Adoção da certificação leed em meios de hospedagem: esverdeando a hotelaria?

A pesquisa objetivou analisar o processo de adoção da certificação "Leadership in Energy and Environmental Design" (LEED) a partir dos estabelecimentos do setor hoteleiro que já a adotaram. Para sua concretização procedeu-se uma pesquisa bibliográfica, coleta de dados secundários em sites institucionais, periódicos e material documental, bem como de dados primários por meio de entrevistas semiestruturadas. Foram 21 entrevistados, sendo 02 do Green Building Council Brasil e 19 de meios de hospedagem (31% dos certificados). A análise deu-se por meio da análise de conteúdo com auxílio do software ATLAS.ti. Os resultados permitiram identificar a cronologia dos processos de certificação e o perfil das categorias hoteleiras que adotam o programa LEED. Além disso, as entrevistas possibilitaram a discussão das motivações iniciais de busca pela certificação, bem como as vantagens e os entraves percebidos quanto à sua adoção.

Radiative association of Ti and O atoms

Rate coefficients for the radiative association of titanium and oxygen atoms to form the titanium monoxide (TiO) molecule are estimated. The radiative association of Ti(F-3) and O(P-3) atoms is dominated by an approach along the C-3 Delta potential energy curve, accompanied by spontaneous emission into the X-3 Delta ground state of TiO. For temperatures ranging from 300-14 000 K, the total rate coefficients are found to vary from 4.76 x 10(-17) to 9.96 x 10(-17) cm(3) s(-1), respectively.

On the electrical conductivity of Ti-implanted alumina

Ion implantation of metal species into insulators provides a tool for the formation of thin, electrically conducting, surface layers with experimenter-controlled resistivity. High energy implantation of Pt and Ti into alumina accelerator components has been successfully employed to control high voltage surface breakdown in a number of cases. In the work described here we have carried out some basic investigations related to the origin of this phenomenon. By comparison of the results of alumina implanted with Ti at 75 keV with the results of prior investigations of polymers implanted with Pt at 49 eV and Au at 67 eV, we describe a physical model of the effect based on percolation theory and estimate the percolation parameters for the Ti-alumina composite. We estimate that the percolation dose threshold is about 4 x 10(16) cm(-2) and the maximum dose for which the system remains an insulator-conductor composite is about 10 x 10(16) cm(-2). The saturation electrical conductivity is estimated to be about 50 S/m. We conclude that the observed electrical conductivity properties of Ti-implanted alumina can be satisfactorily described by percolation theory. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.3697900]

Characterization of a new beta titanium alloy, Ti-12Mo-3Nb, for biomedical applications

In recent years, different beta titanium alloys have been developed for biomedical applications with a combination of mechanical properties including a low Young's modulus, high strength, fatigue resistance and good ductility with excellent corrosion resistance. From this perspective, a new metastable beta titanium Ti-12Mo-3Nb alloy was developed with the replacement of both vanadium and aluminum from the traditional Ti-6Al-4V alloy. This paper presents the microstructure, mechanical properties and corrosion resistance of the Ti-12Mo-3Nb alloy heat-treated at 950 degrees C for 1 h. The material was characterized by X-ray diffraction and by scanning electron microscopy. Tensile tests were carried out at room temperature. Corrosion tests were performed using Ringer's solution at 25 degrees C. The results showed that this alloy could potentially be used for biomedical purposes due to its good mechanical properties and spontaneous passivation. (c) 2011 Elsevier B.V. All rights reserved.

Instrução verbal: solicitar foco de atenção não garante sua adoção e melhor desempenho

The purposes of this study were to investigate a) the effect of redundant and non-redundant instruction on external focus of attention adoption, b) the effect of adopting an external focus of attention on performance in a front crawl swimming task, and c) the effect of redundancy in the wording of a verbal instruction on the above variables. 43 college students (m/f) aged 17 to 46 swam 25 m crawl at maximum speed, once under each of three conditions: without focus instruction (SF), following a focus instruction (CF) and a redundant focus instruction (CFR), in counterbalanced order. For focus adoption control, after completing the task participants were asked about what they had focused on while swimming. As a measure of performance, time and number of strokes were taken and the stroke index was calculated. The results showed that under redundant focus instruction (CFR) condition, 42 % failed to adopt the attentional focus as asked, and following focus (CF) instruction, 23 %. Under CF condition, the frequency of participants that adopted the focus was higher than of those who did not. Performance did not differ significantly among the three conditions (p>0,05). These findings stress the need of manipulation checks in attentional focus research, regarding both performance and motor learning efficiency, as well as the need for further investigation into the relation between instruction extension and performance.

Adoção suficientemente boa: experiência de um casal com filhos biológicos

A partir de um estudo de caso, aborda-se a experiência de adoção de uma criança de quatro meses de idade por um casal com três filhos biológicos. Os dados obtidos por entrevistas semiestruturadas mostraram que a parentalidade adotiva foi experienciada em meio a temores/fantasias de perda/roubo da criança adotada. Isso pode ser associado ao modo como foi realizada a adoção, sem os cuidados preconizados pelo Estatuto da Criança e do Adolescente e a nova lei de adoção. O processo de adoção figurou para os adotantes como fonte de intensa carga emocional, permeada por sentimentos ambivalentes que merecem atenção dos profissionais da Psicologia. Os resultados ilustram a necessidade de atenção psicossocial-jurídica a adotantes, adotado e família biológica do adotado.

