Gold nanoresistors with near-constant resistivity in the cryogenic-to-room temperature range

Using a multiple plasma deposition-annealing (MDA) technique, we have fabricated an Au nanoisland-based thin film nanoresistor with a very low temperature coefficient of electrical resistivity in a cryogenic-to-room temperature range of 10 to 300 K. The nanoislanded gold film was deposited on a SiO2/Si wafer (500 nm SiO2 thickness) between two 300 nm thick Au electrodes which were separated by 100 m. A sophisticated selection of the thickness of the nanoislanded gold film, the annealing temperature, as well as the number of deposition/annealing cycles resulted in the fabrication of a nanoresistor with a temperature coefficient of electrical resistivity of 2.1 × 10-3 K-1 and the resistivity deviation not exceeding 2% in a cryogenic-to-room temperature range. We have found that the constant resistivity regime of the nanoisland-based thin film nanoresistor corresponds to a minimized nanoisland activation energy (approximately 0.3 meV). This energy can be minimized by reducing the nearest neighbor distance and increasing the size of the Au nanoislands in the optimized nanoresistor structure. It is shown that the constant resistivity nanoresistor operates in the regime where the thermally activated electron tunneling is compensated by the negative temperature dependence of the metallic-type conductivity of nanoislands. Our results are relevant to the development of commercially viable methods of nanoresistor production for various nanoelectronics-based devices. The proposed MDA technique also provides the opportunity to fabricate large arrays of metallic nanoparticles with controllable size, shapes and inter-nanoparticle gaps.

How do Australasian hospitals identify and manage malnutrition in their acute care wards?

One aim of the Australasian Nutrition Care Day Survey was to explore nutrition care practices in acute care hospital wards across Australia and New Zealand. Managers of Dietetic departments completed a questionnaire regarding ward nutrition care practices. Overall, 370 wards from 56 hospitals participated. The median ward size was 28 beds (range: 8–60 beds). Although there was a wide variation in full-time equivalent availability of dietitians (median: 0.3; range: 0–1.4), their involvement in providing nutrition care across ward specialities was signifi cantly higher than other staff members (χ2, p < 0.01). Feeding assistance, available in 89% of the wards, was provided mainly by nursing staff and family members (χ2, p < 0.01). Protected meal times were implemented in 5% (n = 18) of the wards. Fifty-three percent of the wards (n = 192) weighed patients on request and 40% (n = 148) on admission. Routine malnutrition screening was conducted in 63% (n = 232) of the wards and 79% (n = 184) of these wards used the Malnutrition Screening Tool, 16% (n = 37) the Malnutrition Universal Screening Tool, and 5% (n = 11) other tools. Nutrition rescreening was routinely conducted in 20% of the wards. Among wards that implemented nutrition screening, 41% (n = 100) routinely referred patients “at risk” of malnutrition to dietitians as part of their standard protocol for malnutrition management. Results of this study provide new knowledge regarding current nutrition care practice, highlight gaps in existing practice, and can be used to inform improved nutrition care in acute care wards across Australia and New Zealand.

Antecedents of consumer brand loyalty in the Chilean wine industry

The wine industry has become fiercely competitive worldwide, and consumers are increasingly exposed to a wider range of wines in retail outlets. Therefore, wineries need to develop and build consumer loyalty toward their brands. The authors empirically test a model of wine brand loyalty in a Latin American context which considers wine brand trust, brand satisfaction, wine knowledge and wine experience as antecedents. Hypotheses are tested with structural equation modeling (SEM). Findings show that wine experience is positively related to brand trust and brand satisfaction. In addition, results show that consumer satisfaction with a wine brand is the strongest driver of brand loyalty.

