Introduction of a short writing task to measure and develop academic literacy in first year health undergraduates

This paper describes an initiative in the Faculty of Health at the Queensland University of Technology, Australia, where a short writing task was introduced to first year undergraduates in four courses including Public Health, Nursing, Social Work and Human Services, and Human Movement Studies. Over 1,000 students were involved in the trial. The task was assessed using an adaptation of the MASUS Procedure (Measuring the Academic Skills of University Students) (Webb & Bonanno, 1994). Feedback to the students including MASUS scores then enabled students to be directed to developmental workshops targeting their academic literacy needs. Students who achieved below the benchmark score were required to attend academic writing workshops in order to obtain the same summative 10% that was obtained by those who had achieved above the benchmark score. The trial was very informative, in terms of determining task appropriateness and timing, student feedback, student use of support, and student perceptions of the task and follow-up workshops. What we learned from the trial will be presented with a view to further refinement of this initiative.

Hypercapitalism : an investigation into the relationship between language, new media, and social perceptions of value

Overall, this thesis purports to make two significant contributions to knowledge. The first is a foundational critique of political economy in the context of an emergent global knowledge economy. The second is a method for analysing evaluations in language. The relationships that give coherence to those two contributions are as follows. The widely-heralded emergence of a knowledge economy indicates that more intimate aspects of human activity have become exposed to commodification on a massive scale, specifically, activities associated with thought and language. Correspondingly, more abstract forms of value have developed as the products of thought and language have become dominant commodity forms. Historical investigation shows that value has moved from an objective category in political economy, pertaining to such substances as precious metals and land, to become situated today predominantly in “expert” expressions of language, or more precisely, their institutional contexts of production. These are now propagated and circulated on a global scale. Legal, political, and technological developments are key in the development of new, more abstract forms of labour and value, although the relationships connecting these are neither simple nor direct. They are, however, inseparably related in the trajectories that this thesis describes. Consequently they are dealt with inseparably throughout.

Visualisation of groundwater flow using texture based visualisation techniques

Texture based techniques for visualisation of unsteady vector fields have been applied for the visualisation of a Finite volume model for variably saturated groundwater flow through porous media. This model has been developed by staff in the School of Mathematical Sciences QUT for the study of salt water intrusion into coastal aquifers. This presentation discusses the implementation and effectiveness of the IBFV algorithm in the context of visualisation of the groundwater simulation outputs.

Role of 3D visual conceptualisation of groundwater system models as a management support tool

After the recent prolonged drought conditions in many parts of Australia it is increasingly recognised that many groundwater systems are under stress. Although this is obvious for systems that are utilised for intensive irrigation many other groundwater systems are also impacted.Management strategies are highly variable to non-existent. Policy and regulation are also often inadequate, and are reactive or politically driven. In addition, there is a wide range of opinion by water users and other stakeholders as to what is “reasonable”management practice. These differences are often related to the “value”that is put on the groundwater resource. Opinions vary from “our right to free water”to an awareness that without effective management the resource will be degraded. There is also often misunderstanding of surface water-groundwater linkages, recharge processes, and baseflow to drainage systems.

Rover autonomous integrity monitoring of GNSS RTK positioning solutions with multi-constellations

This paper studies receiver autonomous integrity monitoring (RAIM) algorithms and performance benefits of RTK solutions with multiple-constellations. The proposed method is generally known as Multi-constellation RAIM -McRAIM. The McRAIM algorithms take advantage of the ambiguity invariant character to assist fast identification of multiple satellite faults in the context of multiple constellations, and then detect faulty satellites in the follow-up ambiguity search and position estimation processes. The concept of Virtual Galileo Constellation (VGC) is used to generate useful data sets of dual-constellations for performance analysis. Experimental results from a 24-h data set demonstrate that with GPS&VGC constellations, McRAIM can significantly enhance the detection and exclusion probabilities of two simultaneous faulty satellites in RTK solutions.

Groundwater Visualisation System (GVS): a software framework for developing low-end, scalable and robust software for 3D visualisation and animation of groundwater conceptual models

Effective management of groundwater requires stakeholders to have a realistic conceptual understanding of the groundwater systems and hydrological processes.However, groundwater data can be complex, confusing and often difficult for people to comprehend..A powerful way to communicate understanding of groundwater processes, complex subsurface geology and their relationships is through the use of visualisation techniques to create 3D conceptual groundwater models. In addition, the ability to animate, interrogate and interact with 3D models can encourage a higher level of understanding than static images alone. While there are increasing numbers of software tools available for developing and visualising groundwater conceptual models, these packages are often very expensive and are not readily accessible to majority people due to complexity. .The Groundwater Visualisation System (GVS) is a software framework that can be used to develop groundwater visualisation tools aimed specifically at non-technical computer users and those who are not groundwater domain experts. A primary aim of GVS is to provide management support for agencies, and enhancecommunity understanding.

