59 resultados para CNPQ::CIENCIAS AGRARIAS
Resumo:
On the national scene, soybean crop occupies a prominent position in cultivated area and volume production, being cultivated largely in the no tillage system. This system, due to the intense traffic of machines and implements on its surface has caused soil compaction problems, which has caused the yield loss of crops. In order to minimize this effect the seeder-drill uses the systems to opening the furrow by shank or the double disc type. The use of the shank has become commonplace for allowing the disruption of the compacted surface layer, however requires greater energy demand and may cause excessive tillage in areas where there is not observed high levels of compaction. Thus, this study aimed to evaluate the effects of furrowers mechanisms and levels of soil compacting on traction requirement by a seeder-drill and on the growing and productivity of soybean in an Oxisol texture clay, in a two growing seasons. The experimental design consisted of randomized blocks with split plots with the main plots composed of four levels of soil compaction (N0 – no tillage without additional compaction, N1, N2 and N3 – no tillage subjected to compaction through two, four and six passes with tractor, respectively) corresponding to densities of soil 1.16, 1.20, 1.22 and 1.26 g cm-3, and subplots by two furrowers mechanisms (shank and double disc) with four replicates. To evaluate the average, maximum and specific traction force requested by the seeder-drill, was used a load cell, with capacity of 50 kN and sensitivity of 2 mV V-1, coupled between the tractor and seeder-drill, whose data are stored in a datalogger system model CR800 of Campbell Scientific. In addition, were evaluated the bulk density, soil mechanical resistance to penetration, sowing depth, depth and groove width, soil area mobilized, emergence speed index, emergence operation, final plant stand, stem diameter, plant height, average number of seeds per pod, weight of 1,000 seeds, number of pods per plant and crop productivity. Data were subjected to analysis of variance, the mean of furrowers were compared by Tukey test (p≤0.05), while for the factor soil compaction, polynomial regression analysis was adopted, selected models by the criterion of greater R2 and significance (p≤0.05) of equation parameters. Regardless of the crop season, penetration resistance increase as soil compaction levels up to around 0.20 m deep, and bulk density influenced the sowing quality parameters, however, did not affect the crop yield. In the first season, there was a higher productivity with the use of the shank type. In the second crop season, the shank demanded greater energetic requirement with the increase of bulk density and opposite situation with the double disc. The locking of sowing lines allow better performance of the shank to break the compacted layer.
Resumo:
The strong selection pressure exerted by intensive use of glyphosate in cultivated areas has selected populations of the Rubiaceae weed species Borreria latifolia (Aubl.) K.Shum. (broadleaf buttonweed), Galianthe chodatiana (Standl.) E.L. Cabral (galiante) and Richardia brasiliensis Gomes (Brazilian pusley) with differential sensitivity to this herbicide in the South region of Brazil. The control of these weeds with herbicides is troublesome and signals the need to incorporate management practices of ruderal flora and crops, more sustainable and that results in more efficient control for long-term. Therefore, it is very important to expand the information about their biology and management. This study aimed: (a) select efficient methods to overcome dormancy of B. latifolia and G. chodatiana and determine how they influence the kinetics of seeds germination; (b) analyze the effects of temperature, irradiance, pH, aluminum and salinity on seed germination and initial growth of the B. latifolia, G. chodatiana e R. brasiliensis seedlings; (c) evaluate tolerance to glyphosate levels in biotypes of B. latifolia, G. chodatiana e R. brasiliensis through dose-response curves and compare two methods to evaluate herbicidal control; (d) and evaluated the effectiveness