Estuarine and oceanic influences on copepod abundance and production of a subtropical coastal area

We investigated the influence of nutrient-rich oceanic waters in comparison to the estuarine outflow from Santos Bay (SE Brazil) on copepod abundance and production on the adjacent inner shelf. Zooplankton samples were collected with a Multinet in spring 2005 and in summer 2006. Copepod biomass was derived from length-weight regressions, and growth rates were estimated from empirical models. Altogether, 58 copepod taxa were identified. The highest abundances were due to small-sized organisms including nauplii, oncaeids and copepodids of paracalanids and clausocalanids. Biomass and secondary production mirrored copepod abundance, with Temora copepodids accompanying the above-mentioned taxa as major contributors. The contribution of naupliar biomass and production was low (2.2 and 3.8% of the total, respectively). The influence of the Santos Bay outflow was observed only in spring, when Coastal Water (CW) dominated at the study site; whereas in summer the inner shelf was occupied by CW in the surface layer and the oceanic South Atlantic Central Water (SACW) in the bottom layer. The SACW intrusion had more of an influence for the increase in copepod production than the Santos Bay plume. The distribution and dynamics of the oceanic water masses seemed to be the most important influence on copepod diversity and production at this subtropical site.

Techniques for the In Vitro Production of Queens in Stingless Bees (Apidae, Meliponini)

Considering the ecological importance of stingless bees as caretakers and pollinators of a variety of native plants makes it necessary to improve techniques which increase of colonies' number in order to preserve these species and the biodiversity associated with them. Thus, our aim was to develop a methodology of in vitro production of stingless bee queens by offering a large quantity of food to the larvae. Our methodology consisted of determining the amount of larval food needed for the development of the queens, collecting and storing the larval food, and feeding the food to the larvae in acrylic plates. We found that the total average amount of larval food in a worker bee cell of E varia is approximately 26.70 +/- 3.55 mu L. We observed that after the consumption of extra amounts of food (25, 30, 35 and 40 mu L) the larvae differentiate into queens (n = 98). Therefore, the average total volume of food needed for the differentiation of a young larva of F. varia queen is approximately 61.70 +/- 5.00 mu L. In other words; the larvae destined to become queens eat 2.31 times more food than the ones destined to become workers. We used the species Frieseomelitta varia as a model, however the methodology can be reproduced for all species of stingless bees whose mechanism of caste differentiation depends on the amount of food ingested by the larvae. Our results demonstrate the effectiveness of the in vitro technique developed herein, pointing to the possibility of its use as a tool to assist the production of queens on a large scale. This would allow for the artificial splitting of colonies and contribute to conservation efforts in native bees.

Influence of HLA-DRB-1 alleles on the production of antibody against CSP, MSP-1, AMA-1, and DBP in Brazilian individuals naturally infected with Plasmodium vivax

We evaluated the influence of allelic frequency of the human leukocyte antigen (HLA) -DRB1 on the acquisition of antibody response against malaria sporozoite and merozoite peptides in patients with Plasmodium vivax malaria acquired in endemic areas of Brazil. IgG antibodies were detected by enzyme-linked immunosorbent assay against four peptides of circumsporozoite protein (CSP) (amino, carboxyl, and VK210 and VK247 repeats) and peptides of merozoite surface protein 1 (MSP-1), apical membrane antigen 1 (AMA-1), and Duffy-binding protein (DBP). We found an association between HLA-DR3 and HLA-DR5 alleles and lack of antibody response to CSP amino terminal, as well as an association between HILA-DR3 and the highest antibody response to MSP1 (Pv200L). In conclusion, we suggest a potential regulatory role of the H1A-DRB1 alleles in the production of antibodies to a conserved region of P. vivax CSP and MSP1 in Brazilian population exposed to malaria. (C) 2011 Elsevier B.V. All rights reserved.