International labour standards and Queensland

Queensland’s legal labour disputes history does not exhibit the current trend seen in Canada and Switzerland (Gravel & Delpech, 2008) where cases citing International Labour Standards (ILS) are often successful (which is not presently the case in Queensland either). The two Queensland cases (Kuhler v. Inghams Enterprises P/L & Anor, 1997 and Bale v. Seltsam Pty Ltd, 1996) that have used ILSs were lost. Australia is a member state of the International Labour Organization (ILO) and a signatory of many ILSs. Yet, ILSs are not used in their legal capacity when compared to other international standards in other areas of law. It is important to recognize that ILSs are uniquely underutilized in labour law. Australian environmental, criminal, and industrial disputes consistently draw on international standards. Why not for the plight of workers? ILSs draw their power from supranational influence in that when a case cites an ILS the barrister or solicitor is going beyond legal precedence and into international peer pressure. An ILS can be appropriately used to highlight that Australian or Queensland legislation does not conform to a Convention or Recommendation. However, should the case deal with a breach of existing law based or modified by an ILS, citing the ILS is a good way to remind the court of its origin. It’s a new legal paradigm critically lacking in Queensland’s labour law practice. The following discusses the research methodology used in this paper. It is followed by a comparative discussion of results between the prevalence of ILSs and other international standards in Queensland case history. Finally, evidence showing the international trend of labour disputes using ILSs for victory is discussed.

Community engagement for development and application of 3D visualisation models : a two edged

Background: SEQ Catchments Ltd and QUT are collaborating on groundwater investigations in the SE Qld region, which utilise community engagement and 3D Visualisation methodologies. The projects, which have been funded by the Australian Government’s NHT and Caring for our Country programmes, were initiated from local community concerns regarding groundwater sustainability and quality in areas where little was previously known. ----- Objectives: Engage local and regional stakeholders to tap all available sources of information;•Establish on-going (2 years +) community-based groundwater / surface water monitoring programmes;•Develop 3D Visualisation from all available data; and•Involve, train and inform the local community for improved on-ground land and water use management. ----- Results and findings: Respectful community engagement yielded information, access to numerous monitoring sites and education opportunities at low cost, which would otherwise be unavailable. A Framework for Community-Based Groundwater Monitoring has been documented (Todd, 2008).A 3D visualisation models have been developed for basaltic settings, which relate surface features familiar to the local community with the interpreted sub-surface hydrogeology. Groundwater surface movements have been animated and compared to local rainfall using the time-series monitoring data.An important 3D visualisation feature of particular interest to the community was the interaction between groundwater and surface water. This factor was crucial in raising awareness of potential impacts of land and water use on groundwater and surface water resources.

Co-creative labour

This article introduces a special issue on the topic of co-creative labour. The term co-creation is used to describe the phenomenon of consumers increasingly participating in the process of making and circulating media content and experiences. Practices of user-created content and user-led innovation are now significant sources of both economic and cultural value. But how should we understand and analyse these value-generating activities? What are the identities and forms of agency that constitute these emerging co-creative relations? Should we define these activities as a form of labour and what are the implications and impacts of co-creative practices on the employment conditions and professional identities of people working in the creative industries? In answering these questions we argue that careful attention must be paid to how the participants themselves (both professional and non-professional, commercial and non-commercial) negotiate and navigate the meanings and possibilities of these emerging co-creative relationships for mutual benefit. Co-Creative media production is perhaps a disruptive agent of change that sits uncomfortably with our current understandings and theories of work and labour. The articles in this special issue follow and unpack the often diverse and contradictory ways in which the participants themselves use and remake the social categories of work and labour as they seek to co-ordinate and contest co-creative media practices.

ePortfolio use by university students in Australia: A review of the Australian ePortfolio Project

