Moderation in higher education: Four discourses

Across the globe, higher education institutions are working in environments of increasing accountability with little sign of this trend abating. This heightened focus on accountability has placed greater demands on institutions to provide evidence of quality and the achievement of standards that assure that quality. Moderation is one quality assurance process that plays a central role in the teaching, learning and assessment cycle in higher education institutions. While there is a growing body of research globally on teaching, learning and , to a lesser degree, assessment in higher education, the process of moderation has received even less attention (Watty, Freeman, Howieson, Hancock, O'Connell, et al. 2013). Until recently, moderation processes in Australian universities have been typically located within individual institutions, with universities given the responsibility for developing their own specific policies and practices. However, in 2009 the Australian Government announced that an independent national quality and regulatory body for higher education institutions would be established. With the introduction of the Tertiary Education Quality Standards Authority (TEQSA), more formalised requirements for moderation of assessment are being mandated. In light of these reforms, the purpose of this qualitative study was to identify and investigate current moderation practices operating within one faculty, the Faculty of Education, in a large urban university in eastern Australia. The findings of this study revealed four discourses of moderation: equity, justification, community building and accountability. These discourses provide a starting point for academics to engage in substantive conversations around assessment and to further critique the processes of moderation.

The influence of abrasive pretreatment on hot air drying of grape

The drying of grapes is a more complex process compared to the dehydration of other agricultural materials due to the necessity of a pretreatment operation prior to drying. Grape drying to produce raisins is a very slow process, due to the peculiar structure of grape peel, that is covered by a waxy layer.Its removal has benn so far carried out by using several chemical pre-treatments. However, they cause heterogeneity in the waxes removal and create microscopic cracks. In this paper an abrasive pretreatment for enhancing the drying rate and preserving the grape samples is proposed. Two cultivars of grape were investigated: Regina white grape and Red Globe red grape. The drying kinetics of untreated and treated samples were studied using a convective oven at 50 C. Fruit quality parameters such as sugar and organic acid contents, shrinkage, texture, peel damage (i.e. by SEM analysis) and rehydration capacity were studied to evaluate the effectiveness of abrasive pretreatment on raisins. Abrasive pretreatment contributed to reduce drying time and rehydration time. The treated and untreated dried grapes were significantly different (p<0.05) in sugar and in tartaric acid content. On the contrary, no significant differences (p<0.05) in malic and citric acids in texture peoperties between untreated and treated samples were observed.

PM348 Heart education assessment and rehabilitation toolkit: Heart online. A web resource for clinicians

Access to the right information at the right time is a challenge facing health professionals across the globe. HEART Online (www.heartonline.org.au) is a website designed to support the delivery of evidence based care for the prevention and rehabilitation of heart disease. It was developed by the Queensland Government and the National Heart Foundation of Australia and launched May 2013.

Global journalism investigations in the digital age: Connections and collaborations

Investigative journalists who join what theorist Manuel Castells describes as the ‘network society’ can locate potential news sources using various social media platforms and interview them using Web-based communication technologies. The potential for journalistic investigations involving multi-directional conversations with news sources across the globe is beginning to be explored. Potential news sources who are part of the network society have unprecedented access to specialist investigative reporters irrespective of their location and can speak to them more cost effectively than in the past. This paper explores how new journalism technologies are allowing journalists to call powerful individuals and institutions to account, irrespective of national borders; and how previously silenced individuals are being given a voice. To read an example of international investigative journalism facilitated by a combination of social media, Web-based communications, reporter collaboration and news outlet collaborations see http://www.theaustralian.com.au/news/features/churchs-wall-of-silence-on-sexual-abuse/story-e6frg6z6-1226639077238.

Can perceptual indices estimate physiological strain across a range of environments and metabolic workloads when wearing explosive ordnance disposal and chemical protective clothing?