of alternative herbicides in pre-emergence and in early and late post-emergence of the three species. The treatment with KNO3 2%/3h + gibberellic acid 400 ppm resulted in higher percentage of G. chodatiana seed germination. This treatment and also the dry heat (60°C/30 min) + KNO3 2%/3h were more effective in overcoming dormancy of B. latifolia. G. chodatiana and R. brasiliensis tolerate lower temperatures during the germination process, while B. latifolia tolerate higher temperatures. B. latifolia and R. brasiliensis are positive photoblastic while G. chodatiana is indifferent to the photoperiod. B. latifolia shows higher germination and early development in pH 3, while G. chodatiana and R. brasiliensis prefer pH range between 5 and 7. B. latifolia and G. chodatiana were more tolerant to the aluminum during the germination process than R. brasiliensis. Low salt levels were sufficient to reduce the seed germination of the three species. Some biotypes of B. latifolia and R. brasiliensis showed medium-high glyphosate tolerance, not being controlled by higher doses than recommended. The G. chodatiana specie was not controlled with the highest dose used, showing a high glyphosate tolerance. The sulfentrazone, s-metolachlor and saflufenacil herbicides sprayed in pre-emergence showed high efficacy both on B. latifolia and R. brasiliensis, while chlorimuron-ethyl and diclosulan were effective only on R. brasiliensis. In early post-emergence the fomesafen, lactofem and flumioxazin herbicides efficiently controlled plants of all species, while bentazon showed high efficacy only on B. latifolia. Noteworthy the susceptibility of the G. chodatiana specie for applications in early post-emergence, because the control effectiveness and the number of effective herbicides are reduced with increasing the plant age. Many treatments with tank mix or sequencial applications with glyphosate, were effective in controlling B. latifolia and R. brasiliensis plants in advanced stage of development.
Resumo:
In the food industry, Salmonella sp. and other pathogens represent a major threat as potential causes of foodborne diseases. The Salmonella enterica serovar Heidelberg (SH) has a great importance to public health, being currently the most frequent serotype in the official control analyzes carried out in Brazil’s Southern. In this region are concentrated the largest poultry flocks, contributing over 60 % of Brazilian production of chicken meat. To help prevent and minimize infections by pathogenic bacteria, in addition to attend the standards of biosecurity in the field and good hygiene and sanitizing programs in the industry, there is the possibility to control directly on the poultry breeding. Use of organic acids added in the diet of the fowls has an antibacterial action. In the other hand, the use of probiotics has been shown to prevent enteric diseases. This dissertation was divided into two chapters and aimed to evaluate the quantitative and qualitative reduction of SH in broiler chickens. In the first chapter the aim was to collect information on the prevalence rate of SH strain in broiler chickens. This coefficient was 100 %, being a suitable method for determining the frequency of salmonellosis in broiler chickens. In the second chapter five treatments were evaluated (a positive control and four tests), in order to reduce the colonization of SH in broilers, using organic acids and probiotic during production phase. In SH count related to the colonization of the cecum at 28 days of age differences were observed (p<0,05) among treatments. The Treatment 2 showed a count of 41 most probable number of bacterial cells per gram (MPN/g) with lower counts when compared to the positive control (5.106 MPN/g) and treatment 1 (1.354 MPN/g). The evaluation index of infected birds, there was a difference between treatments. In treatment 2, and treatment 4 reduced 58,34 % and 25 % respectively the number of fowls infected with SH. There was no effect of treatments on the performance. Administration of organic acids and probiotic used in the treatment 2 proved to be an effective tool in the SH control in broilers at 28 days of age.