In October 2008, the Australian Learning and Teaching Council (ALTC) released the final report for the commissioned project ePortfolio use by university students in Australia: Informing excellence in policy and practice. The Australian ePortfolio Project represented the first attempt to examine the breadth and depth of ePortfolio practice in the Australian higher education sector. The research activities included surveys of stakeholder groups in learning and teaching, academic management and human resource management, with respondents representing all Australian universities; a series of focus groups and semi-structured interviews which sought to explore key issues in greater depth; and surveys designed to capture students’ pre-course expectations and their post-course experiences of ePortfolio learning. Further qualitative data was collected through interviews with ‘mature users’ of ePortfolios. Project findings revealed that, while there was a high level of interest in the use of ePortfolios in terms of the potential to help students become reflective learners who were conscious of their personal and professional strengths and weaknesses, the state of play in Australian universities was very fragmented. The project investigation identified four individual, yet interrelated, contexts where strategies may be employed to support and foster effective ePortfolio practice in higher education: government policy, technical standards, academic policy, and learning and teaching. Four scenarios for the future were also presented with the goal of stimulating discussion about opportunities for stakeholder engagement. It is argued that the effective use of ePortfolios requires open dialogue and collaboration between the different stakeholders across this range of contexts.

ePortfolio use by university students in Australia : Developing a sustainable community of practice

This report documents Stage Two of the Australian ePortfolio Project (AeP2), to specifically explore the current scope of national and international ePortfolio communities of practice in order to identify the factors that have contributed to their success and sustainability. The study has built on Stage One of the Australian ePortfolio Project (Hallam, Harper, McCowan, Hauville, McAllister, & Creagh, 2008), which outlined the broad range of issues and challenges, as well as significant opportunities, that faced the higher education sector in terms of ePortfolio practice, to determine how the emergent community of ePortfolio researchers and practitioners in Australia might be advanced. ---------- The overarching aims of this project were to focus on building the Australian community of practice through an online forum and further symposium activities. Through the research activities the project sought to generate the following major outcomes: develop a forum within the ALTC Exchange to support an ePortfolio community of practice; develop strategies to encourage interest in and engagement with community of practice activities; develop and promote resources to support the diverse stakeholders in ePortfolio practice; collaborate in the establishment of a cross-sector ePortfolio community of practice; host a second Australian ePortfolio Symposium (AeP2) to disseminate the findings from the Australian ePortfolio Project, to explore innovative practice in ePortfolio use in higher education, to articulate policy developments, and to stimulate discussion on international ePortfolio issues; host an associated trade display as a forum for strengthening the higher education sector’s understanding of the features and functionality of ePortfolio platforms; develop resources to support an ePortfolio symposium model that may be adopted for future events. ----------- The project activities encompassed a survey of stakeholders, a program of semi-structured interviews with community managers and a series of case studies depicting successful ePortfolio communities. The survey of ePortfolio practitioners sought to determine the potential value of an ePortfolio CoP, the preferred focus for and the desired features of such a community, as well as the options for the technical and social architecture of an online forum. Through the semi-structured interviews it was possible to examine current examples of CoP activity, to identify the critical success factors and the challenges faced by individual ePortfolio CoPs, so that the attributes of good practice could be presented. The data collected in the interviews contributed to the development of 14 case studies, which have been beneficial in illustrating the diverse nature of CoPs in Australia and overseas.----------- The report presents a rich picture of national and international ePortfolio communities of practice, with an examination of the factors that have contributed to their success and sustainability.

Use of advanced technology videotapes in the delivery of structural engineering courses

A teaching and learning development project is currently under way at Queensland University of Technology to develop advanced technology videotapes for use with the delivery of structural engineering courses. These tapes consist of integrated computer and laboratory simulations of important concepts, and behaviour of structures and their components for a number of structural engineering subjects. They will be used as part of the regular lectures and thus will not only improve the quality of lectures and learning environment, but also will be able to replace the ever-dwindling laboratory teaching in these subjects. The use of these videotapes, developed using advanced computer graphics, data visualization and video technologies, will enrich the learning process of the current diverse engineering student body. This paper presents the details of this new method, the methodology used, the results and evaluation in relation to one of the structural engineering subjects, steel structures.

Fit optimisation of a distal medial tibia plate

An iterative method for the fit optimisation of a pre-contoured fracture fixation plate for a given bone data set is presented. Both plate shape optimisation and plate fit quantification are conducted in a virtual environment utilising computer graphical methods and 3D bone and plate models. Two optimised shapes of the undersurface of an existing distal medial tibia plate were generated based on a dataset of 45 3D bone models reconstructed from computed tomography image data of Japanese tibiae. The existing plate shape achieved an anatomical fit on 13% of tibiae from the dataset. Modified plate 1 achieved an anatomical fit for 42% and modified plate 2 a fit for 67% of the bones. If either modified plate 1 or plate 2 is used, then the anatomical fit can be increased to 82% for the same dataset. Issues pertaining to any further improvement in plate fit/shape are discussed.