Molecular characterization by amplified fragment length polymorphism and aflatoxin production of Aspergillus flavus isolated from freshly harvested peanut in Brazil

Brazil contributes substantially to the global peanut production, and the state of Sao Paulo is the largest producer in the country. Peanut crops can be contaminated by Aspergillus flavus strains producing aflatoxins, which are highly toxic and carcinogenic. Thus, the production of high-quality peanuts is crucial both for the commercial peanut industry and as a matter of public health. In this study, we used amplified fragment length polymorphism analysis (AFLP) to investigate the genetic variability among A. flavus strains isolated from fresh peanuts harvested in four different regions in the state of Sao Paulo, and to determine whether the molecular genetic profiles correlated with aflatoxin production or sclerotia formation. AFLP analysis generated 78 fragments ranging from 27 to 365 base pairs in length. Thirteen percent were not polymorphic. Genotyping identified twelve groups of A. flavus. On the basis of the polymorphisms identified, similarity between the isolates ranged from 37% to 100%. Of all isolates collected, 91.7% produced aflatoxins and 83.9% produced small sclerotia. Statistical analysis failed to suggest any relationship between the presence of sclerotia and mean levels of aflatoxins B-1 and B-2. Furthermore, a dendrogram based on AFLP data revealed substantial genetic variability among the A. flavus strains, but showed no correlation between dendrogram groups separated by molecular genetic features and production of aflatoxins B-1 or B-2 or the formation of sclerotia.

Production of Fructooligosaccharides by Aspergillus phoenicis Biofilm on Polyethylene as Inert Support

Aspergillus phoenicis biofilms on polyethylene as inert support were used to produce fructooligosaccharides (FOS) in media containing 25% (m/V) of sucrose as a carbon source. The maximum production of total FOS (122 mg/mL), with 68% of 1-kestose and 32% of nystose, was obtained in Khanna medium maintained at 30 degrees C for 48 h under orbital agitation (100 rpm). At high concentrations of sucrose (30%, m/V), the recovery of FOS was higher than that observed at a low concentration (5%, m/V). High levels of FOS (242 mg/mL) were also recovered when using the biofilm in sodium acetate buffer with high sucrose concentration (50%, m/V) for 10 h. When the dried biofilm was reused in a fresh culture medium, there was a recovery of approx. 13.7% of total FOS after 72 h of cultivation at 30 C, and 10% corresponded to 1-kestose. The biofilm morphology, analyzed by scanning electron microscope, revealed a noncompact mycelium structure, with unfilled spaces and channels present among the hyphae. The results obtained in this study show that A. phoenicis biofilms may find application for FOS production in a single-step fermentation process, which is cost-effective in terms of reusability, downstream processing and efficiency.

Production of nursing care in primary health care services

This descriptive and quantitative study aimed to characterize the production of nursing care in primary health care services in a region of the city of Ribeirao Preto, state of Sao Paulo, Brazil. The study sample comprised care actions delivered by nurses and registered in the HygiaWeb Information System, from 2006 to 2009. Statistical analysis was performed. Results showed that nursing care delivered by nurses accounted for 9.5 to 14.6% of total professional care provided by professionals. Eventual care actions were the most frequent. The concentration of programmatic care was higher for children, women, pregnant and postpartum women. In conclusion, the predominance of eventual care demonstrated that the health system has been focused on acute conditions. Little of nursing work has been directed at the achievement of comprehensiveness, considering the inexpressive share of longitudinal follow up in total care delivery. The expansion of nursing staff represents potential for care delivery to the population, but further qualification of nursing actions is needed.

Dry matter production of Tanzania grass as a function of agrometeorological variables

The objective of this work was to develop and validate linear regression models to estimate the production of dry matter by Tanzania grass (Megathyrsus maximus, cultivar Tanzania) as a function of agrometeorological variables. For this purpose, data on the growth of this forage grass from 2000 to 2005, under dry-field conditions in Sao Carlos, SP, Brazil, were correlated to the following climatic parameters: minimum and mean temperatures, degree-days, and potential and actual evapotranspiration. Simple linear regressions were performed between agrometeorological variables (independent) and the dry matter accumulation rate (dependent). The estimates were validated with independent data obtained in Sao Carlos and Piracicaba, SP, Brazil. The best statistical results in the development and validation of the models were obtained with the agrometeorological parameters that consider thermal and water availability effects together, such as actual evapotranspiration, accumulation of degree-days corrected by water availability, and the climatic growth index, based on average temperature, solar radiation, and water availability. These variables can be used in simulations and models to predict the production of Tanzania grass.

The production of critical-reflexive narratives and their effect on nursing students' portfolios

The objective of this study is to analyze the process of producing reflexive narratives on nursing students' portfolios. This qualitative study performed an analysis of the portfolios of the class discipline Health Promotion in Primary Education, taught in the fourth semester of the Nursing Licensure Course. Results showed an initial predominance of descriptive records, with the incipient approach of theoretical aspects associated with the aspects regarding their experience. Further, in the group and experience discussions, there were narratives containing more critical and reflexive elements, with justifications for the described actions and the relationships with the theoretical-practical aspects studied in the class and in the course. In conclusion, there is a process of producing critical-reflexive narratives in portfolios that could include a summarized description, using common sense and idealization which allows for including the differences and the theoretical review.