Resumo:
The objective of this study was to determine the antioxidant effect of essential oregano and alfavaca oil on the fatty acid profile of palm oil, used in industrial potato chips processing, aiming to reduce the oxidative state of palm oil. Essential oregano oil was obtained from industrial residues and commercial essential oregano oil was also acquired. The antioxidant activity of Oregano’s essential oil was taken by DPPH method. The DPPH analysis of the essential oil of oregano residue resulted in an IC50 of 797.04 mg.mL-1 and the essential oil of commercial oregano was 424.25 mg.mL-1. Regarding the content of total phenols, the essential oil of commercial oregano showed 0.167 ± 0.058 ug EAG.g-1. Based on these results, concentrations of 50, 100 e 150ug.g-1 of commercial oregano essential oil was added to palm oil and the fatty acid profile was determined by gas cromatography. Analysis were done with palm oil without being used in frying processes and without added essential oil, as well as with the different essential oil concentrations submitted at three frying processes at one single day. In the second part of the project, the effect of oreganos’s comercial essential oil compared to alfavacão essential oil, at the concentration of 100ug.g-1 in palm oil, and submitted to three frying processes during eleven cycles, was studied. The lipid profile was similar to that described in the literature, which an increase in the number of frying times caused a polyunsaturated fatty acids decrease and, therefore, a proportional increase in saturated fatty acids. It was noted an increase in the amounts of total saturated fatty acids from 43.36% (control) to 43.60% (palm oil with essential oil after 11 frying cycles at the concentration of 100ug.g-1). This fact proves that during the frying process, there is an increase in the rate of formation of saturated fatty acids. However, the addition of oregano essential oil did not provide significant change in the fatty acids of palm oil used in frying process of potato chips. The addition of oregano essential oil in a concentration of 100 ug./mL-1 until the third frying cycle showed a reduction effect of trans fatty acid formation. Although, during 11 frying cycles it was not noticed the essential oil effect under trans fatty acid formation. It can be suggested that this factor may be correlated to the frying time, which may not have been sufficient for significant formation of saturated and trans compounds.
Resumo:
The current scenario of the Brazilian poultry production is defined by high productivity motivated by exports to markets with elevated levels of sanitary requirement. The work aimed to evaluate the efficacy of chlorinated compounds (chlorine dioxide, dichloro and trichloro) and organic acids (citric, lactic and peracetic acids) in reducing the contamination of poultry by Salmonella spp., mesophiles and enterobacteriaceae. Were isolated 102 strains Salmonella spp. poultry carcass from June to September 2014. Strains were identified by PCR. Was determined the minimum inhibitory concentration (MIC) of antimicrobial compounds for the standard strains of S. Typhimurium, S. Enteritidis and S. Heidelberg. MIC of lactic acid and peracetic acid (20 to 10 g/L) was applied in strains of Salmonella spp. isolated from the slaughter. The MIC of the compounds lactic acid and sodium dichloro was applied in contaminated chiller water with Salmonella (109 CFU/mL) and this was determined Salmonella count in water. Thighs and drumsticks poultry were contaminated with S. Heidelberg (109 UFC/mL) and were applied dichloro (60 mg/L), lactic acid (20 g/L) and sodium hypochlorite (5,0 and 0,5 mg/L) compounds. In the identification by PCR, 93,1% of the strains were identified as Salmonella. For sodium dichloro the MIC was 60 mg/L for 15 minutes to S. Heidelberg and 60 mg/L for 20 minutes for S. Enteritidis. Lactic acid presented MIC of the 5 g/L for 10 minutes to S. Enteritidis 10 g/L for 15 minutes to S. Typhimurium and 20 g/L for 20 minutes to S. Heidelberg. For peracetic acid, MICs were 10 g/L for 10 minutes to S. Typhimurium and S. Heidelberg and 10 g/L for 20 minutes to S. Enteritidis. To citric acid, MICs were 10 g/L for 10 minutes to S. Typhimurium and S. Enteritidis and 25 g/L for 20 minutes to S. Heidelberg. In the isolated Salmonella strains, lactic acid inhibited 97,89% of the strains and peracetic inhibited 100% of the strains. In contaminated chiller water, the compounds reduced the growth of standards strains. When applied to contaminated poultry meat, there was a reduction of Salmonella spp. 1,06 log10 CFU/g relative to the positive control with the use of sodium hypochlorite at 5,0 mg/L, 0,97 log10 CFU/g with dichloro and 0,56 log10 CFU/g with sodium hypochlorite 0,5 mg/L. For mesophiles reduction observed was 0,90 log10 CFU/g relative to the positive control with the use of sodium hypochlorite at 5,0 mg/L, 0,83 log10 CFU/g with dichloro and there isn´t reduction with hypochlorite with sodium 0,5 mg/L. For enterobacteriaceae reduction was 1,0 log10 CFU/g relative to the positive control with the use of sodium hypochlorite at 5,0 mg/L, 0,79 log10 CFU/g with dichloro and 0,22 log10 CFU/g with sodium hypochlorite at 0,5 mg/L. Lactic acid inhibit growth of the microorganisms tested. The data supports the discussions to regulate the use of the technology coadjuvants in the slaughter of poultry.
