Workers’ UV exposure and the subsequent impact on skin

Introduction: Excessive exposure to ultraviolet (UV) radiation from sunlight is a causative factor in the development of skin damage and skin cancer. Little research has been undertaken into assessing the sun exposure linking to skin damage inside buildings or behind window glass. This project directly addressed this issue by aiming to assess the role that UV exposure has on skin damage for indoor workers and drivers. Methods: Measurements of personal UV exposure using UV sensitive polymer dosimeters were undertaken of 41 indoor workers and 3 professional drivers. Physical measurements of skin characteristics including skin pigmentation and UV induced skin photoaging were also determined. In addition, demographic information along with phenotypic characteristics, sun exposure and sun protection practice history, and history of skin damage were assessed through a questionnaire. Results: Indoor workers typically received low doses of UV radiation. However, one driver received a high dose (13J/cm2 UVA and 4.99 MED UVB on the arm). Age and years residing in Australia had a positive correlation with UV induced skin pigmentation. The number of major sunburns before 18 years was a risk factor for skin damage in adults. Those participants with fair skin, non-black hair and blue/green /blue-grey eye were more likely to have skin damage related to sun exposure. Conclusions: A person’s age, years residing in Australia, numbers of major sunburn, skin colour, hair colour and eye colour are important factors associated with the development of sun-related skin damage in workers. ‘Real World’ implications: 1. The number of major sunburns before 18 years was a risk factor for skin damage in adults. This clearly confirms the importance of early prevention. To protect the skin from extensive sun exposure for your generation should have significance for further prevention of skin damage. 2. It is unsurprising that age and years residing in Australia were associated with skin damage related UV radiation. Therefore, the general public should reinforce their sun protective measures and check skin regularly. 3. Drivers should take sun protective measures during their working hours between sunrise and sunset.

Positive design and construction of mechanisms for the sustainable development in microenterprises in Africa

Enterprise development and its contribution to societal and economic outcomes are well known. However, limited research into microenterprises and the practices of microfinance and microcredit in developing countries has been carried out. This chapter presents the findings of research based on six years of engagement with the microentrepreneurs of Beira in Mozambique and suggests a model for responsible and sustainable support for enterprise development in developing economies. Building on semistructured interviews, observation, and participatory action research, this research project articulates a new approach supportive of enterprise development, as a process of cocreation with local people and based on sustainability principles. These findings are part of a longitudinal study of the successes and failures of small enterprises and their impact on social and economic activity.

Infrastructure sustainability : vulnerability of axially loaded columns subjected to transverse impact loads

Increased industrialisation has brought to the forefront the susceptibility of concrete columns in both buildings and bridges to vehicle impacts. Accurate vulnerability assessments are crucial in the design process due to possible catastrophic nature of the failures that can cause. This chapter reports on research undertaken to investigate the impact capacity of the columns of low to medium raised building designed according to the Australian standards. Numerical simulation techniques were used in the process and validation was done by using experimental results published in the literature. The investigation thus far has confirmed that vulnerability of typical columns in five story buildings located in urban areas to medium velocity car impacts and hence these columns need to be re-designed or retrofitted. In addition, accuracy of the simplified method presented in EN 1991-1-7 to quantify the impact damage was scrutinised. A simplified concept to assess the damage due to all collisions modes was introduced. The research information will be extended to generate a common data base to assess the vulnerability of columns in urban areas against new generation of vehicles.

Sustainable urban infrastructure development in south east Asia : evidence from Hong Kong, Kuala Lumpur and Singapore

Many South East Asian cities have experienced substantial physical, economic and social transformations during the past several decades. The rapid pace of globalisation and economic restructuring has resulted in these cities receiving the full impact of urbanisation pressures. In an attempt to ease these pressures, cities such as Singapore, Hong Kong and Kuala Lumpur have advocated growth management approaches focussing especially on urban infrastructure sustainability. These approaches aim to achieve triple bottom line sustainability by balancing economic and social development, and environmental protection. This chapter evaluates three Asia-Pacific city cases, Singapore, Hong Kong and Kuala Lumpur, and assesses their experiences in managing their urban forms and infrastructure whilst promoting sustainable patterns of urban development.