Objective Explosive ordnance disposal (EOD) often requires technicians to wear multiple protective garments in challenging environmental conditions. The accumulative effect of increased metabolic cost coupled with decreased heat dissipation associated with these garments predisposes technicians to high levels of physiological strain. It has been proposed that a perceptual strain index (PeSI) using subjective ratings of thermal sensation and perceived exertion as surrogate measures of core body temperature and heart rate, may provide an accurate estimation of physiological strain. Therefore, this study aimed to determine if the PeSI could estimate the physiological strain index (PSI) across a range of metabolic workloads and environments while wearing heavy EOD and chemical protective clothing. Methods Eleven healthy males wore an EOD and chemical protective ensemble while walking on a treadmill at 2.5, 4 and 5.5 km·h− 1 at 1% grade in environmental conditions equivalent to wet bulb globe temperature (WBGT) 21, 30 and 37 °C. WBGT conditions were randomly presented and a maximum of three randomised treadmill walking trials were completed in a single testing day. Trials were ceased at a maximum of 60-min or until the attainment of termination criteria. A Pearson's correlation coefficient, mixed linear model, absolute agreement and receiver operating characteristic (ROC) curves were used to determine the relationship between the PeSI and PSI. Results A significant moderate relationship between the PeSI and the PSI was observed [r = 0.77; p < 0.001; mean difference = 0.8 ± 1.1 a.u. (modified 95% limits of agreement − 1.3 to 3.0)]. The ROC curves indicated that the PeSI had a good predictive power when used with two, single-threshold cut-offs to differentiate between low and high levels of physiological strain (area under curve: PSI three cut-off = 0.936 and seven cut-off = 0.841). Conclusions These findings support the use of the PeSI for monitoring physiological strain while wearing EOD and chemical protective clothing. However, future research is needed to confirm the validity of the PeSI for active EOD technicians operating in the field.

Proceedings of the 3rd International Subtropical Cities Conference 2011 Subtropical Cities: Subtropical Urbanism -Beyond Climate Change

Climate has been, throughout modern history, a primary attribute for attracting residents to the “Sunshine States” of Florida (USA) and Queensland (Australia). The first major group of settlers capitalized on the winter growing season to support a year-­‐round agricultural economy. As these economies developed, the climate attracted tourism and retirement industries. Yet as Florida and Queensland have blossomed under beneficial climates, the stresses acting on the natural environment are exacting a toll. Southeast Florida and eastern Queensland are among the most vulnerable coastal metropolitan areas in the world. In these places the certainty of sea level rise is measurable with impacts, empirically observable, that will continue to increase regardless of any climate change mitigation.1 The cities of the subtropics share a series of paradoxes relating to climate, resources, environment, and culture. As the subtropical climate entices new residents and visitors there are increasing costs associated with urban infrastructure and the ravages of violent weather. The carefree lifestyle of subtropical cities is increasingly dependent on scarce water and energy resources and the flow of tangible goods that support a trade economy. The natural environment is no longer exploitable as the survival of the human environment is contingent upon the ability of natural ecosystems to absorb the impact of human actions. The quality of subtropical living is challenged by the mounting pressures of population growth and rapid urbanization yet urban form and contemporary building design fail to take advantage of the subtropical zone’s natural attributes of abundant sunshine, cooling breezes and warm temperatures. Yet, by building a global network of local knowledge, subtropical cities like Brisbane, the City of Gold Coast and Fort Lauderdale, are confidently leading the way with innovative and inventive solutions for building resiliency and adaptation to climate change. The Centre for Subtropical Design at Queensland University of Technology organized the first international Subtropical Cities conference in Brisbane, Australia, where the “fault-­‐lines” of subtropical cities at breaking points were revealed. The second conference, held in 2008, shed a more optimistic light with the theme "From fault-­‐lines to sight-­‐lines -­‐ subtropical urbanism in 20-­‐20" highlighting the leadership exemplified in the vitality of small and large works from around the subtropical world. Yet beyond these isolated local actions the need for more cooperation and collaboration was identified as the key to moving beyond the problems of the present and foreseeable future. The spirit of leadership and collaboration has taken on new force, as two institutions from opposite sides of the globe joined together to host the 3rd international conference Subtropical Cities 2011 -­‐ Subtropical Urbanism: Beyond Climate Change. The collaboration between Florida Atlantic University and the Queensland University of Technology to host this conference, for the first time in the United States, forges a new direction in international cooperative research to address urban design solutions that support sustainable behaviours, resiliency and adaptation to sea level rise, green house gas (GHG) reduction, and climate change research in the areas of architecture and urban design, planning, and public policy. With southeast Queensland and southern Florida as contributors to this global effort among subtropical urban regions that share similar challenges, opportunities, and vulnerabilities our mutual aim is to advance the development and application of local knowledge to the global problems we share. The conference attracted over 150 participants from four continents. Presentations by authors were organized into three sub-­‐themes: Cultural/Place Identity, Environment and Ecology, and Social Economics. Each of the 22 papers presented underwent a double-­‐blind peer review by a panel of international experts among the disciplines and research areas represented. The Centre for Subtropical Design at the Queensland University of Technology is leading Australia in innovative environmental design with a multi-­‐disciplinary focus on creating places that are ‘at home’ in the warm humid subtropics. The Broward Community Design Collaborative at Florida Atlantic University's College for Design and Social Inquiry has built an interdisciplinary collaboration that is unique in the United States among the units of Architecture, Urban and Regional Planning, Social Work, Public Administration, together with the College of Engineering and Computer Science, the College of Science, and the Center for Environmental Studies, to engage in funded action research through design inquiry to solve the problems of development for urban resiliency and environmental sustainment. As we move beyond debates about climate change -­‐ now acting upon us -­‐ the subtropical urban regions of the world will continue to convene to demonstrate the power of local knowledge against global forces, thereby inspiring us as we work toward everyday engagement and action that can make our cities more livable, equitable, and green.