Resumo:
Soybean plays an important role in the Brazilian agriculture being one of the products most exported by the country. Its yield may be affected by diseases such as white mold, caused by the fungus Sclerotinia sclerotiorum Lib. de Bary, which, under favorable field conditions prevents the crop of expressing all its productive potential. The fungus is cosmopolitan and infects more than 400 species of plants. This disease is difficult to control, and the use of chemicals has not been sufficient to avoid significant losses, thus, this products are expensive and may cause environmental damage. Alternative methods, such as foliar fertilizers based on potassium phosphite, can also be used in the management of this disease. In this context, this work aimed to study different sources of potassium phosphite and its effects in the control of white mold in soybeans, as well as the time of application in culture, its action in inducing plants defense responses and/or its influence over the seeds quality. The effect of phosphites, over the pathogen, was evaluated in vitro, on mycelial inhibition, the mass of dry mycelium and germination of sclerotia. In all tests, the following phosphites were utilized: Phosphite A (P2O5-40%; K2O-20% - 1 L/ha); Phosphite B (P2O5-40%; K2O-28% - 1 L/ha); Phosphite C (P2O5-40%; K2O-20% - 1 L/ha) e Phosphite D (P2O5-30%; K2O-20% - 2,4 L/ha). At the induction of resistance tests were evaluated the synthesis of phytoalexin in soybean cotyledons and the enzymes FAL and POX evaluated in seedlings in growing chamber, sprayed with phosphites and the fungicide fluazinam. Field experiment was carried out at Coronel Domingos Soares-PR, in the 2012/2013 season, in an area with natural infestation of the pathogen. Soybean cultivar BMX Active was no-till seeded with 0,5m between rows. The experimental was laid out as a factorial 5 x 4 scheme (treatment x application time). Phosphites sources were used, as described above, and water was sprayed in the control treatment. Treatments were applied at four different growth stages: V4, V4 + R1, R1 and R2 at the rates recommended by the manufacturer. Soybean yield components and seeds and health and physiological quality were evaluated after harvesting. None of the tested phosphites affected mycelial growth and sclerotia germination or influenced phytoalexin synthesis. Phosphites C and D stood out due to an increasing in the phenylalanine ammonia-lyase activity 48 hours after its inoculation. These same products also induced the synthesis and peroxidases and phosphite C kept the levels of this enzyme elevated up to 72 hours after inoculation. At the field trials, phosphites C and D stood out in the control of white mold. There was no significant interaction of potassium phosphite on physiological and sanitary quality of the seeds.