High performance all-carbon thin film supercapacitors

We fabricated high performance supercapacitors by using all carbon electrodes, with volume energy in the order of 10−3 Whcm−3, comparable to Li-ion batteries, and power densities in the range of 10 Wcm−3, better than laser-scribed-graphene supercapacitors. All-carbon supercapacitor electrodes are made by solution processing and filtering electrochemically-exfoliated graphene sheets mixed with clusters of spontaneously entangled multiwall carbon nanotubes. We maximize the capacitance by using a 1:1 weight ratio of graphene to multi-wall carbon nanotubes and by controlling their packing in the electrode film so as to maximize accessible surface and further enhance the charge collection. This electrode is transferred onto a plastic-paper-supported double-wall carbon nanotube film used as current collector. These all-carbon thin films are combined with plastic paper and gelled electrolyte to produce solid-state bendable thin film supercapacitors. We assembled supercapacitor cells in series in a planar configuration to increase the operating voltage and find that the shape of our supercapacitor film strongly affects its capacitance. An in-line superposition of rectangular sheets is superior to a cross superposition in maintaining high capacitance when subject to fast charge/discharge cycles. The effect is explained by addressing the mechanism of ion diffusion into stacked graphene sheets.

The inside story: A survey of social work students' supervision and learning opportunities on placement

Practice learning accounts for half of the content of the bachelor of social work degree course requirements in Northern Ireland in their field education programmes and share a professional and ethical responsibility with practice teachers to provide appropriate learning environments to prepare students as competent and professional practitioners. The accreditation standards for practice learning require the placement to provide students with regular supervision and exposure to a range of learning strategies, but there is little research that actually identifies the types of placements offering this learning and the key activities provided. This paper builds on an Australian study and surveys social work students in two programmes in Northern Ireland about their exposure to a range of learning activities, how frequently they were provided and how it compares to what is required by the Northern Ireland practice standards. The results indicated that, although most students were satisfied with the supervision and support they received during their placement, the frequency of supervision and type of learning activities varied according to different settings, year levels and who provided the learning opportunities.

Particle number and mass emission factors from combustion of wood samples collected from Queensland forest

Knowledge of particle emission characteristics associated with forest fires and in general, biomass burning, is becoming increasingly important due to the impact of these emissions on human health. Of particular importance is developing a better understanding of the size distribution of particles generated from forest combustion under different environmental conditions, as well as provision of emission factors for different particle size ranges. This study was aimed at quantifying particle emission factors from four types of wood found in South East Queensland forests: Spotted Gum (Corymbia citriodora), Red Gum (Eucalypt tereticornis), Blood Gum (Eucalypt intermedia), and Iron bark (Eucalypt decorticans); under controlled laboratory conditions. The experimental set up included a modified commercial stove connected to a dilution system designed for the conditions of the study. Measurements of particle number size distribution and concentration resulting from the burning of woods with a relatively homogenous moisture content (in the range of 15 to 26 %) and for different rates of burning were performed using a TSI Scanning Mobility Particle Sizer (SMPS) in the size range from 10 to 600 nm and a TSI Dust Trak for PM2.5. The results of the study in terms of the relationship between particle number size distribution and different condition of burning for different species show that particle number emission factors and PM2.5 mass emission factors depend on the type of wood and the burning rate; fast burning or slow burning. The average particle number emission factors for fast burning conditions are in the range of 3.3 x 1015 to 5.7 x 1015 particles/kg, and for PM2.5 are in the range of 139 to 217 mg/kg.

Application of bag sampling technique for particle size distribution measurements

Bag sampling techniques can be used to temporarily store an aerosol and therefore provide sufficient time to utilize sensitive but slow instrumental techniques for recording detailed particle size distributions. Laboratory based assessment of the method were conducted to examine size dependant deposition loss coefficients for aerosols held in VelostatTM bags conforming to a horizontal cylindrical geometry. Deposition losses of NaCl particles in the range of 10 nm to 160 nm were analysed in relation to the bag size, storage time, and sampling flow rate. Results of this study suggest that the bag sampling method is most useful for moderately short sampling periods of about 5 minutes.