Pedagogical relations in the age of big data [Commentary]

Introduction A pedagogical relationship - the relationship produced through teaching and learning - is, according to phenomenologist Max van Maanen, ‘the most profound relationship an adult can have with a child’ (van Maanen 1982). But what does it mean for a teacher to have a ‘profound’ relationship with a student in digital times? What, indeed, is an optimal pedagogical relationship at a time when the exponential proliferation and transformation of information across the globe is making for unprecedented social and cultural change? Does it involve both parties in a Facebook friendship? Being snappy with Snapchat? Tumbling around on Tumblr? There is now ample evidence of a growing trend to displace face-to-face interaction by virtual connections. One effect of these technologically mediated relationships is that a growing number of young people experience relationships as ‘mile-wide, inch-deep’ phenomena. It is timely, in this context, to explore how pedagogical relationships are being transmuted by Big Data, and to ask about the implications this has for current and future generations of professional educators.

International trends in the implementation of assessment for learning: Implications for policy and practice

This paper discusses the emergence of assessment for learning (AfL) across the globe with particular attention given to Western educational jurisdictions. Authors from Australia, Canada, Ireland, Israel, New Zealand, Norway, and the USA explain the genesis of AfL, its evolution and impact on school systems, and discuss current trends in policy directions for AfL within their respective countries. The authors also discuss the implications of these various shifts and the ongoing tensions that exist between AfL and summative forms of assessment within national policy initiatives.

A Web-based system enabling the integration, analysis, and 3D sub-surface visualization of groundwater monitoring data and geological models

The 3D Water Chemistry Atlas is an intuitive, open source, Web-based system that enables the three-dimensional (3D) sub-surface visualization of ground water monitoring data, overlaid on the local geological model (formation and aquifer strata). This paper firstly describes the results of evaluating existing virtual globe technologies, which led to the decision to use the Cesium open source WebGL Virtual Globe and Map Engine as the underlying platform. Next it describes the backend database and search, filtering, browse and analysis tools that were developed to enable users to interactively explore the groundwater monitoring data and interpret it spatially and temporally relative to the local geological formations and aquifers via the Cesium interface. The result is an integrated 3D visualization system that enables environmental managers and regulators to assess groundwater conditions, identify inconsistencies in the data, manage impacts and risks and make more informed decisions about coal seam gas extraction, waste water extraction, and water reuse.

Reviewing in-vehicle systems to improve fuel efficiency and road safety

Road transport plays a significant role in various industries and mobility services around the globe and has a vital impact on our daily lives. However it also has serious impacts on both public health and the environment. In-vehicle feedback systems are a relatively new approach to encouraging driver behavior change for improving fuel efficiency and safety in automotive environments. While many studies claim that the adoption of eco-driving practices, such as eco-driving training programs and in-vehicle feedback to drivers, has the potential to improve fuel efficiency, limited research has integrated safety and eco-driving. Therefore, it is crucial to understand the human factors related theories and practices which will inform the design of an in-vehicle Human Machine Interface (HMI) that could provide real-time driver feedback and consequently improve both fuel efficiency and safety. This paper provides a comprehensive review of the current state of published literature on in-vehicle systems to identify and evaluate the impact of eco-driving and safety feedback systems. This paper also discusses how these factors may conflict with one another and have a negative effect on road safety, while also exploring possible eco-driving practices that could encourage more sustainable, environmentally-conscious and safe driving behavior. The review revealed a lack of comprehensive theoretical research integrating eco-driving and safe driving, and no current available HMI covering both aspects simultaneously. Furthermore, the review identified that some eco-driving in-vehicle systems may enhance fuel efficiency without compromising safety. The review has identified a range of concepts which can be developed to influence driver acceptance of safety and eco-driving systems within the area of HMI. This can promote new research aimed at enhancing our understanding of the relationship between eco-driving and safety from the human factors viewpoint. This provides a foundation for developing innovative, persuasive and acceptable in-vehicle HMI systems to improve fuel efficiency and road safety.