THE SCIENTIFIC PRODUCTION OF PSYCHOSOCIAL CARE CENTERS

The objective of this study was to present a panoramic view of the scientific production regarding Psychosocial Care Centers (CAPS). This literature review was performed using the LILACS, MEDLINE, and SciELO databases. Sixty-eight references were selected, most of which were journal articles (88.24%) and studies related to final graduate study essays (10.29%); 75% of the references found dating from 2003 were included. The following are highlighted among the most frequent objectives: the analysis and evaluation of the new proposal for mental health care, represented by Psychiatric Reform and by CAPS, and the analysis of mental health professionals and their expectations towards the services. The authors hope the present review will help find pathways and implications that lead to new studies and practices in the everyday work of health care services.

Oral Administration of Oleic or Linoleic Acids Modulates the Production of Inflammatory Mediators by Rat Macrophages

Oleic (OLA) and linoleic (LNA) acids are commonly consumed fatty acids and they can modulate the inflammatory response, in which macrophages play an important role. The aim of this study was to investigate the effects of these two fatty acids on the production of inflammatory mediators by macrophages. Rats received oral administration of water (control), OLA or LNA (0.22 g/kg body weight) daily for 10 days and peritoneal resident macrophages were then isolated. Subsequently, they were seeded in culture plates and the production of various inflammatory mediators was assessed. Oral administration with OLA decreased the production of IL-1 beta, IL-6 and CINC-2 alpha beta by resident macrophages and LNA decreased the production of IL-1 beta, IL-6 and VEGF in the absence of lipopolysaccharide (LPS), although it accelerated IL-1 beta release and decreased IL-10 synthesis when cells were stimulated with LPS. Neither fatty acid affected the production of superoxide anion, hydrogen peroxide, nitrite, TNF-alpha, PGE(2), LTB4 or 15(S)-HETE. Thus, OLA and LNA influence the production of several inflammatory mediators by macrophages.

Production of human factor VIII-FL in 293T cells using the bicistronic MGMT(P140K)-retroviral vector

Hemophilia A is the most common X-linked bleeding disorder; it is caused by deficiency of coagulation factor VIII (FVIII). Replacement therapy with rFVIII produced from human cell line is a major goal for treating hemophilia patients. We prepared a full-length recombinant FVIII (FVIII-FL), using the pMFG-P140K retroviral vector. The IRES DNA fragment was cloned upstream to the P140K gene, providing a 9.34-kb bicistronic vector. FVIII-FL cDNA was then cloned upstream to IRES, resulting in a 16.6-kb construct. In parallel, an eGFP control vector was generated, resulting in a 10.1-kb construct. The 293T cells were transfected with these constructs, generating the 293T-FVIII-FL/P140K and 293T-eGFP/P140K cell lines. In 293T-FVIII-FL/P140K cells, FVIII and P140K mRNAs levels were 4,410 (+/- 931.7)- and 295,400 (+/- 75,769)-fold higher than in virgin cells. In 293T-eGFP/P140K cells, the eGFP and P140K mRNAs levels were 1,501,000 (+/- 493,700)- and 308,000 (+/- 139,300)-fold higher than in virgin cells. The amount of FVIII-FL was 0.2 IU/mL and 45 ng/mL FVIII cells or 4.4 IU/mu g protein. These data demonstrate the efficacy of the bicistronic retroviral vector expressing FVIII-FL and MGMT(P140K), showing that it could be used for producing the FVIII-FL protein in a human cell line.

SCIENTIFIC LANGUAGE RHETORIC: FROM THE THEORETICAL BASIS TO THE PRODUCTION OF DIDACTIC MATERIAL FOR UNDERGRADUATE CHEMISTRY TEACHING

This work is part of a study that focused on analyzing the contributions of didactic activities related to scientific language rhetoric characteristics aimed at developing students' abilities to identify such characteristics in chemistry scientific texts and critical reading of those texts. In this study, we present the theoretical basis adopted to determine the scientific discourse characteristics and for the production of the didactic material used in those activities. Latour, Coracini and Campanario studies on persuasive rhetorical strategies present in scientific articles aided the production of such material.