Groundwater flow model of the Logan river alluvial aquifer system Josephville, South East Queensland

The study focuses on an alluvial plain situated within a large meander of the Logan River at Josephville near Beaudesert which supports a factory that processes gelatine. The plant draws water from on site bores, as well as the Logan River, for its production processes and produces approximately 1.5 ML per day (Douglas Partners, 2004) of waste water containing high levels of dissolved ions. At present a series of treatment ponds are used to aerate the waste water reducing the level of organic matter; the water is then used to irrigate grazing land around the site. Within the study the hydrogeology is investigated, a conceptual groundwater model is produced and a numerical groundwater flow model is developed from this. On the site are several bores that access groundwater, plus a network of monitoring bores. Assessment of drilling logs shows the area is formed from a mixture of poorly sorted Quaternary alluvial sediments with a laterally continuous aquifer comprised of coarse sands and fine gravels that is in contact with the river. This aquifer occurs at a depth of between 11 and 15 metres and is overlain by a heterogeneous mixture of silts, sands and clays. The study investigates the degree of interaction between the river and the groundwater within the fluvially derived sediments for reasons of both environmental monitoring and sustainability of the potential local groundwater resource. A conceptual hydrogeological model of the site proposes two hydrostratigraphic units, a basal aquifer of coarse-grained materials overlain by a thick semi-confining unit of finer materials. From this, a two-layer groundwater flow model and hydraulic conductivity distribution was developed based on bore monitoring and rainfall data using MODFLOW (McDonald and Harbaugh, 1988) and PEST (Doherty, 2004) based on GMS 6.5 software (EMSI, 2008). A second model was also considered with the alluvium represented as a single hydrogeological unit. Both models were calibrated to steady state conditions and sensitivity analyses of the parameters has demonstrated that both models are very stable for changes in the range of ± 10% for all parameters and still reasonably stable for changes up to ± 20% with RMS errors in the model always less that 10%. The preferred two-layer model was found to give the more realistic representation of the site, where water level variations and the numerical modeling showed that the basal layer of coarse sands and fine gravels is hydraulically connected to the river and the upper layer comprising a poorly sorted mixture of silt-rich clays and sands of very low permeability limits infiltration from the surface to the lower layer. The paucity of historical data has limited the numerical modelling to a steady state one based on groundwater levels during a drought period and forecasts for varying hydrological conditions (e.g. short term as well as prolonged dry and wet conditions) cannot reasonably be made from such a model. If future modelling is to be undertaken it is necessary to establish a regular program of groundwater monitoring and maintain a long term database of water levels to enable a transient model to be developed at a later stage. This will require a valid monitoring network to be designed with additional bores required for adequate coverage of the hydrogeological conditions at the Josephville site. Further investigations would also be enhanced by undertaking pump testing to investigate hydrogeological properties in the aquifer.

Conveying identity with mobile content

A series of mobile phone prototypes called The Swarm have been developed in response to the user needs identified in a three-year empirical study of young people’s use of mobile phones. The prototypes take cues from user led innovation and provide multiple avatars that allow individuals to define and manage their own virtual identity. This paper briefly maps the evolution of the prototypes and then describes how the pre-defined, color coded avatars in the latest version are being given greater context and personalization through the use of digital images. This not only gives ‘serendipity a nudge’ by allowing groups to come together more easily, it provides contextual information that can reduce gratuitous contact.

Europe and the Media: Building a new kind of Europe; is mass media the key?

The book is a joint effort of eight academics and journalists, Europe specialists from six countries (Australia, Germany, Poland, Slovenia, the United Kingdom and the United States). They give sometimes divergent views on the future of the so-called “European Project”, for building a common European economy and society, but agree that cultural changes, especially changes experienced through mass media, are rapidly taking place. One of the central interests of the book is the operation of the large media centre located at the European Commission in Brussels – the world’s largest gallery of permanently accredited correspondents. Jacket notes: The Lisbon Treaty of December 2009 is the latest success of the European Union’s drive to restructure and expand; yet questions persist about how democratic this new Europe might be. Will Brussels’ promotion of the “European idea” produce a common European culture and society? The authors consider it might, as a culture of everyday shared experience, though old ways are cherished, citizens forever thinking twice about committing to an uncertain future. The book focuses on mass media , as a prime agent of change, sometimes used deliberately to promote a “European project”; sometimes acting more naturally as a medium for new agendas. It looks at proposed media models for Europe, ranging from not very successful pan-European television, to the potentials of media systems based on national markets, and new media based on digital formats. It also studies the Brussels media service, the centre operated by the European Commission, which is the world’s largest concentration of journalists; and ways that dominant national media may come to serve the interests of communities now extending across frontiers. Europe and the Media notes change especially as encountered by new EU member countries of central and eastern Europe.