Insolvency academics contributing to the review of insolvency laws: An Australian perspective

Introduction 1 It gives me great pleasure to contribute to this publication to honour Professor Ian Fletcher on his retirement as Foundation Chair of the INSOL International Academic Group. A collection of essays that include topics on domestic, cross-border and international insolvency appropriately reflects the breadth of Professor Fletcher’s impact on the scholarship of insolvency law – not only in his “home” jurisdiction of England and Wales and closer to home in Europe, but also stretching around the globe, in this case, to Australia. 2 In the early 1990s when I first began to research in the area of cross-border insolvency law, a colleague mentioned that they had recently attended the XIIIth International Congress of Comparative Law in Montreal in August 1990 and heard the Cross-border Insolvency: General Report expertly delivered by an English academic, Ian Fletcher, who was widely regarded as an authority in the area. This was my first introduction to Professor Fletcher’s work and over the intervening years I have referred often to his scholarship....

Sports anti-siphoning laws and the controversy of sports broadcasting: A case study of Pakistan

Controversies between private and public broadcasters over the broadcasting of live sports, especially cricket, during important sports events have emerged as a serious legal issue in Pakistan. Controversy between Geo Super and Pakistan Television over live telecast of the ICC Cricket World Cup is a typical example of such controversies. An aggressive legal battle, during a most important cricketing event, not only hampered the enjoyment of cricket viewers across the country but also gave Pakistan a bad name across the globe. This article discusses in detail this controversy and highlights lacunas in the existing sports broadcasting regime of Pakistan. There are no clear and well defined sports broadcasting laws in Pakistan. The Pakistan Electronic Media Regulatory Authority (PEMRA) rules are of general nature. Secondly, PEMRA rules are not comprehensive and explicit enough to provide clear guidelines about sports broadcasting. This may be a possible reason why sports broadcasting controversies reach the highest court in Pakistan, the Supreme Court of Pakistan. Despite these ugly battles between broadcasters, the government of Pakistan has never given due importance to this issue and no efforts have been made at any level to come up with legislation on sports broadcasting to avoid such controversies or to resolve them amicably in the light of well-defined laws on this subject. The purpose of this article is to draw the attention of the concerned authorities towards this important issue because in future more such controversies may be expected in the absence of a sports broadcasting regime in the country.

Integration of Geospatial and Built Environment - National Data Policy

Digital technology offers enormous benefits (economic, quality of design and efficiency in use) if adopted to implement integrated ways of representing the physical world in a digital form. When applied across the full extent of the built and natural world, it is referred to as the Digital Built Environment (DBE) and encompasses a wide range of approaches and technology initiatives, all aimed at the same end goal: the development of a virtual world that sufficiently mirrors the real world to form the basis for the smart cities of the present and future, enable efficient infrastructure design and programmed maintenance, and create a new foundation for economic growth and social well-being through evidence-based analysis. The creation of a National Data Policy for the DBE will facilitate the creation of additional high technology industries in Australia; provide Governments, industries and citizens with greater knowledge of the environments they occupy and plan; and offer citizen-driven innovations for the future. Australia has slipped behind other nations in the adoption and execution of Building Information Modelling (BIM) and the principal concern is that the gap is widening. Data driven innovation added $67 billion to the Australian economy in 20131. Strong open data policy equates to $16 billion in new value2. Australian Government initiatives such as the Digital Earth inspired “National Map” offer a platform and pathway to embrace the concept of a “BIM Globe”, while also leveraging unprecedented growth in open source / open data collaboration. Australia must address the challenges by learning from international experiences—most notably the UK and NZ—and mandate the use of BIM across Government, extending the Framework for Spatial Data Foundation to include the Built Environment as a theme and engaging collaboration through a “BIM globe” metaphor. This proposed DBE strategy will modernise the Australian urban planning and the construction industry. It will change the way we develop our cities by fundamentally altering the dynamics and behaviours of the supply chains and unlocking new and more efficient ways of collaborating at all stages of the project life-cycle. There are currently two major modelling approaches that contribute to the challenge of delivering the DBE. Though these collectively encompass many (often competing) approaches or proprietary software systems, all can be categorised as either: a spatial modelling approach, where the focus is generally on representing the elements that make up the world within their geographic context; and a construction modelling approach, where the focus is on models that support the life cycle management of the built environment. These two approaches have tended to evolve independently, addressing two broad industry sectors: the one concerned with understanding and managing global and regional aspects of the world that we inhabit, including disciplines concerned with climate, earth sciences, land ownership, urban and regional planning and infrastructure management; the other is concerned with planning, design, construction and operation of built facilities and includes architectural and engineering design, product manufacturing, construction, facility management and related disciplines (a process/technology commonly known as Building Information Modelling, BIM). The spatial industries have a strong voice in the development of public policy in Australia, while the construction sector, which in 2014 accounted for around 8.5% of Australia’s GDP3, has no single voice and because of its diversity, is struggling to adapt to and take advantage of the opportunity presented by these digital technologies. The experience in the UK over the past few years has demonstrated that government leadership is very effective in stimulating industry adoption of digital technologies by, on the one hand, mandating the use of BIM on public procurement projects while at the same time, providing comparatively modest funding to address the common issues that confront the industry in adopting that way of working across the supply chain. The reported result has been savings of £840m in construction costs in 2013/14 according to UK Cabinet Office figures4. There is worldwide recognition of the value of bringing these two modelling technologies together. Australia has the expertise to exercise leadership in this work, but it requires a commitment by government to recognise the importance of BIM as a companion methodology to the spatial technologies so that these two disciplinary domains can cooperate in the development of data policies and information exchange standards to smooth out common workflows. buildingSMART Australasia, SIBA and their academic partners have initiated this dialogue in Australia and wish to work collaboratively, with government support and leadership, to explore the opportunities open to us as we develop an Australasian Digital Built Environment. As part of that programme, we must develop and implement a strategy to accelerate the adoption of BIM processes across the Australian construction sector while at the same time, developing an integrated approach in concert with the spatial sector that will position Australia at the forefront of international best practice in this area. Australia and New Zealand cannot afford to be on the back foot as we face the challenges of rapid urbanisation and change in the global environment. Although we can identify some exemplary initiatives in this area, particularly in New Zealand in response to the need for more resilient urban development in the face of earthquake threats, there is still much that needs to be done. We are well situated in the Asian region to take a lead in this challenge, but we are at imminent risk of losing the initiative if we do not take action now. Strategic collaboration between Governments, Industry and Academia will create new jobs and wealth, with the potential, for example, to save around 20% on the delivery costs of new built assets, based on recent UK estimates.