What is the impact of land tenure on the sustainability of retirement village communities in Australia?

In 2005, 17.3% of Australians were aged 60 years and older according to the Australian Bureau of statistics (ABS). According to aBS this situation mirrors the poulation profile of other developed countries such as Canada, New Zealand, the United States of America and to some extent the United Kingdom (ABS). Self contained independent living units in retirement Villages are now contributing to the dwellings available for those aged 55 years and over in Australia and the retirement village sector has become a significant sector within the residential property market. However, the method of operaton of many retirement villages, and the lack of freehold tenure, impacts on the desireability of retirement village life to potential residents. This paper focuses on sustainability from the perspective of the ongoing viability of retirement village operations in light of the impact of land tenure and operational issues on the perceptions of potential residents.

The impact of contractor’s characteristics in gauging level satisfaction

The outcomes of the construction projects can be evaluated in numerous ways. One method is to measure the satisfaction of participants as represented by the differences between their expectations and perceptions. This measurement is used widely in construction as it promises benefits, such as the improvement of product delivery, and enhances services quality by identifying some necessary changes. Commonly satisfaction measurement is gauged by evaluating the level of client satisfaction of construction performance. The measurement of customer satisfaction on the other hand, is based on the quality of the end product. This evaluation is used to encourage contractors to improve their performance to a required level and to ensure that the projects are delivered as expected- in terms of time, budget and quality. Several studies of performance measurement have indicated that contractor performance is still not satisfactory, as the outcome delivered is not as required (because of cost overruns, time overruns or because it is generally unsatisfactory). This drawback may be due to the contractors’ lack of expertise, motivation and/or satisfaction. The measurement of performance based on contractor satisfaction levels is still new and very few studies have yet taken place in the construction industry. This paper examines how the characteristics of a contracting organisation – namely its experience in the industry, background, past performance, size of organisation and financial stability- may influence its satisfaction levels with regards to project performance. Previous literature reviews and interviews are used as research tools in the preliminary investigation. The outcome is expected to present a basic understanding of contractor satisfaction measurement and its potential for improving the performance of project outcomes.

Sustainability and mandatory disclosure in Queensland : an assessment of the impact on home buyer patterns

Sustainability Declarations were introduced by the Queensland State Government on 1 January 2010 as a compulsory measure for all dwelling sales. The purpose of this policy decision was to improve the relevance of sustainability in the home ownership decision making process. This paper assesses the initial impact of this initiative over its first year in operation. In partnership with the Real Estate Institute of Queensland, real estate agents and salespeople in Queensland were surveyed to determine what impact the Sustainability Declaration has had on home buyer decision making. The level of compliance by the real estate industry was also reviewed. These preliminary findings indicate a high level of compliance from the real estate industry, however results confirm that sustainability is yet to become a criterion of relevance to the majority of home buyers in Queensland. The Sustainability Declarations are a first step in raising awareness in home owners of the importance of sustainability in housing. Further monitoring of this impact will be carried out over time.

The impact of changes to the graduated driver licensing program in Queensland, Australia on the experiences of learner drivers

