic acids concentration, aerobic stability and chemical composition were determined. The Relative Biological Efficiency (RBE) was calculated by the slope ratio method, using the data obtained from ratio between desirable and undesirable silage products, according to the equation: D/U ratio = [lactic/(ethanol + acetic + butyric)]. All additives affected dry matter, crude protein, acid detergent fiber, neutral detergent fiber contents and buffering capacity. Except for urea and quicklime, all additives increased the in vitro dry matter digestibility. In general, these additives altered the fermentative pattern of sugarcane silage, inhibiting alcoholic fermentation and improving lactic acid production. The additive that showed the best RBE in relation to sodium hydroxide (100%) was limestone (89.4%). The RBE values of urea, sodium bicarbonate and hydrated lime were 49.2%, 47.7% and 34.3%, respectively.

Influence of the relative amounts of crystalline and amorphous phases on the mechanical properties of polyamide-6 nanocomposites

The relative amounts of amorphous and crystalline ?- and a-phases in polyamide-6 nanocomposites, estimated from the deconvolution of X-ray diffraction peaks using Gaussian functions, correlates with their mechanical, thermomechanical, and barrier properties. The incorporation of organoclay platelets (Cloisite 15A and 30B) induced the crystallization of the polymer in the ? form at expense of the amorphous phase, such that 12 wt % of Cloisite is enough to enhance the mechanical and the thermomechanical properties. However, higher nanofiller loads were necessary to achieve good barrier effects, because this property is mainly dependent on the tortuous path permeation mechanism of the gas molecules through the nanocomposite films. (C) 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012

ON THE RADICAL OF A FREE MALCEV ALGEBRA

We prove that the prime radical rad M of the free Malcev algebra M of rank more than two over a field of characteristic not equal 2 coincides with the set of all universally Engelian elements of M. Moreover, let T(M) be the ideal of M consisting of all stable identities of the split simple 7-dimensional Malcev algebra M over F. It is proved that rad M = J(M) boolean AND T(M), where J(M) is the Jacobian ideal of M. Similar results were proved by I. Shestakov and E. Zelmanov for free alternative and free Jordan algebras.

The last mangroves of Marajo Island - Eastern Amazon: Impact of climate and/or relative sea-level changes

The dynamics, over the last 7500 years, of a mangrove at Marajo Island in northern Brazil were studied by pollen and sedimentary facies analyses using sediment cores. This island, located at the mouth of the Amazon River. is influenced by riverine inflow combined with tidal fluctuations of the equatorial Atlantic Ocean. Herbaceous vegetation intermingled with rainforest dominates the central area of the island, while varzea is the main vegetation type along the littoral. In particular, the modem northeastern coastal zone is covered by a mosaic of dense rainforest, herbaceous vegetation, mangroves, varzea, and restinga. The integration of pollen data and fades descriptions indicates a tidal mud flat colonized by mangroves in the interior of Marajo Island between similar to 7500 cal yr BP and similar to 3200 cal yr BP. During the late Holocene, mangroves retracted to a small area (100-700 m in width) along the northeastern coastal plain. Mangrove expansion during the early and mid Holocene was likely caused by the post-glacial sea-level rise which, combined with tectonic subsidence, led to a rise in tidal water salinity. Salinity must have further increased due to low river discharge resulting from increased aridity during the early and mid Holocene. The shrinking of the area covered by mangrove vegetation during the late Holocene was likely caused by the increase in river discharge during the late Holocene, which has maintained relatively low tidal water salinity in Marajo Island. Tidal water salinity is relatively higher in the northeastern part of the island than in others, due to the southeast-northwest trending current along the littoral. The mixing of marine and riverine freshwater inflows has provided a refuge for mangroves in this area. The increase in flow energy during the last century is related to landward sand migration, which explains the current retraction of mangroves. These changes may indicate an increased exposure to tidal influence driven by the relative sea-level rise, either associated with global fluctuations or tectonic subsidence, and/or by an increase in river water discharge. (C) 2012 Elsevier B.V. All rights reserved.