Performance enhancement: A whole of person approach to first year dance students’ transition into tertiary training

The transition into university presents very particular challenges for students. The First Year Experience (FYE) is a transitional liminal phase, fraught with uncertainty, ripe with potential. The complexity inherent in this initial phase of tertiary education is well documented and continues to be interrogated. Providing timely and effective support and interventions for potentially at-risk first year students as they transition into tertiary study is a key priority for universities across the globe (Gale et al., 2015). This article outlines the evolution of an established and highly successful Transitional Training Program (TTP) for first year tertiary dance students, with particular reference to the 2015 iteration of the program. TTP design embraces three dimensions: physical training in transition, learning in transition, and teaching for transition, with an emphasis on developing and encouraging a mindset that enables information to be transferred into alternative settings for practice and learning throughout life. The aim of the 2015 TTP was to drive substantial change in first year Dance students’ satisfaction, connectedness, and overall performance within the Bachelor of Fine Arts (BFA) Dance course, through the development and delivery of innovative curriculum and pedagogical practices that promote the successful transition of dance students into their first year of university. The program targeted first year BFA Dance students through the integration of specific career guidance; performance psychology; academic skills support; practical dance skills support; and specialized curricula and pedagogy.

Could wastewater analysis be a useful tool for China? — A review

Analysing wastewater samples is an innovative approach that overcomes many limitations of traditional surveys to identify and measure a range of chemicals that were consumed by or exposed to people living in a sewer catchment area. First conceptualised in 2001, much progress has been made to make wastewater analysis (WWA) a reliable and robust tool for measuring chemical consumption and/or exposure. At the moment, the most popular application of WWA, sometimes referred as sewage epidemiology, is to monitor the consumption of illicit drugs in communities around the globe, including China. The approach has been largely adopted by law enforcement agencies as a device to monitor the temporal and geographical patterns of drug consumption. In the future, the methodology can be extended to other chemicals including biomarkers of population health (e.g. environmental or oxidative stress biomarkers, lifestyle indicators or medications that are taken by different demographic groups) and pollutants that people are exposed to (e.g. polycyclic aromatic hydrocarbons, perfluorinated chemicals, and toxic pesticides). The extension of WWA to a huge range of chemicals may give rise to a field called sewage chemical-information mining (SCIM) with unexplored potentials. China has many densely populated cities with thousands of sewage treatment plants which are favourable for applying WWA/SCIM in order to help relevant authorities gather information about illicit drug consumption and population health status. However, there are some prerequisites and uncertainties of the methodology that should be addressed for SCIM to reach its full potential in China.