Purpose: Graduated driver licensing (GDL) has been introduced in numerous jurisdictions in Australia and internationally in an attempt to ameliorate the significantly greater risk of death and injury for young novice drivers arising from road crashes. The GDL program in Queensland, Australia, was extensively modified in July 2007. This paper reports the driving and licensing experiences of Learner drivers progressing through the current-GDL program, and compares them to the experiences of Learners who progressed through the former-GDL program. ----- ----- Method: Young drivers (n = 1032, 609 females, 423 males) aged 17 to 19 years (M = 17.43, SD = 0.67) were recruited as they progressed from a Learner to a Provisional driver’s licence. They completed a survey exploring their sociodemographic characteristics, driving and licensing experiences as a Learner. Key measures for a subsample (n = 183) of the current-GDL drivers were compared with the former-GDL drivers (n = 149) via t-tests and chi-square analyses. ----- ----- Results: As expected, Learner drivers progressing through the current-GDL program gained significantly more driving practice than those in the former program, which was more likely to be provided by mothers than in the past. Female learners in the current-GDL program reported less difficulty obtaining supervision than those in the former program. The number of attempts needed to pass the practical driving assessment did not change, nor did the amount of professional supervision. The current-GDL Learners held their licence for a significantly longer duration than those in the former program, with the majority reporting that their Logbook entries were accurate on the whole. Compared to those in the former program, a significantly smaller proportion of male current-GDL Learners reported being detected for a driving offence while the females reported significantly lower crash involvement. Most current-GDL drivers reported undertaking their supervised practice at the end of the Learner period. ----- ----- Conclusions: The enhancements to the GDL program in Queensland appear to have achieved many of their intended results. The current-GDL learners participating in the study reported obtaining a significantly greater amount of supervised driving experience compared to former-GDL learners. Encouragingly, the current-GDL Learners did not report any greater difficulty in obtaining supervised driving practice, and there was a decline in the proportion of current-GDL Learners engaging in unsupervised driving. In addition, the majority of Learners do not appear to be attempting to subvert logbook recording requirements, as evidenced by high rates of self-reported logbook accuracy. The results have implications for the development and the evaluation of GDL programs in Australia and around the world.

Development of an online condition monitoring system for slow speed machinery

One of the main challenges of slow speed machinery condition monitoring is that the energy generated from an incipient defect is too weak to be detected by traditional vibration measurements due to its low impact energy. Acoustic emission (AE) measurement is an alternative for this as it has the ability to detect crack initiations or rubbing between moving surfaces. However, AE measurement requires high sampling frequency and consequently huge amount of data are obtained to be processed. It also requires expensive hardware to capture those data, storage and involves signal processing techniques to retrieve valuable information on the state of the machine. AE signal has been utilised for early detection of defects in bearings and gears. This paper presents an online condition monitoring (CM) system for slow speed machinery, which attempts to overcome those challenges. The system incorporates relevant signal processing techniques for slow speed CM which include noise removal techniques to enhance the signal-to-noise and peak-holding down sampling to reduce the burden of massive data handling. The analysis software works under Labview environment, which enables online remote control of data acquisition, real-time analysis, offline analysis and diagnostic trending. The system has been fully implemented on a site machine and contributing significantly to improve the maintenance efficiency and provide a safer and reliable operation.

Assessing the impact of transit and personal characteristics on mode choice of TOD users

Comparison are required to understand transport benefits of Transit Oriented Developments (TODs). Mode shares of TOD users need to be understood. Accurate travel demand models for TODs are needed.

Whole life cycle costing for Malaysia residential property development : the cultural environment

As knowledge of the residential development costing impact on resource and budgeting use increase, developers are moving towards more sustainable solution by implementing whole life cycle costing. Property management requires an understanding of infrastructure management, service life planning and quality management. Today, people are beginning to realize that effective property management in high-rise residential property can sustain the property value and maintain high returns on their investment. The continuous growth of high-rise residential properties indicates that there is a need for an effective property management system to provide a sustainable high-rise residential property development. For such reasons, this paper attempts to study the culture that have been applied due the residential property development in Malaysia as to improve to the best and sustainable practice in providing the best cost effectiveness management system in residential property development.