The experience of xenophobia in South Africa

In May 2008, xenophobic violence erupted in South Africa. The targets were individuals who had migrated from the north in search of asylum. Emerging first in township communities around Johannesburg, the aggression spread to other provinces. Sixty-two people died, and 100,000 (20,000 in the Western Cape alone) were displaced. As the attacks escalated across the country, thousands of migrants searched for refuge in police stations and churches. Chilling stories spread about mobs armed with axes, metal bars, and clubs. The mobs stormed from shack to shack, assaulted migrants, locked them in their homes, and set the homes on fire. The public reaction was one of shock and horror. The Los Angeles Times declared, “Migrants Burned Alive in S. Africa.” The South African president at the time, Thabo Mbeki, called for an end to “shameful and criminal attacks.” Commentators were stunned by the signs of hatred of foreigners (xenophobia) that emerged in the young South African democracy. The tragedy of the violence in South Africa was magnified by the fact that many of the victims had fled from violence and persecution in their countries of origin. Amid genocidal violations of human rights that had recently occurred in some countries in sub- Saharan Africa, the new South Africa stood as a beacon of democracy and respect for human dignity. With this openness in mind, many immigrants to South Africa sought safety and refuge from the conflicts in their homelands. More than 43,500 refugees and 227,000 asylum seekers now live in South Africa. The majority of people accorded refugee status came from Burundi, Democratic Republic of Congo, and Somalia. South Africa also hosts thousands of other migrants who remain undocumented.

#qldfloods and @QPSMedia: Crisis Communication on Twitter in the 2011 South East Queensland Floods

Social media, including Facebook and Twitter, played an important role in crisis communication at the height of the 2011 South East Queensland floods crisis (10-16 January). This report examines the role of the short-messaging system Twitter in disseminating and sharing crisis information and updates from state and local authorities as well as everyday citizens. We assess the overall use of Twitter, as well as that of the most important emergency service account, the Queensland Police’s @QPSMedia account.

The role of the Internet on export market growth : an empirical study in Latin America

The Internet has been shown to positively influence the export activities of firms from developed countries. However, the literature is vague as to whether the Internet has an impact on the export market growth of firms form developing countries. This paper examines of a cross-national sample of 204 firms from a Latin American country (Chile). The results show that Internet marketing activities positively influence information availability and business relationships, which lead to an increase in export market growth. The findings indicate that the Internet influences not only information availability for export performance but also business relationships generally thought to be face to face interactions in nature.

Transmission system expansion planning considering combined operation of wind farms and energy storage systems

An energy storage system (ESS) can provide ancillary services such as frequency regulation and reserves, as well as smooth the fluctuations of wind power outputs, and hence improve the security and economics of the power system concerned. The combined operation of a wind farm and an ESS has become a widely accepted operating mode. Hence, it appears necessary to consider this operating mode in transmission system expansion planning, and this is an issue to be systematically addressed in this work. Firstly, the relationship between the cost of the NaS based ESS and its discharging cycle life is analyzed. A strategy for the combined operation of a wind farm and an ESS is next presented, so as to have a good compromise between the operating cost of the ESS and the smoothing effect of the fluctuation of wind power outputs. Then, a transmission system expansion planning model is developed with the sum of the transmission investment costs, the investment and operating costs of ESSs and the punishment cost of lost wind energy as the objective function to be minimized. An improved particle swarm optimization algorithm is employed to solve the developed planning model. Finally, the essential features of the developed model and adopted algorithm are demonstrated by 18-bus and 46-bus test systems.