Resumo:
The animal trampling favors the soil compaction process in sheep raising and crop production integrated systems. This compression has negative effects, hindering the development of roots, the availability of nutrients, water and aeration, causing production losses, making it essential for the assessment of soil physical attributes for monitoring soil quality. Soil organic matter can be used to assess the quality of the soil, due to its relationship with the chemical, physical and biological soil properties. Conservation management system with tillage, along with systems integration between crops and livestock are being used to maintain and even increase the levels of soil organic matter. For that, a field experiment was carried out over a Oxisol clayey Alic in Guarapuava, PR, from de 2006 one. experiment sheep raising and crop production integrated systems The climate classified as Cfb .. The study was to evaluate the soil physical properties and quantify the stock of soil organic carbon and its compartmentalization in system integration crop - livestock with sheep under four nitrogen rates (0, 75, 150 and 225 kg ha-1) in the winter pasture, formed by the consortium oat (Avena strigosa) and ryegrass (Lolium multiflorum) and the effect of grazing (with and without). The soil samples blades density evaluations, total porosity, macro and micro, aggregation and carbon stocks were held in two phases: Phase livestock (after removal of the animals of the area) and phase crop (after maize cultivation). The collection of soil samples were carried out in layers of 0-0.5, 0.05-0.10, 0.10-0.20 and m. Data were subjected to analysis of variance and the hypotheses tested by the F test (p <0.05). For the quantitative effect data regression and the qualitative effect used the test medium. In non-significant regressions used the average and standard deviation treatments. The animal trampling caused an increase in bulk density in the 0.10-0.20 m layer. The dose of 225 kg N ha-1 in winter pasture increased total soil porosity at 8% compared to dose 0 kg N ha-1 in the crop stage. The grazing had no effect on soil macroporosity. GMD of aggregates in the phase after grazing the surface layer was damaged by grazing. Nitrogen rates used in the winter pasture and grazing not influence the total organic carbon stocks. The TOC is not influenced by nitrogen fertilization on grassland. The grazing increases the stock of POC in the 0.10-0.20 m layer livestock phase and cause the stock of POC in the 0-0.5 m layer in the crop stage. The MAC is not influenced by N rates applied in the pasture or by grazing.
Resumo:
Brazil is the third largest producer and exporter of turkey meat, especially in Paraná state, with the largest production volume. In worldwide the animal welfare is a prerequisite for food quality of animal origin, especially in Europe. The Regulation of European Community No 1099/2009 provides requirements for poultry stunning that associate with animal welfare as a means to minimize the pain and suffering from the slaughter. Improper application of callousness should produce low-quality meat, and significant industry losses. This Research aimed to evaluate the impacts on the quality of meat from turkeys, applying electrical stunning parameters established in the Regulation No 1099/2009 of the Council of 24 September 2009. Was applied an outline with 8 tests set equidistantly to frequency, and set parameters for current and voltage, and a control test. Were conducted qualitative assessments of hematoms and bruises / fractures in carcasses, hematoms, blood splashed and bleeding in turkey breast, and quantitative pH, color (L *), water holding capacity and shear force in turkey breast. The individual assessments showed no significant difference (p>0,05). In multivariate cluster analysis was the formation of two distinct groups: group 1 - 50 Hz to 200 Hz (low frequency) and group 2 - 633 Hz to 1500 Hz (high frequency), which showed significant difference (p= 0,016). In principal component analysis multivariate, the group 1 tend to have a higher incidence of bruising, blood splashed, bleeding and water holding capacity in breast turkeys, and bruises / fractures and hematoms on carcasses. The Group 2 tends to have a lower incidence of these parameters, and higher pH values, shear force and color (L *). Positive correlation was obtained for the parameters pH and shear force (r= 0.7506, p=0.0198); bleeding and splashed blood (r= 0.8811, p= 0.0017), and negative correlation to color (L*) and splashed blood on breast (r= -0.7889; p= 0.0115); breast hematoms and shear force (r= -0.7844; p= 0.0123). It has been observed that at lower frequencies stunning tends to have higher incidence of defects in the carcasses and turkey breast. The use of high frequencies in stunning, create smaller quantity of trimming, and an increase in turkey breast volume produced, with a financial gain of approximately R$250,000.00 / year. Moreover, there is no need increase the workers to do the trimming tasks and, therefore, higher financial results for companies. Therefore, we recommend the use of high frequencies in the stunning of turkeys.