Production of Human Antibody Fragments Binding to Melittin and Phospholipase A2 in Africanised Bee Venom: Minimising Venom Toxicity

The hybrid created from the crossbreeding of European and African bees, known as the Africanised bee, has provided numerous advantages for current beekeeping. However, this new species exhibits undesirable behaviours, such as colony defence instinct and a propensity to attack en masse, which can result in serious accidents. To date, there is no effective treatment for cases of Africanised bee envenomation. One promising technique for developing an efficient antivenom is the use of phage display technology, which enables the production of human antibodies, thus avoiding the complications of serum therapy, such as anaphylaxis and serum sickness. The aim of this study was to produce human monoclonal single-chain Fv (scFv) antibody fragments capable of inhibiting the toxic effects of Africanised bee venom. We conducted four rounds of selection of antibodies against the venom and three rounds of selection of antibodies against purified melittin. Three clones were selected and tested by enzyme-linked immunosorbent assay to verify their specificity for melittin and phospholipase A2. Two clones (C5 and C12) were specific for melittin, and one (A7) was specific for phospholipase A2. In a kinetic haemolytic assay, these clones were evaluated individually and in pairs. The A7-C12 combination had the best synergistic effect and was chosen to be used in the assays of myotoxicity inhibition and lethality. The A7-C12 combination inhibited the in vivo myotoxic effect of the venom and increased the survival of treated animals.

Adding value to the Brazilian sisal: acid hydrolysis of its pulp seeking production of sugars and materials

The present work is inserted into the broad context of the upgrading of lignocellulosic fibers. Sisal was chosen in the present study because more than 50% of the world's sisal is cultivated in Brazil, it has a short life cycle and its fiber has a high cellulose content. Specifically, in the present study, the subject addressed was the hydrolysis of the sisal pulp, using sulfuric acid as the catalyst. To assess the influence of parameters such as the concentration of the sulfuric acid and the temperature during this process, the pulp was hydrolyzed with various concentrations of sulfuric acid (30-50%) at 70 A degrees C and with 30% acid (v/v) at various temperatures (60-100 A degrees C). During hydrolysis, aliquots were withdrawn from the reaction media, and the solid (non-hydrolyzed pulp) was separated from the liquid (liquor) by filtering each aliquot. The sugar composition of the liquor was analyzed by HPLC, and the non-hydrolyzed pulps were characterized by viscometry (average molar mass), and X-ray diffraction (crystallinity). The results support the following conclusions: acid hydrolysis using 30% H2SO4 at 100 A degrees C can produce sisal microcrystalline cellulose and the conditions that led to the largest glucose yield and lowest decomposition rate were 50% H2SO4 at 70 A degrees C. In summary, the study of sisal pulp hydrolysis using concentrated acid showed that certain conditions are suitable for high recovery of xylose and good yield of glucose. Moreover, the unreacted cellulose can be targeted for different applications in bio-based materials. A kinetic study based on the glucose yield was performed for all reaction conditions using the kinetic model proposed by Saeman. The results showed that the model adjusted to all 30-35% H2SO4 reactions but not to greater concentrations of sulfuric acid. The present study is part of an ongoing research program, and the results reported here will be used as a comparison against the results obtained when using treated sisal pulp as the starting material.

Spray Congealing of Pharmaceuticals: Study on Production of Solid Dispersions Using Box-Behnken Design

This work aimed at evaluating the spray congealing method for the production of microparticles of carbamazepine combined with a polyoxylglyceride carrier. In addition, the influence of the spray congealing conditions on the improvement of drug solubility was investigated using a three-factor, three-level Box-Behnken design. The factors studied were the cooling air flow rate, atomizing pressure, and molten dispersion feed rate. Dependent variables were the yield, solubility, encapsulation efficiency, particle size, water activity, and flow properties. Statistical analysis showed that only the yield was affected by the factors studied. The characteristics of the microparticles were evaluated using X-ray powder diffraction, scanning electron microscopy, differential scanning calorimetry, and hot-stage microscopy. The results showed a spherical morphology and changes in the crystalline state of the drug. The microparticles were obtained with good yields and encapsulation efficiencies, which ranged from 50 to 80% and 99.5 to 112%, respectively. The average size of the microparticles ranged from 17.7 to 39.4 mu m, the water activities were always below 0.5, and flowability was good to moderate. Both the solubility and dissolution rate of carbamazepine from the spray congealed microparticles were remarkably improved. The carbamazepine solubility showed a threefold increase and dissolution profile showed a twofold increase after 60 min compared to the raw drug. The Box-Behnken fractional factorial design proved to be a powerful tool to identify the best conditions for the manufacture of solid dispersion microparticles by spray congealing.