Strategic technology management : case study development in innovative building products

National and international competition demands that Australian organisations become more competent at making the strategic technological decisions that impact their future in the international business economy. A new subject unit, Management of Technology is now offered in the popular Master of Project Management and Master of Business Administration programs at the Queensland University of Technology. This cross-disciplinary subject provides students with a theoretical foundation and practical tools to improve the efficiency and competitiveness of technically-oriented organisations. Applied case studies—shown to be the most appropriate mode of learning for mature-age students—form an integral component of the teaching program. In the first offerings of this subject during 1995 and 1996, American case studies were used. QUT has now supported the development of Australian case study packages for technology management through its Teaching and Learning Grants Scheme. The first case developed—Inland Oil Refiners’ Microstill Project—was completed in early 1996. A newly developed case—Automated Door Opening System for Wheelchair Access—is currently being completed. This case (comprising case study documentation and video presentation) tracks a cross-disciplinary product development driven by legislative and community pressures. It also reinforces the importance of personal relationships in the technology and business development that has taken this young Brisbane-based company from its embryonic beginnings on the Queensland Cultural Centre in 1994 to a national and export-focussed organisation in 1997. This paper reviews the need to develop Australian case material in Management of Technology, discusses the case study documentation and supporting video developed, and application of the case study approach in this teaching initiative in QUT’s Master of Project Management and Master of Business Administration programs.

Development and validation of a pregnancy symptoms inventory

BACKGROUND. Physical symptoms are common in pregnancy and are predominantly associated with normal physiological changes. These symptoms have a social and economic cost, leading to absenteeism from work and additional medical interventions. There is currently no simple method for identifying common pregnancy related problems in the antenatal period. A validated tool, for use by pregnancy care providers would be useful. AIM: The aim of the project was to develop and validate a Pregnancy Symptoms Inventory for use by healthcare professionals (HCPs). METHODS: A list of symptoms was generated via expert consultation with midwives and obstetrician gynaecologists. Focus groups were conducted with pregnant women in their first, second or third trimester. The inventory was then tested for face validity and piloted for readability and comprehension. For test-re-test reliability, it was administered to the same women 2 to 3 days apart. Finally, outpatient midwives trialled the inventory for 1 month and rated its usefulness on a 10cm visual analogue scale (VAS). The number of referrals to other health care professionals was recorded during this month. RESULTS: Expert consultation and focus group discussions led to the generation of a 41-item inventory. Following face validity and readability testing, several items were modified. Individual item test re-test reliability was between .51 to 1 with the majority (34 items) scoring .0.70. During the testing phase, 211 surveys were collected in the 1 month trial. Tiredness (45.5%), poor sleep (27.5%) back pain (19.5%) and nausea (12.6%) were experienced often. Among the women surveyed, 16.2% claimed to sometimes or often be incontinent. Referrals to the incontinence nurse increased > 8 fold during the study period. The median rating by midwives of the ‘usefulness’ of the inventory was 8.4 (range 0.9 to 10). CONCLUSIONS: The Pregnancy Symptoms Inventory (PSI) was well accepted by women in the 1 month trial and may be a useful tool for pregnancy care providers and aids clinicians in early detection and subsequent treatment of symptoms. It shows promise for use in the research community for assessing the impact of lifestyle intervention in pregnancy.

Redland Youth Space development: evaluation report

This report provides an evaluation of the Capalaba Youth Space.The evaluation included elements of process and impact evaluation and used a participatory action research approach informed by engagement processes, focus groups, a community survey, interviews and secondary analysis of existing data.

Exploring the impact of entrepreneur optimism on the new venture process

By integrating two theoretical foundations of entrepreneurship research, behaviour and process, this conceptual paper proposes a new model to examine the behaviour of the entrepreneur across the new venture development process. Existing macro level research on the new venture creation process recognises the entrepreneur as a central agent in the process yet generally avoids, at each stage of the process, an examination of the micro level psychological experiences of the individual entrepreneur. Similarly, behavioural research examining entrepreneur individual differences has failed to systematically explore the emotion and behaviour of the entrepreneur across the cycle of the new venture creation process. We propose a conceptual framework to integrate the new venture creation process of opportunity discovery, evaluation and exploitation, with the psychological capital (efficacy, hope, resilience and optimism) of the individual entrepreneur. Propositions for future research to facilitate deeper insight into the impact of entrepreneur behaviour on the new venture creation process and ultimately the success or failure of the new venture are provided.