Resumo:
The use of inputs containing phosphites have been presenting results in many studies, taking on importance to the control of diseases in some cultures and demonstrating the resistance induction in seedlings, with ability to activate defense mechanisms, conferring protection to plants against microorganisms. The soybean crop is recognized for its importance in providing grains and derivatives for human consumption, animal, production of biofuels, pharmaceuticals, among others. Positive results obtained through studies based on resistance inducers in some cultures arouse the interest for further study. The objective of this study was to evaluate the effect of potassium phosphites on the resistance induction and treatment of soybean seeds. Therefore were conducted four laboratory studies at the Federal Technological University of Paraná, Campus of Dois Vizinhos. In the first study it was evaluated the quality attributes of the seeds and the resistance induction as seed treatment. Then it was verified that phosphites have action upon the seedlings metabolism in due to seed treatment, having the phosphite Reforce® contributed to seed quality attributes and phosphites FitofosK® and Fitofos K Plus® induced the resistance increasing the activity of β-1,3-glucanase. In the second study it was evaluated the the resistance induction in soybean cotyledons, in which the phosphites demonstrated induction potential of phytoalexin gliceolin. In the third study It was evaluated the soybean seed health treated with potassium phosphites.. it was observed that the phosphites reduced the incidence of many fungi on seeds, especially of storage fungi like Aspergillus sp. and Fusarium semitectum. In the fourth study it was evaluated the in vitro effect of potassium phosphites on pathogenic fungi of the culture. And it was found direct action of phosphites on the mycelial growth of Fusarium semitectum, Pythium sp. and Sclerotinia sclerotiorum. Based on these results, we concluded that potassium phosphites have potential in seeds treatment, as resistance inducer and on in vitro control of phytopathogens.
Resumo:
In the industrial production of soluble coffee, huge amounts of extracted coffee residues are generated; onaverage, for eachtonne of green coffee extracted, 480 kg of coffee ground waste is produced. This is a solid residue currently used to generate energy at the steam boilers from the soluble coffee industry. Some is also used or as fertilizer on agriculture fields. Seeking a better end use, the work reported here aimed to study the viability of hydrolyzing the coffee ground residue for the production of carbohydrates. Hydrolysis was undertaken with hydrochloric acid at different temperatures and pressures, using a water bath or autoclave.An enzymatic hydrolysis with Viscozyme Lwas developed using Whatman filter paper No1 and the optimal conditions were determined using a rotational central composite experimental design (DCCR).The best conditions to hydrolyze filter paper cellulose were 50 FBG (Fungal β-glucanase) of Viscozyme L at pH 4.0 for 1.0 h and 45 ºC. The ground coffee was hydrolyzed under the same conditions as described above for filter paper, however this enzymatic hydrolysis was not efficient. A combination of enzymatic hydrolysis as a pre-treatment for the ground coffee followed by acid hydrolysis using HCl conducted in an autoclave (120 C for 2.0 h) resulted in higher production of glucose as analyzed by HPLC. Another end use of the ground coffee evaluated was as source of substrate in the culture medium to grow Botryosphaeria rhodina MAMB-05 to produce the enzymes laccase and cellulase. Highest enzyme titres obtained were with 8% (w/v) coffee grounds to which was added a minimum salts medium(Vogel), under agitation conditions (180 rpm) at 28ºC. The phenolic compounds present in the coffee grounds appear to have induced laccase by Botryosphaeria rhodina.
Resumo:
Sodium is an essential nutrient with important functions in the organism, however, its ingestion in excess may cause various health problems such as arterial hypertension, brain diseases, heart failure and chronic renal failure. In this context, the present study proposes to prepare Minas Padrão cheese with different contents of sodium with the objective of evaluating the effect of the addition of potassium chloride in sensory characteristics and hysicochemical properties, as well as in the proximal composition and in microbiological quality. The cheeses were elaborate in concentrations of 100% of NaCl (C), 80% of NaCl + 20% of KCl (T1), 60% of NaCl + 40% of KCl (T2), 40% of NaCl + 60% of KCl (T3) and 20% of NaCl + 80% of KCl (T4) and stored for 20 days at 10 ºC. The proximal composition and physicochemical was based on the determination of moisture content, fat, protein, ash, chloride, sodium, potassium, titratable acidity and pH of all treatments after 20 days of storage. The microbiological quality of the samples was monitored through the count of Total Coliforms and Escherichia coli, Staphylococcus aureus, Salmonella spp., mold and yeast in the first and fifteenth day of storage. The sensorial characterization was performed by the technique of Free Profile choice. The results showed that the replacement of sodium chloride by potassium in the Minas Padrão cheese in concentration higher than 40% presented significantly higher moisture contents. Cheese with a reduction greater than 60% of sodium obtained significantly effect in the titratable acidity, presenting higher values compared to the other treatments. The cheese with 20% of salt replacement did not differ statistically in relation to the control. When the proportion of substituent was increased, a significant reduction of the sodium content of up to 73% was observed. As the sodium was replaced by potassium in cheese, the potassium content increased significantly, stablishing a reduction of 82% in relation to the control. There was no effect to sodium substitution by potassium in fat, protein, ash and chlorides, as well as the pH values. The microbiological results were in accordance with the current legislation, therefore suitable to be eaten. According to the Free Profile Choice technique it was observed that the control C cheese (100% of NaCl) showed results very close to the other treatments, differing only in flavor attributes. The replacement of sodium by potassium in proportions of 20% contributed to a bitter taste detected by the tasters. Whereas, the appearance, flavor and texture attributes showed no significant differences compared to the Minas Padrão cheese.