Detailed H-1 and C-13 NMR structural assignment and relative stereochemistry determination for three new and one known semi-synthetic sesquiterpene lactones

In this work is described a complete H-1 and C-13 NMR analysis for a group of four sesquiterpene lactones, three previously unknown. The unequivocal assignments were achieved by H-1 NMR, C-13{H-1} NMR, gCOSY. gHMQC, gHMBC and NOESY experiments and no ambiguities were left behind. All hydrogen coupling constants were measured, clarifying all hydrogen signals multiplicities. (C) 2011 Elsevier B.V. All rights reserved.

Infinite dimensional Lie algebra associated with conformal transformations of the two-point velocity correlation tensor from isotropic turbulence

We deal with homogeneous isotropic turbulence and use the two-point velocity correlation tensor field (parametrized by the time variable t) of the velocity fluctuations to equip an affine space K3 of the correlation vectors by a family of metrics. It was shown in Grebenev and Oberlack (J Nonlinear Math Phys 18:109–120, 2011) that a special form of this tensor field generates the so-called semi-reducible pseudo-Riemannian metrics ds2(t) in K3. This construction presents the template for embedding the couple (K3, ds2(t)) into the Euclidean space R3 with the standard metric. This allows to introduce into the consideration the function of length between the fluid particles, and the accompanying important problem to address is to find out which transformations leave the statistic of length to be invariant that presents a basic interest of the paper. Also we classify the geometry of the particles configuration at least locally for a positive Gaussian curvature of this configuration and comment the case of a negative Gaussian curvature.

The relative roles of DNA damage induced by UVA irradiation in human cells

UVA light (320–400 nm) represents approximately 95% of the total solar UV radiation that reaches the Earth’s surface. UVA light induces oxidative stress and the formation of DNA photoproducts in skin cells. These photoproducts such as pyrimidine dimers (cyclobutane pyrimidine dimers, CPDs, and pyrimidine (6-4) pyrimidone photoproducts, 6-4PPs) are removed by nucleotide excision repair (NER). In this repair pathway, the XPA protein is recruited to the damage removal site; therefore, cells deficient in this protein are unable to repair the photoproducts. The aim of this study was to investigate the involvement of oxidative stress and the formation of DNA photoproducts in UVA-induced cell death. In fact, similar levels of oxidative stress and oxidised bases were detected in XP-A and NER-proficient cells exposed to UVA light. Interestingly, CPDs were detected in both cell lines; however, 6-4PPs were detected only in DNA repairdeficient cells. XP-A cells were also observed to be significantly more sensitive to UVA light compared to NER-proficient cells, with an increased induction of apoptosis, while necrosis was similarly observed in both cell lines. The induction of apoptosis and necrosis in XP-A cells using adenovirus-mediated transduction of specific photolyases was investigated and we confirm that both types of photoproducts are the primary lesions responsible for inducing cell death in XP-A cells and may trigger the skin-damaging effects of UVA light, particularly skin ageing and carcinogenesis.

Relative CO(2)/NH(3) selectivities of mammalian aquaporins 0-9

Previous work showed that aquaporin 1 (AQP1), AQP4-M23, and AQP5 each has a characteristic CO(2)/NH(3) and CO(2)/H(2)O permeability ratio. The goal of the present study is to characterize AQPs 0-9, which traffic to the plasma membrane when heterologously expressed in Xenopus oocytes. We use video microscopy to compute osmotic water permeability (P(f)) and microelectrodes to record transient changes in surface pH (ΔpH(S)) caused by CO(2) or NH(3) influx. Subtracting respective values for day-matched, H(2)O-injected control oocytes yields the channel-specific values P(f)* and ΔpH(S)*. We find that P(f)* is significantly >0 for all AQPs tested except AQP6. (ΔpH(S)*)(CO(2)) is significantly >0 for AQP0, AQP1, AQP4-M23, AQP5, AQP6, and AQP9. (ΔpH(S)*)(NH(3)) is >0 for AQP1, AQP3, AQP6, AQP7, AQP8, and AQP9. The ratio (ΔpH(S)*)(CO(2))/P(f)* falls in the sequence AQP6 (∞) > AQP5 > AQP4-M23 > AQP0 ≅ AQP1 ≅ AQP9 > others (0). The ratio (ΔpH(S)*)(NH(3))/P(f)* falls in the sequence AQP6 (∞) > AQP3 ≅ AQP7 ≅ AQP8 ≅ AQP9 > AQP1 > others (0). Finally, the ratio (ΔpH(S)*)(CO(2))/(-ΔpH(S)*)(NH(3)) falls in the sequence AQP0 (∞) ≅ AQP4-M23 ≅ AQP5 > AQP6 > AQP1 > AQP9 > AQP3 (0) ≅ AQP7 ≅ AQP8. The ratio (ΔpH(S)*)(CO(2))/(-ΔpH(S)*)(NH(3)) is indeterminate for both AQP2 and AQP4-M1. In summary, we find that mammalian AQPs exhibit a diverse range of selectivities for CO(2) vs. NH(3) vs. H(2)O. As a consequence, by expressing specific combinations of AQPs, cells could exert considerable control over the movements of each of these three substances