Impacto dos modelos de referência e maturidade no gerenciamento de projetos: estudo exploratório em projetos de tecnologia da informação

Modelos de maturidade e modelos de referência em gerenciamento de projetos têm sido implantados de forma crescente na área de tecnologia da informação (TI). Este artigo tem por objetivo analisar o impacto do grau de maturidade organizacional em gerenciamento de projetos e o da adoção de modelos de referência no sucesso de projetos de TI. Foi adotada a abordagem de pesquisa quantitativa, com levantamento junto a 51 profissionais da área. Os resultados apontam para correlação positiva entre o grau de maturidade organizacional em gerenciamento de projetos e a satisfação das demandas dos stakeholders (principais interessados no projeto). Também foi constatada relação estatística positiva entre a adoção do PMBoK e o sucesso de projetos de TI, no que concerne ao atendimento dos requisitos e satisfação das demandas dos stakeholders.

O gerente de projetos de TI em organizações com níveis de maturidade diferenciados

A literatura sobre gestão de projetos mostra, de forma recorrente, a importância da figura do gerente no desempenho dos projetos. O presente artigo apresenta os resultados de um levantamento (survey) do papel do gerente de projetos de TI como elemento condicionante do desempenho desses projetos. Os resultados encontrados mostram que a relação do gerente de projetos com o desempenho dos projetos é alterada pelo nível de maturidade da organização executante em gestão de projetos. Nas organizações com menor maturidade existe uma relação muito mais forte do perfil do gerente com o desempenho dos projetos.Isso sugere que as organizações que conseguem estimular sua maturidade em gestão de projetos criam condições para que o desempenho de seus projetos fique menos dependente da ação individual dos gerentes.

Influence of the substitutional solute on the mechanical properties of Ti-Nb binary alloys for biomedical use

Titanium alloys are widely used in the manufacture of biomedical implants because they possess an excellent combination of physical properties and outstanding biocompatibility. Today, the most widely used alloy is Ti-6Al-4V, but some studies have reported adverse effects with the long-term presence of Al and V in the body, without mentioning that the elasticity modulus value of this alloy is far superior to the bone. Thus, there is a need to develop new Ti-based alloys without Al and V that have a lower modulus, greater biocompatibility, and similar mechanical strength. In this paper, we investigated the effect of Nb as a substitutional solute on the mechanical properties of Ti-Nb alloys, prepared in an arc-melting furnace and characterized by density, X-ray diffraction, optical microscopy, hardness and elasticity modulus measurements. The X-ray and microscopy measurements show a predominance of the α phase. The microhardness values showed a tendency to increase with the concentration of niobium in the alloy. Regarding the elasticity modulus, it was observed a nonlinear behavior with respect to the concentration of niobium. This behavior is associated with the presence of the α phase.

Dynamical Elastic Moduli of the Ti-13Nb-13Zr biomaterial alloy by mechanical spectroscopy

Dynamical Elastic Moduli of the Ti-13Nb-13Zr biomaterial alloy were obtained using the mechanical spectroscopy technique. The sample with heat treatment at 1170K for 30 minutes and water quenched with subsequent aging treatment at 670 K for 3 hours (TNZ + WQ + 670 K/3 h), was characterized through decay of free oscillations of the sample in the flexural vibration mode. The spectra of anelastic relaxation (internal friction and frequency) in the temperature range from 300 K to 625 K not revealed the presence of relaxation process. As shown in the literature, the hcp structure usually does not exhibit any relaxation due to the symmetry of the sites in the crystalline lattice, but if there is some relaxation, this only occurs in special cases such as low concentration of zirconium or saturation of the stoichiometric ratio of oxygen for zirconium. Dynamical elastic modulus obtained for TNZ + WQ + 670 K/3 h alloy was 87 GPa at room temperature, which is higher than the value for Ti-13Nb-13Zr alloy (64 GPa) of the literature. This increment may be related to the change of the proportion of α and β phases. Besides that, the presence of precipitates in the alloy after aging treatment hardens the material and reduces its ductility.

On Ti-18Si-6B and Ti-7.5Si-22.5B powder alloys prepared by high-energy ball milling and sintering

Recently, a new ternary phase was discovered in the Ti-Si-B system, located near the Ti6Si2B composition. The present study concerns the preparation of titanium alloys that contain such phase mixed with α-titanium and other intermetallic phases. High-purity powders were initially processed in a planetary ball-mill under argon atmosphere with Ti-18Si-6B and Ti-7.5Si-22.5B at. (%) initial compositions. Variation of parameters such as rotary speed, time, and ball diameters were adopted. The as-milled powders were pressureless sintered and hot pressed. Both the as-milled and sintered materials were characterized by X-ray diffraction, scanning electron microscopy and energy-dispersive spectrometry. Sintered samples have presented equilibrium structures formed mainly by the α-Ti+Ti6Si2B+Ti5Si3+TiB phases. Silicon and boron peaks disappear throughout the milling processes, as observed in the powder diffraction data. Furthermore, an iron contamination of up to 10 at. (%) is measured by X-ray spectroscopy analysis on some regions of the sintered samples. Density, hardness and tribological results for these two compositions are also presented here.