Resumo:
An effective hygiene and sanitation inspection of meat and meat products is essential for its production and commercialization. For this reason, the national and international standards responsible for these products quality control employs microbiological analyses methods as quality control tools. In December of 2012, it was included in the Ministério da Agricultura Pecuária e Abastecimento (MAPA) website, a Microbiological Scope of food and water, which presents the replacement of some methods proposed by the Normative Instruction 62. Some of these methodologies are considered rapid, practical and convenient. However, other methodologies were still replaced by conventional ones, which presents disadvantages as incorrect interpretations of the microorganism phenotypical and biochemical characteristics, leading to the misinterpretation of test results. Therefore, the objective of this study is to develop a comprehensive, practical and illustrative guidebook of microbiological analysis for in natura poultry cuts. The methods addressed in this guide are the official standards analysis required by the poultry cuts legislation, which are the Escherichia coli count, the thermotolerant coliforms count, the aerobic plate count and the detection of Salmonella spp. The approached methodologies for these analysis will be the AOAC 998.08, the Normative Instruction 62 and the ISO 4833-1:2013 and ISO 6579:2002, respectively. In these events, it is expected to obtain an enlightening and approved guidebook evaluated by laboratory technicians, which will help reduce the analytical subjectivity leading to a more reliable interpretation of the test results.
Resumo:
In order to add value to soybens crops, and hence the marketing, medium and large producers have been using precision agriculture techniques (PA), as the Remote Sensing, Geographic Information Systems (GIS) and positioning satellite, to assist the management of crops. Thus, given the economic relevance of that culture to the southwest of Paraná State and Brazil, scientific studies to increase their productivity and profitability are of main importance. The objective of this study was to evaluate the correlation between the chemical soil properties and soybean yield for each estimated parameter of semivariogram (range, nugget and level effect), and the deployment of these correlations in direct and indirect effects, aiming to improve the mapping process of spatial variability of soil chemical properties for use in PA. The hypothesis is that not all attributes of soil used to estimate the semivariogram parameters has a direct effect on productivity, and that even in groups of plants within a larger area it is possible to estimate the parameters of the semivariograms. The experiment was conducted in a commercial area of 19.7 ha, located in the city of Pato Branco - PR, central geographic coordinates 26º 11 '35 "South, 52 43' 05" West longitude, and average altitude of 780 m. The area is planted with soybeans for over 30 years, currently being adopted to cultivate Brasmax Target RR - Don Mario 5.9i, with row spacing of 0.50 m and 13 plants m-1, totaling 260,000 plants ha-1. For georeferencing of the area of study and sampling points was used a couple of topographic ProMarkTM3 receptors, making a relative positioning to obtain the georeferenced coordinates. To collect data (chemical analyzes of soil and crop yield) were sampled 10 blocks in the experimental area, each with an area of 20 m2 (20 meters long x 1 meter wide) containing two spaced adjacent rows of 0.5 m. Each block was divided into 20 portions of 1 m2, and from each were collected four subsamples at a distance of 0.5 m in relation to the lines of blocks, making up a sample depth for 0-10 cm a sample to 10-20 cm for each plot, totaling 200 samples for each depth. The soybean crop was performed on the blocks depending on maturity, and in each block was considered a bundle at each meter. In the data analysis, it was performed a diagnosis of multicollinearity, and subsequently a path analysis of the main variables according to the explanatory variables (range of chemical attributes: pH, K, P, Ca, etc.). The results obtained by the path analysis of the parameters of the semivariogram of soil chemical properties, indicated that only the Fe, Mg, Mn, organic matter (OM), P and Saturation by bases (SB) exerted direct and indirect effects on soybean productivity, although they have not presented spatial variability, indicating that the distribution of blocks in the area was unable to identify the spatial dependence of these elements, making it impossible to draw up maps of the chemical attributes for use in PA.