Relative CO2/NH3 permeabilities of human RhAG, RhBG and RhCG

Mammalian glycosylated rhesus (Rh) proteins include the erythroid RhAG and the nonerythroid RhBG and RhCG. RhBG and RhCG are expressed in multiple tissues, including hepatocytes and the collecting duct (CD) of the kidney. Here, we expressed human RhAG, RhBG and RhCG in Xenopus oocytes (vs. H2O-injected control oocytes) and used microelectrodes to monitor the maximum transient change in surface pH (ΔpHS) caused by exposing the same oocyte to 5 % CO2/33 mM HCO3 − (an increase) or 0.5 mM NH3/NH4 + (a decrease). Subtracting the respective values for day-matched, H2O-injected control oocytes yielded channel-specific values (*). (ΔpH∗S)CO2 and (−ΔpH∗S)NH3 were each significantly >0 for all channels, indicating that RhBG and RhCG—like RhAG—can carry CO2 and NH3. We also investigated the role of a conserved aspartate residue, which was reported to inhibit NH3 transport. However, surface biotinylation experiments indicate the mutants RhBGD178N and RhCGD177N have at most a very low abundance in the oocyte plasma membrane. We demonstrate for the first time that RhBG and RhCG—like RhAG—have significant CO2 permeability, and we confirm that RhAG, RhBG and RhCG all have significant NH3 permeability. However, as evidenced by (ΔpH∗S)CO2/(−ΔpH∗S)NH3 values, we could not distinguish among the CO2/NH3 permeability ratios for RhAG, RhBG and RhCG. Finally, we propose a mechanism whereby RhBG and RhCG contribute to acid secretion in the CD by enhancing the transport of not only NH3 but also CO2 across the membranes of CD cells.

A comparative analysis of the relative efficacy of vector-control strategies against dengue fever

Dengue is considered one of the most important vector-borne infection, affecting almost half of the world population with 50 to 100 million cases every year. In this paper, we present one of the simplest models that can encapsulate all the important variables related to vector control of dengue fever. The model considers the human population, the adult mosquito population and the population of immature stages, which includes eggs, larvae and pupae. The model also considers the vertical transmission of dengue in the mosquitoes and the seasonal variation in the mosquito population. From this basic model describing the dynamics of dengue infection, we deduce thresholds for avoiding the introduction of the disease and for the elimination of the disease. In particular, we deduce a Basic Reproduction Number for dengue that includes parameters related to the immature stages of the mosquito. By neglecting seasonal variation, we calculate the equilibrium values of the model’s variables. We also present a sensitivity analysis of the impact of four vector-control strategies on the Basic Reproduction Number, on the Force of Infection and on the human prevalence of dengue. Each of the strategies was studied separately from the others. The analysis presented allows us to conclude that of the available vector control strategies, adulticide application is the most effective, followed by the reduction of the exposure to mosquito bites, locating and destroying breeding places and, finally, larvicides. Current vector-control methods are concentrated on mechanical destruction of mosquitoes’ breeding places. Our results suggest that reducing the contact between vector and hosts (biting rates) is as efficient as the logistically difficult but very efficient adult mosquito’s control.