Resumo:
The application of roasted coffee oil directly on freeze dried soluble coffee is used to minimize the formation of fine poder which adhere on the glass packaging, which results in a negative visual appearance, as well as contributes to the aromatic impact when opening the packaging. The coffee oil is considered a high cost product obtained from Arabica coffee beans, previosly selected and roasted, by mechanical press. In Brazil the coffee culture and marketing results in the selection of the beans by type of defects and beverage, the volume of exportation works with types of coffee beans with low quantity of defects resulting in a large volume of defective coffee beans trading on the domestic market. Nevertheless, coffees which present defective grains like green, black-green beans present differences in the final flavor of the roasted coffees. The aim of this study was to evaluate the chemical composition of the oils extracted from grains classified as normal, green and black-green, at natural and roasted conditions. The oil was obtained by cold extraction using solvents of different polarities, and yield was calculated as well as its fatty acid composition. The oil of the roasted defective coffee grains was also used to prepare drinks of lyophilized soluble coffee in order to verify if jugdes were able to differenciate the sensory caracteristics of the beverages, in comparison to the product prepared using commercial oil obtained by mechanical pressing. Samples of oil obtained from defective grains showed similar extraction yields compared to hot extraction. Cromatographs of oils of the deffective grains did not showed differences compared to normal grains. In relation to the sensory analysis of the soluble coffee beverages, it was verified that when applying oils of light roasted black-green beans or oils of medium and dark roasted green beans obtained with rapid process, judges had more difficulties to distinguish differences between samples. Economic viability demonstrated that with the actual prices of the coffee beans, the use of defective beans could reduce in 64% the costs of the raw beans.
Resumo:
The use of biopolymers that help to fix pesticides efficiently and degrade easily without harming the environment, and still improve the physiological performance of field soybean seed may bring contributions to the soybean yield. This study aimed to evaluate the effect of cassava starch polymers (AM), sodium alginate (ALG) and polyvinyl alcohol (PVOH), in the concentrations 2, 4 and 6 g / 100 ml of solution, in the physiological attributes of seeds soy, seed speed soaking and performance of soybean seeds after three months of storage. The soybean variety used was the NK 7059 RR. The experimental design used for the three studies was a factorial with 48 experimental units: 3 polymers (AM, ALG and PVOH), 4 different concentrations (0%, 2%, 4% and 6%), with four replications, in a completely randomized design. It was observed the level of significance of the factors and their interactions, applying the test F. The polymers were evaluated by the Tukey test at 5% probability, and the concentrations were evaluated by polynomial regression. The witness obtained better results for most variables studied. Among the polymers, the best coating was observed PVOH because it was the less viscous polymer and visually not served as a substrate for microorganisms. However, also, satisfactory results were obtained for the AM and ALG polymers at a concentration of 2%. There was not interference of the polymers studied with regard to reduction of imbibition rate of soybean seeds. The hydrophilicity of polymers, mainly the AM and ALG accelerated soaking seeds harming germination at concentrations 4% and 6%. In general, the higher the concentration of polymers tended to worse results.